Initializing AMReX (26.06-17-g6a6dcd903f99)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.06-17-g6a6dcd903f99) initialized Successfully read inputs file ... ERF git hash: eb08d33b AMReX git hash: 26.06-17-g6a6dcd903f Problem name (from inputs file) is: "Advecting Isentropic Vortex" Level 0 is land Thermal stratification based on gradient of potential temperature Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac at level : 0 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 0 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: None Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 0 Not using any molecular diffusivity, i.e. using the modeled turbulent diffusivity Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (23,23,3) (0,0,0)) ((24,0,0) (47,23,3) (0,0,0)) ((0,24,0) (23,47,3) (0,0,0)) ((24,24,0) (47,47,3) (0,0,0)) ) max of zphys_nd 2 max of zlevels 2 No molecular or turbulent diffusion, turning off implicit solve at level 0 Based on cfl of one Compressible dt at level 0 would be: 0.0005956042672 Anelastic dt at level 0 would be: 0.0009983924735 Fixed dt at level 0 is: 0.0005 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Writing native checkpoint IsentropicVortexAdvecting_chk00000 Checkpoint write time = 0.021750437 seconds. Writing native 3D plotfile IsentropicVortexAdvecting_plt00000 3DPlotfile write time = 0.033560029 seconds. TIME= 0 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005956042672 Anelastic dt at level 0 would be: 0.0009983924735 Fixed dt at level 0 is: 0.0005 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.0005 with dt = 0.0005 Making slow rhs at time 0 for fast variables advancing from 0 to 0.0001666666666667 No-substepping time integration at level 0 to 0.0001666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0 to 0.0001666666666667 with dt = 0.0001666666666667 using RHS created at 0 Making slow rhs at time 0.0001666666666667 for fast variables advancing from 0 to 0.00025 No-substepping time integration at level 0 to 0.00025 with dt = 0.00025 Time integration of scalars at level 0 from 0 to 0.00025 with dt = 0.00025 using RHS created at 0.0001666666666667 Making slow rhs at time 0.00025 for fast variables advancing from 0 to 0.0005 No-substepping time integration at level 0 to 0.0005 with dt = 0.0005 Time integration of scalars at level 0 from 0 to 0.0005 with dt = 0.0005 using RHS created at 0.00025 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 9216 cells Coarse STEP 1 ends. TIME = 0.0005 DT = 0.0005 Timestep time = 0.114098732 seconds. TIME= 0.0005 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005899709149 Anelastic dt at level 0 would be: 0.0009753648365 Fixed dt at level 0 is: 0.0005 [Level 0 step 2] ADVANCE from elapsed time = 0.0005 to 0.001 with dt = 0.0005 Making slow rhs at time 0.0005 for fast variables advancing from 0.0005 to 0.0006666666666667 No-substepping time integration at level 0 to 0.0006666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0005 to 0.0006666666666667 with dt = 0.0001666666666667 using RHS created at 0.0005 Making slow rhs at time 0.0006666666666667 for fast variables advancing from 0.0005 to 0.00075 No-substepping time integration at level 0 to 0.00075 with dt = 0.00025 Time integration of scalars at level 0 from 0.0005 to 0.00075 with dt = 0.00025 using RHS created at 0.0006666666666667 Making slow rhs at time 0.00075 for fast variables advancing from 0.0005 to 0.001 No-substepping time integration at level 0 to 0.001 with dt = 0.0005 Time integration of scalars at level 0 from 0.0005 to 0.001 with dt = 0.0005 using RHS created at 0.00075 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 9216 cells Coarse STEP 2 ends. TIME = 0.001 DT = 0.0005 Timestep time = 0.111412781 seconds. TIME= 0.001 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005924575391 Anelastic dt at level 0 would be: 0.0009760722092 Fixed dt at level 0 is: 0.0005 [Level 0 step 3] ADVANCE from elapsed time = 0.001 to 0.0015 with dt = 0.0005 Making slow rhs at time 0.001 for fast variables advancing from 0.001 to 0.001166666666667 No-substepping time integration at level 0 to 0.001166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.001 to 0.001166666666667 with dt = 0.0001666666666667 using RHS created at 0.001 Making slow rhs at time 0.001166666666667 for fast variables advancing from 0.001 to 0.00125 No-substepping time integration at level 0 to 0.00125 with dt = 0.00025 Time integration of scalars at level 0 from 0.001 to 0.00125 with dt = 0.00025 using RHS created at 0.001166666666667 Making slow rhs at time 0.00125 for fast variables advancing from 0.001 to 0.0015 No-substepping time integration at level 0 to 0.0015 with dt = 0.0005 Time integration of scalars at level 0 from 0.001 to 0.0015 with dt = 0.0005 using RHS created at 0.00125 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 9216 cells Coarse STEP 3 ends. TIME = 0.0015 DT = 0.0005 Timestep time = 0.111400616 seconds. TIME= 0.0015 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005970071189 Anelastic dt at level 0 would be: 0.0009967993358 Fixed dt at level 0 is: 0.0005 [Level 0 step 4] ADVANCE from elapsed time = 0.0015 to 0.002 with dt = 0.0005 Making slow rhs at time 0.0015 for fast variables advancing from 0.0015 to 0.001666666666667 No-substepping time integration at level 0 to 0.001666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0015 to 0.001666666666667 with dt = 0.0001666666666667 using RHS created at 0.0015 Making slow rhs at time 0.001666666666667 for fast variables advancing from 0.0015 to 0.00175 No-substepping time integration at level 0 to 0.00175 with dt = 0.00025 Time integration of scalars at level 0 from 0.0015 to 0.00175 with dt = 0.00025 using RHS created at 0.001666666666667 Making slow rhs at time 0.00175 for fast variables advancing from 0.0015 to 0.002 No-substepping time integration at level 0 to 0.002 with dt = 0.0005 Time integration of scalars at level 0 from 0.0015 to 0.002 with dt = 0.0005 using RHS created at 0.00175 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 9216 cells Coarse STEP 4 ends. TIME = 0.002 DT = 0.0005 Timestep time = 0.111461177 seconds. TIME= 0.002 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005996635746 Anelastic dt at level 0 would be: 0.001006458642 Fixed dt at level 0 is: 0.0005 [Level 0 step 5] ADVANCE from elapsed time = 0.002 to 0.0025 with dt = 0.0005 Making slow rhs at time 0.002 for fast variables advancing from 0.002 to 0.002166666666667 No-substepping time integration at level 0 to 0.002166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.002 to 0.002166666666667 with dt = 0.0001666666666667 using RHS created at 0.002 Making slow rhs at time 0.002166666666667 for fast variables advancing from 0.002 to 0.00225 No-substepping time integration at level 0 to 0.00225 with dt = 0.00025 Time integration of scalars at level 0 from 0.002 to 0.00225 with dt = 0.00025 using RHS created at 0.002166666666667 Making slow rhs at time 0.00225 for fast variables advancing from 0.002 to 0.0025 No-substepping time integration at level 0 to 0.0025 with dt = 0.0005 Time integration of scalars at level 0 from 0.002 to 0.0025 with dt = 0.0005 using RHS created at 0.00225 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 9216 cells Coarse STEP 5 ends. TIME = 0.0025 DT = 0.0005 Timestep time = 0.111467589 seconds. TIME= 0.0025 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006000842973 Anelastic dt at level 0 would be: 0.0009944646426 Fixed dt at level 0 is: 0.0005 [Level 0 step 6] ADVANCE from elapsed time = 0.0025 to 0.003 with dt = 0.0005 Making slow rhs at time 0.0025 for fast variables advancing from 0.0025 to 0.002666666666667 No-substepping time integration at level 0 to 0.002666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0025 to 0.002666666666667 with dt = 0.0001666666666667 using RHS created at 0.0025 Making slow rhs