Initializing AMReX (26.08-27-g28ba7777ca50)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.08-27-g28ba7777ca50) initialized Successfully read inputs file ... ERF git hash: d54348e6 AMReX git hash: 26.08-27-g28ba7777ca Problem name (from inputs file) is: "Bubble" Level 0 is land Using constant kinematic diffusion coefficients momentum : 0 m^2/s temperature : 0 m^2/s scalar : 0 m^2/s Thermal stratification based on gradient of potential temperature Turning off native vertical implicit solve from vert_implicit flag at level 0 Maximum simulation length based on stop_time: 3600 s (elapsed) Adding stop time 3600 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with implicit substepping vert_implicit_fac at level 0 : 0 0 0 use_coriolis : 0 use_gravity : 1 Moisture Model: Morrison Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: None Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : Upwind_3rd moistscal_vert_adv_type : Upwind_3rd Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 0 Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 WRF lateral boundary density forcing: disabled WRF lateral boundary cloud-water/cloud-ice forcing: disabled Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (49,3,99) (0,0,0)) ((50,0,0) (99,3,99) (0,0,0)) ((100,0,0) (149,3,99) (0,0,0)) ((150,0,0) (199,3,99) (0,0,0)) ) Bubble delta T = -15 K centered at (10000 0 2000) with extent (2000 0 2000) Based on cfl of one Compressible dt at level 0 would be: 0.8829810579 (terrain aware) 0.8829810579 (terrain unaware) Anelastic dt at level 0 would be undefined Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 Note: Molecular diffusion specified but dynamic_viscosity has not been specified Max value of |p_hse - p_eos| is less than 1e-8 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Min/Max value of x-gradient of full (moist) pressure are -0.1588846925 0.1588846925 with min at face (110,0,17) with max at face (90,0,17) Min/max value of y-gradient of full (moist) pressure are zero Min/max value of moist dp/dz + rho_m*|g| are -0.1943805894 0.1538861509 with min at face (99,1,26) with max at face (99,0,7) Min/max value of -dp'/dz + buoyancy are -0.1538861509 0.1943805894 with min at face (99,0,7) with max at face (99,0,26) Morrison: the following additional variables are available to plot: micro_rho micro_theta micro_temp micro_pres micro_qv micro_qc micro_qi micro_qn micro_qt micro_qp micro_qrain micro_qsnow micro_qgraup micro_nc micro_ni micro_nr micro_ns micro_ng micro_omega Writing native 3D plotfile Bubble_Morrison_plt00000 3DPlotfile write time = 0.046311807 seconds. TIME= 0 MASS = 5.886316959e+10 RHO THETA = 1.820132753e+13 RHO SCALAR = 0 RHO QTOTAL = 1177263392 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8829810579 (terrain aware) 0.8829810579 (terrain unaware) Anelastic dt at level 0 would be undefined Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.5 with dt = 0.5 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1666666666667 Fast time integration at level 0 from 0 to 0.1666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0 to 0.1666666666667 with dt = 0.1666666666667 using RHS created at 0 Making slow rhs at time 0.1666666666667 for fast variables advancing from 0 to 0.25 Fast time integration at level 0 from 0 to 0.125 with dt = 0.125 Fast time integration at level 0 from 0.125 to 0.25 with dt = 0.125 Time integration of scalars at level 0 from 0 to 0.25 with dt = 0.25 using RHS created at 0.1666666666667 Making slow rhs at time 0.25 for fast variables advancing from 0 to 0.5 Fast time integration at level 0 from 0 to 0.125 with dt = 0.125 Fast time integration at level 0 from 0.125 to 0.25 with dt = 0.125 Fast time integration at level 0 from 0.25 to 0.375 with dt = 0.125 Fast time integration at level 0 from 0.375 to 0.5 with dt = 0.125 Time integration of scalars at level 0 from 0 to 0.5 with dt = 0.5 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 80000 cells Cloud fraction 0 1 Coarse STEP 1 ends. TIME = 0.5 DT = 0.5 Timestep time = 0.416000136 seconds. TIME= 0.5 MASS = 5.886316959e+10 RHO THETA = 1.820122471e+13 RHO SCALAR = 0 RHO QTOTAL = 1177259187 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8829825669 (terrain aware) 0.8829825669 (terrain unaware) Anelastic dt at level 0 would be: 966.0371354 (terrain aware) 966.0371354 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 2] ADVANCE from elapsed time = 0.5 to 1 with dt = 0.5 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.6666666666667 Fast time integration at level 0 from 0.5 to 0.6666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0.5 to 0.6666666666667 with dt = 0.1666666666667 using RHS created at 0.5 Making slow rhs at time 0.6666666666667 for fast variables advancing from 0.5 to 0.75 Fast time integration at level 0 from 0.5 to 0.625 with dt = 0.125 Fast time integration at level 0 from 0.625 to 0.75 with dt = 0.125 Time integration of scalars at level 0 from 0.5 to 0.75 with dt = 0.25 using RHS created at 0.6666666666667 Making slow rhs at time 0.75 for fast variables advancing