Initializing AMReX (26.04-116-g93329ebb8af9)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.04-116-g93329ebb8af9) initialized Successfully read inputs file ... ERF git hash: 8154a301 AMReX git hash: 26.04-116-g93329ebb8a Problem name (from inputs file) is Ekman Spiral Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (1,1,399) (0,0,0)) ((2,0,0) (3,1,399) (0,0,0)) ((0,2,0) (1,3,399) (0,0,0)) ((2,2,0) (3,3,399) (0,0,0)) ) max of zphys_nd 5000 max of zlevels 5000 Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937246 Fixed dt at level 0 is: 0.5 smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.008 Writing native checkpoint EkmanSpiral_restart_chk00000 Checkpoint write time = 0.025999852 seconds. Writing native 3D plotfile EkmanSpiral_restart_plt00000 3DPlotfile write time = 0.028144036 seconds. TIME= 0 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937246 Fixed dt at level 0 is: 0.5 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.5 with dt = 0.5 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1666666666667 No-substepping time integration at level 0 to 0.1666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0 to 0.1666666666667 with dt = 0.1666666666667 using RHS created at 0 Making slow rhs at time 0.1666666666667 for fast variables advancing from 0 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.25 Time integration of scalars at level 0 from 0 to 0.25 with dt = 0.25 using RHS created at 0.1666666666667 Making slow rhs at time 0.25 for fast variables advancing from 0 to 0.5 No-substepping time integration at level 0 to 0.5 with dt = 0.5 Time integration of scalars at level 0 from 0 to 0.5 with dt = 0.5 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 6400 cells Coarse STEP 1 ends. TIME = 0.5 DT = 0.5 Timestep time = 0.149437278 seconds. TIME= 0.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.780993726 Fixed dt at level 0 is: 0.5 [Level 0 step 2] ADVANCE from elapsed time = 0.5 to 1 with dt = 0.5 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.6666666666667 No-substepping time integration at level 0 to 0.6666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0.5 to 0.6666666666667 with dt = 0.1666666666667 using RHS created at 0.5 Making slow rhs at time 0.6666666666667 for fast variables advancing from 0.5 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.25 Time integration of scalars at level 0 from 0.5 to 0.75 with dt = 0.25 using RHS created at 0.6666666666667 Making slow rhs at time 0.75 for fast variables advancing from 0.5 to 1 No-substepping time integration at level 0 to 1 with dt = 0.5 Time integration of scalars at level 0 from 0.5 to 1 with dt = 0.5 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 6400 cells Coarse STEP 2 ends. TIME = 1 DT = 0.5 Timestep time = 0.143251156 seconds. TIME= 1 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937273 Fixed dt at level 0 is: 0.5 [Level 0 step 3] ADVANCE from elapsed time = 1 to 1.5 with dt = 0.5 Making slow rhs at time 1 for fast variables advancing from 1 to 1.166666666667 No-substepping time integration at level 0 to 1.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1 to 1.166666666667 with dt = 0.1666666666667 using RHS created at 1 Making slow rhs at time 1.166666666667 for fast variables advancing from 1 to 1.25 No-substepping time integration at level 0 to 1.25 with dt = 0.25 Time integration of scalars at level 0 from 1 to 1.25 with dt = 0.25 using RHS created at 1.166666666667 Making slow rhs at time 1.25 for fast variables advancing from 1 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.5 Time integration of scalars at level 0 from 1 to 1.5 with dt = 0.5 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 6400 cells Coarse STEP 3 ends. TIME = 1.5 DT = 0.5 Timestep time = 0.143337287 seconds. TIME= 1.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.7809937287 Fixed dt at level 0 is: 0.5 [Level 0 step 4] ADVANCE from elapsed time = 1.5 to 2 with dt = 0.5 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.666666666667 No-substepping time integration at level 0 to 1.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1.5 to 1.666666666667 with dt = 0.1666666666667 using RHS created at 1.5 Making slow rhs at time 1.666666666667 for fast variables advancing from 1.5 to 1.75 No-substepping time integration at level 0 to 1.75 with dt = 0.25 Time integration of scalars at level 0 from 1.5 to 1.75 with dt = 0.25 using RHS created at 1.666666666667 Making slow rhs at time 1.75 for fast variables advancing from 1.5 to 2 No-substepping time integration at level 0 to 2 with dt = 0.5 Time integration of scalars at level 0 from 1.5 to 2 with dt = 0.5 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 6400 cells Coarse STEP 4 ends. TIME = 2 DT = 0.5 Timestep time = 0.143195465 seconds. TIME= 2 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.78099373 Fixed dt at level 0 is: 0.5 [Level 0 step 5] ADVANCE from elapsed time = 2 to 2.5 with dt = 0.5 Making slow rhs at time 2 for fast variables advancing from 2 to 2.166666666667 No-substepping time integration at level 0 to 2.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2 to 2.166666666667 with dt = 0.1666666666667 using RHS created at 2 Making slow rhs at time 2.166666666667 for fast variables advancing from 2 to 2.25 No-substepping time integration at level 0 to 2.25 with dt = 0.25 Time integration of scalars at level 0 from 2 to 2.25 with dt = 0.25 using RHS created at 2.166666666667 Making slow rhs at time 2.25 for fast variables advancing from 2 to 2.5 No-substepping time integration at level 0 to 2.5 with dt = 0.5 Time integration of scalars at level 0 from 2 to 2.5 with dt = 0.5 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 6400 cells Coarse STEP 5 ends. TIME = 2.5 DT = 0.5 Timestep time = 0.143196491 seconds. TIME= 2.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.7809937314 Fixed dt at level 0 is: 0.5 [Level 0 step 6] ADVANCE from elapsed time = 2.5 to 3 with dt = 0.5 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.666666666667 No-substepping time integration at level 0 to 2.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2.5 to 2.666666666667 with dt = 0.1666666666667 using RHS created at 2.5 Making slow rhs at time 2.666666666667 for fast variables advancing from 2.5 to 2.75 No-substepping time integration at level 0 to 2.75 with dt = 0.25 Time integration of scalars at level 0 from 2.5 to 2.75 with dt = 0.25 using RHS created at 2.666666666667 Making slow rhs at time 2.75 for fast variables advancing from 2.5 to 3 No-substepping time integration at level 0 to 3 with dt = 0.5 Time integration of scalars at level 0 from 2.5 to 3 with dt = 0.5 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 6400 cells Coarse STEP 6 ends. TIME = 3 DT = 0.5 Timestep time = 0.143258128 seconds. TIME= 3 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937327 Fixed dt at level 0 is: 0.5 [Level 0 step 7] ADVANCE from elapsed time = 3 to 3.5 with dt = 0.5 Making slow rhs at time 3 for fast variables advancing from 3 to 3.166666666667 No-substepping time integration at level 0 to 3.