at time 0.002666666666667 for fast variables advancing from 0.0025 to 0.00275 No-substepping time integration at level 0 to 0.00275 with dt = 0.00025 Time integration of scalars at level 0 from 0.0025 to 0.00275 with dt = 0.00025 using RHS created at 0.002666666666667 Making slow rhs at time 0.00275 for fast variables advancing from 0.0025 to 0.003 No-substepping time integration at level 0 to 0.003 with dt = 0.0005 Time integration of scalars at level 0 from 0.0025 to 0.003 with dt = 0.0005 using RHS created at 0.00275 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 9216 cells Coarse STEP 6 ends. TIME = 0.003 DT = 0.0005 Timestep time = 0.111407073 seconds. TIME= 0.003 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005986779385 Anelastic dt at level 0 would be: 0.0009995081909 Fixed dt at level 0 is: 0.0005 [Level 0 step 7] ADVANCE from elapsed time = 0.003 to 0.0035 with dt = 0.0005 Making slow rhs at time 0.003 for fast variables advancing from 0.003 to 0.003166666666667 No-substepping time integration at level 0 to 0.003166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.003 to 0.003166666666667 with dt = 0.0001666666666667 using RHS created at 0.003 Making slow rhs at time 0.003166666666667 for fast variables advancing from 0.003 to 0.00325 No-substepping time integration at level 0 to 0.00325 with dt = 0.00025 Time integration of scalars at level 0 from 0.003 to 0.00325 with dt = 0.00025 using RHS created at 0.003166666666667 Making slow rhs at time 0.00325 for fast variables advancing from 0.003 to 0.0035 No-substepping time integration at level 0 to 0.0035 with dt = 0.0005 Time integration of scalars at level 0 from 0.003 to 0.0035 with dt = 0.0005 using RHS created at 0.00325 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 9216 cells Coarse STEP 7 ends. TIME = 0.0035 DT = 0.0005 Timestep time = 0.111304847 seconds. TIME= 0.0035 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006049383761 Anelastic dt at level 0 would be: 0.001025201402 Fixed dt at level 0 is: 0.0005 [Level 0 step 8] ADVANCE from elapsed time = 0.0035 to 0.004 with dt = 0.0005 Making slow rhs at time 0.0035 for fast variables advancing from 0.0035 to 0.003666666666667 No-substepping time integration at level 0 to 0.003666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0035 to 0.003666666666667 with dt = 0.0001666666666667 using RHS created at 0.0035 Making slow rhs at time 0.003666666666667 for fast variables advancing from 0.0035 to 0.00375 No-substepping time integration at level 0 to 0.00375 with dt = 0.00025 Time integration of scalars at level 0 from 0.0035 to 0.00375 with dt = 0.00025 using RHS created at 0.003666666666667 Making slow rhs at time 0.00375 for fast variables advancing from 0.0035 to 0.004 No-substepping time integration at level 0 to 0.004 with dt = 0.0005 Time integration of scalars at level 0 from 0.0035 to 0.004 with dt = 0.0005 using RHS created at 0.00375 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 9216 cells Coarse STEP 8 ends. TIME = 0.004 DT = 0.0005 Timestep time = 0.111393488 seconds. TIME= 0.004 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006048231313 Anelastic dt at level 0 would be: 0.001008880084 Fixed dt at level 0 is: 0.0005 [Level 0 step 9] ADVANCE from elapsed time = 0.004 to 0.0045 with dt = 0.0005 Making slow rhs at time 0.004 for fast variables advancing from 0.004 to 0.004166666666667 No-substepping time integration at level 0 to 0.004166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.004 to 0.004166666666667 with dt = 0.0001666666666667 using RHS created at 0.004 Making slow rhs at time 0.004166666666667 for fast variables advancing from 0.004 to 0.00425 No-substepping time integration at level 0 to 0.00425 with dt = 0.00025 Time integration of scalars at level 0 from 0.004 to 0.00425 with dt = 0.00025 using RHS created at 0.004166666666667 Making slow rhs at time 0.00425 for fast variables advancing from 0.004 to 0.0045 No-substepping time integration at level 0 to 0.0045 with dt = 0.0005 Time integration of scalars at level 0 from 0.004 to 0.0045 with dt = 0.0005 using RHS created at 0.00425 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 9216 cells Coarse STEP 9 ends. TIME = 0.0045 DT = 0.0005 Timestep time = 0.111374533 seconds. TIME= 0.0045 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0005988051287 Anelastic dt at level 0 would be: 0.001000594583 Fixed dt at level 0 is: 0.0005 [Level 0 step 10] ADVANCE from elapsed time = 0.0045 to 0.005 with dt = 0.0005 Making slow rhs at time 0.0045 for fast variables advancing from 0.0045 to 0.004666666666667 No-substepping time integration at level 0 to 0.004666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0045 to 0.004666666666667 with dt = 0.0001666666666667 using RHS created at 0.0045 Making slow rhs at time 0.004666666666667 for fast variables advancing from 0.0045 to 0.00475 No-substepping time integration at level 0 to 0.00475 with dt = 0.00025 Time integration of scalars at level 0 from 0.0045 to 0.00475 with dt = 0.00025 using RHS created at 0.004666666666667 Making slow rhs at time 0.00475 for fast variables advancing from 0.0045 to 0.005 No-substepping time integration at level 0 to 0.005 with dt = 0.0005 Time integration of scalars at level 0 from 0.0045 to 0.005 with dt = 0.0005 using RHS created at 0.00475 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 9216 cells Coarse STEP 10 ends. TIME = 0.005 DT = 0.0005 Timestep time = 0.11137521 seconds. TIME= 0.005 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Writing native 3D plotfile IsentropicVortexAdvecting_plt00010 3DPlotfile write time = 0.032639946 seconds. Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006015755615 Anelastic dt at level 0 would be: 0.001015833357 Fixed dt at level 0 is: 0.0005 [Level 0 step 11] ADVANCE from elapsed time = 0.005 to 0.0055 with dt = 0.0005 Making slow rhs at time 0.005 for fast variables advancing from 0.005 to 0.005166666666667 No-substepping time integration at level 0 to 0.005166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.005 to 0.005166666666667 with dt = 0.0001666666666667 using RHS created at 0.005 Making slow rhs at time 0.005166666666667 for fast variables advancing from 0.005 to 0.00525 No-substepping time integration at level 0 to 0.00525 with dt = 0.00025 Time integration of scalars at level 0 from 0.005 to 0.00525 with dt = 0.00025 using RHS created at 0.005166666666667 Making slow rhs at time 0.00525 for fast variables advancing from 0.005 to 0.0055 No-substepping time integration at level 0 to 0.0055 with dt = 0.0005 Time integration of scalars at level 0 from 0.005 to 0.0055 with dt = 0.0005 using RHS created at 0.00525 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 9216 cells Coarse STEP 11 ends. TIME = 0.0055 DT = 0.0005 Timestep time = 0.111375309 seconds. TIME= 0.0055 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006067128657 Anelastic dt at level 0 would be: 0.001030357312 Fixed dt at level 0 is: 0.0005 [Level 0 step 12] ADVANCE from elapsed time = 0.0055 to 0.006 with dt = 0.0005 Making slow rhs at time 0.0055 for fast variables advancing from 0.0055 to 0.005666666666667 No-substepping time integration at level 0 to 0.005666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0055 to 0.005666666666667 with dt = 0.0001666666666667 using RHS created at 0.0055 Making slow rhs at time 0.005666666666667 for fast variables advancing from 0.0055 to 0.00575 No-substepping time integration at level 0 to 0.00575 with dt = 0.00025 Time integration of scalars at level 0 from 0.0055 to 0.00575 with dt = 0.00025 using RHS created at 0.005666666666667 Making slow rhs at time 0.00575 for fast variables advancing from 0.0055 to 0.006 No-substepping time integration at level 0 to 0.006 with dt = 0.0005 Time integration of scalars at level 0 from 0.0055 to 0.006 with dt = 0.0005 using RHS created at 0.00575 