from 0.5 to 1 Fast time integration at level 0 from 0.5 to 0.625 with dt = 0.125 Fast time integration at level 0 from 0.625 to 0.75 with dt = 0.125 Fast time integration at level 0 from 0.75 to 0.875 with dt = 0.125 Fast time integration at level 0 from 0.875 to 1 with dt = 0.125 Time integration of scalars at level 0 from 0.5 to 1 with dt = 0.5 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 80000 cells Cloud fraction 0.5 1 Coarse STEP 2 ends. TIME = 1 DT = 0.5 Timestep time = 0.425500585 seconds. TIME= 1 MASS = 5.886316959e+10 RHO THETA = 1.820205207e+13 RHO SCALAR = 0 RHO QTOTAL = 1177254944 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8829404208 (terrain aware) 0.8829404208 (terrain unaware) Anelastic dt at level 0 would be: 537.6748627 (terrain aware) 537.6748627 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 3] ADVANCE from elapsed time = 1 to 1.5 with dt = 0.5 Making slow rhs at time 1 for fast variables advancing from 1 to 1.166666666667 Fast time integration at level 0 from 1 to 1.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1 to 1.166666666667 with dt = 0.1666666666667 using RHS created at 1 Making slow rhs at time 1.166666666667 for fast variables advancing from 1 to 1.25 Fast time integration at level 0 from 1 to 1.125 with dt = 0.125 Fast time integration at level 0 from 1.125 to 1.25 with dt = 0.125 Time integration of scalars at level 0 from 1 to 1.25 with dt = 0.25 using RHS created at 1.166666666667 Making slow rhs at time 1.25 for fast variables advancing from 1 to 1.5 Fast time integration at level 0 from 1 to 1.125 with dt = 0.125 Fast time integration at level 0 from 1.125 to 1.25 with dt = 0.125 Fast time integration at level 0 from 1.25 to 1.375 with dt = 0.125 Fast time integration at level 0 from 1.375 to 1.5 with dt = 0.125 Time integration of scalars at level 0 from 1 to 1.5 with dt = 0.5 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 80000 cells Cloud fraction 1 1 Coarse STEP 3 ends. TIME = 1.5 DT = 0.5 Timestep time = 0.4199006 seconds. TIME= 1.5 MASS = 5.886316959e+10 RHO THETA = 1.820272201e+13 RHO SCALAR = 0 RHO QTOTAL = 1177250688 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8828663181 (terrain aware) 0.8828663181 (terrain unaware) Anelastic dt at level 0 would be: 387.0957382 (terrain aware) 387.0957382 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 4] ADVANCE from elapsed time = 1.5 to 2 with dt = 0.5 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.666666666667 Fast time integration at level 0 from 1.5 to 1.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1.5 to 1.666666666667 with dt = 0.1666666666667 using RHS created at 1.5 Making slow rhs at time 1.666666666667 for fast variables advancing from 1.5 to 1.75 Fast time integration at level 0 from 1.5 to 1.625 with dt = 0.125 Fast time integration at level 0 from 1.625 to 1.75 with dt = 0.125 Time integration of scalars at level 0 from 1.5 to 1.75 with dt = 0.25 using RHS created at 1.666666666667 Making slow rhs at time 1.75 for fast variables advancing from 1.5 to 2 Fast time integration at level 0 from 1.5 to 1.625 with dt = 0.125 Fast time integration at level 0 from 1.625 to 1.75 with dt = 0.125 Fast time integration at level 0 from 1.75 to 1.875 with dt = 0.125 Fast time integration at level 0 from 1.875 to 2 with dt = 0.125 Time integration of scalars at level 0 from 1.5 to 2 with dt = 0.5 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 80000 cells Cloud fraction 1.5 1 Coarse STEP 4 ends. TIME = 2 DT = 0.5 Timestep time = 0.420195155 seconds. TIME= 2 MASS = 5.886316959e+10 RHO THETA = 1.820334479e+13 RHO SCALAR = 0 RHO QTOTAL = 1177246425 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8827643402 (terrain aware) 0.8827643402 (terrain unaware) Anelastic dt at level 0 would be: 318.671336 (terrain aware) 318.671336 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 5] ADVANCE from elapsed time = 2 to 2.5 with dt = 0.5 Making slow rhs at time 2 for fast variables advancing from 2 to 2.166666666667 Fast time integration at level 0 from 2 to 2.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2 to 2.166666666667 with dt = 0.1666666666667 using RHS created at 2 Making slow rhs at time 2.166666666667 for fast variables advancing from 2 to 2.25 Fast time integration at level 0 from 2 to 2.125 with dt = 0.125 Fast time integration at level 0 from 2.125 to 2.25 with dt = 0.125 Time integration of scalars at level 0 from 2 to 2.25 with dt = 0.25 using RHS created at 2.166666666667 Making slow rhs at time 2.25 for fast variables advancing from 2 to 2.5 Fast time integration at level 0 from 2 to 2.125 with dt = 0.125 Fast time integration at level 0 from 2.125 to 2.25 with dt = 0.125 Fast time integration at level 0 from 2.25 to 2.375 with dt = 0.125 Fast time integration at level 0 from 2.375 to 2.5 with dt = 0.125 Time integration of scalars at level 0 from 2 to 2.5 with dt = 0.5 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 80000 cells Cloud fraction 2 1 Coarse STEP 5 ends. TIME = 2.5 DT = 0.5 Timestep time = 0.420073744 seconds. TIME= 2.5 MASS = 5.886316959e+10 RHO THETA = 1.820392064e+13 RHO SCALAR = 0 RHO QTOTAL = 1177242155 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.882644943 (terrain aware) 0.882644943 (terrain unaware) Anelastic dt at level 0 would be: 285.3404574 (terrain aware) 285.3404574 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 6] ADVANCE from elapsed time = 2.5 to 3 with dt = 0.5 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.666666666667 Fast time integration at level 0 from 2.5 to 2.