Initializing AMReX (26.04-83-g515ed5e0f061)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.04-83-g515ed5e0f061) initialized Successfully read inputs file ... ERF git hash: 44ef8a40 AMReX git hash: 26.04-83-g515ed5e0f0 Problem name (from inputs file) is ABL Thermal stratification based on gradient of potential temperature Null land surface model! SOLVER CHOICE: At level 0 : compressible with implicit substepping vert_implicit_fac : 0 0 0 use_coriolis : 0 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: None Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 0 Not using any molecular diffusivity, i.e. using the modeled turbulent diffusivity Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using Smagorinsky LES model at level 0 Smagorinsky uses Richardson number correction with Ri_crit = 0.25 Cs : 0.1 isotropic mixing : 1 Pr_t : 0.3333333333 Sc_t : 1 Restart from native checkpoint chk00000_for_restart BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (31,31,63) (0,0,0)) ((32,0,0) (63,31,63) (0,0,0)) ((0,32,0) (31,63,63) (0,0,0)) ((32,32,0) (63,63,63) (0,0,0)) ) Reading LMASK data Restart time = 0.119612418 seconds. Writing native 3D plotfile ABL-Smag_plt00000 3DPlotfile write time = 0.035931595 seconds. TIME= 0 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461055476 Anelastic dt at level 0 would be: 1.58742278 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.1 with dt = 0.1 Making slow rhs at time 0 for fast variables advancing from 0 to 0.03333333333333 Fast time integration at level 0 from 0 to 0.03333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0 to 0.03333333333333 with dt = 0.03333333333333 using RHS created at 0 Making slow rhs at time 0.03333333333333 for fast variables advancing from 0 to 0.05 Fast time integration at level 0 from 0 to 0.025 with dt = 0.025 Fast time integration at level 0 from 0.025 to 0.05 with dt = 0.025 Time integration of scalars at level 0 from 0 to 0.05 with dt = 0.05 using RHS created at 0.03333333333333 Making slow rhs at time 0.05 for fast variables advancing from 0 to 0.1 Fast time integration at level 0 from 0 to 0.025 with dt = 0.025 Fast time integration at level 0 from 0.025 to 0.05 with dt = 0.025 Fast time integration at level 0 from 0.05 to 0.075 with dt = 0.025 Fast time integration at level 0 from 0.075 to 0.1 with dt = 0.025 Time integration of scalars at level 0 from 0 to 0.1 with dt = 0.1 using RHS created at 0.05 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 262144 cells Coarse STEP 1 ends. TIME = 0.1 DT = 0.1 Timestep time = 0.25913109 seconds. TIME= 0.1 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610219714 Anelastic dt at level 0 would be: 1.584977639 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 2] ADVANCE from elapsed time = 0.1 to 0.2 with dt = 0.1 Making slow rhs at time 0.1 for fast variables advancing from 0.1 to 0.1333333333333 Fast time integration at level 0 from 0.1 to 0.1333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.1 to 0.1333333333333 with dt = 0.03333333333333 using RHS created at 0.1 Making slow rhs at time 0.1333333333333 for fast variables advancing from 0.1 to 0.15 Fast time integration at level 0 from 0.1 to 0.125 with dt = 0.025 Fast time integration at level 0 from 0.125 to 0.15 with dt = 0.025 Time integration of scalars at level 0 from 0.1 to 0.15 with dt = 0.05 using RHS created at 0.1333333333333 Making slow rhs at time 0.15 for fast variables advancing from 0.1 to 0.2 Fast time integration at level 0 from 0.1 to 0.125 with dt = 0.025 Fast time integration at level 0 from 0.125 to 0.15 with dt = 0.025 Fast time integration at level 0 from 0.15 to 0.175 with dt = 0.025 Fast time integration at level 0 from 0.175 to 0.2 with dt = 0.025 Time integration of scalars at level 0 from 0.1 to 0.2 with dt = 0.1 using RHS created at 0.15 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 262144 cells Coarse STEP 2 ends. TIME = 0.2 DT = 0.1 Timestep time = 0.250904695 seconds. TIME= 0.2 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610395931 Anelastic dt at level 0 would be: 1.586383545 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 3] ADVANCE from elapsed time = 0.2 to 0.3 with dt = 0.1 Making slow rhs at time 0.2 for fast variables advancing from 0.2 to 0.2333333333333 Fast time integration at level 0 from 0.2 to 0.2333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.2 to 0.2333333333333 with dt = 0.03333333333333 using RHS created at 0.2 Making slow rhs at time 0.2333333333333 for fast variables advancing from 0.2 to 0.25 Fast time integration at level 0 from 0.2 to 0.225 with dt = 0.025 Fast time integration at level 0 from 0.225 to 0.25 with dt = 0.025 Time integration of scalars at level 0 from 0.2 to 0.25 with dt = 0.05 using RHS created at 0.2333333333333 Making slow rhs at time 0.25 for fast variables advancing from 0.2 to 0.3 Fast time integration at level 0 from 0.2 to 0.225 with dt = 0.025 Fast time integration at level 0 from 0.225 to 0.25 with dt = 0.025 Fast time integration at level 0 from 0.25 to 0.275 with dt = 0.025 Fast time integration at level 0 from 0.275 to 0.3 with dt = 0.025 Time integration of scalars at level 0 from 0.2 to 0.3 with dt = 0.1 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 262144 cells Coarse STEP 3 ends. TIME = 0.3 DT = 0.1 Timestep time = 0.250819302 seconds. TIME= 0.3 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610359863 Anelastic dt at level 0 would be: 1.586071334 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 4] ADVANCE from elapsed time = 0.3 to 0.4 with dt = 0.1 Making slow rhs at time 0.3 for fast variables advancing from 0.3 to 0.3333333333333 Fast time integration at level 0 from 0.3 to 0.3333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.3 to 0.3333333333333 with dt = 0.03333333333333 using RHS created at 0.3 Making slow rhs at time 0.3333333333333 for fast variables advancing from 0.3 to 0.35 Fast time integration at level 0 from 0.3 to 0.325 with dt = 0.025 Fast time integration at level 0 from 0.325 to 0.35 with dt = 0.025 Time integration of scalars at level 0 from 0.3 to 0.35 with dt = 0.05 using RHS created at 0.3333333333333 Making slow rhs at time 0.35 for fast variables advancing from 0.3 to 0.4 Fast time integration at level 0 from 0.3 to 0.325 with dt = 0.025 Fast time integration at level 0 from 0.325 to 0.35 with dt = 0.025 Fast time integration at level 0 from 0.35 to 0.375 with dt = 0.025 Fast time integration at level 0 from 0.375 to 0.4 with dt = 0.025 Time integration of scalars at level 0 from 0.3 to 0.4 with dt = 0.1 using RHS created at 0.35 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 262144 cells Coarse STEP 4 ends. TIME = 0.4 DT = 0.1 Timestep time = 0.250828984 seconds. TIME= 0.4 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610456921 Anelastic dt at level 0 would be: 1.586121241 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 5] ADVANCE from elapsed time = 0.4 to 0.5 with dt = 0.1 Making slow rhs at time 0.4 for fast variables advancing from 0.4 to 0.4333333333333 Fast time integration at level 0 from 0.4 to 0.4333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.4 to 0.4333333333333 with dt = 0.03333333333333 using RHS created at 0.4 Making slow rhs at time 0.4333333333333 for fast variables advancing from 0.4 to 0.45 Fast time integration at level 0 from 0.4 to 0.425 with dt = 0.025 Fast time integration at level 0 from 0.425 to 0.45 with dt = 0.025 Time integration of scalars at level 0 from 0.4 to 0.45 with dt = 0.05 using RHS created at 0.4333333333333 Making slow rhs at time 0.45 for fast variables advancing from 0.4 to 0.5 Fast time integration at level 0 from 0.4 to 0.425 with dt = 0.025 Fast time integration at level 0 from 0.425 to 0.45 with dt = 0.025 Fast time integration at level 0 from 0.45 to 0.475 with dt = 0.025 Fast time integration at level 0 from 0.475 to 0.5 with dt = 0.025 Time integration of scalars at level 0 from 0.4 to 0.5 with dt = 0.1 using RHS created at 0.45 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 262144 cells Coarse STEP 5 ends. TIME = 0.5 DT = 0.1 Timestep time = 0.250717994 seconds. TIME= 0.5 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610377279 Anelastic dt at level 0 would be: 1.585858403 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 6] ADVANCE from elapsed time = 0.5 to 0.6 with dt = 0.1 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.5333333333333 Fast time integration at level 0 from 0.5 to 0.5333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.5 to 0.5333333333333 with dt = 0.03333333333333 using RHS created at 0.5 Making slow rhs at time 0.5333333333333 for fast variables advancing from 0.5 to 0.55 Fast time integration at level 0 from 0.5 to 0.525 with dt = 0.025 Fast time integration at level 0 from 0.525 to 0.55 with dt = 0.025 Time integration of scalars at level 0 from 0.5 to 0.55 with dt = 0.05 using RHS created at 0.5333333333333 Making slow rhs at time 0.55 for fast variables advancing from 0.5 to 0.6 Fast