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 9216 cells Coarse STEP 12 ends. TIME = 0.006 DT = 0.0005 Timestep time = 0.111395326 seconds. TIME= 0.006 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006026938153 Anelastic dt at level 0 would be: 0.00100986149 Fixed dt at level 0 is: 0.0005 [Level 0 step 13] ADVANCE from elapsed time = 0.006 to 0.0065 with dt = 0.0005 Making slow rhs at time 0.006 for fast variables advancing from 0.006 to 0.006166666666667 No-substepping time integration at level 0 to 0.006166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.006 to 0.006166666666667 with dt = 0.0001666666666667 using RHS created at 0.006 Making slow rhs at time 0.006166666666667 for fast variables advancing from 0.006 to 0.00625 No-substepping time integration at level 0 to 0.00625 with dt = 0.00025 Time integration of scalars at level 0 from 0.006 to 0.00625 with dt = 0.00025 using RHS created at 0.006166666666667 Making slow rhs at time 0.00625 for fast variables advancing from 0.006 to 0.0065 No-substepping time integration at level 0 to 0.0065 with dt = 0.0005 Time integration of scalars at level 0 from 0.006 to 0.0065 with dt = 0.0005 using RHS created at 0.00625 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 9216 cells Coarse STEP 13 ends. TIME = 0.0065 DT = 0.0005 Timestep time = 0.111382037 seconds. TIME= 0.0065 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000601845746 Anelastic dt at level 0 would be: 0.001014257769 Fixed dt at level 0 is: 0.0005 [Level 0 step 14] ADVANCE from elapsed time = 0.0065 to 0.007 with dt = 0.0005 Making slow rhs at time 0.0065 for fast variables advancing from 0.0065 to 0.006666666666667 No-substepping time integration at level 0 to 0.006666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0065 to 0.006666666666667 with dt = 0.0001666666666667 using RHS created at 0.0065 Making slow rhs at time 0.006666666666667 for fast variables advancing from 0.0065 to 0.00675 No-substepping time integration at level 0 to 0.00675 with dt = 0.00025 Time integration of scalars at level 0 from 0.0065 to 0.00675 with dt = 0.00025 using RHS created at 0.006666666666667 Making slow rhs at time 0.00675 for fast variables advancing from 0.0065 to 0.007 No-substepping time integration at level 0 to 0.007 with dt = 0.0005 Time integration of scalars at level 0 from 0.0065 to 0.007 with dt = 0.0005 using RHS created at 0.00675 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 9216 cells Coarse STEP 14 ends. TIME = 0.007 DT = 0.0005 Timestep time = 0.111360022 seconds. TIME= 0.007 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006055322712 Anelastic dt at level 0 would be: 0.001029580668 Fixed dt at level 0 is: 0.0005 [Level 0 step 15] ADVANCE from elapsed time = 0.007 to 0.0075 with dt = 0.0005 Making slow rhs at time 0.007 for fast variables advancing from 0.007 to 0.007166666666667 No-substepping time integration at level 0 to 0.007166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.007 to 0.007166666666667 with dt = 0.0001666666666667 using RHS created at 0.007 Making slow rhs at time 0.007166666666667 for fast variables advancing from 0.007 to 0.00725 No-substepping time integration at level 0 to 0.00725 with dt = 0.00025 Time integration of scalars at level 0 from 0.007 to 0.00725 with dt = 0.00025 using RHS created at 0.007166666666667 Making slow rhs at time 0.00725 for fast variables advancing from 0.007 to 0.0075 No-substepping time integration at level 0 to 0.0075 with dt = 0.0005 Time integration of scalars at level 0 from 0.007 to 0.0075 with dt = 0.0005 using RHS created at 0.00725 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 9216 cells Coarse STEP 15 ends. TIME = 0.0075 DT = 0.0005 Timestep time = 0.111374221 seconds. TIME= 0.0075 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006105207218 Anelastic dt at level 0 would be: 0.001027732629 Fixed dt at level 0 is: 0.0005 [Level 0 step 16] ADVANCE from elapsed time = 0.0075 to 0.008 with dt = 0.0005 Making slow rhs at time 0.0075 for fast variables advancing from 0.0075 to 0.007666666666667 No-substepping time integration at level 0 to 0.007666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0075 to 0.007666666666667 with dt = 0.0001666666666667 using RHS created at 0.0075 Making slow rhs at time 0.007666666666667 for fast variables advancing from 0.0075 to 0.00775 No-substepping time integration at level 0 to 0.00775 with dt = 0.00025 Time integration of scalars at level 0 from 0.0075 to 0.00775 with dt = 0.00025 using RHS created at 0.007666666666667 Making slow rhs at time 0.00775 for fast variables advancing from 0.0075 to 0.008 No-substepping time integration at level 0 to 0.008 with dt = 0.0005 Time integration of scalars at level 0 from 0.0075 to 0.008 with dt = 0.0005 using RHS created at 0.00775 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 9216 cells Coarse STEP 16 ends. TIME = 0.008 DT = 0.0005 Timestep time = 0.111367473 seconds. TIME= 0.008 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006050644947 Anelastic dt at level 0 would be: 0.001019219235 Fixed dt at level 0 is: 0.0005 [Level 0 step 17] ADVANCE from elapsed time = 0.008 to 0.0085 with dt = 0.0005 Making slow rhs at time 0.008 for fast variables advancing from 0.008 to 0.008166666666667 No-substepping time integration at level 0 to 0.008166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.008 to 0.008166666666667 with dt = 0.0001666666666667 using RHS created at 0.008 Making slow rhs at time 0.008166666666667 for fast variables advancing from 0.008 to 0.00825 No-substepping time integration at level 0 to 0.00825 with dt = 0.00025 Time integration of scalars at level 0 from 0.008 to 0.00825 with dt = 0.00025 using RHS created at 0.008166666666667 Making slow rhs at time 0.00825 for fast variables advancing from 0.008 to 0.0085 No-substepping time integration at level 0 to 0.0085 with dt = 0.0005 Time integration of scalars at level 0 from 0.008 to 0.0085 with dt = 0.0005 using RHS created at 0.00825 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 9216 cells Coarse STEP 17 ends. TIME = 0.0085 DT = 0.0005 Timestep time = 0.11126615 seconds. TIME= 0.0085 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006073445002 Anelastic dt at level 0 would be: 0.00103250196 Fixed dt at level 0 is: 0.0005 [Level 0 step 18] ADVANCE from elapsed time = 0.0085 to 0.009 with dt = 0.0005 Making slow rhs at time 0.0085 for fast variables advancing from 0.0085 to 0.008666666666667 No-substepping time integration at level 0 to 0.008666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0085 to 0.008666666666667 with dt = 0.0001666666666667 using RHS created at 0.0085 Making slow rhs at time 0.008666666666667 for fast variables advancing from 0.0085 to 0.00875 No-substepping time integration at level 0 to 0.00875 with dt = 0.00025 Time integration of scalars at level 0 from 0.0085 to 0.00875 with dt = 0.00025 using RHS created at 0.008666666666667 Making slow rhs at time 0.00875 for fast variables advancing from 0.0085 to 0.009 No-substepping time integration at level 0 to 0.009 with dt = 0.0005 Time integration of scalars at level 0 from 0.0085 to 0.009 with dt = 0.0005 using RHS created at 0.00875 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 9216 cells Coarse STEP 18 ends. TIME = 0.009 DT = 0.0005 Timestep time = 0.111357669 seconds. TIME= 0.009 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006103084682 Anelastic dt at level 0 would be: 0.001044737886 Fixed dt at level 0 is: 0.0005 [Level 0 step 19] ADVANCE from elapsed time = 0.009 to 0.0095 with dt = 0.0005 Making slow rhs at time 0.009 for fast variables advancing from 0.009 to 0.009166666666667 No-substepping time integration at level 0 to 0.009166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.009 to 0.009166666666667 with dt = 0.0001666666666667 using RHS created at 0.009 Making slow rhs