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3 to 3.166666666667 with dt = 0.1666666666667 using RHS created at 3 Making slow rhs at time 3.166666666667 for fast variables advancing from 3 to 3.25 No-substepping time integration at level 0 to 3.25 with dt = 0.25 Time integration of scalars at level 0 from 3 to 3.25 with dt = 0.25 using RHS created at 3.166666666667 Making slow rhs at time 3.25 for fast variables advancing from 3 to 3.5 No-substepping time integration at level 0 to 3.5 with dt = 0.5 Time integration of scalars at level 0 from 3 to 3.5 with dt = 0.5 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 6400 cells Coarse STEP 7 ends. TIME = 3.5 DT = 0.5 Timestep time = 0.143193751 seconds. TIME= 3.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937341 Fixed dt at level 0 is: 0.5 [Level 0 step 8] ADVANCE from elapsed time = 3.5 to 4 with dt = 0.5 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.666666666667 No-substepping time integration at level 0 to 3.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3.5 to 3.666666666667 with dt = 0.1666666666667 using RHS created at 3.5 Making slow rhs at time 3.666666666667 for fast variables advancing from 3.5 to 3.75 No-substepping time integration at level 0 to 3.75 with dt = 0.25 Time integration of scalars at level 0 from 3.5 to 3.75 with dt = 0.25 using RHS created at 3.666666666667 Making slow rhs at time 3.75 for fast variables advancing from 3.5 to 4 No-substepping time integration at level 0 to 4 with dt = 0.5 Time integration of scalars at level 0 from 3.5 to 4 with dt = 0.5 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 6400 cells Coarse STEP 8 ends. TIME = 4 DT = 0.5 Timestep time = 0.143172556 seconds. TIME= 4 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937355 Fixed dt at level 0 is: 0.5 [Level 0 step 9] ADVANCE from elapsed time = 4 to 4.5 with dt = 0.5 Making slow rhs at time 4 for fast variables advancing from 4 to 4.166666666667 No-substepping time integration at level 0 to 4.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4 to 4.166666666667 with dt = 0.1666666666667 using RHS created at 4 Making slow rhs at time 4.166666666667 for fast variables advancing from 4 to 4.25 No-substepping time integration at level 0 to 4.25 with dt = 0.25 Time integration of scalars at level 0 from 4 to 4.25 with dt = 0.25 using RHS created at 4.166666666667 Making slow rhs at time 4.25 for fast variables advancing from 4 to 4.5 No-substepping time integration at level 0 to 4.5 with dt = 0.5 Time integration of scalars at level 0 from 4 to 4.5 with dt = 0.5 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 6400 cells Coarse STEP 9 ends. TIME = 4.5 DT = 0.5 Timestep time = 0.143195764 seconds. TIME= 4.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937368 Fixed dt at level 0 is: 0.5 [Level 0 step 10] ADVANCE from elapsed time = 4.5 to 5 with dt = 0.5 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.666666666667 No-substepping time integration at level 0 to 4.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4.5 to 4.666666666667 with dt = 0.1666666666667 using RHS created at 4.5 Making slow rhs at time 4.666666666667 for fast variables advancing from 4.5 to 4.75 No-substepping time integration at level 0 to 4.75 with dt = 0.25 Time integration of scalars at level 0 from 4.5 to 4.75 with dt = 0.25 using RHS created at 4.666666666667 Making slow rhs at time 4.75 for fast variables advancing from 4.5 to 5 No-substepping time integration at level 0 to 5 with dt = 0.5 Time integration of scalars at level 0 from 4.5 to 5 with dt = 0.5 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 6400 cells Coarse STEP 10 ends. TIME = 5 DT = 0.5 Timestep time = 0.143228697 seconds. TIME= 5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937382 Fixed dt at level 0 is: 0.5 [Level 0 step 11] ADVANCE from elapsed time = 5 to 5.5 with dt = 0.5 Making slow rhs at time 5 for fast variables advancing from 5 to 5.166666666667 No-substepping time integration at level 0 to 5.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5 to 5.166666666667 with dt = 0.1666666666667 using RHS created at 5 Making slow rhs at time 5.166666666667 for fast variables advancing from 5 to 5.25 No-substepping time integration at level 0 to 5.25 with dt = 0.25 Time integration of scalars at level 0 from 5 to 5.25 with dt = 0.25 using RHS created at 5.166666666667 Making slow rhs at time 5.25 for fast variables advancing from 5 to 5.5 No-substepping time integration at level 0 to 5.5 with dt = 0.5 Time integration of scalars at level 0 from 5 to 5.5 with dt = 0.5 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 6400 cells Coarse STEP 11 ends. TIME = 5.5 DT = 0.5 Timestep time = 0.143209302 seconds. TIME= 5.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937395 Fixed dt at level 0 is: 0.5 [Level 0 step 12] ADVANCE from elapsed time = 5.5 to 6 with dt = 0.5 Making slow rhs at time 5.5 for fast variables advancing from 5.5 to 5.666666666667 No-substepping time integration at level 0 to 5.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5.5 to 5.666666666667 with dt = 0.1666666666667 using RHS created at 5.5 Making slow rhs at time 5.666666666667 for fast variables advancing from 5.5 to 5.75 No-substepping time integration at level 0 to 5.75 with dt = 0.25 Time integration of scalars at level 0 from 5.5 to 5.75 with dt = 0.25 using RHS created at 5.666666666667 Making slow rhs at time 5.75 for fast variables advancing from 5.5 to 6 No-substepping time integration at level 0 to 6 with dt = 0.5 Time integration of scalars at level 0 from 5.5 to 6 with dt = 0.5 using RHS created at 5.75 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 6400 cells Coarse STEP 12 ends. TIME = 6 DT = 0.5 Timestep time = 0.143193096 seconds. TIME= 6 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937409 Fixed dt at level 0 is: 0.5 [Level 0 step 13] ADVANCE from elapsed time = 6 to 6.5 with dt = 0.5 Making slow rhs at time 6 for fast variables advancing from 6 to 6.166666666667 No-substepping time integration at level 0 to 6.