time integration at level 0 from 0.5 to 0.525 with dt = 0.025 Fast time integration at level 0 from 0.525 to 0.55 with dt = 0.025 Fast time integration at level 0 from 0.55 to 0.575 with dt = 0.025 Fast time integration at level 0 from 0.575 to 0.6 with dt = 0.025 Time integration of scalars at level 0 from 0.5 to 0.6 with dt = 0.1 using RHS created at 0.55 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 262144 cells Coarse STEP 6 ends. TIME = 0.6 DT = 0.1 Timestep time = 0.250901639 seconds. TIME= 0.6 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610490662 Anelastic dt at level 0 would be: 1.58659602 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 7] ADVANCE from elapsed time = 0.6 to 0.7 with dt = 0.1 Making slow rhs at time 0.6 for fast variables advancing from 0.6 to 0.6333333333333 Fast time integration at level 0 from 0.6 to 0.6333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.6 to 0.6333333333333 with dt = 0.03333333333333 using RHS created at 0.6 Making slow rhs at time 0.6333333333333 for fast variables advancing from 0.6 to 0.65 Fast time integration at level 0 from 0.6 to 0.625 with dt = 0.025 Fast time integration at level 0 from 0.625 to 0.65 with dt = 0.025 Time integration of scalars at level 0 from 0.6 to 0.65 with dt = 0.05 using RHS created at 0.6333333333333 Making slow rhs at time 0.65 for fast variables advancing from 0.6 to 0.7 Fast time integration at level 0 from 0.6 to 0.625 with dt = 0.025 Fast time integration at level 0 from 0.625 to 0.65 with dt = 0.025 Fast time integration at level 0 from 0.65 to 0.675 with dt = 0.025 Fast time integration at level 0 from 0.675 to 0.7 with dt = 0.025 Time integration of scalars at level 0 from 0.6 to 0.7 with dt = 0.1 using RHS created at 0.65 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 262144 cells Coarse STEP 7 ends. TIME = 0.7 DT = 0.1 Timestep time = 0.250849564 seconds. TIME= 0.7 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610501151 Anelastic dt at level 0 would be: 1.586930007 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 8] ADVANCE from elapsed time = 0.7 to 0.8 with dt = 0.1 Making slow rhs at time 0.7 for fast variables advancing from 0.7 to 0.7333333333333 Fast time integration at level 0 from 0.7 to 0.7333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.7 to 0.7333333333333 with dt = 0.03333333333333 using RHS created at 0.7 Making slow rhs at time 0.7333333333333 for fast variables advancing from 0.7 to 0.75 Fast time integration at level 0 from 0.7 to 0.725 with dt = 0.025 Fast time integration at level 0 from 0.725 to 0.75 with dt = 0.025 Time integration of scalars at level 0 from 0.7 to 0.75 with dt = 0.05 using RHS created at 0.7333333333333 Making slow rhs at time 0.75 for fast variables advancing from 0.7 to 0.8 Fast time integration at level 0 from 0.7 to 0.725 with dt = 0.025 Fast time integration at level 0 from 0.725 to 0.75 with dt = 0.025 Fast time integration at level 0 from 0.75 to 0.775 with dt = 0.025 Fast time integration at level 0 from 0.775 to 0.8 with dt = 0.025 Time integration of scalars at level 0 from 0.7 to 0.8 with dt = 0.1 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 262144 cells Coarse STEP 8 ends. TIME = 0.8 DT = 0.1 Timestep time = 0.250804879 seconds. TIME= 0.8 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610504115 Anelastic dt at level 0 would be: 1.586812858 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 9] ADVANCE from elapsed time = 0.8 to 0.9 with dt = 0.1 Making slow rhs at time 0.8 for fast variables advancing from 0.8 to 0.8333333333333 Fast time integration at level 0 from 0.8 to 0.8333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.8 to 0.8333333333333 with dt = 0.03333333333333 using RHS created at 0.8 Making slow rhs at time 0.8333333333333 for fast variables advancing from 0.8 to 0.85 Fast time integration at level 0 from 0.8 to 0.825 with dt = 0.025 Fast time integration at level 0 from 0.825 to 0.85 with dt = 0.025 Time integration of scalars at level 0 from 0.8 to 0.85 with dt = 0.05 using RHS created at 0.8333333333333 Making slow rhs at time 0.85 for fast variables advancing from 0.8 to 0.9 Fast time integration at level 0 from 0.8 to 0.825 with dt = 0.025 Fast time integration at level 0 from 0.825 to 0.85 with dt = 0.025 Fast time integration at level 0 from 0.85 to 0.875 with dt = 0.025 Fast time integration at level 0 from 0.875 to 0.9 with dt = 0.025 Time integration of scalars at level 0 from 0.8 to 0.9 with dt = 0.1 using RHS created at 0.85 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 262144 cells Coarse STEP 9 ends. TIME = 0.9 DT = 0.1 Timestep time = 0.250703478 seconds. TIME= 0.9 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610471359 Anelastic dt at level 0 would be: 1.586895035 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 10] ADVANCE from elapsed time = 0.9 to 1 with dt = 0.1 Making slow rhs at time 0.9 for fast variables advancing from 0.9 to 0.9333333333333 Fast time integration at level 0 from 0.9 to 0.9333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 0.9 to 0.9333333333333 with dt = 0.03333333333333 using RHS created at 0.9 Making slow rhs at time 0.9333333333333 for fast variables advancing from 0.9 to 0.95 Fast time integration at level 0 from 0.9 to 0.925 with dt = 0.025 Fast time integration at level 0 from 0.925 to 0.95 with dt = 0.025 Time integration of scalars at level 0 from 0.9 to 0.95 with dt = 0.05 using RHS created at 0.9333333333333 Making slow rhs at time 0.95 for fast variables advancing from 0.9 to 1 Fast time integration at level 0 from 0.9 to 0.925 with dt = 0.025 Fast time integration at level 0 from 0.925 to 0.95 with dt = 0.025 Fast time integration at level 0 from 0.95 to 0.975 with dt = 0.025 Fast time integration at level 0 from 0.975 to 1 with dt = 0.025 Time integration of scalars at level 0 from 0.9 to 1 with dt = 0.1 using RHS created at 0.95 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 262144 cells Coarse STEP 10 ends. TIME = 1 DT = 0.1 Timestep time = 0.250805221 seconds. TIME= 1 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Writing native 3D plotfile ABL-Smag_plt00010 3DPlotfile write time = 0.023925646 seconds. Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610493893 Anelastic dt at level 0 would be: 1.586754151 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 11] ADVANCE from elapsed time = 1 to 1.1 with dt = 0.1 Making slow rhs at time 1 for fast variables advancing from 1 to 1.033333333333 Fast time integration at level 0 from 1 to 1.033333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1 to 1.033333333333 with dt = 0.03333333333333 using RHS created at 1 Making slow rhs at time 1.033333333333 for fast variables advancing from 1 to 1.05 Fast time integration at level 0 from 1 to 1.025 with dt = 0.025 Fast time integration at level 0 from 1.025 to 1.05 with dt = 0.025 Time integration of scalars at level 0 from 1 to 1.05 with dt = 0.05 using RHS created at 1.033333333333 Making slow rhs at time 1.05 for fast variables advancing from 1 to 1.1 Fast time integration at level 0 from 1 to 1.025 with dt = 0.025 Fast time integration at level 0 from 1.025 to 1.05 with dt = 0.025 Fast time integration at level 0 from 1.05 to 1.075 with dt = 0.025 Fast time integration at level 0 from 1.075 to 1.1 with dt = 0.025 Time integration of scalars at level 0 from 1 to 1.1 with dt = 0.1 using RHS created at 1.05 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 262144 cells Coarse STEP 11 ends. TIME = 1.1 DT = 0.1 Timestep time = 0.25075591 seconds. TIME= 1.1 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461049717 Anelastic dt at level 0 would be: 1.58662129 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 12] ADVANCE from elapsed time = 1.1 to 1.2 with dt = 0.1 Making slow rhs at time 1.1 for fast variables advancing from 1.1 to 1.133333333333 Fast time integration at level 0 from 1.1 to 1.133333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.1 to 1.133333333333 with dt = 0.03333333333333 using RHS created at 1.1 Making slow rhs at time 1.133333333333 for fast variables advancing from 1.1 to 1.15 Fast time integration at level 0 from 1.1 to 1.125 with dt = 0.025 Fast time integration at level 0 from 1.125 to 1.15 with dt = 0.025 Time integration of scalars at level 0 from 1.1 to 1.15 with dt = 0.05 using RHS created at 1.133333333333 Making slow rhs at time 1.15 for fast variables advancing from 1.1 to 1.2 Fast time integration at level 0 from 1.1 to 1.125 with dt = 0.025 Fast time integration at level 0 from 1.125 to 1.15 with dt = 0.025 Fast time integration at level 0 from 1.15 to 1.175 with dt = 0.025 Fast time integration at level 0 from 1.175 to 1.2 with dt = 0.025 Time integration of scalars at level 0 from 1.1 to 1.2 with dt = 0.1 using RHS created at 1.15 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 262144 cells Coarse STEP 12 ends. TIME = 1.2 DT = 0.1 Timestep time = 0.250775154 seconds. TIME= 1.2 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610540322 