Initializing AMReX (26.05-3-g4ceb814db7d7)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.05-3-g4ceb814db7d7) initialized Successfully read inputs file ... ERF git hash: 27423c5c AMReX git hash: 26.05-3-g4ceb814db7 Problem name (from inputs file) is: "Ekman Spiral" Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (1,1,399) (0,0,0)) ((2,0,0) (3,1,399) (0,0,0)) ((0,2,0) (1,3,399) (0,0,0)) ((2,2,0) (3,3,399) (0,0,0)) ) max of zphys_nd 5000 max of zlevels 5000 Problem name "ekman spiral" is not known, no state perturbations added. Problem name "ekman spiral" is not known, no velocity perturbations added. Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937246 Fixed dt at level 0 is: 0.5 smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.008 Writing native checkpoint EkmanSpiral_custom_chk00000 Checkpoint write time = 0.025477742 seconds. Writing native 3D plotfile EkmanSpiral_custom_plt00000 3DPlotfile write time = 0.033838164 seconds. TIME= 0 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937246 Fixed dt at level 0 is: 0.5 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.5 with dt = 0.5 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1666666666667 No-substepping time integration at level 0 to 0.1666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0 to 0.1666666666667 with dt = 0.1666666666667 using RHS created at 0 Making slow rhs at time 0.1666666666667 for fast variables advancing from 0 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.25 Time integration of scalars at level 0 from 0 to 0.25 with dt = 0.25 using RHS created at 0.1666666666667 Making slow rhs at time 0.25 for fast variables advancing from 0 to 0.5 No-substepping time integration at level 0 to 0.5 with dt = 0.5 Time integration of scalars at level 0 from 0 to 0.5 with dt = 0.5 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 6400 cells Coarse STEP 1 ends. TIME = 0.5 DT = 0.5 Timestep time = 0.149276128 seconds. TIME= 0.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.780993726 Fixed dt at level 0 is: 0.5 [Level 0 step 2] ADVANCE from elapsed time = 0.5 to 1 with dt = 0.5 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.6666666666667 No-substepping time integration at level 0 to 0.6666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0.5 to 0.6666666666667 with dt = 0.1666666666667 using RHS created at 0.5 Making slow rhs at time 0.6666666666667 for fast variables advancing from 0.5 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.25 Time integration of scalars at level 0 from 0.5 to 0.75 with dt = 0.25 using RHS created at 0.6666666666667 Making slow rhs at time 0.75 for fast variables advancing from 0.5 to 1 No-substepping time integration at level 0 to 1 with dt = 0.5 Time integration of scalars at level 0 from 0.5 to 1 with dt = 0.5 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 6400 cells Coarse STEP 2 ends. TIME = 1 DT = 0.5 Timestep time = 0.14405341 seconds. TIME= 1 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937273 Fixed dt at level 0 is: 0.5 [Level 0 step 3] ADVANCE from elapsed time = 1 to 1.5 with dt = 0.5 Making slow rhs at time 1 for fast variables advancing from 1 to 1.166666666667 No-substepping time integration at level 0 to 1.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1 to 1.166666666667 with dt = 0.1666666666667 using RHS created at 1 Making slow rhs at time 1.166666666667 for fast variables advancing from 1 to 1.25 No-substepping time integration at level 0 to 1.25 with dt = 0.25 Time integration of scalars at level 0 from 1 to 1.25 with dt = 0.25 using RHS created at 1.166666666667 Making slow rhs at time 1.25 for fast variables advancing from 1 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.5 Time integration of scalars at level 0 from 1 to 1.5 with dt = 0.5 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 6400 cells Coarse STEP 3 ends. TIME = 1.5 DT = 0.5 Timestep time = 0.143839035 seconds. TIME= 1.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.7809937287 Fixed dt at level 0 is: 0.5 [Level 0 step 4] ADVANCE from elapsed time = 1.5 to 2 with dt = 0.5 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.666666666667 No-substepping time integration at level 0 to 1.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1.5 to 1.666666666667 with dt = 0.1666666666667 using RHS created at 1.5 Making slow rhs at time 1.666666666667 for fast variables advancing from 1.5 to 1.75 No-substepping time integration at level 0 to 1.75 with dt = 0.25 Time integration of scalars at level 0 from 1.5 to 1.75 with dt = 0.25 using RHS created at 1.666666666667 Making slow rhs at time 1.75 for fast variables advancing from 1.5 to 2 No-substepping time integration at level 0 to 2 with dt = 0.5 Time integration of scalars at level 0 from 1.5 to 2 with dt = 0.5 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 6400 cells Coarse STEP 4 ends. TIME = 2 DT = 0.5 Timestep time = 0.143780187 seconds. TIME= 2 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.78099373 Fixed dt at level 0 is: 0.5 [Level 0 step 5] ADVANCE from elapsed time = 2 to 2.5 with dt = 0.5 Making slow rhs at time 2 for fast variables advancing from 2 to 2.166666666667 No-substepping time integration at level 0 to 2.