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6 to 6.166666666667 with dt = 0.1666666666667 using RHS created at 6 Making slow rhs at time 6.166666666667 for fast variables advancing from 6 to 6.25 No-substepping time integration at level 0 to 6.25 with dt = 0.25 Time integration of scalars at level 0 from 6 to 6.25 with dt = 0.25 using RHS created at 6.166666666667 Making slow rhs at time 6.25 for fast variables advancing from 6 to 6.5 No-substepping time integration at level 0 to 6.5 with dt = 0.5 Time integration of scalars at level 0 from 6 to 6.5 with dt = 0.5 using RHS created at 6.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 6400 cells Coarse STEP 13 ends. TIME = 6.5 DT = 0.5 Timestep time = 0.143233014 seconds. TIME= 6.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937423 Fixed dt at level 0 is: 0.5 [Level 0 step 14] ADVANCE from elapsed time = 6.5 to 7 with dt = 0.5 Making slow rhs at time 6.5 for fast variables advancing from 6.5 to 6.666666666667 No-substepping time integration at level 0 to 6.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6.5 to 6.666666666667 with dt = 0.1666666666667 using RHS created at 6.5 Making slow rhs at time 6.666666666667 for fast variables advancing from 6.5 to 6.75 No-substepping time integration at level 0 to 6.75 with dt = 0.25 Time integration of scalars at level 0 from 6.5 to 6.75 with dt = 0.25 using RHS created at 6.666666666667 Making slow rhs at time 6.75 for fast variables advancing from 6.5 to 7 No-substepping time integration at level 0 to 7 with dt = 0.5 Time integration of scalars at level 0 from 6.5 to 7 with dt = 0.5 using RHS created at 6.75 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 6400 cells Coarse STEP 14 ends. TIME = 7 DT = 0.5 Timestep time = 0.143200811 seconds. TIME= 7 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937436 Fixed dt at level 0 is: 0.5 [Level 0 step 15] ADVANCE from elapsed time = 7 to 7.5 with dt = 0.5 Making slow rhs at time 7 for fast variables advancing from 7 to 7.166666666667 No-substepping time integration at level 0 to 7.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7 to 7.166666666667 with dt = 0.1666666666667 using RHS created at 7 Making slow rhs at time 7.166666666667 for fast variables advancing from 7 to 7.25 No-substepping time integration at level 0 to 7.25 with dt = 0.25 Time integration of scalars at level 0 from 7 to 7.25 with dt = 0.25 using RHS created at 7.166666666667 Making slow rhs at time 7.25 for fast variables advancing from 7 to 7.5 No-substepping time integration at level 0 to 7.5 with dt = 0.5 Time integration of scalars at level 0 from 7 to 7.5 with dt = 0.5 using RHS created at 7.25 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 6400 cells Coarse STEP 15 ends. TIME = 7.5 DT = 0.5 Timestep time = 0.143190487 seconds. TIME= 7.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.780993745 Fixed dt at level 0 is: 0.5 [Level 0 step 16] ADVANCE from elapsed time = 7.5 to 8 with dt = 0.5 Making slow rhs at time 7.5 for fast variables advancing from 7.5 to 7.666666666667 No-substepping time integration at level 0 to 7.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7.5 to 7.666666666667 with dt = 0.1666666666667 using RHS created at 7.5 Making slow rhs at time 7.666666666667 for fast variables advancing from 7.5 to 7.75 No-substepping time integration at level 0 to 7.75 with dt = 0.25 Time integration of scalars at level 0 from 7.5 to 7.75 with dt = 0.25 using RHS created at 7.666666666667 Making slow rhs at time 7.75 for fast variables advancing from 7.5 to 8 No-substepping time integration at level 0 to 8 with dt = 0.5 Time integration of scalars at level 0 from 7.5 to 8 with dt = 0.5 using RHS created at 7.75 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 6400 cells Coarse STEP 16 ends. TIME = 8 DT = 0.5 Timestep time = 0.143155485 seconds. TIME= 8 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937463 Fixed dt at level 0 is: 0.5 [Level 0 step 17] ADVANCE from elapsed time = 8 to 8.5 with dt = 0.5 Making slow rhs at time 8 for fast variables advancing from 8 to 8.166666666667 No-substepping time integration at level 0 to 8.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8 to 8.166666666667 with dt = 0.1666666666667 using RHS created at 8 Making slow rhs at time 8.166666666667 for fast variables advancing from 8 to 8.25 No-substepping time integration at level 0 to 8.25 with dt = 0.25 Time integration of scalars at level 0 from 8 to 8.25 with dt = 0.25 using RHS created at 8.166666666667 Making slow rhs at time 8.25 for fast variables advancing from 8 to 8.5 No-substepping time integration at level 0 to 8.5 with dt = 0.5 Time integration of scalars at level 0 from 8 to 8.5 with dt = 0.5 using RHS created at 8.25 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 6400 cells Coarse STEP 17 ends. TIME = 8.5 DT = 0.5 Timestep time = 0.14316429 seconds. TIME= 8.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937477 Fixed dt at level 0 is: 0.5 [Level 0 step 18] ADVANCE from elapsed time = 8.5 to 9 with dt = 0.5 Making slow rhs at time 8.5 for fast variables advancing from 8.5 to 8.666666666667 No-substepping time integration at level 0 to 8.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8.5 to 8.666666666667 with dt = 0.1666666666667 using RHS created at 8.5 Making slow rhs at time 8.666666666667 for fast variables advancing from 8.5 to 8.75 No-substepping time integration at level 0 to 8.75 with dt = 0.25 Time integration of scalars at level 0 from 8.5 to 8.75 with dt = 0.25 using RHS created at 8.666666666667 Making slow rhs at time 8.75 for fast variables advancing from 8.5 to 9 No-substepping time integration at level 0 to 9 with dt = 0.5 Time integration of scalars at level 0 from 8.5 to 9 with dt = 0.5 using RHS created at 8.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 6400 cells Coarse STEP 18 ends. TIME = 9 DT = 0.5 Timestep time = 0.143159363 seconds. TIME= 9 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.780993749 Fixed dt at level 0 is: 0.5 [Level 0 step 19] ADVANCE from elapsed time = 9 to 9.5 with dt = 0.5 Making slow rhs at time 9 for fast variables advancing from 9 to 9.166666666667 No-substepping time integration at level 0 to 9.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9 to 9.166666666667 with dt = 0.1666666666667 using RHS created at 9 Making slow rhs at time 9.166666666667 for fast variables advancing from 9 to 9.25 No-substepping time integration at level 0 to 9.25 with dt = 0.25 Time integration of scalars at level 0 from 9 to 9.25 with dt = 0.25 using RHS created at 9.166666666667 Making slow rhs at time 9.25 for fast variables advancing from 9 to 9.5 No-substepping time integration at level 0 to 9.5 with dt = 0.5 Time integration of scalars at level 0 from 9 to 9.5 with dt = 0.5 using RHS created at 9.25 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 6400 cells Coarse STEP 19 ends. TIME = 9.5 DT = 0.5 Timestep time = 0.143184371 seconds. TIME= 9.