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2.5 to 2.666666666667 with dt = 0.1666666666667 using RHS created at 2.5 Making slow rhs at time 2.666666666667 for fast variables advancing from 2.5 to 2.75 Fast time integration at level 0 from 2.5 to 2.625 with dt = 0.125 Fast time integration at level 0 from 2.625 to 2.75 with dt = 0.125 Time integration of scalars at level 0 from 2.5 to 2.75 with dt = 0.25 using RHS created at 2.666666666667 Making slow rhs at time 2.75 for fast variables advancing from 2.5 to 3 Fast time integration at level 0 from 2.5 to 2.625 with dt = 0.125 Fast time integration at level 0 from 2.625 to 2.75 with dt = 0.125 Fast time integration at level 0 from 2.75 to 2.875 with dt = 0.125 Fast time integration at level 0 from 2.875 to 3 with dt = 0.125 Time integration of scalars at level 0 from 2.5 to 3 with dt = 0.5 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 80000 cells Cloud fraction 2.5 1 Coarse STEP 6 ends. TIME = 3 DT = 0.5 Timestep time = 0.423512245 seconds. TIME= 3 MASS = 5.886316959e+10 RHO THETA = 1.820446514e+13 RHO SCALAR = 0 RHO QTOTAL = 1177237879 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8825186644 (terrain aware) 0.8825186644 (terrain unaware) Anelastic dt at level 0 would be: 272.3755377 (terrain aware) 272.3755377 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 7] ADVANCE from elapsed time = 3 to 3.5 with dt = 0.5 Making slow rhs at time 3 for fast variables advancing from 3 to 3.166666666667 Fast time integration at level 0 from 3 to 3.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3 to 3.166666666667 with dt = 0.1666666666667 using RHS created at 3 Making slow rhs at time 3.166666666667 for fast variables advancing from 3 to 3.25 Fast time integration at level 0 from 3 to 3.125 with dt = 0.125 Fast time integration at level 0 from 3.125 to 3.25 with dt = 0.125 Time integration of scalars at level 0 from 3 to 3.25 with dt = 0.25 using RHS created at 3.166666666667 Making slow rhs at time 3.25 for fast variables advancing from 3 to 3.5 Fast time integration at level 0 from 3 to 3.125 with dt = 0.125 Fast time integration at level 0 from 3.125 to 3.25 with dt = 0.125 Fast time integration at level 0 from 3.25 to 3.375 with dt = 0.125 Fast time integration at level 0 from 3.375 to 3.5 with dt = 0.125 Time integration of scalars at level 0 from 3 to 3.5 with dt = 0.5 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 80000 cells Cloud fraction 3 1 Coarse STEP 7 ends. TIME = 3.5 DT = 0.5 Timestep time = 0.42534296 seconds. TIME= 3.5 MASS = 5.886316959e+10 RHO THETA = 1.820498465e+13 RHO SCALAR = 0 RHO QTOTAL = 1177233600 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8823954549 (terrain aware) 0.8823954549 (terrain unaware) Anelastic dt at level 0 would be: 274.6887872 (terrain aware) 274.6887872 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 8] ADVANCE from elapsed time = 3.5 to 4 with dt = 0.5 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.666666666667 Fast time integration at level 0 from 3.5 to 3.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3.5 to 3.666666666667 with dt = 0.1666666666667 using RHS created at 3.5 Making slow rhs at time 3.666666666667 for fast variables advancing from 3.5 to 3.75 Fast time integration at level 0 from 3.5 to 3.625 with dt = 0.125 Fast time integration at level 0 from 3.625 to 3.75 with dt = 0.125 Time integration of scalars at level 0 from 3.5 to 3.75 with dt = 0.25 using RHS created at 3.666666666667 Making slow rhs at time 3.75 for fast variables advancing from 3.5 to 4 Fast time integration at level 0 from 3.5 to 3.625 with dt = 0.125 Fast time integration at level 0 from 3.625 to 3.75 with dt = 0.125 Fast time integration at level 0 from 3.75 to 3.875 with dt = 0.125 Fast time integration at level 0 from 3.875 to 4 with dt = 0.125 Time integration of scalars at level 0 from 3.5 to 4 with dt = 0.5 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 80000 cells Cloud fraction 3.5 1 Coarse STEP 8 ends. TIME = 4 DT = 0.5 Timestep time = 0.425979561 seconds. TIME= 4 MASS = 5.886316959e+10 RHO THETA = 1.820548267e+13 RHO SCALAR = 0 RHO QTOTAL = 1177229319 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8822845125 (terrain aware) 0.8822845125 (terrain unaware) Anelastic dt at level 0 would be: 291.1249525 (terrain aware) 291.1249525 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 9] ADVANCE from elapsed time = 4 to 4.5 with dt = 0.5 Making slow rhs at time 4 for fast variables advancing from 4 to 4.166666666667 Fast time integration at level 0 from 4 to 4.