at time 0.009166666666667 for fast variables advancing from 0.009 to 0.00925 No-substepping time integration at level 0 to 0.00925 with dt = 0.00025 Time integration of scalars at level 0 from 0.009 to 0.00925 with dt = 0.00025 using RHS created at 0.009166666666667 Making slow rhs at time 0.00925 for fast variables advancing from 0.009 to 0.0095 No-substepping time integration at level 0 to 0.0095 with dt = 0.0005 Time integration of scalars at level 0 from 0.009 to 0.0095 with dt = 0.0005 using RHS created at 0.00925 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 9216 cells Coarse STEP 19 ends. TIME = 0.0095 DT = 0.0005 Timestep time = 0.111343033 seconds. TIME= 0.0095 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006097992014 Anelastic dt at level 0 would be: 0.001029043208 Fixed dt at level 0 is: 0.0005 [Level 0 step 20] ADVANCE from elapsed time = 0.0095 to 0.01 with dt = 0.0005 Making slow rhs at time 0.0095 for fast variables advancing from 0.0095 to 0.009666666666667 No-substepping time integration at level 0 to 0.009666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0095 to 0.009666666666667 with dt = 0.0001666666666667 using RHS created at 0.0095 Making slow rhs at time 0.009666666666667 for fast variables advancing from 0.0095 to 0.00975 No-substepping time integration at level 0 to 0.00975 with dt = 0.00025 Time integration of scalars at level 0 from 0.0095 to 0.00975 with dt = 0.00025 using RHS created at 0.009666666666667 Making slow rhs at time 0.00975 for fast variables advancing from 0.0095 to 0.01 No-substepping time integration at level 0 to 0.01 with dt = 0.0005 Time integration of scalars at level 0 from 0.0095 to 0.01 with dt = 0.0005 using RHS created at 0.00975 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 9216 cells Coarse STEP 20 ends. TIME = 0.01 DT = 0.0005 Timestep time = 0.111349394 seconds. TIME= 0.01 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Writing native 3D plotfile IsentropicVortexAdvecting_plt00020 3DPlotfile write time = 0.025492601 seconds. Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006078949922 Anelastic dt at level 0 would be: 0.001030675303 Fixed dt at level 0 is: 0.0005 [Level 0 step 21] ADVANCE from elapsed time = 0.01 to 0.0105 with dt = 0.0005 Making slow rhs at time 0.01 for fast variables advancing from 0.01 to 0.01016666666667 No-substepping time integration at level 0 to 0.01016666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.01 to 0.01016666666667 with dt = 0.0001666666666667 using RHS created at 0.01 Making slow rhs at time 0.01016666666667 for fast variables advancing from 0.01 to 0.01025 No-substepping time integration at level 0 to 0.01025 with dt = 0.00025 Time integration of scalars at level 0 from 0.01 to 0.01025 with dt = 0.00025 using RHS created at 0.01016666666667 Making slow rhs at time 0.01025 for fast variables advancing from 0.01 to 0.0105 No-substepping time integration at level 0 to 0.0105 with dt = 0.0005 Time integration of scalars at level 0 from 0.01 to 0.0105 with dt = 0.0005 using RHS created at 0.01025 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 9216 cells Coarse STEP 21 ends. TIME = 0.0105 DT = 0.0005 Timestep time = 0.111350331 seconds. TIME= 0.0105 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006106531462 Anelastic dt at level 0 would be: 0.001043594271 Fixed dt at level 0 is: 0.0005 [Level 0 step 22] ADVANCE from elapsed time = 0.0105 to 0.011 with dt = 0.0005 Making slow rhs at time 0.0105 for fast variables advancing from 0.0105 to 0.01066666666667 No-substepping time integration at level 0 to 0.01066666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0105 to 0.01066666666667 with dt = 0.0001666666666667 using RHS created at 0.0105 Making slow rhs at time 0.01066666666667 for fast variables advancing from 0.0105 to 0.01075 No-substepping time integration at level 0 to 0.01075 with dt = 0.00025 Time integration of scalars at level 0 from 0.0105 to 0.01075 with dt = 0.00025 using RHS created at 0.01066666666667 Making slow rhs at time 0.01075 for fast variables advancing from 0.0105 to 0.011 No-substepping time integration at level 0 to 0.011 with dt = 0.0005 Time integration of scalars at level 0 from 0.0105 to 0.011 with dt = 0.0005 using RHS created at 0.01075 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 9216 cells Coarse STEP 22 ends. TIME = 0.011 DT = 0.0005 Timestep time = 0.111345077 seconds. TIME= 0.011 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006155302227 Anelastic dt at level 0 would be: 0.001045036315 Fixed dt at level 0 is: 0.0005 [Level 0 step 23] ADVANCE from elapsed time = 0.011 to 0.0115 with dt = 0.0005 Making slow rhs at time 0.011 for fast variables advancing from 0.011 to 0.01116666666667 No-substepping time integration at level 0 to 0.01116666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.011 to 0.01116666666667 with dt = 0.0001666666666667 using RHS created at 0.011 Making slow rhs at time 0.01116666666667 for fast variables advancing from 0.011 to 0.01125 No-substepping time integration at level 0 to 0.01125 with dt = 0.00025 Time integration of scalars at level 0 from 0.011 to 0.01125 with dt = 0.00025 using RHS created at 0.01116666666667 Making slow rhs at time 0.01125 for fast variables advancing from 0.011 to 0.0115 No-substepping time integration at level 0 to 0.0115 with dt = 0.0005 Time integration of scalars at level 0 from 0.011 to 0.0115 with dt = 0.0005 using RHS created at 0.01125 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 9216 cells Coarse STEP 23 ends. TIME = 0.0115 DT = 0.0005 Timestep time = 0.111330346 seconds. TIME= 0.0115 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006105998085 Anelastic dt at level 0 would be: 0.0010355464 Fixed dt at level 0 is: 0.0005 [Level 0 step 24] ADVANCE from elapsed time = 0.0115 to 0.012 with dt = 0.0005 Making slow rhs at time 0.0115 for fast variables advancing from 0.0115 to 0.01166666666667 No-substepping time integration at level 0 to 0.01166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0115 to 0.01166666666667 with dt = 0.0001666666666667 using RHS created at 0.0115 Making slow rhs at time 0.01166666666667 for fast variables advancing from 0.0115 to 0.01175 No-substepping time integration at level 0 to 0.01175 with dt = 0.00025 Time integration of scalars at level 0 from 0.0115 to 0.01175 with dt = 0.00025 using RHS created at 0.01166666666667 Making slow rhs at time 0.01175 for fast variables advancing from 0.0115 to 0.012 No-substepping time integration at level 0 to 0.012 with dt = 0.0005 Time integration of scalars at level 0 from 0.0115 to 0.012 with dt = 0.0005 using RHS created at 0.01175 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 9216 cells Coarse STEP 24 ends. TIME = 0.012 DT = 0.0005 Timestep time = 0.11134726 seconds. TIME= 0.012 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006124956882 Anelastic dt at level 0 would be: 0.001047635074 Fixed dt at level 0 is: 0.0005 [Level 0 step 25] ADVANCE from elapsed time = 0.012 to 0.0125 with dt = 0.0005 Making slow rhs at time 0.012 for fast variables advancing from 0.012 to 0.01216666666667 No-substepping time integration at level 0 to 0.01216666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.012 to 0.01216666666667 with dt = 0.0001666666666667 using RHS created at 0.012 Making slow rhs at time 0.01216666666667 for fast variables advancing from 0.012 to 0.01225 No-substepping time integration at level 0 to 0.01225 with dt = 0.00025 Time integration of scalars at level 0 from 0.012 to 0.01225 with dt = 0.00025 using RHS created at 0.01216666666667 Making slow rhs at time 0.01225 for fast variables advancing from 0.012 to 0.0125 No-substepping time integration at level 0 to 0.0125 with dt = 0.0005 Time integration of scalars at level 0 from 0.012 to 0.0125 with dt = 0.0005 using RHS created at 0.01225 