Anelastic dt at level 0 would be: 1.587338327 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 13] ADVANCE from elapsed time = 1.2 to 1.3 with dt = 0.1 Making slow rhs at time 1.2 for fast variables advancing from 1.2 to 1.233333333333 Fast time integration at level 0 from 1.2 to 1.233333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.2 to 1.233333333333 with dt = 0.03333333333333 using RHS created at 1.2 Making slow rhs at time 1.233333333333 for fast variables advancing from 1.2 to 1.25 Fast time integration at level 0 from 1.2 to 1.225 with dt = 0.025 Fast time integration at level 0 from 1.225 to 1.25 with dt = 0.025 Time integration of scalars at level 0 from 1.2 to 1.25 with dt = 0.05 using RHS created at 1.233333333333 Making slow rhs at time 1.25 for fast variables advancing from 1.2 to 1.3 Fast time integration at level 0 from 1.2 to 1.225 with dt = 0.025 Fast time integration at level 0 from 1.225 to 1.25 with dt = 0.025 Fast time integration at level 0 from 1.25 to 1.275 with dt = 0.025 Fast time integration at level 0 from 1.275 to 1.3 with dt = 0.025 Time integration of scalars at level 0 from 1.2 to 1.3 with dt = 0.1 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 262144 cells Coarse STEP 13 ends. TIME = 1.3 DT = 0.1 Timestep time = 0.250667201 seconds. TIME= 1.3 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610496973 Anelastic dt at level 0 would be: 1.586718176 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 14] ADVANCE from elapsed time = 1.3 to 1.4 with dt = 0.1 Making slow rhs at time 1.3 for fast variables advancing from 1.3 to 1.333333333333 Fast time integration at level 0 from 1.3 to 1.333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.3 to 1.333333333333 with dt = 0.03333333333333 using RHS created at 1.3 Making slow rhs at time 1.333333333333 for fast variables advancing from 1.3 to 1.35 Fast time integration at level 0 from 1.3 to 1.325 with dt = 0.025 Fast time integration at level 0 from 1.325 to 1.35 with dt = 0.025 Time integration of scalars at level 0 from 1.3 to 1.35 with dt = 0.05 using RHS created at 1.333333333333 Making slow rhs at time 1.35 for fast variables advancing from 1.3 to 1.4 Fast time integration at level 0 from 1.3 to 1.325 with dt = 0.025 Fast time integration at level 0 from 1.325 to 1.35 with dt = 0.025 Fast time integration at level 0 from 1.35 to 1.375 with dt = 0.025 Fast time integration at level 0 from 1.375 to 1.4 with dt = 0.025 Time integration of scalars at level 0 from 1.3 to 1.4 with dt = 0.1 using RHS created at 1.35 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 262144 cells Coarse STEP 14 ends. TIME = 1.4 DT = 0.1 Timestep time = 0.250695395 seconds. TIME= 1.4 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461048443 Anelastic dt at level 0 would be: 1.586515377 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 15] ADVANCE from elapsed time = 1.4 to 1.5 with dt = 0.1 Making slow rhs at time 1.4 for fast variables advancing from 1.4 to 1.433333333333 Fast time integration at level 0 from 1.4 to 1.433333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.4 to 1.433333333333 with dt = 0.03333333333333 using RHS created at 1.4 Making slow rhs at time 1.433333333333 for fast variables advancing from 1.4 to 1.45 Fast time integration at level 0 from 1.4 to 1.425 with dt = 0.025 Fast time integration at level 0 from 1.425 to 1.45 with dt = 0.025 Time integration of scalars at level 0 from 1.4 to 1.45 with dt = 0.05 using RHS created at 1.433333333333 Making slow rhs at time 1.45 for fast variables advancing from 1.4 to 1.5 Fast time integration at level 0 from 1.4 to 1.425 with dt = 0.025 Fast time integration at level 0 from 1.425 to 1.45 with dt = 0.025 Fast time integration at level 0 from 1.45 to 1.475 with dt = 0.025 Fast time integration at level 0 from 1.475 to 1.5 with dt = 0.025 Time integration of scalars at level 0 from 1.4 to 1.5 with dt = 0.1 using RHS created at 1.45 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 262144 cells Coarse STEP 15 ends. TIME = 1.5 DT = 0.1 Timestep time = 0.250660483 seconds. TIME= 1.5 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461049068 Anelastic dt at level 0 would be: 1.586637569 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 16] ADVANCE from elapsed time = 1.5 to 1.6 with dt = 0.1 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.533333333333 Fast time integration at level 0 from 1.5 to 1.533333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.5 to 1.533333333333 with dt = 0.03333333333333 using RHS created at 1.5 Making slow rhs at time 1.533333333333 for fast variables advancing from 1.5 to 1.55 Fast time integration at level 0 from 1.5 to 1.525 with dt = 0.025 Fast time integration at level 0 from 1.525 to 1.55 with dt = 0.025 Time integration of scalars at level 0 from 1.5 to 1.55 with dt = 0.05 using RHS created at 1.533333333333 Making slow rhs at time 1.55 for fast variables advancing from 1.5 to 1.6 Fast time integration at level 0 from 1.5 to 1.525 with dt = 0.025 Fast time integration at level 0 from 1.525 to 1.55 with dt = 0.025 Fast time integration at level 0 from 1.55 to 1.575 with dt = 0.025 Fast time integration at level 0 from 1.575 to 1.6 with dt = 0.025 Time integration of scalars at level 0 from 1.5 to 1.6 with dt = 0.1 using RHS created at 1.55 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 262144 cells Coarse STEP 16 ends. TIME = 1.6 DT = 0.1 Timestep time = 0.250644129 seconds. TIME= 1.6 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461051242 Anelastic dt at level 0 would be: 1.586986038 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 17] ADVANCE from elapsed time = 1.6 to 1.7 with dt = 0.1 Making slow rhs at time 1.6 for fast variables advancing from 1.6 to 1.633333333333 Fast time integration at level 0 from 1.6 to 1.633333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.6 to 1.633333333333 with dt = 0.03333333333333 using RHS created at 1.6 Making slow rhs at time 1.633333333333 for fast variables advancing from 1.6 to 1.65 Fast time integration at level 0 from 1.6 to 1.625 with dt = 0.025 Fast time integration at level 0 from 1.625 to 1.65 with dt = 0.025 Time integration of scalars at level 0 from 1.6 to 1.65 with dt = 0.05 using RHS created at 1.633333333333 Making slow rhs at time 1.65 for fast variables advancing from 1.6 to 1.7 Fast time integration at level 0 from 1.6 to 1.625 with dt = 0.025 Fast time integration at level 0 from 1.625 to 1.65 with dt = 0.025 Fast time integration at level 0 from 1.65 to 1.675 with dt = 0.025 Fast time integration at level 0 from 1.675 to 1.7 with dt = 0.025 Time integration of scalars at level 0 from 1.6 to 1.7 with dt = 0.1 using RHS created at 1.65 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 262144 cells Coarse STEP 17 ends. TIME = 1.7 DT = 0.1 Timestep time = 0.250593652 seconds. TIME= 1.7 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610513592 Anelastic dt at level 0 would be: 1.586948627 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 18] ADVANCE from elapsed time = 1.7 to 1.8 with dt = 0.1 Making slow rhs at time 1.7 for fast variables advancing from 1.7 to 1.733333333333 Fast time integration at level 0 from 1.7 to 1.733333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.7 to 1.733333333333 with dt = 0.03333333333333 using RHS created at 1.7 Making slow rhs at time 1.733333333333 for fast variables advancing from 1.7 to 1.75 Fast time integration at level 0 from 1.7 to 1.725 with dt = 0.025 Fast time integration at level 0 from 1.725 to 1.75 with dt = 0.025 Time integration of scalars at level 0 from 1.7 to 1.75 with dt = 0.05 using RHS created at 1.733333333333 Making slow rhs at time 1.75 for fast variables advancing from 1.7 to 1.8 Fast time integration at level 0 from 1.7 to 1.725 with dt = 0.025 Fast time integration at level 0 from 1.725 to 1.75 with dt = 0.025 Fast time integration at level 0 from 1.75 to 1.775 with dt = 0.025 Fast time integration at level 0 from 1.775 to 1.8 with dt = 0.025 Time integration of scalars at level 0 from 1.7 to 1.8 with dt = 0.1 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 262144 cells Coarse STEP 18 ends. TIME = 1.8 DT = 0.1 Timestep time = 0.250585575 seconds. TIME= 1.8 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610516911 Anelastic dt at level 0 would be: 1.58687795 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 19] ADVANCE from elapsed time = 1.8 to 1.9 with dt = 0.1 Making slow rhs at time 1.8 for fast variables advancing from 1.8 to 1.833333333333 Fast time integration at level 0 from 1.8 to 1.833333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.8 to 1.833333333333 with dt = 0.03333333333333 using RHS created at 1.8 Making slow rhs at time 1.833333333333 for fast variables advancing from 1.8 to 1.85 Fast time integration at level 0 from 1.8 to 1.825 with dt = 0.025 Fast time integration at level 0 from 1.825 to 1.85 with dt = 0.025 Time integration of scalars at level 0 from 