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4 to 4.166666666667 with dt = 0.1666666666667 using RHS created at 4 Making slow rhs at time 4.166666666667 for fast variables advancing from 4 to 4.25 Fast time integration at level 0 from 4 to 4.125 with dt = 0.125 Fast time integration at level 0 from 4.125 to 4.25 with dt = 0.125 Time integration of scalars at level 0 from 4 to 4.25 with dt = 0.25 using RHS created at 4.166666666667 Making slow rhs at time 4.25 for fast variables advancing from 4 to 4.5 Fast time integration at level 0 from 4 to 4.125 with dt = 0.125 Fast time integration at level 0 from 4.125 to 4.25 with dt = 0.125 Fast time integration at level 0 from 4.25 to 4.375 with dt = 0.125 Fast time integration at level 0 from 4.375 to 4.5 with dt = 0.125 Time integration of scalars at level 0 from 4 to 4.5 with dt = 0.5 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 80000 cells Cloud fraction 4 1 Coarse STEP 9 ends. TIME = 4.5 DT = 0.5 Timestep time = 0.425573927 seconds. TIME= 4.5 MASS = 5.886316959e+10 RHO THETA = 1.820596234e+13 RHO SCALAR = 0 RHO QTOTAL = 1177225036 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8821869152 (terrain aware) 0.8821869152 (terrain unaware) Anelastic dt at level 0 would be: 321.6358929 (terrain aware) 321.6358929 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 10] ADVANCE from elapsed time = 4.5 to 5 with dt = 0.5 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.666666666667 Fast time integration at level 0 from 4.5 to 4.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4.5 to 4.666666666667 with dt = 0.1666666666667 using RHS created at 4.5 Making slow rhs at time 4.666666666667 for fast variables advancing from 4.5 to 4.75 Fast time integration at level 0 from 4.5 to 4.625 with dt = 0.125 Fast time integration at level 0 from 4.625 to 4.75 with dt = 0.125 Time integration of scalars at level 0 from 4.5 to 4.75 with dt = 0.25 using RHS created at 4.666666666667 Making slow rhs at time 4.75 for fast variables advancing from 4.5 to 5 Fast time integration at level 0 from 4.5 to 4.625 with dt = 0.125 Fast time integration at level 0 from 4.625 to 4.75 with dt = 0.125 Fast time integration at level 0 from 4.75 to 4.875 with dt = 0.125 Fast time integration at level 0 from 4.875 to 5 with dt = 0.125 Time integration of scalars at level 0 from 4.5 to 5 with dt = 0.5 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 80000 cells Cloud fraction 4.5 1 Coarse STEP 10 ends. TIME = 5 DT = 0.5 Timestep time = 0.425880168 seconds. TIME= 5 MASS = 5.886316959e+10 RHO THETA = 1.820642548e+13 RHO SCALAR = 0 RHO QTOTAL = 1177220750 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8821091847 (terrain aware) 0.8821091847 (terrain unaware) Anelastic dt at level 0 would be: 361.1405891 (terrain aware) 361.1405891 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 11] ADVANCE from elapsed time = 5 to 5.5 with dt = 0.5 Making slow rhs at time 5 for fast variables advancing from 5 to 5.166666666667 Fast time integration at level 0 from 5 to 5.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5 to 5.166666666667 with dt = 0.1666666666667 using RHS created at 5 Making slow rhs at time 5.166666666667 for fast variables advancing from 5 to 5.25 Fast time integration at level 0 from 5 to 5.125 with dt = 0.125 Fast time integration at level 0 from 5.125 to 5.25 with dt = 0.125 Time integration of scalars at level 0 from 5 to 5.25 with dt = 0.25 using RHS created at 5.166666666667 Making slow rhs at time 5.25 for fast variables advancing from 5 to 5.5 Fast time integration at level 0 from 5 to 5.125 with dt = 0.125 Fast time integration at level 0 from 5.125 to 5.25 with dt = 0.125 Fast time integration at level 0 from 5.25 to 5.375 with dt = 0.125 Fast time integration at level 0 from 5.375 to 5.5 with dt = 0.125 Time integration of scalars at level 0 from 5 to 5.5 with dt = 0.5 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 80000 cells Cloud fraction 5 1 Coarse STEP 11 ends. TIME = 5.5 DT = 0.5 Timestep time = 0.425934141 seconds. TIME= 5.5 MASS = 5.886316959e+10 RHO THETA = 1.820687283e+13 RHO SCALAR = 0 RHO QTOTAL = 1177216462 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8820447621 (terrain aware) 0.8820447621 (terrain unaware) Anelastic dt at level 0 would be: 358.5235424 (terrain aware) 358.5235424 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 12] ADVANCE from elapsed time = 5.5 to 6 with dt = 0.5 Making slow rhs at time 5.5 for fast variables advancing from 5.5 to 5.666666666667 Fast time integration at level 0 from 5.5 to 5.