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2 to 2.166666666667 with dt = 0.1666666666667 using RHS created at 2 Making slow rhs at time 2.166666666667 for fast variables advancing from 2 to 2.25 No-substepping time integration at level 0 to 2.25 with dt = 0.25 Time integration of scalars at level 0 from 2 to 2.25 with dt = 0.25 using RHS created at 2.166666666667 Making slow rhs at time 2.25 for fast variables advancing from 2 to 2.5 No-substepping time integration at level 0 to 2.5 with dt = 0.5 Time integration of scalars at level 0 from 2 to 2.5 with dt = 0.5 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 6400 cells Coarse STEP 5 ends. TIME = 2.5 DT = 0.5 Timestep time = 0.14372165 seconds. TIME= 2.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.7809937314 Fixed dt at level 0 is: 0.5 [Level 0 step 6] ADVANCE from elapsed time = 2.5 to 3 with dt = 0.5 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.666666666667 No-substepping time integration at level 0 to 2.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2.5 to 2.666666666667 with dt = 0.1666666666667 using RHS created at 2.5 Making slow rhs at time 2.666666666667 for fast variables advancing from 2.5 to 2.75 No-substepping time integration at level 0 to 2.75 with dt = 0.25 Time integration of scalars at level 0 from 2.5 to 2.75 with dt = 0.25 using RHS created at 2.666666666667 Making slow rhs at time 2.75 for fast variables advancing from 2.5 to 3 No-substepping time integration at level 0 to 3 with dt = 0.5 Time integration of scalars at level 0 from 2.5 to 3 with dt = 0.5 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 6400 cells Coarse STEP 6 ends. TIME = 3 DT = 0.5 Timestep time = 0.143800982 seconds. TIME= 3 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937327 Fixed dt at level 0 is: 0.5 [Level 0 step 7] ADVANCE from elapsed time = 3 to 3.5 with dt = 0.5 Making slow rhs at time 3 for fast variables advancing from 3 to 3.166666666667 No-substepping time integration at level 0 to 3.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3 to 3.166666666667 with dt = 0.1666666666667 using RHS created at 3 Making slow rhs at time 3.166666666667 for fast variables advancing from 3 to 3.25 No-substepping time integration at level 0 to 3.25 with dt = 0.25 Time integration of scalars at level 0 from 3 to 3.25 with dt = 0.25 using RHS created at 3.166666666667 Making slow rhs at time 3.25 for fast variables advancing from 3 to 3.5 No-substepping time integration at level 0 to 3.5 with dt = 0.5 Time integration of scalars at level 0 from 3 to 3.5 with dt = 0.5 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 6400 cells Coarse STEP 7 ends. TIME = 3.5 DT = 0.5 Timestep time = 0.143814051 seconds. TIME= 3.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937341 Fixed dt at level 0 is: 0.5 [Level 0 step 8] ADVANCE from elapsed time = 3.5 to 4 with dt = 0.5 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.666666666667 No-substepping time integration at level 0 to 3.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3.5 to 3.666666666667 with dt = 0.1666666666667 using RHS created at 3.5 Making slow rhs at time 3.666666666667 for fast variables advancing from 3.5 to 3.75 No-substepping time integration at level 0 to 3.75 with dt = 0.25 Time integration of scalars at level 0 from 3.5 to 3.75 with dt = 0.25 using RHS created at 3.666666666667 Making slow rhs at time 3.75 for fast variables advancing from 3.5 to 4 No-substepping time integration at level 0 to 4 with dt = 0.5 Time integration of scalars at level 0 from 3.5 to 4 with dt = 0.5 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 6400 cells Coarse STEP 8 ends. TIME = 4 DT = 0.5 Timestep time = 0.143753593 seconds. TIME= 4 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937355 Fixed dt at level 0 is: 0.5 [Level 0 step 9] ADVANCE from elapsed time = 4 to 4.5 with dt = 0.5 Making slow rhs at time 4 for fast variables advancing from 4 to 4.166666666667 No-substepping time integration at level 0 to 4.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4 to 4.166666666667 with dt = 0.1666666666667 using RHS created at 4 Making slow rhs at time 4.166666666667 for fast variables advancing from 4 to 4.25 No-substepping time integration at level 0 to 4.25 with dt = 0.25 Time integration of scalars at level 0 from 4 to 4.25 with dt = 0.25 using RHS created at 4.166666666667 Making slow rhs at time 4.25 for fast variables advancing from 4 to 4.5 No-substepping time integration at level 0 to 4.5 with dt = 0.5 Time integration of scalars at level 0 from 4 to 4.5 with dt = 0.5 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 6400 cells Coarse STEP 9 ends. TIME = 4.5 DT = 0.5 Timestep time = 0.143907572 seconds. TIME= 4.