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 9216 cells Coarse STEP 25 ends. TIME = 0.0125 DT = 0.0005 Timestep time = 0.111341993 seconds. TIME= 0.0125 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006143343767 Anelastic dt at level 0 would be: 0.001056956598 Fixed dt at level 0 is: 0.0005 [Level 0 step 26] ADVANCE from elapsed time = 0.0125 to 0.013 with dt = 0.0005 Making slow rhs at time 0.0125 for fast variables advancing from 0.0125 to 0.01266666666667 No-substepping time integration at level 0 to 0.01266666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0125 to 0.01266666666667 with dt = 0.0001666666666667 using RHS created at 0.0125 Making slow rhs at time 0.01266666666667 for fast variables advancing from 0.0125 to 0.01275 No-substepping time integration at level 0 to 0.01275 with dt = 0.00025 Time integration of scalars at level 0 from 0.0125 to 0.01275 with dt = 0.00025 using RHS created at 0.01266666666667 Making slow rhs at time 0.01275 for fast variables advancing from 0.0125 to 0.013 No-substepping time integration at level 0 to 0.013 with dt = 0.0005 Time integration of scalars at level 0 from 0.0125 to 0.013 with dt = 0.0005 using RHS created at 0.01275 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 9216 cells Coarse STEP 26 ends. TIME = 0.013 DT = 0.0005 Timestep time = 0.111341558 seconds. TIME= 0.013 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006155485943 Anelastic dt at level 0 would be: 0.001047362039 Fixed dt at level 0 is: 0.0005 [Level 0 step 27] ADVANCE from elapsed time = 0.013 to 0.0135 with dt = 0.0005 Making slow rhs at time 0.013 for fast variables advancing from 0.013 to 0.01316666666667 No-substepping time integration at level 0 to 0.01316666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.013 to 0.01316666666667 with dt = 0.0001666666666667 using RHS created at 0.013 Making slow rhs at time 0.01316666666667 for fast variables advancing from 0.013 to 0.01325 No-substepping time integration at level 0 to 0.01325 with dt = 0.00025 Time integration of scalars at level 0 from 0.013 to 0.01325 with dt = 0.00025 using RHS created at 0.01316666666667 Making slow rhs at time 0.01325 for fast variables advancing from 0.013 to 0.0135 No-substepping time integration at level 0 to 0.0135 with dt = 0.0005 Time integration of scalars at level 0 from 0.013 to 0.0135 with dt = 0.0005 using RHS created at 0.01325 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 9216 cells Coarse STEP 27 ends. TIME = 0.0135 DT = 0.0005 Timestep time = 0.111334448 seconds. TIME= 0.0135 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006138132468 Anelastic dt at level 0 would be: 0.001048969668 Fixed dt at level 0 is: 0.0005 [Level 0 step 28] ADVANCE from elapsed time = 0.0135 to 0.014 with dt = 0.0005 Making slow rhs at time 0.0135 for fast variables advancing from 0.0135 to 0.01366666666667 No-substepping time integration at level 0 to 0.01366666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0135 to 0.01366666666667 with dt = 0.0001666666666667 using RHS created at 0.0135 Making slow rhs at time 0.01366666666667 for fast variables advancing from 0.0135 to 0.01375 No-substepping time integration at level 0 to 0.01375 with dt = 0.00025 Time integration of scalars at level 0 from 0.0135 to 0.01375 with dt = 0.00025 using RHS created at 0.01366666666667 Making slow rhs at time 0.01375 for fast variables advancing from 0.0135 to 0.014 No-substepping time integration at level 0 to 0.014 with dt = 0.0005 Time integration of scalars at level 0 from 0.0135 to 0.014 with dt = 0.0005 using RHS created at 0.01375 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 9216 cells Coarse STEP 28 ends. TIME = 0.014 DT = 0.0005 Timestep time = 0.111349486 seconds. TIME= 0.014 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006149815755 Anelastic dt at level 0 would be: 0.001057309948 Fixed dt at level 0 is: 0.0005 [Level 0 step 29] ADVANCE from elapsed time = 0.014 to 0.0145 with dt = 0.0005 Making slow rhs at time 0.014 for fast variables advancing from 0.014 to 0.01416666666667 No-substepping time integration at level 0 to 0.01416666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.014 to 0.01416666666667 with dt = 0.0001666666666667 using RHS created at 0.014 Making slow rhs at time 0.01416666666667 for fast variables advancing from 0.014 to 0.01425 No-substepping time integration at level 0 to 0.01425 with dt = 0.00025 Time integration of scalars at level 0 from 0.014 to 0.01425 with dt = 0.00025 using RHS created at 0.01416666666667 Making slow rhs at time 0.01425 for fast variables advancing from 0.014 to 0.0145 No-substepping time integration at level 0 to 0.0145 with dt = 0.0005 Time integration of scalars at level 0 from 0.014 to 0.0145 with dt = 0.0005 using RHS created at 0.01425 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 9216 cells Coarse STEP 29 ends. TIME = 0.0145 DT = 0.0005 Timestep time = 0.111259013 seconds. TIME= 0.0145 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000619542042 Anelastic dt at level 0 would be: 0.00106540557 Fixed dt at level 0 is: 0.0005 [Level 0 step 30] ADVANCE from elapsed time = 0.0145 to 0.015 with dt = 0.0005 Making slow rhs at time 0.0145 for fast variables advancing from 0.0145 to 0.01466666666667 No-substepping time integration at level 0 to 0.01466666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0145 to 0.01466666666667 with dt = 0.0001666666666667 using RHS created at 0.0145 Making slow rhs at time 0.01466666666667 for fast variables advancing from 0.0145 to 0.01475 No-substepping time integration at level 0 to 0.01475 with dt = 0.00025 Time integration of scalars at level 0 from 0.0145 to 0.01475 with dt = 0.00025 using RHS created at 0.01466666666667 Making slow rhs at time 0.01475 for fast variables advancing from 0.0145 to 0.015 No-substepping time integration at level 0 to 0.015 with dt = 0.0005 Time integration of scalars at level 0 from 0.0145 to 0.015 with dt = 0.0005 using RHS created at 0.01475 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 9216 cells Coarse STEP 30 ends. TIME = 0.015 DT = 0.0005 Timestep time = 0.111344948 seconds. TIME= 0.015 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Writing native 3D plotfile IsentropicVortexAdvecting_plt00030 3DPlotfile write time = 0.024920908 seconds. Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000617045976 Anelastic dt at level 0 would be: 0.001056133454 Fixed dt at level 0 is: 0.0005 [Level 0 step 31] ADVANCE from elapsed time = 0.015 to 0.0155 with dt = 0.0005 Making slow rhs at time 0.015 for fast variables advancing from 0.015 to 0.01516666666667 No-substepping time integration at level 0 to 0.01516666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.015 to 0.01516666666667 with dt = 0.0001666666666667 using RHS created at 0.015 Making slow rhs at time 0.01516666666667 for fast variables advancing from 0.015 to 0.01525 No-substepping time integration at level 0 to 0.01525 with dt = 0.00025 Time integration of scalars at level 0 from 0.015 to 0.01525 with dt = 0.00025 using RHS created at 0.01516666666667 Making slow rhs at time 0.01525 for fast variables advancing from 0.015 to 0.0155 No-substepping time integration at level 0 to 0.0155 with dt = 0.0005 Time integration of scalars at level 0 from 0.015 to 0.0155 with dt = 0.0005 using RHS created at 0.01525 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 9216 cells Coarse STEP 31 ends. TIME = 0.0155 DT = 0.0005 Timestep time = 0.111351667 seconds. TIME= 0.0155 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006172966255 Anelastic dt at level 0 would be: 0.001062756306 Fixed dt at level 0 is: 0.0005 [Level 0 step 32] ADVANCE from elapsed time = 0.0155 to 0.016 with dt = 0.0005 Making slow rhs at time 0.0155 for fast variables advancing from 0.0155 to 0.01566666666667 No-substepping time integration at level 0 to 