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5.5 to 5.666666666667 with dt = 0.1666666666667 using RHS created at 5.5 Making slow rhs at time 5.666666666667 for fast variables advancing from 5.5 to 5.75 Fast time integration at level 0 from 5.5 to 5.625 with dt = 0.125 Fast time integration at level 0 from 5.625 to 5.75 with dt = 0.125 Time integration of scalars at level 0 from 5.5 to 5.75 with dt = 0.25 using RHS created at 5.666666666667 Making slow rhs at time 5.75 for fast variables advancing from 5.5 to 6 Fast time integration at level 0 from 5.5 to 5.625 with dt = 0.125 Fast time integration at level 0 from 5.625 to 5.75 with dt = 0.125 Fast time integration at level 0 from 5.75 to 5.875 with dt = 0.125 Fast time integration at level 0 from 5.875 to 6 with dt = 0.125 Time integration of scalars at level 0 from 5.5 to 6 with dt = 0.5 using RHS created at 5.75 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 80000 cells Cloud fraction 5.5 1 Coarse STEP 12 ends. TIME = 6 DT = 0.5 Timestep time = 0.426037978 seconds. TIME= 6 MASS = 5.886316959e+10 RHO THETA = 1.820730685e+13 RHO SCALAR = 0 RHO QTOTAL = 1177212172 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8819965427 (terrain aware) 0.8819965427 (terrain unaware) Anelastic dt at level 0 would be: 306.3895387 (terrain aware) 306.3895387 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 13] ADVANCE from elapsed time = 6 to 6.5 with dt = 0.5 Making slow rhs at time 6 for fast variables advancing from 6 to 6.166666666667 Fast time integration at level 0 from 6 to 6.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6 to 6.166666666667 with dt = 0.1666666666667 using RHS created at 6 Making slow rhs at time 6.166666666667 for fast variables advancing from 6 to 6.25 Fast time integration at level 0 from 6 to 6.125 with dt = 0.125 Fast time integration at level 0 from 6.125 to 6.25 with dt = 0.125 Time integration of scalars at level 0 from 6 to 6.25 with dt = 0.25 using RHS created at 6.166666666667 Making slow rhs at time 6.25 for fast variables advancing from 6 to 6.5 Fast time integration at level 0 from 6 to 6.125 with dt = 0.125 Fast time integration at level 0 from 6.125 to 6.25 with dt = 0.125 Fast time integration at level 0 from 6.25 to 6.375 with dt = 0.125 Fast time integration at level 0 from 6.375 to 6.5 with dt = 0.125 Time integration of scalars at level 0 from 6 to 6.5 with dt = 0.5 using RHS created at 6.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 80000 cells Cloud fraction 6 1 Coarse STEP 13 ends. TIME = 6.5 DT = 0.5 Timestep time = 0.426456135 seconds. TIME= 6.5 MASS = 5.886316959e+10 RHO THETA = 1.820772751e+13 RHO SCALAR = 0 RHO QTOTAL = 1177207880 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8819617406 (terrain aware) 0.8819617406 (terrain unaware) Anelastic dt at level 0 would be: 273.097521 (terrain aware) 273.097521 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 14] ADVANCE from elapsed time = 6.5 to 7 with dt = 0.5 Making slow rhs at time 6.5 for fast variables advancing from 6.5 to 6.666666666667 Fast time integration at level 0 from 6.5 to 6.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6.5 to 6.666666666667 with dt = 0.1666666666667 using RHS created at 6.5 Making slow rhs at time 6.666666666667 for fast variables advancing from 6.5 to 6.75 Fast time integration at level 0 from 6.5 to 6.625 with dt = 0.125 Fast time integration at level 0 from 6.625 to 6.75 with dt = 0.125 Time integration of scalars at level 0 from 6.5 to 6.75 with dt = 0.25 using RHS created at 6.666666666667 Making slow rhs at time 6.75 for fast variables advancing from 6.5 to 7 Fast time integration at level 0 from 6.5 to 6.625 with dt = 0.125 Fast time integration at level 0 from 6.625 to 6.75 with dt = 0.125 Fast time integration at level 0 from 6.75 to 6.875 with dt = 0.125 Fast time integration at level 0 from 6.875 to 7 with dt = 0.125 Time integration of scalars at level 0 from 6.5 to 7 with dt = 0.5 using RHS created at 6.75 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 80000 cells Cloud fraction 6.5 1 Coarse STEP 14 ends. TIME = 7 DT = 0.5 Timestep time = 0.426703286 seconds. TIME= 7 MASS = 5.886316959e+10 RHO THETA = 1.820813568e+13 RHO SCALAR = 0 RHO QTOTAL = 1177203586 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8819340732 (terrain aware) 0.8819340732 (terrain unaware) Anelastic dt at level 0 would be: 253.2691262 (terrain aware) 253.2691262 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 15] ADVANCE from elapsed time = 7 to 7.5 with dt = 0.5 Making slow rhs at time 7 for fast variables advancing from 7 to 7.166666666667 Fast time integration at level 0 from 7 to 7.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7 to 7.166666666667 with dt = 0.1666666666667 using RHS created at 7 Making slow rhs at time 7.166666666667 for fast variables advancing from 7 to 7.25 Fast time integration at level 0 from 7 to 7.125 with dt = 0.125 Fast time integration at level 0 from 7.125 to 7.25 with dt = 0.125 Time integration of scalars at level 0 from 7 to 7.25 with dt = 0.25 using RHS created at 7.166666666667 Making slow rhs at time 7.25 for fast variables advancing from 7 to 7.5 Fast time integration at level 0 from 7 to 7.125 with dt = 0.125 Fast time integration at level 0 from 7.125 to 7.25 with dt = 0.125 Fast time integration at level 0 from 7.25 to 7.375 with dt = 0.125 Fast time integration at level 0 from 7.375 to 7.5 with dt = 0.125 Time integration of scalars at level 0 from 7 to 7.5 with dt = 0.5 using RHS created at 7.25 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 80000 cells Cloud fraction 7 1 Coarse STEP 15 ends. TIME = 7.5 DT = 0.5 Timestep time = 0.426192575 seconds. TIME= 7.5 MASS = 5.886316959e+10 RHO THETA = 1.82085321e+13 RHO SCALAR = 0 RHO QTOTAL = 1177199288 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8819140414 (terrain aware) 0.8819140414 (terrain unaware) Anelastic dt at level 0 would be: 242.3105368 (terrain aware) 242.3105368 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 16] ADVANCE from elapsed time = 7.5 to 8 with dt = 0.5 Making slow rhs at time 7.5 for fast variables advancing from 7.5 to 7.666666666667 Fast time integration at level 0 from 7.5 to 7.