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937368 Fixed dt at level 0 is: 0.5 [Level 0 step 10] ADVANCE from elapsed time = 4.5 to 5 with dt = 0.5 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.666666666667 No-substepping time integration at level 0 to 4.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4.5 to 4.666666666667 with dt = 0.1666666666667 using RHS created at 4.5 Making slow rhs at time 4.666666666667 for fast variables advancing from 4.5 to 4.75 No-substepping time integration at level 0 to 4.75 with dt = 0.25 Time integration of scalars at level 0 from 4.5 to 4.75 with dt = 0.25 using RHS created at 4.666666666667 Making slow rhs at time 4.75 for fast variables advancing from 4.5 to 5 No-substepping time integration at level 0 to 5 with dt = 0.5 Time integration of scalars at level 0 from 4.5 to 5 with dt = 0.5 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 6400 cells Coarse STEP 10 ends. TIME = 5 DT = 0.5 Timestep time = 0.143929296 seconds. TIME= 5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937382 Fixed dt at level 0 is: 0.5 [Level 0 step 11] ADVANCE from elapsed time = 5 to 5.5 with dt = 0.5 Making slow rhs at time 5 for fast variables advancing from 5 to 5.166666666667 No-substepping time integration at level 0 to 5.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5 to 5.166666666667 with dt = 0.1666666666667 using RHS created at 5 Making slow rhs at time 5.166666666667 for fast variables advancing from 5 to 5.25 No-substepping time integration at level 0 to 5.25 with dt = 0.25 Time integration of scalars at level 0 from 5 to 5.25 with dt = 0.25 using RHS created at 5.166666666667 Making slow rhs at time 5.25 for fast variables advancing from 5 to 5.5 No-substepping time integration at level 0 to 5.5 with dt = 0.5 Time integration of scalars at level 0 from 5 to 5.5 with dt = 0.5 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 6400 cells Coarse STEP 11 ends. TIME = 5.5 DT = 0.5 Timestep time = 0.143812951 seconds. TIME= 5.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937395 Fixed dt at level 0 is: 0.5 [Level 0 step 12] ADVANCE from elapsed time = 5.5 to 6 with dt = 0.5 Making slow rhs at time 5.5 for fast variables advancing from 5.5 to 5.666666666667 No-substepping time integration at level 0 to 5.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5.5 to 5.666666666667 with dt = 0.1666666666667 using RHS created at 5.5 Making slow rhs at time 5.666666666667 for fast variables advancing from 5.5 to 5.75 No-substepping time integration at level 0 to 5.75 with dt = 0.25 Time integration of scalars at level 0 from 5.5 to 5.75 with dt = 0.25 using RHS created at 5.666666666667 Making slow rhs at time 5.75 for fast variables advancing from 5.5 to 6 No-substepping time integration at level 0 to 6 with dt = 0.5 Time integration of scalars at level 0 from 5.5 to 6 with dt = 0.5 using RHS created at 5.75 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 6400 cells Coarse STEP 12 ends. TIME = 6 DT = 0.5 Timestep time = 0.143740363 seconds. TIME= 6 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937409 Fixed dt at level 0 is: 0.5 [Level 0 step 13] ADVANCE from elapsed time = 6 to 6.5 with dt = 0.5 Making slow rhs at time 6 for fast variables advancing from 6 to 6.166666666667 No-substepping time integration at level 0 to 6.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6 to 6.166666666667 with dt = 0.1666666666667 using RHS created at 6 Making slow rhs at time 6.166666666667 for fast variables advancing from 6 to 6.25 No-substepping time integration at level 0 to 6.25 with dt = 0.25 Time integration of scalars at level 0 from 6 to 6.25 with dt = 0.25 using RHS created at 6.166666666667 Making slow rhs at time 6.25 for fast variables advancing from 6 to 6.5 No-substepping time integration at level 0 to 6.5 with dt = 0.5 Time integration of scalars at level 0 from 6 to 6.5 with dt = 0.5 using RHS created at 6.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 6400 cells Coarse STEP 13 ends. TIME = 6.5 DT = 0.5 Timestep time = 0.143816713 seconds. TIME= 6.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937423 Fixed dt at level 0 is: 0.5 [Level 0 step 14] ADVANCE from elapsed time = 6.5 to 7 with dt = 0.5 Making slow rhs at time 6.5 for fast variables advancing from 6.5 to 6.666666666667 No-substepping time integration at level 0 to 6.