1.8 to 1.85 with dt = 0.05 using RHS created at 1.833333333333 Making slow rhs at time 1.85 for fast variables advancing from 1.8 to 1.9 Fast time integration at level 0 from 1.8 to 1.825 with dt = 0.025 Fast time integration at level 0 from 1.825 to 1.85 with dt = 0.025 Fast time integration at level 0 from 1.85 to 1.875 with dt = 0.025 Fast time integration at level 0 from 1.875 to 1.9 with dt = 0.025 Time integration of scalars at level 0 from 1.8 to 1.9 with dt = 0.1 using RHS created at 1.85 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 262144 cells Coarse STEP 19 ends. TIME = 1.9 DT = 0.1 Timestep time = 0.250491053 seconds. TIME= 1.9 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610487896 Anelastic dt at level 0 would be: 1.586650117 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 20] ADVANCE from elapsed time = 1.9 to 2 with dt = 0.1 Making slow rhs at time 1.9 for fast variables advancing from 1.9 to 1.933333333333 Fast time integration at level 0 from 1.9 to 1.933333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 1.9 to 1.933333333333 with dt = 0.03333333333333 using RHS created at 1.9 Making slow rhs at time 1.933333333333 for fast variables advancing from 1.9 to 1.95 Fast time integration at level 0 from 1.9 to 1.925 with dt = 0.025 Fast time integration at level 0 from 1.925 to 1.95 with dt = 0.025 Time integration of scalars at level 0 from 1.9 to 1.95 with dt = 0.05 using RHS created at 1.933333333333 Making slow rhs at time 1.95 for fast variables advancing from 1.9 to 2 Fast time integration at level 0 from 1.9 to 1.925 with dt = 0.025 Fast time integration at level 0 from 1.925 to 1.95 with dt = 0.025 Fast time integration at level 0 from 1.95 to 1.975 with dt = 0.025 Fast time integration at level 0 from 1.975 to 2 with dt = 0.025 Time integration of scalars at level 0 from 1.9 to 2 with dt = 0.1 using RHS created at 1.95 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 262144 cells Coarse STEP 20 ends. TIME = 2 DT = 0.1 Timestep time = 0.250440543 seconds. TIME= 2 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Writing native 3D plotfile ABL-Smag_plt00020 3DPlotfile write time = 0.031194762 seconds. Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461047494 Anelastic dt at level 0 would be: 1.586516854 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 21] ADVANCE from elapsed time = 2 to 2.1 with dt = 0.1 Making slow rhs at time 2 for fast variables advancing from 2 to 2.033333333333 Fast time integration at level 0 from 2 to 2.033333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2 to 2.033333333333 with dt = 0.03333333333333 using RHS created at 2 Making slow rhs at time 2.033333333333 for fast variables advancing from 2 to 2.05 Fast time integration at level 0 from 2 to 2.025 with dt = 0.025 Fast time integration at level 0 from 2.025 to 2.05 with dt = 0.025 Time integration of scalars at level 0 from 2 to 2.05 with dt = 0.05 using RHS created at 2.033333333333 Making slow rhs at time 2.05 for fast variables advancing from 2 to 2.1 Fast time integration at level 0 from 2 to 2.025 with dt = 0.025 Fast time integration at level 0 from 2.025 to 2.05 with dt = 0.025 Fast time integration at level 0 from 2.05 to 2.075 with dt = 0.025 Fast time integration at level 0 from 2.075 to 2.1 with dt = 0.025 Time integration of scalars at level 0 from 2 to 2.1 with dt = 0.1 using RHS created at 2.05 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 262144 cells Coarse STEP 21 ends. TIME = 2.1 DT = 0.1 Timestep time = 0.250397083 seconds. TIME= 2.1 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610478779 Anelastic dt at level 0 would be: 1.586512764 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 22] ADVANCE from elapsed time = 2.1 to 2.2 with dt = 0.1 Making slow rhs at time 2.1 for fast variables advancing from 2.1 to 2.133333333333 Fast time integration at level 0 from 2.1 to 2.133333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.1 to 2.133333333333 with dt = 0.03333333333333 using RHS created at 2.1 Making slow rhs at time 2.133333333333 for fast variables advancing from 2.1 to 2.15 Fast time integration at level 0 from 2.1 to 2.125 with dt = 0.025 Fast time integration at level 0 from 2.125 to 2.15 with dt = 0.025 Time integration of scalars at level 0 from 2.1 to 2.15 with dt = 0.05 using RHS created at 2.133333333333 Making slow rhs at time 2.15 for fast variables advancing from 2.1 to 2.2 Fast time integration at level 0 from 2.1 to 2.125 with dt = 0.025 Fast time integration at level 0 from 2.125 to 2.15 with dt = 0.025 Fast time integration at level 0 from 2.15 to 2.175 with dt = 0.025 Fast time integration at level 0 from 2.175 to 2.2 with dt = 0.025 Time integration of scalars at level 0 from 2.1 to 2.2 with dt = 0.1 using RHS created at 2.15 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 262144 cells Coarse STEP 22 ends. TIME = 2.2 DT = 0.1 Timestep time = 0.250311911 seconds. TIME= 2.2 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461050333 Anelastic dt at level 0 would be: 1.586762265 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 23] ADVANCE from elapsed time = 2.2 to 2.3 with dt = 0.1 Making slow rhs at time 2.2 for fast variables advancing from 2.2 to 2.233333333333 Fast time integration at level 0 from 2.2 to 2.233333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.2 to 2.233333333333 with dt = 0.03333333333333 using RHS created at 2.2 Making slow rhs at time 2.233333333333 for fast variables advancing from 2.2 to 2.25 Fast time integration at level 0 from 2.2 to 2.225 with dt = 0.025 Fast time integration at level 0 from 2.225 to 2.25 with dt = 0.025 Time integration of scalars at level 0 from 2.2 to 2.25 with dt = 0.05 using RHS created at 2.233333333333 Making slow rhs at time 2.25 for fast variables advancing from 2.2 to 2.3 Fast time integration at level 0 from 2.2 to 2.225 with dt = 0.025 Fast time integration at level 0 from 2.225 to 2.25 with dt = 0.025 Fast time integration at level 0 from 2.25 to 2.275 with dt = 0.025 Fast time integration at level 0 from 2.275 to 2.3 with dt = 0.025 Time integration of scalars at level 0 from 2.2 to 2.3 with dt = 0.1 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 262144 cells Coarse STEP 23 ends. TIME = 2.3 DT = 0.1 Timestep time = 0.250373091 seconds. TIME= 2.3 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610473842 Anelastic dt at level 0 would be: 1.586506427 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 24] ADVANCE from elapsed time = 2.3 to 2.4 with dt = 0.1 Making slow rhs at time 2.3 for fast variables advancing from 2.3 to 2.333333333333 Fast time integration at level 0 from 2.3 to 2.333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.3 to 2.333333333333 with dt = 0.03333333333333 using RHS created at 2.3 Making slow rhs at time 2.333333333333 for fast variables advancing from 2.3 to 2.35 Fast time integration at level 0 from 2.3 to 2.325 with dt = 0.025 Fast time integration at level 0 from 2.325 to 2.35 with dt = 0.025 Time integration of scalars at level 0 from 2.3 to 2.35 with dt = 0.05 using RHS created at 2.333333333333 Making slow rhs at time 2.35 for fast variables advancing from 2.3 to 2.4 Fast time integration at level 0 from 2.3 to 2.325 with dt = 0.025 Fast time integration at level 0 from 2.325 to 2.35 with dt = 0.025 Fast time integration at level 0 from 2.35 to 2.375 with dt = 0.025 Fast time integration at level 0 from 2.375 to 2.4 with dt = 0.025 Time integration of scalars at level 0 from 2.3 to 2.4 with dt = 0.1 using RHS created at 2.35 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 262144 cells Coarse STEP 24 ends. TIME = 2.4 DT = 0.1 Timestep time = 0.250398295 seconds. TIME= 2.4 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610484762 Anelastic dt at level 0 would be: 1.586585714 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 25] ADVANCE from elapsed time = 2.4 to 2.5 with dt = 0.1 Making slow rhs at time 2.4 for fast variables advancing from 2.4 to 2.433333333333 Fast time integration at level 0 from 2.4 to 2.433333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.4 to 2.433333333333 with dt = 0.03333333333333 using RHS created at 2.4 Making slow rhs at time 2.433333333333 for fast variables advancing from 2.4 to 2.45 Fast time integration at level 0 from 2.4 to 2.425 with dt = 0.025 Fast time integration at level 0 from 2.425 to 2.45 with dt = 0.025 Time integration of scalars at level 0 from 2.4 to 2.45 with dt = 0.05 using RHS created at 2.433333333333 Making slow rhs at time 2.45 for fast variables advancing from 2.4 to 2.5 Fast time integration at level 0 from 2.4 to 2.425 with dt = 0.025 Fast time integration at level 0 from 2.425 to 2.45 with dt = 0.025 Fast time integration at level 0 from 2.45 to 2.475 with dt = 0.025 Fast time integration at level 0 from 2.475 to 2.5 with dt = 0.025 Time integration of scalars at level 0 from 2.4 to 2.5 with dt = 0.1 using RHS created at 2.45 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 