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7.5 to 7.666666666667 with dt = 0.1666666666667 using RHS created at 7.5 Making slow rhs at time 7.666666666667 for fast variables advancing from 7.5 to 7.75 Fast time integration at level 0 from 7.5 to 7.625 with dt = 0.125 Fast time integration at level 0 from 7.625 to 7.75 with dt = 0.125 Time integration of scalars at level 0 from 7.5 to 7.75 with dt = 0.25 using RHS created at 7.666666666667 Making slow rhs at time 7.75 for fast variables advancing from 7.5 to 8 Fast time integration at level 0 from 7.5 to 7.625 with dt = 0.125 Fast time integration at level 0 from 7.625 to 7.75 with dt = 0.125 Fast time integration at level 0 from 7.75 to 7.875 with dt = 0.125 Fast time integration at level 0 from 7.875 to 8 with dt = 0.125 Time integration of scalars at level 0 from 7.5 to 8 with dt = 0.5 using RHS created at 7.75 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 80000 cells Cloud fraction 7.5 1 Coarse STEP 16 ends. TIME = 8 DT = 0.5 Timestep time = 0.427244913 seconds. TIME= 8 MASS = 5.886316959e+10 RHO THETA = 1.820891674e+13 RHO SCALAR = 0 RHO QTOTAL = 1177194988 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8819014438 (terrain aware) 0.8819014438 (terrain unaware) Anelastic dt at level 0 would be: 237.483976 (terrain aware) 237.483976 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 17] ADVANCE from elapsed time = 8 to 8.5 with dt = 0.5 Making slow rhs at time 8 for fast variables advancing from 8 to 8.166666666667 Fast time integration at level 0 from 8 to 8.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8 to 8.166666666667 with dt = 0.1666666666667 using RHS created at 8 Making slow rhs at time 8.166666666667 for fast variables advancing from 8 to 8.25 Fast time integration at level 0 from 8 to 8.125 with dt = 0.125 Fast time integration at level 0 from 8.125 to 8.25 with dt = 0.125 Time integration of scalars at level 0 from 8 to 8.25 with dt = 0.25 using RHS created at 8.166666666667 Making slow rhs at time 8.25 for fast variables advancing from 8 to 8.5 Fast time integration at level 0 from 8 to 8.125 with dt = 0.125 Fast time integration at level 0 from 8.125 to 8.25 with dt = 0.125 Fast time integration at level 0 from 8.25 to 8.375 with dt = 0.125 Fast time integration at level 0 from 8.375 to 8.5 with dt = 0.125 Time integration of scalars at level 0 from 8 to 8.5 with dt = 0.5 using RHS created at 8.25 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 80000 cells Cloud fraction 8 1 Coarse STEP 17 ends. TIME = 8.5 DT = 0.5 Timestep time = 0.427070141 seconds. TIME= 8.5 MASS = 5.886316959e+10 RHO THETA = 1.820928976e+13 RHO SCALAR = 0 RHO QTOTAL = 1177190686 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8818952076 (terrain aware) 0.8818952076 (terrain unaware) Anelastic dt at level 0 would be: 234.7297532 (terrain aware) 234.7297532 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 18] ADVANCE from elapsed time = 8.5 to 9 with dt = 0.5 Making slow rhs at time 8.5 for fast variables advancing from 8.5 to 8.666666666667 Fast time integration at level 0 from 8.5 to 8.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8.5 to 8.666666666667 with dt = 0.1666666666667 using RHS created at 8.5 Making slow rhs at time 8.666666666667 for fast variables advancing from 8.5 to 8.75 Fast time integration at level 0 from 8.5 to 8.625 with dt = 0.125 Fast time integration at level 0 from 8.625 to 8.75 with dt = 0.125 Time integration of scalars at level 0 from 8.5 to 8.75 with dt = 0.25 using RHS created at 8.666666666667 Making slow rhs at time 8.75 for fast variables advancing from 8.5 to 9 Fast time integration at level 0 from 8.5 to 8.625 with dt = 0.125 Fast time integration at level 0 from 8.625 to 8.75 with dt = 0.125 Fast time integration at level 0 from 8.75 to 8.875 with dt = 0.125 Fast time integration at level 0 from 8.875 to 9 with dt = 0.125 Time integration of scalars at level 0 from 8.5 to 9 with dt = 0.5 using RHS created at 8.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 80000 cells Cloud fraction 8.5 1 Coarse STEP 18 ends. TIME = 9 DT = 0.5 Timestep time = 0.427583131 seconds. TIME= 9 MASS = 5.886316959e+10 RHO THETA = 1.820965205e+13 RHO SCALAR = 0 RHO QTOTAL = 1177186380 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8818893844 (terrain aware) 0.8818893844 (terrain unaware) Anelastic dt at level 0 would be: 230.3769771 (terrain aware) 230.3769771 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 19] ADVANCE from elapsed time = 9 to 9.5 with dt = 0.5 Making slow rhs at time 9 for fast variables advancing from 9 to 9.166666666667 Fast time integration at level 0 from 9 to 9.