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6.5 to 6.666666666667 with dt = 0.1666666666667 using RHS created at 6.5 Making slow rhs at time 6.666666666667 for fast variables advancing from 6.5 to 6.75 No-substepping time integration at level 0 to 6.75 with dt = 0.25 Time integration of scalars at level 0 from 6.5 to 6.75 with dt = 0.25 using RHS created at 6.666666666667 Making slow rhs at time 6.75 for fast variables advancing from 6.5 to 7 No-substepping time integration at level 0 to 7 with dt = 0.5 Time integration of scalars at level 0 from 6.5 to 7 with dt = 0.5 using RHS created at 6.75 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 6400 cells Coarse STEP 14 ends. TIME = 7 DT = 0.5 Timestep time = 0.14381378 seconds. TIME= 7 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937436 Fixed dt at level 0 is: 0.5 [Level 0 step 15] ADVANCE from elapsed time = 7 to 7.5 with dt = 0.5 Making slow rhs at time 7 for fast variables advancing from 7 to 7.166666666667 No-substepping time integration at level 0 to 7.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7 to 7.166666666667 with dt = 0.1666666666667 using RHS created at 7 Making slow rhs at time 7.166666666667 for fast variables advancing from 7 to 7.25 No-substepping time integration at level 0 to 7.25 with dt = 0.25 Time integration of scalars at level 0 from 7 to 7.25 with dt = 0.25 using RHS created at 7.166666666667 Making slow rhs at time 7.25 for fast variables advancing from 7 to 7.5 No-substepping time integration at level 0 to 7.5 with dt = 0.5 Time integration of scalars at level 0 from 7 to 7.5 with dt = 0.5 using RHS created at 7.25 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 6400 cells Coarse STEP 15 ends. TIME = 7.5 DT = 0.5 Timestep time = 0.143729482 seconds. TIME= 7.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.780993745 Fixed dt at level 0 is: 0.5 [Level 0 step 16] ADVANCE from elapsed time = 7.5 to 8 with dt = 0.5 Making slow rhs at time 7.5 for fast variables advancing from 7.5 to 7.666666666667 No-substepping time integration at level 0 to 7.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7.5 to 7.666666666667 with dt = 0.1666666666667 using RHS created at 7.5 Making slow rhs at time 7.666666666667 for fast variables advancing from 7.5 to 7.75 No-substepping time integration at level 0 to 7.75 with dt = 0.25 Time integration of scalars at level 0 from 7.5 to 7.75 with dt = 0.25 using RHS created at 7.666666666667 Making slow rhs at time 7.75 for fast variables advancing from 7.5 to 8 No-substepping time integration at level 0 to 8 with dt = 0.5 Time integration of scalars at level 0 from 7.5 to 8 with dt = 0.5 using RHS created at 7.75 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 6400 cells Coarse STEP 16 ends. TIME = 8 DT = 0.5 Timestep time = 0.14381432 seconds. TIME= 8 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937463 Fixed dt at level 0 is: 0.5 [Level 0 step 17] ADVANCE from elapsed time = 8 to 8.5 with dt = 0.5 Making slow rhs at time 8 for fast variables advancing from 8 to 8.166666666667 No-substepping time integration at level 0 to 8.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8 to 8.166666666667 with dt = 0.1666666666667 using RHS created at 8 Making slow rhs at time 8.166666666667 for fast variables advancing from 8 to 8.25 No-substepping time integration at level 0 to 8.25 with dt = 0.25 Time integration of scalars at level 0 from 8 to 8.25 with dt = 0.25 using RHS created at 8.166666666667 Making slow rhs at time 8.25 for fast variables advancing from 8 to 8.5 No-substepping time integration at level 0 to 8.5 with dt = 0.5 Time integration of scalars at level 0 from 8 to 8.5 with dt = 0.5 using RHS created at 8.25 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 6400 cells Coarse STEP 17 ends. TIME = 8.5 DT = 0.5 Timestep time = 0.143934397 seconds. TIME= 8.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937477 Fixed dt at level 0 is: 0.5 [Level 0 step 18] ADVANCE from elapsed time = 8.5 to 9 with dt = 0.5 Making slow rhs at time 8.5 for fast variables advancing from 8.5 to 8.666666666667 No-substepping time integration at level 0 to 8.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8.5 to 8.666666666667 with dt = 0.1666666666667 using RHS created at 8.5 Making slow rhs at time 8.666666666667 for fast variables advancing from 8.5 to 8.75 No-substepping time integration at level 0 to 8.75 with dt = 0.25 Time integration of scalars at level 0 from 8.5 to 8.75 with dt = 0.25 using RHS created at 8.666666666667 Making slow rhs at time 8.75 for fast variables advancing from 8.5 to 9 No-substepping time integration at level 0 to 9 with dt = 0.5 Time integration of scalars at level 0 from 8.5 to 9 with dt = 0.5 using RHS created at 8.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 6400 cells Coarse STEP 18 ends. TIME = 9 DT = 0.5 Timestep time = 0.143911732 seconds. TIME= 9 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.780993749 Fixed dt at level 0 is: 0.5 [Level 0 step 19] ADVANCE from elapsed time = 9 to 9.5 with dt = 0.5 Making slow rhs at time 9 for fast variables advancing from 9 to 9.166666666667 No-substepping time integration at level 0 to 9.