262144 cells Coarse STEP 25 ends. TIME = 2.5 DT = 0.1 Timestep time = 0.250395879 seconds. TIME= 2.5 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610503582 Anelastic dt at level 0 would be: 1.586746958 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 26] ADVANCE from elapsed time = 2.5 to 2.6 with dt = 0.1 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.533333333333 Fast time integration at level 0 from 2.5 to 2.533333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.5 to 2.533333333333 with dt = 0.03333333333333 using RHS created at 2.5 Making slow rhs at time 2.533333333333 for fast variables advancing from 2.5 to 2.55 Fast time integration at level 0 from 2.5 to 2.525 with dt = 0.025 Fast time integration at level 0 from 2.525 to 2.55 with dt = 0.025 Time integration of scalars at level 0 from 2.5 to 2.55 with dt = 0.05 using RHS created at 2.533333333333 Making slow rhs at time 2.55 for fast variables advancing from 2.5 to 2.6 Fast time integration at level 0 from 2.5 to 2.525 with dt = 0.025 Fast time integration at level 0 from 2.525 to 2.55 with dt = 0.025 Fast time integration at level 0 from 2.55 to 2.575 with dt = 0.025 Fast time integration at level 0 from 2.575 to 2.6 with dt = 0.025 Time integration of scalars at level 0 from 2.5 to 2.6 with dt = 0.1 using RHS created at 2.55 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 262144 cells Coarse STEP 26 ends. TIME = 2.6 DT = 0.1 Timestep time = 0.250423569 seconds. TIME= 2.6 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610510487 Anelastic dt at level 0 would be: 1.586925886 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 27] ADVANCE from elapsed time = 2.6 to 2.7 with dt = 0.1 Making slow rhs at time 2.6 for fast variables advancing from 2.6 to 2.633333333333 Fast time integration at level 0 from 2.6 to 2.633333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.6 to 2.633333333333 with dt = 0.03333333333333 using RHS created at 2.6 Making slow rhs at time 2.633333333333 for fast variables advancing from 2.6 to 2.65 Fast time integration at level 0 from 2.6 to 2.625 with dt = 0.025 Fast time integration at level 0 from 2.625 to 2.65 with dt = 0.025 Time integration of scalars at level 0 from 2.6 to 2.65 with dt = 0.05 using RHS created at 2.633333333333 Making slow rhs at time 2.65 for fast variables advancing from 2.6 to 2.7 Fast time integration at level 0 from 2.6 to 2.625 with dt = 0.025 Fast time integration at level 0 from 2.625 to 2.65 with dt = 0.025 Fast time integration at level 0 from 2.65 to 2.675 with dt = 0.025 Fast time integration at level 0 from 2.675 to 2.7 with dt = 0.025 Time integration of scalars at level 0 from 2.6 to 2.7 with dt = 0.1 using RHS created at 2.65 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 262144 cells Coarse STEP 27 ends. TIME = 2.7 DT = 0.1 Timestep time = 0.250427261 seconds. TIME= 2.7 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610511845 Anelastic dt at level 0 would be: 1.586960971 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 28] ADVANCE from elapsed time = 2.7 to 2.8 with dt = 0.1 Making slow rhs at time 2.7 for fast variables advancing from 2.7 to 2.733333333333 Fast time integration at level 0 from 2.7 to 2.733333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.7 to 2.733333333333 with dt = 0.03333333333333 using RHS created at 2.7 Making slow rhs at time 2.733333333333 for fast variables advancing from 2.7 to 2.75 Fast time integration at level 0 from 2.7 to 2.725 with dt = 0.025 Fast time integration at level 0 from 2.725 to 2.75 with dt = 0.025 Time integration of scalars at level 0 from 2.7 to 2.75 with dt = 0.05 using RHS created at 2.733333333333 Making slow rhs at time 2.75 for fast variables advancing from 2.7 to 2.8 Fast time integration at level 0 from 2.7 to 2.725 with dt = 0.025 Fast time integration at level 0 from 2.725 to 2.75 with dt = 0.025 Fast time integration at level 0 from 2.75 to 2.775 with dt = 0.025 Fast time integration at level 0 from 2.775 to 2.8 with dt = 0.025 Time integration of scalars at level 0 from 2.7 to 2.8 with dt = 0.1 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 262144 cells Coarse STEP 28 ends. TIME = 2.8 DT = 0.1 Timestep time = 0.25046252 seconds. TIME= 2.8 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0461050416 Anelastic dt at level 0 would be: 1.586861247 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 29] ADVANCE from elapsed time = 2.8 to 2.9 with dt = 0.1 Making slow rhs at time 2.8 for fast variables advancing from 2.8 to 2.833333333333 Fast time integration at level 0 from 2.8 to 2.833333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.8 to 2.833333333333 with dt = 0.03333333333333 using RHS created at 2.8 Making slow rhs at time 2.833333333333 for fast variables advancing from 2.8 to 2.85 Fast time integration at level 0 from 2.8 to 2.825 with dt = 0.025 Fast time integration at level 0 from 2.825 to 2.85 with dt = 0.025 Time integration of scalars at level 0 from 2.8 to 2.85 with dt = 0.05 using RHS created at 2.833333333333 Making slow rhs at time 2.85 for fast variables advancing from 2.8 to 2.9 Fast time integration at level 0 from 2.8 to 2.825 with dt = 0.025 Fast time integration at level 0 from 2.825 to 2.85 with dt = 0.025 Fast time integration at level 0 from 2.85 to 2.875 with dt = 0.025 Fast time integration at level 0 from 2.875 to 2.9 with dt = 0.025 Time integration of scalars at level 0 from 2.8 to 2.9 with dt = 0.1 using RHS created at 2.85 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 262144 cells Coarse STEP 29 ends. TIME = 2.9 DT = 0.1 Timestep time = 0.250440331 seconds. TIME= 2.9 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610533691 Anelastic dt at level 0 would be: 1.587145747 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 30] ADVANCE from elapsed time = 2.9 to 3 with dt = 0.1 Making slow rhs at time 2.9 for fast variables advancing from 2.9 to 2.933333333333 Fast time integration at level 0 from 2.9 to 2.933333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 2.9 to 2.933333333333 with dt = 0.03333333333333 using RHS created at 2.9 Making slow rhs at time 2.933333333333 for fast variables advancing from 2.9 to 2.95 Fast time integration at level 0 from 2.9 to 2.925 with dt = 0.025 Fast time integration at level 0 from 2.925 to 2.95 with dt = 0.025 Time integration of scalars at level 0 from 2.9 to 2.95 with dt = 0.05 using RHS created at 2.933333333333 Making slow rhs at time 2.95 for fast variables advancing from 2.9 to 3 Fast time integration at level 0 from 2.9 to 2.925 with dt = 0.025 Fast time integration at level 0 from 2.925 to 2.95 with dt = 0.025 Fast time integration at level 0 from 2.95 to 2.975 with dt = 0.025 Fast time integration at level 0 from 2.975 to 3 with dt = 0.025 Time integration of scalars at level 0 from 2.9 to 3 with dt = 0.1 using RHS created at 2.95 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 262144 cells Coarse STEP 30 ends. TIME = 3 DT = 0.1 Timestep time = 0.25055481 seconds. TIME= 3 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Writing native 3D plotfile ABL-Smag_plt00030 3DPlotfile write time = 0.086081634 seconds. Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610540687 Anelastic dt at level 0 would be: 1.587228397 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 31] ADVANCE from elapsed time = 3 to 3.1 with dt = 0.1 Making slow rhs at time 3 for fast variables advancing from 3 to 3.033333333333 Fast time integration at level 0 from 3 to 3.033333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3 to 3.033333333333 with dt = 0.03333333333333 using RHS created at 3 Making slow rhs at time 3.033333333333 for fast variables advancing from 3 to 3.05 Fast time integration at level 0 from 3 to 3.025 with dt = 0.025 Fast time integration at level 0 from 3.025 to 3.05 with dt = 0.025 Time integration of scalars at level 0 from 3 to 3.05 with dt = 0.05 using RHS created at 3.033333333333 Making slow rhs at time 3.05 for fast variables advancing from 3 to 3.1 Fast time integration at level 0 from 3 to 3.025 with dt = 0.025 Fast time integration at level 0 from 3.025 to 3.05 with dt = 0.025 Fast time integration at level 0 from 3.05 to 3.075 with dt = 0.025 Fast time integration at level 0 from 3.075 to 3.1 with dt = 0.025 Time integration of scalars at level 0 from 3 to 3.1 with dt = 0.1 using RHS created at 3.05 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 262144 cells Coarse STEP 31 ends. TIME = 3.1 DT = 0.1 Timestep time = 0.250929243 seconds. TIME= 3.1 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610534279 Anelastic dt at level 0 would be: 1.587175883 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 32] ADVANCE from elapsed time = 3.1 to 3.2 with dt = 0.1 Making slow rhs at time 3.1 for fast variables advancing from 3.1 to 3.133333333333 Fast time integration at level 0 from 3.1 to 3.133333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.1 to 3.133333333333 with dt = 0.03333333333333 using RHS