0.01566666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0155 to 0.01566666666667 with dt = 0.0001666666666667 using RHS created at 0.0155 Making slow rhs at time 0.01566666666667 for fast variables advancing from 0.0155 to 0.01575 No-substepping time integration at level 0 to 0.01575 with dt = 0.00025 Time integration of scalars at level 0 from 0.0155 to 0.01575 with dt = 0.00025 using RHS created at 0.01566666666667 Making slow rhs at time 0.01575 for fast variables advancing from 0.0155 to 0.016 No-substepping time integration at level 0 to 0.016 with dt = 0.0005 Time integration of scalars at level 0 from 0.0155 to 0.016 with dt = 0.0005 using RHS created at 0.01575 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 9216 cells Coarse STEP 32 ends. TIME = 0.016 DT = 0.0005 Timestep time = 0.111348944 seconds. TIME= 0.016 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006188234744 Anelastic dt at level 0 would be: 0.001071419263 Fixed dt at level 0 is: 0.0005 [Level 0 step 33] ADVANCE from elapsed time = 0.016 to 0.0165 with dt = 0.0005 Making slow rhs at time 0.016 for fast variables advancing from 0.016 to 0.01616666666667 No-substepping time integration at level 0 to 0.01616666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.016 to 0.01616666666667 with dt = 0.0001666666666667 using RHS created at 0.016 Making slow rhs at time 0.01616666666667 for fast variables advancing from 0.016 to 0.01625 No-substepping time integration at level 0 to 0.01625 with dt = 0.00025 Time integration of scalars at level 0 from 0.016 to 0.01625 with dt = 0.00025 using RHS created at 0.01616666666667 Making slow rhs at time 0.01625 for fast variables advancing from 0.016 to 0.0165 No-substepping time integration at level 0 to 0.0165 with dt = 0.0005 Time integration of scalars at level 0 from 0.016 to 0.0165 with dt = 0.0005 using RHS created at 0.01625 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 9216 cells Coarse STEP 33 ends. TIME = 0.0165 DT = 0.0005 Timestep time = 0.111350299 seconds. TIME= 0.0165 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006220389829 Anelastic dt at level 0 would be: 0.001068623655 Fixed dt at level 0 is: 0.0005 [Level 0 step 34] ADVANCE from elapsed time = 0.0165 to 0.017 with dt = 0.0005 Making slow rhs at time 0.0165 for fast variables advancing from 0.0165 to 0.01666666666667 No-substepping time integration at level 0 to 0.01666666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0165 to 0.01666666666667 with dt = 0.0001666666666667 using RHS created at 0.0165 Making slow rhs at time 0.01666666666667 for fast variables advancing from 0.0165 to 0.01675 No-substepping time integration at level 0 to 0.01675 with dt = 0.00025 Time integration of scalars at level 0 from 0.0165 to 0.01675 with dt = 0.00025 using RHS created at 0.01666666666667 Making slow rhs at time 0.01675 for fast variables advancing from 0.0165 to 0.017 No-substepping time integration at level 0 to 0.017 with dt = 0.0005 Time integration of scalars at level 0 from 0.0165 to 0.017 with dt = 0.0005 using RHS created at 0.01675 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 9216 cells Coarse STEP 34 ends. TIME = 0.017 DT = 0.0005 Timestep time = 0.111266554 seconds. TIME= 0.017 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006200697983 Anelastic dt at level 0 would be: 0.001069282057 Fixed dt at level 0 is: 0.0005 [Level 0 step 35] ADVANCE from elapsed time = 0.017 to 0.0175 with dt = 0.0005 Making slow rhs at time 0.017 for fast variables advancing from 0.017 to 0.01716666666667 No-substepping time integration at level 0 to 0.01716666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.017 to 0.01716666666667 with dt = 0.0001666666666667 using RHS created at 0.017 Making slow rhs at time 0.01716666666667 for fast variables advancing from 0.017 to 0.01725 No-substepping time integration at level 0 to 0.01725 with dt = 0.00025 Time integration of scalars at level 0 from 0.017 to 0.01725 with dt = 0.00025 using RHS created at 0.01716666666667 Making slow rhs at time 0.01725 for fast variables advancing from 0.017 to 0.0175 No-substepping time integration at level 0 to 0.0175 with dt = 0.0005 Time integration of scalars at level 0 from 0.017 to 0.0175 with dt = 0.0005 using RHS created at 0.01725 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 9216 cells Coarse STEP 35 ends. TIME = 0.0175 DT = 0.0005 Timestep time = 0.111264984 seconds. TIME= 0.0175 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006196296411 Anelastic dt at level 0 would be: 0.001072353974 Fixed dt at level 0 is: 0.0005 [Level 0 step 36] ADVANCE from elapsed time = 0.0175 to 0.018 with dt = 0.0005 Making slow rhs at time 0.0175 for fast variables advancing from 0.0175 to 0.01766666666667 No-substepping time integration at level 0 to 0.01766666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0175 to 0.01766666666667 with dt = 0.0001666666666667 using RHS created at 0.0175 Making slow rhs at time 0.01766666666667 for fast variables advancing from 0.0175 to 0.01775 No-substepping time integration at level 0 to 0.01775 with dt = 0.00025 Time integration of scalars at level 0 from 0.0175 to 0.01775 with dt = 0.00025 using RHS created at 0.01766666666667 Making slow rhs at time 0.01775 for fast variables advancing from 0.0175 to 0.018 No-substepping time integration at level 0 to 0.018 with dt = 0.0005 Time integration of scalars at level 0 from 0.0175 to 0.018 with dt = 0.0005 using RHS created at 0.01775 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 9216 cells Coarse STEP 36 ends. TIME = 0.018 DT = 0.0005 Timestep time = 0.111272798 seconds. TIME= 0.018 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006237262559 Anelastic dt at level 0 would be: 0.001086089652 Fixed dt at level 0 is: 0.0005 [Level 0 step 37] ADVANCE from elapsed time = 0.018 to 0.0185 with dt = 0.0005 Making slow rhs at time 0.018 for fast variables advancing from 0.018 to 0.01816666666667 No-substepping time integration at level 0 to 0.01816666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.018 to 0.01816666666667 with dt = 0.0001666666666667 using RHS created at 0.018 Making slow rhs at time 0.01816666666667 for fast variables advancing from 0.018 to 0.01825 No-substepping time integration at level 0 to 0.01825 with dt = 0.00025 Time integration of scalars at level 0 from 0.018 to 0.01825 with dt = 0.00025 using RHS created at 0.01816666666667 Making slow rhs at time 0.01825 for fast variables advancing from 0.018 to 0.0185 No-substepping time integration at level 0 to 0.0185 with dt = 0.0005 Time integration of scalars at level 0 from 0.018 to 0.0185 with dt = 0.0005 using RHS created at 0.01825 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 9216 cells Coarse STEP 37 ends. TIME = 0.0185 DT = 0.0005 Timestep time = 0.111338503 seconds. TIME= 0.0185 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006232063034 Anelastic dt at level 0 would be: 0.00107632487 Fixed dt at level 0 is: 0.0005 [Level 0 step 38] ADVANCE from elapsed time = 0.0185 to 0.019 with dt = 0.0005 Making slow rhs at time 0.0185 for fast variables advancing from 0.0185 to 0.01866666666667 No-substepping time integration at level 0 to 0.01866666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0185 to 0.01866666666667 with dt = 0.0001666666666667 using RHS created at 0.0185 Making slow rhs at time 0.01866666666667 for fast variables advancing from 0.0185 to 0.01875 No-substepping time integration at level 0 to 0.01875 with dt = 0.00025 Time integration of scalars at level 0 from 0.0185 to 0.01875 with dt = 0.00025 using RHS created at 0.01866666666667 Making slow rhs at time 0.01875 for fast variables advancing from 0.0185 to 0.019 No-substepping time integration at level 0 to 0.019 with dt = 0.0005 Time integration of scalars at level 0 from 0.0185 to 0.019 with dt = 0.0005 using RHS created at 0.01875 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 