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9 to 9.166666666667 with dt = 0.1666666666667 using RHS created at 9 Making slow rhs at time 9.166666666667 for fast variables advancing from 9 to 9.25 No-substepping time integration at level 0 to 9.25 with dt = 0.25 Time integration of scalars at level 0 from 9 to 9.25 with dt = 0.25 using RHS created at 9.166666666667 Making slow rhs at time 9.25 for fast variables advancing from 9 to 9.5 No-substepping time integration at level 0 to 9.5 with dt = 0.5 Time integration of scalars at level 0 from 9 to 9.5 with dt = 0.5 using RHS created at 9.25 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 6400 cells Coarse STEP 19 ends. TIME = 9.5 DT = 0.5 Timestep time = 0.143801162 seconds. TIME= 9.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937504 Fixed dt at level 0 is: 0.5 [Level 0 step 20] ADVANCE from elapsed time = 9.5 to 10 with dt = 0.5 Making slow rhs at time 9.5 for fast variables advancing from 9.5 to 9.666666666667 No-substepping time integration at level 0 to 9.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9.5 to 9.666666666667 with dt = 0.1666666666667 using RHS created at 9.5 Making slow rhs at time 9.666666666667 for fast variables advancing from 9.5 to 9.75 No-substepping time integration at level 0 to 9.75 with dt = 0.25 Time integration of scalars at level 0 from 9.5 to 9.75 with dt = 0.25 using RHS created at 9.666666666667 Making slow rhs at time 9.75 for fast variables advancing from 9.5 to 10 No-substepping time integration at level 0 to 10 with dt = 0.5 Time integration of scalars at level 0 from 9.5 to 10 with dt = 0.5 using RHS created at 9.75 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 6400 cells Coarse STEP 20 ends. TIME = 10 DT = 0.5 Timestep time = 0.143796647 seconds. TIME= 10 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937518 Fixed dt at level 0 is: 0.5 [Level 0 step 21] ADVANCE from elapsed time = 10 to 10.5 with dt = 0.5 Making slow rhs at time 10 for fast variables advancing from 10 to 10.16666666667 No-substepping time integration at level 0 to 10.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10 to 10.16666666667 with dt = 0.1666666666667 using RHS created at 10 Making slow rhs at time 10.16666666667 for fast variables advancing from 10 to 10.25 No-substepping time integration at level 0 to 10.25 with dt = 0.25 Time integration of scalars at level 0 from 10 to 10.25 with dt = 0.25 using RHS created at 10.16666666667 Making slow rhs at time 10.25 for fast variables advancing from 10 to 10.5 No-substepping time integration at level 0 to 10.5 with dt = 0.5 Time integration of scalars at level 0 from 10 to 10.5 with dt = 0.5 using RHS created at 10.25 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 6400 cells Coarse STEP 21 ends. TIME = 10.5 DT = 0.5 Timestep time = 0.143803263 seconds. TIME= 10.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937531 Fixed dt at level 0 is: 0.5 [Level 0 step 22] ADVANCE from elapsed time = 10.5 to 11 with dt = 0.5 Making slow rhs at time 10.5 for fast variables advancing from 10.5 to 10.66666666667 No-substepping time integration at level 0 to 10.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10.5 to 10.66666666667 with dt = 0.1666666666667 using RHS created at 10.5 Making slow rhs at time 10.66666666667 for fast variables advancing from 10.5 to 10.75 No-substepping time integration at level 0 to 10.75 with dt = 0.25 Time integration of scalars at level 0 from 10.5 to 10.75 with dt = 0.25 using RHS created at 10.66666666667 Making slow rhs at time 10.75 for fast variables advancing from 10.5 to 11 No-substepping time integration at level 0 to 11 with dt = 0.5 Time integration of scalars at level 0 from 10.5 to 11 with dt = 0.5 using RHS created at 10.75 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 6400 cells Coarse STEP 22 ends. TIME = 11 DT = 0.5 Timestep time = 0.143835099 seconds. TIME= 11 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937545 Fixed dt at level 0 is: 0.5 [Level 0 step 23] ADVANCE from elapsed time = 11 to 11.5 with dt = 0.5 Making slow rhs at time 11 for fast variables advancing from 11 to 11.16666666667 No-substepping time integration at level 0 to 11.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11 to 11.16666666667 with dt = 0.1666666666667 using RHS created at 11 Making slow rhs at time 11.16666666667 for fast variables advancing from 11 to 11.25 No-substepping time integration at level 0 to 11.25 with dt = 0.25 Time integration of scalars at level 0 from 11 to 11.25 with dt = 0.25 using RHS created at 11.16666666667 Making slow rhs at time 11.25 for fast variables advancing from 11 to 11.5 No-substepping time integration at level 0 to 11.5 with dt = 0.5 Time integration of scalars at level 0 from 11 to 11.5 with dt = 0.5 using RHS created at 11.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 6400 cells Coarse STEP 23 ends. TIME = 11.5 DT = 0.5 Timestep time = 0.143845627 seconds. TIME= 11.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937558 Fixed dt at level 0 is: 0.5 [Level 0 step 24] ADVANCE from elapsed time = 11.5 to 12 with dt = 0.5 Making slow rhs at time 11.5 for fast variables advancing from 11.5 to 11.66666666667 No-substepping time integration at level 0 to 11.