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9 to 9.166666666667 with dt = 0.1666666666667 using RHS created at 9 Making slow rhs at time 9.166666666667 for fast variables advancing from 9 to 9.25 Fast time integration at level 0 from 9 to 9.125 with dt = 0.125 Fast time integration at level 0 from 9.125 to 9.25 with dt = 0.125 Time integration of scalars at level 0 from 9 to 9.25 with dt = 0.25 using RHS created at 9.166666666667 Making slow rhs at time 9.25 for fast variables advancing from 9 to 9.5 Fast time integration at level 0 from 9 to 9.125 with dt = 0.125 Fast time integration at level 0 from 9.125 to 9.25 with dt = 0.125 Fast time integration at level 0 from 9.25 to 9.375 with dt = 0.125 Fast time integration at level 0 from 9.375 to 9.5 with dt = 0.125 Time integration of scalars at level 0 from 9 to 9.5 with dt = 0.5 using RHS created at 9.25 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 80000 cells Cloud fraction 9 1 Coarse STEP 19 ends. TIME = 9.5 DT = 0.5 Timestep time = 0.426618879 seconds. TIME= 9.5 MASS = 5.886316959e+10 RHO THETA = 1.821000474e+13 RHO SCALAR = 0 RHO QTOTAL = 1177182069 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8818520725 (terrain aware) 0.8818520725 (terrain unaware) Anelastic dt at level 0 would be: 226.7292945 (terrain aware) 226.7292945 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 20] ADVANCE from elapsed time = 9.5 to 10 with dt = 0.5 Making slow rhs at time 9.5 for fast variables advancing from 9.5 to 9.666666666667 Fast time integration at level 0 from 9.5 to 9.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9.5 to 9.666666666667 with dt = 0.1666666666667 using RHS created at 9.5 Making slow rhs at time 9.666666666667 for fast variables advancing from 9.5 to 9.75 Fast time integration at level 0 from 9.5 to 9.625 with dt = 0.125 Fast time integration at level 0 from 9.625 to 9.75 with dt = 0.125 Time integration of scalars at level 0 from 9.5 to 9.75 with dt = 0.25 using RHS created at 9.666666666667 Making slow rhs at time 9.75 for fast variables advancing from 9.5 to 10 Fast time integration at level 0 from 9.5 to 9.625 with dt = 0.125 Fast time integration at level 0 from 9.625 to 9.75 with dt = 0.125 Fast time integration at level 0 from 9.75 to 9.875 with dt = 0.125 Fast time integration at level 0 from 9.875 to 10 with dt = 0.125 Time integration of scalars at level 0 from 9.5 to 10 with dt = 0.5 using RHS created at 9.75 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 80000 cells Cloud fraction 9.5 1 Coarse STEP 20 ends. TIME = 10 DT = 0.5 Timestep time = 0.427463369 seconds. TIME= 10 MASS = 5.886316959e+10 RHO THETA = 1.821034837e+13 RHO SCALAR = 0 RHO QTOTAL = 1177177750 Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8816832062 (terrain aware) 0.8816832062 (terrain unaware) Anelastic dt at level 0 would be: 224.8371002 (terrain aware) 224.8371002 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 21] ADVANCE from elapsed time = 10 to 10.5 with dt = 0.5 Making slow rhs at time 10 for fast variables advancing from 10 to 10.16666666667 Fast time integration at level 0 from 10 to 10.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10 to 10.16666666667 with dt = 0.1666666666667 using RHS created at 10 Making slow rhs at time 10.16666666667 for fast variables advancing from 10 to 10.25 Fast time integration at level 0 from 10 to 10.125 with dt = 0.125 Fast time integration at level 0 from 10.125 to 10.25 with dt = 0.125 Time integration of scalars at level 0 from 10 to 10.25 with dt = 0.25 using RHS created at 10.16666666667 Making slow rhs at time 10.25 for fast variables advancing from 10 to 10.5 Fast time integration at level 0 from 10 to 10.125 with dt = 0.125 Fast time integration at level 0 from 10.125 to 10.25 with dt = 0.125 Fast time integration at level 0 from 10.25 to 10.375 with dt = 0.125 Fast time integration at level 0 from 10.375 to 10.5 with dt = 0.125 Time integration of scalars at level 0 from 10 to 10.5 with dt = 0.5 using RHS created at 10.25 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 80000 cells Cloud fraction 10 1 Coarse STEP 21 ends. TIME = 10.5 DT = 0.5 Timestep time = 0.426866463 seconds. TIME= 10.5 MASS = 5.886316959e+10 RHO THETA = 1.821068338e+13 RHO SCALAR = 0 RHO QTOTAL = 1177173427 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8815391925 (terrain aware) 0.8815391925 (terrain unaware) Anelastic dt at level 0 would be: 224.1120481 (terrain aware) 224.1120481 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 22] ADVANCE from elapsed time = 10.5 to 11 with dt = 0.5 Making slow rhs at time 10.5 for fast variables advancing from 10.5 to 10.66666666667 Fast time integration at level 0 from 10.5 to 10.