9216 cells Coarse STEP 38 ends. TIME = 0.019 DT = 0.0005 Timestep time = 0.111364854 seconds. TIME= 0.019 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006219224131 Anelastic dt at level 0 would be: 0.001077701757 Fixed dt at level 0 is: 0.0005 [Level 0 step 39] ADVANCE from elapsed time = 0.019 to 0.0195 with dt = 0.0005 Making slow rhs at time 0.019 for fast variables advancing from 0.019 to 0.01916666666667 No-substepping time integration at level 0 to 0.01916666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.019 to 0.01916666666667 with dt = 0.0001666666666667 using RHS created at 0.019 Making slow rhs at time 0.01916666666667 for fast variables advancing from 0.019 to 0.01925 No-substepping time integration at level 0 to 0.01925 with dt = 0.00025 Time integration of scalars at level 0 from 0.019 to 0.01925 with dt = 0.00025 using RHS created at 0.01916666666667 Making slow rhs at time 0.01925 for fast variables advancing from 0.019 to 0.0195 No-substepping time integration at level 0 to 0.0195 with dt = 0.0005 Time integration of scalars at level 0 from 0.019 to 0.0195 with dt = 0.0005 using RHS created at 0.01925 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 9216 cells Coarse STEP 39 ends. TIME = 0.0195 DT = 0.0005 Timestep time = 0.111353018 seconds. TIME= 0.0195 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006231765984 Anelastic dt at level 0 would be: 0.001085557412 Fixed dt at level 0 is: 0.0005 [Level 0 step 40] ADVANCE from elapsed time = 0.0195 to 0.02 with dt = 0.0005 Making slow rhs at time 0.0195 for fast variables advancing from 0.0195 to 0.01966666666667 No-substepping time integration at level 0 to 0.01966666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0195 to 0.01966666666667 with dt = 0.0001666666666667 using RHS created at 0.0195 Making slow rhs at time 0.01966666666667 for fast variables advancing from 0.0195 to 0.01975 No-substepping time integration at level 0 to 0.01975 with dt = 0.00025 Time integration of scalars at level 0 from 0.0195 to 0.01975 with dt = 0.00025 using RHS created at 0.01966666666667 Making slow rhs at time 0.01975 for fast variables advancing from 0.0195 to 0.02 No-substepping time integration at level 0 to 0.02 with dt = 0.0005 Time integration of scalars at level 0 from 0.0195 to 0.02 with dt = 0.0005 using RHS created at 0.01975 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 9216 cells Coarse STEP 40 ends. TIME = 0.02 DT = 0.0005 Timestep time = 0.111354399 seconds. TIME= 0.02 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Writing native 3D plotfile IsentropicVortexAdvecting_plt00040 3DPlotfile write time = 0.025664531 seconds. Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006278819568 Anelastic dt at level 0 would be: 0.001088022271 Fixed dt at level 0 is: 0.0005 [Level 0 step 41] ADVANCE from elapsed time = 0.02 to 0.0205 with dt = 0.0005 Making slow rhs at time 0.02 for fast variables advancing from 0.02 to 0.02016666666667 No-substepping time integration at level 0 to 0.02016666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.02 to 0.02016666666667 with dt = 0.0001666666666667 using RHS created at 0.02 Making slow rhs at time 0.02016666666667 for fast variables advancing from 0.02 to 0.02025 No-substepping time integration at level 0 to 0.02025 with dt = 0.00025 Time integration of scalars at level 0 from 0.02 to 0.02025 with dt = 0.00025 using RHS created at 0.02016666666667 Making slow rhs at time 0.02025 for fast variables advancing from 0.02 to 0.0205 No-substepping time integration at level 0 to 0.0205 with dt = 0.0005 Time integration of scalars at level 0 from 0.02 to 0.0205 with dt = 0.0005 using RHS created at 0.02025 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 9216 cells Coarse STEP 41 ends. TIME = 0.0205 DT = 0.0005 Timestep time = 0.111347804 seconds. TIME= 0.0205 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006256172011 Anelastic dt at level 0 would be: 0.001087328154 Fixed dt at level 0 is: 0.0005 [Level 0 step 42] ADVANCE from elapsed time = 0.0205 to 0.021 with dt = 0.0005 Making slow rhs at time 0.0205 for fast variables advancing from 0.0205 to 0.02066666666667 No-substepping time integration at level 0 to 0.02066666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0205 to 0.02066666666667 with dt = 0.0001666666666667 using RHS created at 0.0205 Making slow rhs at time 0.02066666666667 for fast variables advancing from 0.0205 to 0.02075 No-substepping time integration at level 0 to 0.02075 with dt = 0.00025 Time integration of scalars at level 0 from 0.0205 to 0.02075 with dt = 0.00025 using RHS created at 0.02066666666667 Making slow rhs at time 0.02075 for fast variables advancing from 0.0205 to 0.021 No-substepping time integration at level 0 to 0.021 with dt = 0.0005 Time integration of scalars at level 0 from 0.0205 to 0.021 with dt = 0.0005 using RHS created at 0.02075 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 9216 cells Coarse STEP 42 ends. TIME = 0.021 DT = 0.0005 Timestep time = 0.111337639 seconds. TIME= 0.021 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006240491773 Anelastic dt at level 0 would be: 0.001086547325 Fixed dt at level 0 is: 0.0005 [Level 0 step 43] ADVANCE from elapsed time = 0.021 to 0.0215 with dt = 0.0005 Making slow rhs at time 0.021 for fast variables advancing from 0.021 to 0.02116666666667 No-substepping time integration at level 0 to 0.02116666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.021 to 0.02116666666667 with dt = 0.0001666666666667 using RHS created at 0.021 Making slow rhs at time 0.02116666666667 for fast variables advancing from 0.021 to 0.02125 No-substepping time integration at level 0 to 0.02125 with dt = 0.00025 Time integration of scalars at level 0 from 0.021 to 0.02125 with dt = 0.00025 using RHS created at 0.02116666666667 Making slow rhs at time 0.02125 for fast variables advancing from 0.021 to 0.0215 No-substepping time integration at level 0 to 0.0215 with dt = 0.0005 Time integration of scalars at level 0 from 0.021 to 0.0215 with dt = 0.0005 using RHS created at 0.02125 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 9216 cells Coarse STEP 43 ends. TIME = 0.0215 DT = 0.0005 Timestep time = 0.111330886 seconds. TIME= 0.0215 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006279019711 Anelastic dt at level 0 would be: 0.00110229046 Fixed dt at level 0 is: 0.0005 [Level 0 step 44] ADVANCE from elapsed time = 0.0215 to 0.022 with dt = 0.0005 Making slow rhs at time 0.0215 for fast variables advancing from 0.0215 to 0.02166666666667 No-substepping time integration at level 0 to 0.02166666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0215 to 0.02166666666667 with dt = 0.0001666666666667 using RHS created at 0.0215 Making slow rhs at time 0.02166666666667 for fast variables advancing from 0.0215 to 0.02175 No-substepping time integration at level 0 to 0.02175 with dt = 0.00025 Time integration of scalars at level 0 from 0.0215 to 0.02175 with dt = 0.00025 using RHS created at 0.02166666666667 Making slow rhs at time 0.02175 for fast variables advancing from 0.0215 to 0.022 No-substepping time integration at level 0 to 0.022 with dt = 0.0005 Time integration of scalars at level 0 from 0.0215 to 0.022 with dt = 0.0005 using RHS created at 0.02175 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 9216 cells Coarse STEP 44 ends. TIME = 0.022 DT = 0.0005 Timestep time = 0.111331321 seconds. TIME= 0.022 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006286100372 Anelastic dt at level 0 would be: 0.001094181951 Fixed dt at level 0 is: 0.0005 [Level 0 step 45] ADVANCE from elapsed time = 0.022 to 0.0225 with dt = 0.0005 Making slow rhs at time 0.022 for fast variables advancing from 0.022 to 0.02216666666667 No-substepping time integration at level 0 to 0.02216666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.022 