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11.5 to 11.66666666667 with dt = 0.1666666666667 using RHS created at 11.5 Making slow rhs at time 11.66666666667 for fast variables advancing from 11.5 to 11.75 No-substepping time integration at level 0 to 11.75 with dt = 0.25 Time integration of scalars at level 0 from 11.5 to 11.75 with dt = 0.25 using RHS created at 11.66666666667 Making slow rhs at time 11.75 for fast variables advancing from 11.5 to 12 No-substepping time integration at level 0 to 12 with dt = 0.5 Time integration of scalars at level 0 from 11.5 to 12 with dt = 0.5 using RHS created at 11.75 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 6400 cells Coarse STEP 24 ends. TIME = 12 DT = 0.5 Timestep time = 0.143802225 seconds. TIME= 12 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937572 Fixed dt at level 0 is: 0.5 [Level 0 step 25] ADVANCE from elapsed time = 12 to 12.5 with dt = 0.5 Making slow rhs at time 12 for fast variables advancing from 12 to 12.16666666667 No-substepping time integration at level 0 to 12.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12 to 12.16666666667 with dt = 0.1666666666667 using RHS created at 12 Making slow rhs at time 12.16666666667 for fast variables advancing from 12 to 12.25 No-substepping time integration at level 0 to 12.25 with dt = 0.25 Time integration of scalars at level 0 from 12 to 12.25 with dt = 0.25 using RHS created at 12.16666666667 Making slow rhs at time 12.25 for fast variables advancing from 12 to 12.5 No-substepping time integration at level 0 to 12.5 with dt = 0.5 Time integration of scalars at level 0 from 12 to 12.5 with dt = 0.5 using RHS created at 12.25 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 6400 cells Coarse STEP 25 ends. TIME = 12.5 DT = 0.5 Timestep time = 0.143796474 seconds. TIME= 12.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937585 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666666667 No-substepping time integration at level 0 to 12.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 using RHS created at 12.5 Making slow rhs at time 12.66666666667 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666666667 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 6400 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.143699683 seconds. TIME= 13 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937599 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666666667 No-substepping time integration at level 0 to 13.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 using RHS created at 13 Making slow rhs at time 13.16666666667 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666666667 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 6400 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.143830728 seconds. TIME= 13.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937613 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666666667 No-substepping time integration at level 0 to 13.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 using RHS created at 13.5 Making slow rhs at time 13.66666666667 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666666667 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 6400 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.143820232 seconds. TIME= 14 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937626 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666666667 No-substepping time integration at level 0 to 14.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 using RHS created at 14 Making slow rhs at time 14.16666666667 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666666667 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 6400 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.143817141 seconds. TIME= 14.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.780993764 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666666667 No-substepping time integration at level 0 to 14.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 using RHS created at 14.5 Making slow rhs at time 14.66666666667 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666666667 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 6400 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.143734003 seconds. TIME= 15 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937653 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666666667 No-substepping time integration at level 0 to 15.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 using RHS created at 15 Making slow rhs at time 15.16666666667 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666666667 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 6400 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.143805617 seconds. TIME= 15.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937667 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666666667 No-substepping time integration at level 0 to 15.