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937504 Fixed dt at level 0 is: 0.5 [Level 0 step 20] ADVANCE from elapsed time = 9.5 to 10 with dt = 0.5 Making slow rhs at time 9.5 for fast variables advancing from 9.5 to 9.666666666667 No-substepping time integration at level 0 to 9.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9.5 to 9.666666666667 with dt = 0.1666666666667 using RHS created at 9.5 Making slow rhs at time 9.666666666667 for fast variables advancing from 9.5 to 9.75 No-substepping time integration at level 0 to 9.75 with dt = 0.25 Time integration of scalars at level 0 from 9.5 to 9.75 with dt = 0.25 using RHS created at 9.666666666667 Making slow rhs at time 9.75 for fast variables advancing from 9.5 to 10 No-substepping time integration at level 0 to 10 with dt = 0.5 Time integration of scalars at level 0 from 9.5 to 10 with dt = 0.5 using RHS created at 9.75 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 6400 cells Coarse STEP 20 ends. TIME = 10 DT = 0.5 Timestep time = 0.143168776 seconds. TIME= 10 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937518 Fixed dt at level 0 is: 0.5 [Level 0 step 21] ADVANCE from elapsed time = 10 to 10.5 with dt = 0.5 Making slow rhs at time 10 for fast variables advancing from 10 to 10.16666666667 No-substepping time integration at level 0 to 10.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10 to 10.16666666667 with dt = 0.1666666666667 using RHS created at 10 Making slow rhs at time 10.16666666667 for fast variables advancing from 10 to 10.25 No-substepping time integration at level 0 to 10.25 with dt = 0.25 Time integration of scalars at level 0 from 10 to 10.25 with dt = 0.25 using RHS created at 10.16666666667 Making slow rhs at time 10.25 for fast variables advancing from 10 to 10.5 No-substepping time integration at level 0 to 10.5 with dt = 0.5 Time integration of scalars at level 0 from 10 to 10.5 with dt = 0.5 using RHS created at 10.25 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 6400 cells Coarse STEP 21 ends. TIME = 10.5 DT = 0.5 Timestep time = 0.143177459 seconds. TIME= 10.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937531 Fixed dt at level 0 is: 0.5 [Level 0 step 22] ADVANCE from elapsed time = 10.5 to 11 with dt = 0.5 Making slow rhs at time 10.5 for fast variables advancing from 10.5 to 10.66666666667 No-substepping time integration at level 0 to 10.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10.5 to 10.66666666667 with dt = 0.1666666666667 using RHS created at 10.5 Making slow rhs at time 10.66666666667 for fast variables advancing from 10.5 to 10.75 No-substepping time integration at level 0 to 10.75 with dt = 0.25 Time integration of scalars at level 0 from 10.5 to 10.75 with dt = 0.25 using RHS created at 10.66666666667 Making slow rhs at time 10.75 for fast variables advancing from 10.5 to 11 No-substepping time integration at level 0 to 11 with dt = 0.5 Time integration of scalars at level 0 from 10.5 to 11 with dt = 0.5 using RHS created at 10.75 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 6400 cells Coarse STEP 22 ends. TIME = 11 DT = 0.5 Timestep time = 0.14316772 seconds. TIME= 11 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937545 Fixed dt at level 0 is: 0.5 [Level 0 step 23] ADVANCE from elapsed time = 11 to 11.5 with dt = 0.5 Making slow rhs at time 11 for fast variables advancing from 11 to 11.16666666667 No-substepping time integration at level 0 to 11.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11 to 11.16666666667 with dt = 0.1666666666667 using RHS created at 11 Making slow rhs at time 11.16666666667 for fast variables advancing from 11 to 11.25 No-substepping time integration at level 0 to 11.25 with dt = 0.25 Time integration of scalars at level 0 from 11 to 11.25 with dt = 0.25 using RHS created at 11.16666666667 Making slow rhs at time 11.25 for fast variables advancing from 11 to 11.5 No-substepping time integration at level 0 to 11.5 with dt = 0.5 Time integration of scalars at level 0 from 11 to 11.5 with dt = 0.5 using RHS created at 11.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 6400 cells Coarse STEP 23 ends. TIME = 11.5 DT = 0.5 Timestep time = 0.143163343 seconds. TIME= 11.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937558 Fixed dt at level 0 is: 0.5 [Level 0 step 24] ADVANCE from elapsed time = 11.5 to 12 with dt = 0.5 Making slow rhs at time 11.5 for fast variables advancing from 11.5 to 11.66666666667 No-substepping time integration at level 0 to 11.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11.5 to 11.66666666667 with dt = 0.1666666666667 using RHS created at 11.5 Making slow rhs at time 11.66666666667 for fast variables advancing from 11.5 to 11.75 No-substepping time integration at level 0 to 11.75 with dt = 0.25 Time integration of scalars at level 0 from 11.5 to 11.75 with dt = 0.25 using RHS created at 11.66666666667 Making slow rhs at time 11.75 for fast variables advancing from 11.5 to 12 No-substepping time integration at level 0 to 12 with dt = 0.5 Time integration of scalars at level 0 from 11.5 to 12 with dt = 0.5 using RHS created at 11.75 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 6400 cells Coarse STEP 24 ends. TIME = 12 DT = 0.5 Timestep time = 0.143156542 seconds. TIME= 12 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937572 Fixed dt at level 0 is: 0.5 [Level 0 step 25] ADVANCE from elapsed time = 12 to 12.5 with dt = 0.5 Making slow rhs at time 12 for fast variables advancing from 12 to 12.16666666667 No-substepping time integration at level 0 to 12.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12 to 12.16666666667 with dt = 0.1666666666667 using RHS created at 12 Making slow rhs at time 12.16666666667 for fast variables advancing from 12 to 12.25 No-substepping time integration at level 0 to 12.25 with dt = 0.25 Time integration of scalars at level 0 from 12 to 12.25 with dt = 0.25 using RHS created at 12.16666666667 Making slow rhs at time 12.25 for fast variables advancing from 12 to 12.5 No-substepping time integration at level 0 to 12.5 with dt = 0.5 Time integration of scalars at level 0 from 12 to 12.5 with dt = 0.5 using RHS created at 12.25 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 6400 cells Coarse STEP 25 ends. TIME = 12.5 DT = 0.5 Timestep time = 0.143173441 seconds. TIME= 12.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Writing native checkpoint EkmanSpiral_restart_chk00025 Checkpoint write time = 0.027940115 seconds. Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937585 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666666667 No-substepping time integration at level 0 to 12.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 using RHS created at 12.5 Making slow rhs at time 12.66666666667 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666666667 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 6400 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.143191767 seconds. TIME= 13 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937599 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666666667 No-substepping time integration at level 0 to 13.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 using RHS created at 13 Making slow rhs at time 13.16666666667 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666666667 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 6400 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.143373654 seconds. TIME= 13.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937613 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666666667 No-substepping time integration at level 0 to 13.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 using RHS created at 13.5 Making slow rhs at time 13.66666666667 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666666667 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 6400 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.143170015 seconds. TIME= 14 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937626 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666666667 No-substepping time integration at level 0 to 14.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 using RHS created at 14 Making slow rhs at time 14.16666666667 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666666667 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 6400 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.143130201 seconds. TIME= 14.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.780993764 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666666667 No-substepping time integration at level 0 to 14.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 using RHS created at 14.5 Making slow rhs at time 14.66666666667 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666666667 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 6400 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.143177166 seconds. TIME= 15 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937653 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666666667 No-substepping time integration at level 0 to 15.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 using RHS created at 15 Making slow rhs at time 15.16666666667 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666666667 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 6400 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.143190488 seconds. TIME= 15.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937667 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666666667 No-substepping time integration at level 0 to 15.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 using RHS created at 15.5 Making slow rhs at time 15.66666666667 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666666667 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 6400 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.143167696 seconds. TIME= 16 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937681 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666666667 No-substepping time integration at level 0 to 16.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 using RHS created at 16 Making slow rhs at time 16.16666666667 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666666667 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 6400 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.143186487 seconds. TIME= 16.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937694 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666666667 No-substepping time integration at level 0 to 16.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 using RHS created at 16.5 Making slow rhs at time 16.66666666667 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666666667 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 6400 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.14316808 seconds. TIME= 17 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937708 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666666667 No-substepping time integration at level 0 to 17.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 using RHS created at 17 Making slow rhs at time 17.16666666667 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666666667 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 6400 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.143180569 seconds. TIME= 17.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937721 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666666667 No-substepping time integration at level 0 to 17.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 using RHS created at 17.5 Making slow rhs at time 17.66666666667 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666666667 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 6400 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.143170766 seconds. TIME= 18 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937735 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666666667 No-substepping time integration at level 0 to 18.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 using RHS created at 18 Making slow rhs at time 18.16666666667 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666666667 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 6400 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.143204671 seconds. TIME= 18.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937748 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666666667 No-substepping time integration at level 0 to 18.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 using RHS created at 18.5 Making slow rhs at time 18.66666666667 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666666667 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 6400 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.143186333 seconds. TIME= 19 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937762 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666666667 No-substepping time integration at level 0 to 19.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 using RHS created at 19 Making slow rhs at time 19.16666666667 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666666667 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 6400 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.143187352 seconds. TIME= 19.