created at 3.1 Making slow rhs at time 3.133333333333 for fast variables advancing from 3.1 to 3.15 Fast time integration at level 0 from 3.1 to 3.125 with dt = 0.025 Fast time integration at level 0 from 3.125 to 3.15 with dt = 0.025 Time integration of scalars at level 0 from 3.1 to 3.15 with dt = 0.05 using RHS created at 3.133333333333 Making slow rhs at time 3.15 for fast variables advancing from 3.1 to 3.2 Fast time integration at level 0 from 3.1 to 3.125 with dt = 0.025 Fast time integration at level 0 from 3.125 to 3.15 with dt = 0.025 Fast time integration at level 0 from 3.15 to 3.175 with dt = 0.025 Fast time integration at level 0 from 3.175 to 3.2 with dt = 0.025 Time integration of scalars at level 0 from 3.1 to 3.2 with dt = 0.1 using RHS created at 3.15 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 262144 cells Coarse STEP 32 ends. TIME = 3.2 DT = 0.1 Timestep time = 0.250408621 seconds. TIME= 3.2 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610538943 Anelastic dt at level 0 would be: 1.587194247 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 33] ADVANCE from elapsed time = 3.2 to 3.3 with dt = 0.1 Making slow rhs at time 3.2 for fast variables advancing from 3.2 to 3.233333333333 Fast time integration at level 0 from 3.2 to 3.233333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.2 to 3.233333333333 with dt = 0.03333333333333 using RHS created at 3.2 Making slow rhs at time 3.233333333333 for fast variables advancing from 3.2 to 3.25 Fast time integration at level 0 from 3.2 to 3.225 with dt = 0.025 Fast time integration at level 0 from 3.225 to 3.25 with dt = 0.025 Time integration of scalars at level 0 from 3.2 to 3.25 with dt = 0.05 using RHS created at 3.233333333333 Making slow rhs at time 3.25 for fast variables advancing from 3.2 to 3.3 Fast time integration at level 0 from 3.2 to 3.225 with dt = 0.025 Fast time integration at level 0 from 3.225 to 3.25 with dt = 0.025 Fast time integration at level 0 from 3.25 to 3.275 with dt = 0.025 Fast time integration at level 0 from 3.275 to 3.3 with dt = 0.025 Time integration of scalars at level 0 from 3.2 to 3.3 with dt = 0.1 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 262144 cells Coarse STEP 33 ends. TIME = 3.3 DT = 0.1 Timestep time = 0.250417457 seconds. TIME= 3.3 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610555108 Anelastic dt at level 0 would be: 1.587460703 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 34] ADVANCE from elapsed time = 3.3 to 3.4 with dt = 0.1 Making slow rhs at time 3.3 for fast variables advancing from 3.3 to 3.333333333333 Fast time integration at level 0 from 3.3 to 3.333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.3 to 3.333333333333 with dt = 0.03333333333333 using RHS created at 3.3 Making slow rhs at time 3.333333333333 for fast variables advancing from 3.3 to 3.35 Fast time integration at level 0 from 3.3 to 3.325 with dt = 0.025 Fast time integration at level 0 from 3.325 to 3.35 with dt = 0.025 Time integration of scalars at level 0 from 3.3 to 3.35 with dt = 0.05 using RHS created at 3.333333333333 Making slow rhs at time 3.35 for fast variables advancing from 3.3 to 3.4 Fast time integration at level 0 from 3.3 to 3.325 with dt = 0.025 Fast time integration at level 0 from 3.325 to 3.35 with dt = 0.025 Fast time integration at level 0 from 3.35 to 3.375 with dt = 0.025 Fast time integration at level 0 from 3.375 to 3.4 with dt = 0.025 Time integration of scalars at level 0 from 3.3 to 3.4 with dt = 0.1 using RHS created at 3.35 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 262144 cells Coarse STEP 34 ends. TIME = 3.4 DT = 0.1 Timestep time = 0.250385772 seconds. TIME= 3.4 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610552083 Anelastic dt at level 0 would be: 1.587437212 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 35] ADVANCE from elapsed time = 3.4 to 3.5 with dt = 0.1 Making slow rhs at time 3.4 for fast variables advancing from 3.4 to 3.433333333333 Fast time integration at level 0 from 3.4 to 3.433333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.4 to 3.433333333333 with dt = 0.03333333333333 using RHS created at 3.4 Making slow rhs at time 3.433333333333 for fast variables advancing from 3.4 to 3.45 Fast time integration at level 0 from 3.4 to 3.425 with dt = 0.025 Fast time integration at level 0 from 3.425 to 3.45 with dt = 0.025 Time integration of scalars at level 0 from 3.4 to 3.45 with dt = 0.05 using RHS created at 3.433333333333 Making slow rhs at time 3.45 for fast variables advancing from 3.4 to 3.5 Fast time integration at level 0 from 3.4 to 3.425 with dt = 0.025 Fast time integration at level 0 from 3.425 to 3.45 with dt = 0.025 Fast time integration at level 0 from 3.45 to 3.475 with dt = 0.025 Fast time integration at level 0 from 3.475 to 3.5 with dt = 0.025 Time integration of scalars at level 0 from 3.4 to 3.5 with dt = 0.1 using RHS created at 3.45 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 262144 cells Coarse STEP 35 ends. TIME = 3.5 DT = 0.1 Timestep time = 0.250465114 seconds. TIME= 3.5 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610545201 Anelastic dt at level 0 would be: 1.587307367 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 36] ADVANCE from elapsed time = 3.5 to 3.6 with dt = 0.1 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.533333333333 Fast time integration at level 0 from 3.5 to 3.533333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.5 to 3.533333333333 with dt = 0.03333333333333 using RHS created at 3.5 Making slow rhs at time 3.533333333333 for fast variables advancing from 3.5 to 3.55 Fast time integration at level 0 from 3.5 to 3.525 with dt = 0.025 Fast time integration at level 0 from 3.525 to 3.55 with dt = 0.025 Time integration of scalars at level 0 from 3.5 to 3.55 with dt = 0.05 using RHS created at 3.533333333333 Making slow rhs at time 3.55 for fast variables advancing from 3.5 to 3.6 Fast time integration at level 0 from 3.5 to 3.525 with dt = 0.025 Fast time integration at level 0 from 3.525 to 3.55 with dt = 0.025 Fast time integration at level 0 from 3.55 to 3.575 with dt = 0.025 Fast time integration at level 0 from 3.575 to 3.6 with dt = 0.025 Time integration of scalars at level 0 from 3.5 to 3.6 with dt = 0.1 using RHS created at 3.55 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 262144 cells Coarse STEP 36 ends. TIME = 3.6 DT = 0.1 Timestep time = 0.250425201 seconds. TIME= 3.6 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610546254 Anelastic dt at level 0 would be: 1.587311861 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 37] ADVANCE from elapsed time = 3.6 to 3.7 with dt = 0.1 Making slow rhs at time 3.6 for fast variables advancing from 3.6 to 3.633333333333 Fast time integration at level 0 from 3.6 to 3.633333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.6 to 3.633333333333 with dt = 0.03333333333333 using RHS created at 3.6 Making slow rhs at time 3.633333333333 for fast variables advancing from 3.6 to 3.65 Fast time integration at level 0 from 3.6 to 3.625 with dt = 0.025 Fast time integration at level 0 from 3.625 to 3.65 with dt = 0.025 Time integration of scalars at level 0 from 3.6 to 3.65 with dt = 0.05 using RHS created at 3.633333333333 Making slow rhs at time 3.65 for fast variables advancing from 3.6 to 3.7 Fast time integration at level 0 from 3.6 to 3.625 with dt = 0.025 Fast time integration at level 0 from 3.625 to 3.65 with dt = 0.025 Fast time integration at level 0 from 3.65 to 3.675 with dt = 0.025 Fast time integration at level 0 from 3.675 to 3.7 with dt = 0.025 Time integration of scalars at level 0 from 3.6 to 3.7 with dt = 0.1 using RHS created at 3.65 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 262144 cells Coarse STEP 37 ends. TIME = 3.7 DT = 0.1 Timestep time = 0.250313991 seconds. TIME= 3.7 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610547962 Anelastic dt at level 0 would be: 1.587308844 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 38] ADVANCE from elapsed time = 3.7 to 3.8 with dt = 0.1 Making slow rhs at time 3.7 for fast variables advancing from 3.7 to 3.733333333333 Fast time integration at level 0 from 3.7 to 3.733333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.7 to 3.733333333333 with dt = 0.03333333333333 using RHS created at 3.7 Making slow rhs at time 3.733333333333 for fast variables advancing from 3.7 to 3.75 Fast time integration at level 0 from 3.7 to 3.725 with dt = 0.025 Fast time integration at level 0 from 3.725 to 3.75 with dt = 0.025 Time integration of scalars at level 0 from 3.7 to 3.75 with dt = 0.05 using RHS created at 3.733333333333 Making slow rhs at time 3.75 for fast variables advancing from 3.7 to 3.8 Fast time integration at level 0 from 3.7 to 3.725 with dt = 0.025 Fast time integration at level 0 from 3.725 to 3.75 with dt = 0.025 Fast time integration at level 0 from 3.75 to 3.775 with dt = 0.025 Fast time integration at level 0 from 3.775 to 3.8 with dt = 