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 using RHS created at 15.5 Making slow rhs at time 15.66666666667 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666666667 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 6400 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.143796095 seconds. TIME= 16 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937681 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666666667 No-substepping time integration at level 0 to 16.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 using RHS created at 16 Making slow rhs at time 16.16666666667 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666666667 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 6400 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.143709585 seconds. TIME= 16.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937694 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666666667 No-substepping time integration at level 0 to 16.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 using RHS created at 16.5 Making slow rhs at time 16.66666666667 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666666667 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 6400 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.143803984 seconds. TIME= 17 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937708 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666666667 No-substepping time integration at level 0 to 17.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 using RHS created at 17 Making slow rhs at time 17.16666666667 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666666667 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 6400 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.143821768 seconds. TIME= 17.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937721 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666666667 No-substepping time integration at level 0 to 17.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 using RHS created at 17.5 Making slow rhs at time 17.66666666667 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666666667 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 6400 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.143717442 seconds. TIME= 18 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937735 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666666667 No-substepping time integration at level 0 to 18.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 using RHS created at 18 Making slow rhs at time 18.16666666667 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666666667 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 6400 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.143826614 seconds. TIME= 18.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937748 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666666667 No-substepping time integration at level 0 to 18.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 using RHS created at 18.5 Making slow rhs at time 18.66666666667 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666666667 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 6400 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.143790327 seconds. TIME= 19 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937762 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666666667 No-substepping time integration at level 0 to 19.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 using RHS created at 19 Making slow rhs at time 19.16666666667 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666666667 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 6400 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.143742902 seconds. TIME= 19.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937776 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666666667 No-substepping time integration at level 0 to 19.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 using RHS created at 19.5 Making slow rhs at time 19.66666666667 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666666667 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 6400 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.143798313 seconds. TIME= 20 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937789 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666666667 No-substepping time integration at level 0 to 20.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 using RHS created at 20 Making slow rhs at time 20.16666666667 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666666667 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 6400 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.143817615 seconds. TIME= 20.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937803 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666666667 No-substepping time integration at level 0 to 20.