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937776 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666666667 No-substepping time integration at level 0 to 19.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 using RHS created at 19.5 Making slow rhs at time 19.66666666667 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666666667 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 6400 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.143102997 seconds. TIME= 20 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937789 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666666667 No-substepping time integration at level 0 to 20.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 using RHS created at 20 Making slow rhs at time 20.16666666667 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666666667 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 6400 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.143289707 seconds. TIME= 20.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937803 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666666667 No-substepping time integration at level 0 to 20.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 using RHS created at 20.5 Making slow rhs at time 20.66666666667 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666666667 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 6400 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.143163059 seconds. TIME= 21 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937816 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666666667 No-substepping time integration at level 0 to 21.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 using RHS created at 21 Making slow rhs at time 21.16666666667 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666666667 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 6400 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.143200581 seconds. TIME= 21.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.780993783 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666666667 No-substepping time integration at level 0 to 21.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 using RHS created at 21.5 Making slow rhs at time 21.66666666667 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666666667 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 6400 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.143187613 seconds. TIME= 22 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937844 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666666667 No-substepping time integration at level 0 to 22.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 using RHS created at 22 Making slow rhs at time 22.16666666667 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666666667 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 6400 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.143195382 seconds. TIME= 22.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937857 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666666667 No-substepping time integration at level 0 to 22.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 using RHS created at 22.5 Making slow rhs at time 22.66666666667 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666666667 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 6400 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.143172308 seconds. TIME= 23 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937871 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666666667 No-substepping time integration at level 0 to 23.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 using RHS created at 23 Making slow rhs at time 23.16666666667 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666666667 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 6400 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.143185655 seconds. TIME= 23.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937884 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666666667 No-substepping time integration at level 0 to 23.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 using RHS created at 23.5 Making slow rhs at time 23.66666666667 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666666667 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 6400 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.14317551 seconds. TIME= 24 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937898 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666666667 No-substepping time integration at level 0 to 24.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 using RHS created at 24 Making slow rhs at time 24.16666666667 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666666667 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 6400 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.143205882 seconds. TIME= 24.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519519 Anelastic dt at level 0 would be: 0.7809937911 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666666667 No-substepping time integration at level 0 to 24.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 using RHS created at 24.5 Making slow rhs at time 24.66666666667 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666666667 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 6400 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.14311419 seconds. TIME= 25 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Writing native checkpoint EkmanSpiral_restart_chk00050 Checkpoint write time = 0.027491251 seconds. Writing native 3D plotfile EkmanSpiral_restart_plt00050 3DPlotfile write time = 0.053971174 seconds. Total Time: 8.123178358 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [1] Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [7243 ... 7271] [The Arena] max space (MB) allocated spread across MPI: [25 ... 25] [The Arena] max space (MB) used spread across MPI: [19 ... 19] [The Device Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Device Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [1 ... 1] AMReX (26.04-116-g93329ebb8af9) finalized Initializing AMReX (26.04-116-g93329ebb8af9)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.04-116-g93329ebb8af9) initialized Successfully read inputs file ... ERF git hash: 8154a301 AMReX git hash: 26.04-116-g93329ebb8a Problem name (from inputs file) is Ekman Spiral Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Restart from native checkpoint EkmanSpiral_restart_chk00025 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (1,1,399) (0,0,0)) ((2,0,0) (3,1,399) (0,0,0)) ((0,2,0) (1,3,399) (0,0,0)) ((2,2,0) (3,3,399) (0,0,0)) ) Reading LMASK data Restart time = 0.098476775 seconds. smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.008 Writing native 3D plotfile EkmanSpiral_restart_plt00025 3DPlotfile write time = 0.021372181 seconds. TIME= 12.