0.025 Time integration of scalars at level 0 from 3.7 to 3.8 with dt = 0.1 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 262144 cells Coarse STEP 38 ends. TIME = 3.8 DT = 0.1 Timestep time = 0.250503079 seconds. TIME= 3.8 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610554991 Anelastic dt at level 0 would be: 1.587465589 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 39] ADVANCE from elapsed time = 3.8 to 3.9 with dt = 0.1 Making slow rhs at time 3.8 for fast variables advancing from 3.8 to 3.833333333333 Fast time integration at level 0 from 3.8 to 3.833333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.8 to 3.833333333333 with dt = 0.03333333333333 using RHS created at 3.8 Making slow rhs at time 3.833333333333 for fast variables advancing from 3.8 to 3.85 Fast time integration at level 0 from 3.8 to 3.825 with dt = 0.025 Fast time integration at level 0 from 3.825 to 3.85 with dt = 0.025 Time integration of scalars at level 0 from 3.8 to 3.85 with dt = 0.05 using RHS created at 3.833333333333 Making slow rhs at time 3.85 for fast variables advancing from 3.8 to 3.9 Fast time integration at level 0 from 3.8 to 3.825 with dt = 0.025 Fast time integration at level 0 from 3.825 to 3.85 with dt = 0.025 Fast time integration at level 0 from 3.85 to 3.875 with dt = 0.025 Fast time integration at level 0 from 3.875 to 3.9 with dt = 0.025 Time integration of scalars at level 0 from 3.8 to 3.9 with dt = 0.1 using RHS created at 3.85 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 262144 cells Coarse STEP 39 ends. TIME = 3.9 DT = 0.1 Timestep time = 0.250412161 seconds. TIME= 3.9 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610545237 Anelastic dt at level 0 would be: 1.587311546 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 40] ADVANCE from elapsed time = 3.9 to 4 with dt = 0.1 Making slow rhs at time 3.9 for fast variables advancing from 3.9 to 3.933333333333 Fast time integration at level 0 from 3.9 to 3.933333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 3.9 to 3.933333333333 with dt = 0.03333333333333 using RHS created at 3.9 Making slow rhs at time 3.933333333333 for fast variables advancing from 3.9 to 3.95 Fast time integration at level 0 from 3.9 to 3.925 with dt = 0.025 Fast time integration at level 0 from 3.925 to 3.95 with dt = 0.025 Time integration of scalars at level 0 from 3.9 to 3.95 with dt = 0.05 using RHS created at 3.933333333333 Making slow rhs at time 3.95 for fast variables advancing from 3.9 to 4 Fast time integration at level 0 from 3.9 to 3.925 with dt = 0.025 Fast time integration at level 0 from 3.925 to 3.95 with dt = 0.025 Fast time integration at level 0 from 3.95 to 3.975 with dt = 0.025 Fast time integration at level 0 from 3.975 to 4 with dt = 0.025 Time integration of scalars at level 0 from 3.9 to 4 with dt = 0.1 using RHS created at 3.95 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 262144 cells Coarse STEP 40 ends. TIME = 4 DT = 0.1 Timestep time = 0.250417395 seconds. TIME= 4 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Writing native 3D plotfile ABL-Smag_plt00040 3DPlotfile write time = 0.025021147 seconds. Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610532123 Anelastic dt at level 0 would be: 1.587162722 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 41] ADVANCE from elapsed time = 4 to 4.1 with dt = 0.1 Making slow rhs at time 4 for fast variables advancing from 4 to 4.033333333333 Fast time integration at level 0 from 4 to 4.033333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4 to 4.033333333333 with dt = 0.03333333333333 using RHS created at 4 Making slow rhs at time 4.033333333333 for fast variables advancing from 4 to 4.05 Fast time integration at level 0 from 4 to 4.025 with dt = 0.025 Fast time integration at level 0 from 4.025 to 4.05 with dt = 0.025 Time integration of scalars at level 0 from 4 to 4.05 with dt = 0.05 using RHS created at 4.033333333333 Making slow rhs at time 4.05 for fast variables advancing from 4 to 4.1 Fast time integration at level 0 from 4 to 4.025 with dt = 0.025 Fast time integration at level 0 from 4.025 to 4.05 with dt = 0.025 Fast time integration at level 0 from 4.05 to 4.075 with dt = 0.025 Fast time integration at level 0 from 4.075 to 4.1 with dt = 0.025 Time integration of scalars at level 0 from 4 to 4.1 with dt = 0.1 using RHS created at 4.05 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 262144 cells Coarse STEP 41 ends. TIME = 4.1 DT = 0.1 Timestep time = 0.250423518 seconds. TIME= 4.1 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610538683 Anelastic dt at level 0 would be: 1.587238649 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 42] ADVANCE from elapsed time = 4.1 to 4.2 with dt = 0.1 Making slow rhs at time 4.1 for fast variables advancing from 4.1 to 4.133333333333 Fast time integration at level 0 from 4.1 to 4.133333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.1 to 4.133333333333 with dt = 0.03333333333333 using RHS created at 4.1 Making slow rhs at time 4.133333333333 for fast variables advancing from 4.1 to 4.15 Fast time integration at level 0 from 4.1 to 4.125 with dt = 0.025 Fast time integration at level 0 from 4.125 to 4.15 with dt = 0.025 Time integration of scalars at level 0 from 4.1 to 4.15 with dt = 0.05 using RHS created at 4.133333333333 Making slow rhs at time 4.15 for fast variables advancing from 4.1 to 4.2 Fast time integration at level 0 from 4.1 to 4.125 with dt = 0.025 Fast time integration at level 0 from 4.125 to 4.15 with dt = 0.025 Fast time integration at level 0 from 4.15 to 4.175 with dt = 0.025 Fast time integration at level 0 from 4.175 to 4.2 with dt = 0.025 Time integration of scalars at level 0 from 4.1 to 4.2 with dt = 0.1 using RHS created at 4.15 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 262144 cells Coarse STEP 42 ends. TIME = 4.2 DT = 0.1 Timestep time = 0.250416592 seconds. TIME= 4.2 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610537436 Anelastic dt at level 0 would be: 1.587217472 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 43] ADVANCE from elapsed time = 4.2 to 4.3 with dt = 0.1 Making slow rhs at time 4.2 for fast variables advancing from 4.2 to 4.233333333333 Fast time integration at level 0 from 4.2 to 4.233333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.2 to 4.233333333333 with dt = 0.03333333333333 using RHS created at 4.2 Making slow rhs at time 4.233333333333 for fast variables advancing from 4.2 to 4.25 Fast time integration at level 0 from 4.2 to 4.225 with dt = 0.025 Fast time integration at level 0 from 4.225 to 4.25 with dt = 0.025 Time integration of scalars at level 0 from 4.2 to 4.25 with dt = 0.05 using RHS created at 4.233333333333 Making slow rhs at time 4.25 for fast variables advancing from 4.2 to 4.3 Fast time integration at level 0 from 4.2 to 4.225 with dt = 0.025 Fast time integration at level 0 from 4.225 to 4.25 with dt = 0.025 Fast time integration at level 0 from 4.25 to 4.275 with dt = 0.025 Fast time integration at level 0 from 4.275 to 4.3 with dt = 0.025 Time integration of scalars at level 0 from 4.2 to 4.3 with dt = 0.1 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 262144 cells Coarse STEP 43 ends. TIME = 4.3 DT = 0.1 Timestep time = 0.250421616 seconds. TIME= 4.3 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610521444 Anelastic dt at level 0 would be: 1.58706136 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 44] ADVANCE from elapsed time = 4.3 to 4.4 with dt = 0.1 Making slow rhs at time 4.3 for fast variables advancing from 4.3 to 4.333333333333 Fast time integration at level 0 from 4.3 to 4.333333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.3 to 4.333333333333 with dt = 0.03333333333333 using RHS created at 4.3 Making slow rhs at time 4.333333333333 for fast variables advancing from 4.3 to 4.35 Fast time integration at level 0 from 4.3 to 4.325 with dt = 0.025 Fast time integration at level 0 from 4.325 to 4.35 with dt = 0.025 Time integration of scalars at level 0 from 4.3 to 4.35 with dt = 0.05 using RHS created at 4.333333333333 Making slow rhs at time 4.35 for fast variables advancing from 4.3 to 4.4 Fast time integration at level 0 from 4.3 to 4.325 with dt = 0.025 Fast time integration at level 0 from 4.325 to 4.35 with dt = 0.025 Fast time integration at level 0 from 4.35 to 4.375 with dt = 0.025 Fast time integration at level 0 from 4.375 to 4.4 with dt = 0.025 Time integration of scalars at level 0 from 4.3 to 4.4 with dt = 0.1 using RHS created at 4.35 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 262144 cells Coarse STEP 44 ends. TIME = 4.4 DT = 0.1 Timestep time = 0.250431825 seconds. TIME= 4.4 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610530393 Anelastic dt at level 0 would be: 1.587118242 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 45] ADVANCE from elapsed time = 4.4 to 4.5 with dt = 0.1 Making slow rhs at time 4.4 for fast variables advancing from 4.4 to 4.433333333333 Fast time integration