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 using RHS created at 20.5 Making slow rhs at time 20.66666666667 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666666667 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 6400 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.143816792 seconds. TIME= 21 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937816 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666666667 No-substepping time integration at level 0 to 21.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 using RHS created at 21 Making slow rhs at time 21.16666666667 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666666667 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 6400 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.143811981 seconds. TIME= 21.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.780993783 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666666667 No-substepping time integration at level 0 to 21.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 using RHS created at 21.5 Making slow rhs at time 21.66666666667 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666666667 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 6400 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.143816545 seconds. TIME= 22 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937844 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666666667 No-substepping time integration at level 0 to 22.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 using RHS created at 22 Making slow rhs at time 22.16666666667 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666666667 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 6400 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.143831864 seconds. TIME= 22.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937857 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666666667 No-substepping time integration at level 0 to 22.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 using RHS created at 22.5 Making slow rhs at time 22.66666666667 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666666667 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 6400 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.14371912 seconds. TIME= 23 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937871 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666666667 No-substepping time integration at level 0 to 23.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 using RHS created at 23 Making slow rhs at time 23.16666666667 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666666667 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 6400 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.143729834 seconds. TIME= 23.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937884 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666666667 No-substepping time integration at level 0 to 23.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 using RHS created at 23.5 Making slow rhs at time 23.66666666667 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666666667 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 6400 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.14382143 seconds. TIME= 24 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937898 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666666667 No-substepping time integration at level 0 to 24.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 using RHS created at 24 Making slow rhs at time 24.16666666667 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666666667 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 6400 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.143809799 seconds. TIME= 24.5 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519519 Anelastic dt at level 0 would be: 0.7809937911 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666666667 No-substepping time integration at level 0 to 24.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 using RHS created at 24.5 Making slow rhs at time 24.66666666667 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666666667 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 6400 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.143799359 seconds. TIME= 25 MASS = 12500000 RHO THETA = 3750000000 RHO SCALAR = 0 Writing native 3D plotfile EkmanSpiral_custom_plt00050 3DPlotfile write time = 0.02844416 seconds. Writing native checkpoint EkmanSpiral_custom_chk00050 Checkpoint write time = 0.027699786 seconds. Total Time: 8.723598468 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [7243 ... 7329] [The Arena] max space (MB) allocated spread across MPI: [25 ... 25] [The Arena] max space (MB) used spread across MPI: [19 ... 19] [The Device Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Device Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [1 ... 1] AMReX (26.05-3-g4ceb814db7d7) finalized