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937585 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666666667 No-substepping time integration at level 0 to 12.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 using RHS created at 12.5 Making slow rhs at time 12.66666666667 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666666667 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 6400 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.146904254 seconds. TIME= 13 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937599 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666666667 No-substepping time integration at level 0 to 13.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 using RHS created at 13 Making slow rhs at time 13.16666666667 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666666667 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 6400 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.14324479 seconds. TIME= 13.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937613 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666666667 No-substepping time integration at level 0 to 13.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 using RHS created at 13.5 Making slow rhs at time 13.66666666667 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666666667 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 6400 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.143188369 seconds. TIME= 14 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937626 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666666667 No-substepping time integration at level 0 to 14.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 using RHS created at 14 Making slow rhs at time 14.16666666667 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666666667 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 6400 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.143197346 seconds. TIME= 14.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.780993764 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666666667 No-substepping time integration at level 0 to 14.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 using RHS created at 14.5 Making slow rhs at time 14.66666666667 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666666667 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 6400 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.143197877 seconds. TIME= 15 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937653 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666666667 No-substepping time integration at level 0 to 15.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 using RHS created at 15 Making slow rhs at time 15.16666666667 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666666667 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 6400 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.143189206 seconds. TIME= 15.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937667 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666666667 No-substepping time integration at level 0 to 15.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 using RHS created at 15.5 Making slow rhs at time 15.66666666667 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666666667 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 6400 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.143222606 seconds. TIME= 16 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937681 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666666667 No-substepping time integration at level 0 to 16.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 using RHS created at 16 Making slow rhs at time 16.16666666667 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666666667 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 6400 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.143217777 seconds. TIME= 16.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937694 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666666667 No-substepping time integration at level 0 to 16.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 using RHS created at 16.5 Making slow rhs at time 16.66666666667 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666666667 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 6400 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.143220849 seconds. TIME= 17 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937708 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666666667 No-substepping time integration at level 0 to 17.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 using RHS created at 17 Making slow rhs at time 17.16666666667 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666666667 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 6400 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.143188064 seconds. TIME= 17.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937721 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666666667 No-substepping time integration at level 0 to 17.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 using RHS created at 17.5 Making slow rhs at time 17.66666666667 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666666667 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 6400 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.143198952 seconds. TIME= 18 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937735 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666666667 No-substepping time integration at level 0 to 18.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 using RHS created at 18 Making slow rhs at time 18.16666666667 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666666667 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 6400 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.143172821 seconds. TIME= 18.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937748 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666666667 No-substepping time integration at level 0 to 18.