at level 0 from 4.4 to 4.433333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.4 to 4.433333333333 with dt = 0.03333333333333 using RHS created at 4.4 Making slow rhs at time 4.433333333333 for fast variables advancing from 4.4 to 4.45 Fast time integration at level 0 from 4.4 to 4.425 with dt = 0.025 Fast time integration at level 0 from 4.425 to 4.45 with dt = 0.025 Time integration of scalars at level 0 from 4.4 to 4.45 with dt = 0.05 using RHS created at 4.433333333333 Making slow rhs at time 4.45 for fast variables advancing from 4.4 to 4.5 Fast time integration at level 0 from 4.4 to 4.425 with dt = 0.025 Fast time integration at level 0 from 4.425 to 4.45 with dt = 0.025 Fast time integration at level 0 from 4.45 to 4.475 with dt = 0.025 Fast time integration at level 0 from 4.475 to 4.5 with dt = 0.025 Time integration of scalars at level 0 from 4.4 to 4.5 with dt = 0.1 using RHS created at 4.45 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 262144 cells Coarse STEP 45 ends. TIME = 4.5 DT = 0.1 Timestep time = 0.250493468 seconds. TIME= 4.5 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610530627 Anelastic dt at level 0 would be: 1.587097038 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 46] ADVANCE from elapsed time = 4.5 to 4.6 with dt = 0.1 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.533333333333 Fast time integration at level 0 from 4.5 to 4.533333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.5 to 4.533333333333 with dt = 0.03333333333333 using RHS created at 4.5 Making slow rhs at time 4.533333333333 for fast variables advancing from 4.5 to 4.55 Fast time integration at level 0 from 4.5 to 4.525 with dt = 0.025 Fast time integration at level 0 from 4.525 to 4.55 with dt = 0.025 Time integration of scalars at level 0 from 4.5 to 4.55 with dt = 0.05 using RHS created at 4.533333333333 Making slow rhs at time 4.55 for fast variables advancing from 4.5 to 4.6 Fast time integration at level 0 from 4.5 to 4.525 with dt = 0.025 Fast time integration at level 0 from 4.525 to 4.55 with dt = 0.025 Fast time integration at level 0 from 4.55 to 4.575 with dt = 0.025 Fast time integration at level 0 from 4.575 to 4.6 with dt = 0.025 Time integration of scalars at level 0 from 4.5 to 4.6 with dt = 0.1 using RHS created at 4.55 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 262144 cells Coarse STEP 46 ends. TIME = 4.6 DT = 0.1 Timestep time = 0.250402506 seconds. TIME= 4.6 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610536829 Anelastic dt at level 0 would be: 1.587237264 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 47] ADVANCE from elapsed time = 4.6 to 4.7 with dt = 0.1 Making slow rhs at time 4.6 for fast variables advancing from 4.6 to 4.633333333333 Fast time integration at level 0 from 4.6 to 4.633333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.6 to 4.633333333333 with dt = 0.03333333333333 using RHS created at 4.6 Making slow rhs at time 4.633333333333 for fast variables advancing from 4.6 to 4.65 Fast time integration at level 0 from 4.6 to 4.625 with dt = 0.025 Fast time integration at level 0 from 4.625 to 4.65 with dt = 0.025 Time integration of scalars at level 0 from 4.6 to 4.65 with dt = 0.05 using RHS created at 4.633333333333 Making slow rhs at time 4.65 for fast variables advancing from 4.6 to 4.7 Fast time integration at level 0 from 4.6 to 4.625 with dt = 0.025 Fast time integration at level 0 from 4.625 to 4.65 with dt = 0.025 Fast time integration at level 0 from 4.65 to 4.675 with dt = 0.025 Fast time integration at level 0 from 4.675 to 4.7 with dt = 0.025 Time integration of scalars at level 0 from 4.6 to 4.7 with dt = 0.1 using RHS created at 4.65 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 262144 cells Coarse STEP 47 ends. TIME = 4.7 DT = 0.1 Timestep time = 0.250397384 seconds. TIME= 4.7 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610556742 Anelastic dt at level 0 would be: 1.587466217 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 48] ADVANCE from elapsed time = 4.7 to 4.8 with dt = 0.1 Making slow rhs at time 4.7 for fast variables advancing from 4.7 to 4.733333333333 Fast time integration at level 0 from 4.7 to 4.733333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.7 to 4.733333333333 with dt = 0.03333333333333 using RHS created at 4.7 Making slow rhs at time 4.733333333333 for fast variables advancing from 4.7 to 4.75 Fast time integration at level 0 from 4.7 to 4.725 with dt = 0.025 Fast time integration at level 0 from 4.725 to 4.75 with dt = 0.025 Time integration of scalars at level 0 from 4.7 to 4.75 with dt = 0.05 using RHS created at 4.733333333333 Making slow rhs at time 4.75 for fast variables advancing from 4.7 to 4.8 Fast time integration at level 0 from 4.7 to 4.725 with dt = 0.025 Fast time integration at level 0 from 4.725 to 4.75 with dt = 0.025 Fast time integration at level 0 from 4.75 to 4.775 with dt = 0.025 Fast time integration at level 0 from 4.775 to 4.8 with dt = 0.025 Time integration of scalars at level 0 from 4.7 to 4.8 with dt = 0.1 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 262144 cells Coarse STEP 48 ends. TIME = 4.8 DT = 0.1 Timestep time = 0.250440561 seconds. TIME= 4.8 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610570529 Anelastic dt at level 0 would be: 1.587582241 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 49] ADVANCE from elapsed time = 4.8 to 4.9 with dt = 0.1 Making slow rhs at time 4.8 for fast variables advancing from 4.8 to 4.833333333333 Fast time integration at level 0 from 4.8 to 4.833333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.8 to 4.833333333333 with dt = 0.03333333333333 using RHS created at 4.8 Making slow rhs at time 4.833333333333 for fast variables advancing from 4.8 to 4.85 Fast time integration at level 0 from 4.8 to 4.825 with dt = 0.025 Fast time integration at level 0 from 4.825 to 4.85 with dt = 0.025 Time integration of scalars at level 0 from 4.8 to 4.85 with dt = 0.05 using RHS created at 4.833333333333 Making slow rhs at time 4.85 for fast variables advancing from 4.8 to 4.9 Fast time integration at level 0 from 4.8 to 4.825 with dt = 0.025 Fast time integration at level 0 from 4.825 to 4.85 with dt = 0.025 Fast time integration at level 0 from 4.85 to 4.875 with dt = 0.025 Fast time integration at level 0 from 4.875 to 4.9 with dt = 0.025 Time integration of scalars at level 0 from 4.8 to 4.9 with dt = 0.1 using RHS created at 4.85 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 262144 cells Coarse STEP 49 ends. TIME = 4.9 DT = 0.1 Timestep time = 0.250403987 seconds. TIME= 4.9 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.04610565357 Anelastic dt at level 0 would be: 1.587527664 Fixed dt at level 0 is: 0.1 smallest even ratio is: 4 [Level 0 step 50] ADVANCE from elapsed time = 4.9 to 5 with dt = 0.1 Making slow rhs at time 4.9 for fast variables advancing from 4.9 to 4.933333333333 Fast time integration at level 0 from 4.9 to 4.933333333333 with dt = 0.03333333333333 Time integration of scalars at level 0 from 4.9 to 4.933333333333 with dt = 0.03333333333333 using RHS created at 4.9 Making slow rhs at time 4.933333333333 for fast variables advancing from 4.9 to 4.95 Fast time integration at level 0 from 4.9 to 4.925 with dt = 0.025 Fast time integration at level 0 from 4.925 to 4.95 with dt = 0.025 Time integration of scalars at level 0 from 4.9 to 4.95 with dt = 0.05 using RHS created at 4.933333333333 Making slow rhs at time 4.95 for fast variables advancing from 4.9 to 5 Fast time integration at level 0 from 4.9 to 4.925 with dt = 0.025 Fast time integration at level 0 from 4.925 to 4.95 with dt = 0.025 Fast time integration at level 0 from 4.95 to 4.975 with dt = 0.025 Fast time integration at level 0 from 4.975 to 5 with dt = 0.025 Time integration of scalars at level 0 from 4.9 to 5 with dt = 0.1 using RHS created at 4.95 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 262144 cells Coarse STEP 50 ends. TIME = 5 DT = 0.1 Timestep time = 0.250436254 seconds. TIME= 5 MASS = 1073741824 RHO THETA = 3.221225472e+11 RHO SCALAR = 0 Writing native 3D plotfile ABL-Smag_plt00050 3DPlotfile write time = 0.023541851 seconds. Writing native checkpoint ABL-Smag_chk00050 Checkpoint write time = 0.027593963 seconds. Total Time: 13.6193555 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] [TOP]::prob.A_0(nvals = 1) :: [1.0] [TOP]::prob.U_0(nvals = 1) :: [10.0] [TOP]::prob.U_0_Pert_Mag(nvals = 1) :: [0.08] [TOP]::prob.V_0(nvals = 1) :: [0.0] [TOP]::prob.V_0_Pert_Mag(nvals = 1) :: [0.08] [TOP]::prob.W_0(nvals = 1) :: [0.0] [TOP]::prob.W_0_Pert_Mag(nvals = 1) :: [0.0] Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [6987 ... 7113] [The Arena] max space (MB) allocated spread across MPI: [89 ... 89] [The Arena] max space (MB) used spread across MPI: [80 ... 80] [The Device Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Device Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [4 ... 4] AMReX (26.04-83-g515ed5e0f061) finalized