to 0.02216666666667 with dt = 0.0001666666666667 using RHS created at 0.022 Making slow rhs at time 0.02216666666667 for fast variables advancing from 0.022 to 0.02225 No-substepping time integration at level 0 to 0.02225 with dt = 0.00025 Time integration of scalars at level 0 from 0.022 to 0.02225 with dt = 0.00025 using RHS created at 0.02216666666667 Making slow rhs at time 0.02225 for fast variables advancing from 0.022 to 0.0225 No-substepping time integration at level 0 to 0.0225 with dt = 0.0005 Time integration of scalars at level 0 from 0.022 to 0.0225 with dt = 0.0005 using RHS created at 0.02225 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 9216 cells Coarse STEP 45 ends. TIME = 0.0225 DT = 0.0005 Timestep time = 0.111425803 seconds. TIME= 0.0225 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006262780049 Anelastic dt at level 0 would be: 0.001091703205 Fixed dt at level 0 is: 0.0005 [Level 0 step 46] ADVANCE from elapsed time = 0.0225 to 0.023 with dt = 0.0005 Making slow rhs at time 0.0225 for fast variables advancing from 0.0225 to 0.02266666666667 No-substepping time integration at level 0 to 0.02266666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0225 to 0.02266666666667 with dt = 0.0001666666666667 using RHS created at 0.0225 Making slow rhs at time 0.02266666666667 for fast variables advancing from 0.0225 to 0.02275 No-substepping time integration at level 0 to 0.02275 with dt = 0.00025 Time integration of scalars at level 0 from 0.0225 to 0.02275 with dt = 0.00025 using RHS created at 0.02266666666667 Making slow rhs at time 0.02275 for fast variables advancing from 0.0225 to 0.023 No-substepping time integration at level 0 to 0.023 with dt = 0.0005 Time integration of scalars at level 0 from 0.0225 to 0.023 with dt = 0.0005 using RHS created at 0.02275 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 9216 cells Coarse STEP 46 ends. TIME = 0.023 DT = 0.0005 Timestep time = 0.111345701 seconds. TIME= 0.023 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000627436388 Anelastic dt at level 0 would be: 0.001099196075 Fixed dt at level 0 is: 0.0005 [Level 0 step 47] ADVANCE from elapsed time = 0.023 to 0.0235 with dt = 0.0005 Making slow rhs at time 0.023 for fast variables advancing from 0.023 to 0.02316666666667 No-substepping time integration at level 0 to 0.02316666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.023 to 0.02316666666667 with dt = 0.0001666666666667 using RHS created at 0.023 Making slow rhs at time 0.02316666666667 for fast variables advancing from 0.023 to 0.02325 No-substepping time integration at level 0 to 0.02325 with dt = 0.00025 Time integration of scalars at level 0 from 0.023 to 0.02325 with dt = 0.00025 using RHS created at 0.02316666666667 Making slow rhs at time 0.02325 for fast variables advancing from 0.023 to 0.0235 No-substepping time integration at level 0 to 0.0235 with dt = 0.0005 Time integration of scalars at level 0 from 0.023 to 0.0235 with dt = 0.0005 using RHS created at 0.02325 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 9216 cells Coarse STEP 47 ends. TIME = 0.0235 DT = 0.0005 Timestep time = 0.111292183 seconds. TIME= 0.0235 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006328977449 Anelastic dt at level 0 would be: 0.001104954251 Fixed dt at level 0 is: 0.0005 [Level 0 step 48] ADVANCE from elapsed time = 0.0235 to 0.024 with dt = 0.0005 Making slow rhs at time 0.0235 for fast variables advancing from 0.0235 to 0.02366666666667 No-substepping time integration at level 0 to 0.02366666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0235 to 0.02366666666667 with dt = 0.0001666666666667 using RHS created at 0.0235 Making slow rhs at time 0.02366666666667 for fast variables advancing from 0.0235 to 0.02375 No-substepping time integration at level 0 to 0.02375 with dt = 0.00025 Time integration of scalars at level 0 from 0.0235 to 0.02375 with dt = 0.00025 using RHS created at 0.02366666666667 Making slow rhs at time 0.02375 for fast variables advancing from 0.0235 to 0.024 No-substepping time integration at level 0 to 0.024 with dt = 0.0005 Time integration of scalars at level 0 from 0.0235 to 0.024 with dt = 0.0005 using RHS created at 0.02375 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 9216 cells Coarse STEP 48 ends. TIME = 0.024 DT = 0.0005 Timestep time = 0.111491981 seconds. TIME= 0.024 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006297904815 Anelastic dt at level 0 would be: 0.001100913288 Fixed dt at level 0 is: 0.0005 [Level 0 step 49] ADVANCE from elapsed time = 0.024 to 0.0245 with dt = 0.0005 Making slow rhs at time 0.024 for fast variables advancing from 0.024 to 0.02416666666667 No-substepping time integration at level 0 to 0.02416666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.024 to 0.02416666666667 with dt = 0.0001666666666667 using RHS created at 0.024 Making slow rhs at time 0.02416666666667 for fast variables advancing from 0.024 to 0.02425 No-substepping time integration at level 0 to 0.02425 with dt = 0.00025 Time integration of scalars at level 0 from 0.024 to 0.02425 with dt = 0.00025 using RHS created at 0.02416666666667 Making slow rhs at time 0.02425 for fast variables advancing from 0.024 to 0.0245 No-substepping time integration at level 0 to 0.0245 with dt = 0.0005 Time integration of scalars at level 0 from 0.024 to 0.0245 with dt = 0.0005 using RHS created at 0.02425 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 9216 cells Coarse STEP 49 ends. TIME = 0.0245 DT = 0.0005 Timestep time = 0.111273116 seconds. TIME= 0.0245 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0006282849975 Anelastic dt at level 0 would be: 0.001100182285 Fixed dt at level 0 is: 0.0005 [Level 0 step 50] ADVANCE from elapsed time = 0.0245 to 0.025 with dt = 0.0005 Making slow rhs at time 0.0245 for fast variables advancing from 0.0245 to 0.02466666666667 No-substepping time integration at level 0 to 0.02466666666667 with dt = 0.0001666666666667 Time integration of scalars at level 0 from 0.0245 to 0.02466666666667 with dt = 0.0001666666666667 using RHS created at 0.0245 Making slow rhs at time 0.02466666666667 for fast variables advancing from 0.0245 to 0.02475 No-substepping time integration at level 0 to 0.02475 with dt = 0.00025 Time integration of scalars at level 0 from 0.0245 to 0.02475 with dt = 0.00025 using RHS created at 0.02466666666667 Making slow rhs at time 0.02475 for fast variables advancing from 0.0245 to 0.025 No-substepping time integration at level 0 to 0.025 with dt = 0.0005 Time integration of scalars at level 0 from 0.0245 to 0.025 with dt = 0.0005 using RHS created at 0.02475 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 9216 cells Coarse STEP 50 ends. TIME = 0.025 DT = 0.0005 Timestep time = 0.111344348 seconds. TIME= 0.025 MASS = 1333.894875 RHO THETA = 400168.4625 RHO SCALAR = 0.9307577615 Writing native 3D plotfile IsentropicVortexAdvecting_plt00050 3DPlotfile write time = 0.046476025 seconds. Writing native checkpoint IsentropicVortexAdvecting_chk00050 Checkpoint write time = 0.029368059 seconds. Total Time: 6.606371086 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] [TOP]::amr.ref_ratio_vect(nvals = 6) :: [2, 2, 1, 2, 2, 1] [TOP]::erf.alpha_C(nvals = 1) :: [0.0] [TOP]::erf.alpha_T(nvals = 1) :: [0.0] [TOP]::erf.lo_scalar.field_name(nvals = 1) :: [scalar] [TOP]::erf.lo_scalar.max_level(nvals = 1) :: [2] [TOP]::erf.lo_scalar.value_greater(nvals = 1) :: [0.1] [TOP]::erf.refinement_indicators(nvals = 1) :: [lo_scalar] Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [7243 ... 7311] [The Arena] max space (MB) allocated spread across MPI: [17 ... 17] [The Arena] max space (MB) used spread across MPI: [12 ... 12] [The Device Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Device Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [0 ... 0] AMReX (26.06-17-g6a6dcd903f99) finalized