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 using RHS created at 18.5 Making slow rhs at time 18.66666666667 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666666667 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 6400 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.143195144 seconds. TIME= 19 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937762 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666666667 No-substepping time integration at level 0 to 19.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 using RHS created at 19 Making slow rhs at time 19.16666666667 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666666667 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 6400 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.143176456 seconds. TIME= 19.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937776 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666666667 No-substepping time integration at level 0 to 19.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 using RHS created at 19.5 Making slow rhs at time 19.66666666667 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666666667 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 6400 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.143203956 seconds. TIME= 20 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937789 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666666667 No-substepping time integration at level 0 to 20.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 using RHS created at 20 Making slow rhs at time 20.16666666667 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666666667 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 6400 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.143190704 seconds. TIME= 20.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937803 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666666667 No-substepping time integration at level 0 to 20.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 using RHS created at 20.5 Making slow rhs at time 20.66666666667 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666666667 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 6400 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.143193799 seconds. TIME= 21 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937816 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666666667 No-substepping time integration at level 0 to 21.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 using RHS created at 21 Making slow rhs at time 21.16666666667 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666666667 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 6400 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.143162848 seconds. TIME= 21.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.780993783 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666666667 No-substepping time integration at level 0 to 21.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 using RHS created at 21.5 Making slow rhs at time 21.66666666667 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666666667 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 6400 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.14318503 seconds. TIME= 22 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937844 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666666667 No-substepping time integration at level 0 to 22.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 using RHS created at 22 Making slow rhs at time 22.16666666667 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666666667 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 6400 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.14319763 seconds. TIME= 22.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937857 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666666667 No-substepping time integration at level 0 to 22.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 using RHS created at 22.5 Making slow rhs at time 22.66666666667 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666666667 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 6400 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.143222958 seconds. TIME= 23 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937871 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666666667 No-substepping time integration at level 0 to 23.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 using RHS created at 23 Making slow rhs at time 23.16666666667 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666666667 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 6400 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.143206189 seconds. TIME= 23.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937884 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666666667 No-substepping time integration at level 0 to 23.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 using RHS created at 23.5 Making slow rhs at time 23.66666666667 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666666667 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 6400 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.143237595 seconds. TIME= 24 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937898 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666666667 No-substepping time integration at level 0 to 24.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 using RHS created at 24 Making slow rhs at time 24.16666666667 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666666667 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 6400 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.143212301 seconds. TIME= 24.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519519 Anelastic dt at level 0 would be: 0.7809937911 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666666667 No-substepping time integration at level 0 to 24.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 using RHS created at 24.5 Making slow rhs at time 24.66666666667 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666666667 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 6400 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.143192098 seconds. TIME= 25 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Writing native 3D plotfile EkmanSpiral_restart_plt00050 3DPlotfile write time = 0.019681762 seconds. Writing native checkpoint EkmanSpiral_restart_chk00050 Checkpoint write time = 0.021084845 seconds. Total Time: 4.112216053 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [7243 ... 7303] [The Arena] max space (MB) allocated spread across MPI: [25 ... 25] [The Arena] max space (MB) used spread across MPI: [19 ... 19] [The Device Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Device Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [1 ... 1] AMReX (26.04-116-g93329ebb8af9) finalized