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10.5 to 10.66666666667 with dt = 0.1666666666667 using RHS created at 10.5 Making slow rhs at time 10.66666666667 for fast variables advancing from 10.5 to 10.75 Fast time integration at level 0 from 10.5 to 10.625 with dt = 0.125 Fast time integration at level 0 from 10.625 to 10.75 with dt = 0.125 Time integration of scalars at level 0 from 10.5 to 10.75 with dt = 0.25 using RHS created at 10.66666666667 Making slow rhs at time 10.75 for fast variables advancing from 10.5 to 11 Fast time integration at level 0 from 10.5 to 10.625 with dt = 0.125 Fast time integration at level 0 from 10.625 to 10.75 with dt = 0.125 Fast time integration at level 0 from 10.75 to 10.875 with dt = 0.125 Fast time integration at level 0 from 10.875 to 11 with dt = 0.125 Time integration of scalars at level 0 from 10.5 to 11 with dt = 0.5 using RHS created at 10.75 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 80000 cells Cloud fraction 10.5 1 Coarse STEP 22 ends. TIME = 11 DT = 0.5 Timestep time = 0.427198026 seconds. TIME= 11 MASS = 5.886316959e+10 RHO THETA = 1.821101023e+13 RHO SCALAR = 0 RHO QTOTAL = 1177169101 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8814190313 (terrain aware) 0.8814190313 (terrain unaware) Anelastic dt at level 0 would be: 224.7324326 (terrain aware) 224.7324326 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 23] ADVANCE from elapsed time = 11 to 11.5 with dt = 0.5 Making slow rhs at time 11 for fast variables advancing from 11 to 11.16666666667 Fast time integration at level 0 from 11 to 11.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11 to 11.16666666667 with dt = 0.1666666666667 using RHS created at 11 Making slow rhs at time 11.16666666667 for fast variables advancing from 11 to 11.25 Fast time integration at level 0 from 11 to 11.125 with dt = 0.125 Fast time integration at level 0 from 11.125 to 11.25 with dt = 0.125 Time integration of scalars at level 0 from 11 to 11.25 with dt = 0.25 using RHS created at 11.16666666667 Making slow rhs at time 11.25 for fast variables advancing from 11 to 11.5 Fast time integration at level 0 from 11 to 11.125 with dt = 0.125 Fast time integration at level 0 from 11.125 to 11.25 with dt = 0.125 Fast time integration at level 0 from 11.25 to 11.375 with dt = 0.125 Fast time integration at level 0 from 11.375 to 11.5 with dt = 0.125 Time integration of scalars at level 0 from 11 to 11.5 with dt = 0.5 using RHS created at 11.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 80000 cells Cloud fraction 11 1 Coarse STEP 23 ends. TIME = 11.5 DT = 0.5 Timestep time = 0.426751706 seconds. TIME= 11.5 MASS = 5.886316959e+10 RHO THETA = 1.821132939e+13 RHO SCALAR = 0 RHO QTOTAL = 1177164773 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8813303342 (terrain aware) 0.8813303342 (terrain unaware) Anelastic dt at level 0 would be: 226.7395945 (terrain aware) 226.7395945 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 24] ADVANCE from elapsed time = 11.5 to 12 with dt = 0.5 Making slow rhs at time 11.5 for fast variables advancing from 11.5 to 11.66666666667 Fast time integration at level 0 from 11.5 to 11.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11.5 to 11.66666666667 with dt = 0.1666666666667 using RHS created at 11.5 Making slow rhs at time 11.66666666667 for fast variables advancing from 11.5 to 11.75 Fast time integration at level 0 from 11.5 to 11.625 with dt = 0.125 Fast time integration at level 0 from 11.625 to 11.75 with dt = 0.125 Time integration of scalars at level 0 from 11.5 to 11.75 with dt = 0.25 using RHS created at 11.66666666667 Making slow rhs at time 11.75 for fast variables advancing from 11.5 to 12 Fast time integration at level 0 from 11.5 to 11.625 with dt = 0.125 Fast time integration at level 0 from 11.625 to 11.75 with dt = 0.125 Fast time integration at level 0 from 11.75 to 11.875 with dt = 0.125 Fast time integration at level 0 from 11.875 to 12 with dt = 0.125 Time integration of scalars at level 0 from 11.5 to 12 with dt = 0.5 using RHS created at 11.75 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 80000 cells Cloud fraction 11.5 1 Coarse STEP 24 ends. TIME = 12 DT = 0.5 Timestep time = 0.425985885 seconds. TIME= 12 MASS = 5.886316959e+10 RHO THETA = 1.821164127e+13 RHO SCALAR = 0 RHO QTOTAL = 1177160443 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8812680796 (terrain aware) 0.8812680796 (terrain unaware) Anelastic dt at level 0 would be: 229.8143993 (terrain aware) 229.8143993 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 25] ADVANCE from elapsed time = 12 to 12.5 with dt = 0.5 Making slow rhs at time 12 for fast variables advancing from 12 to 12.16666666667 Fast time integration at level 0 from 12 to 12.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12 to 12.16666666667 with dt = 0.1666666666667 using RHS created at 12 Making slow rhs at time 12.16666666667 for fast variables advancing from 12 to 12.25 Fast time integration at level 0 from 12 to 12.125 with dt = 0.125 Fast time integration at level 0 from 12.125 to 12.25 with dt = 0.125 Time integration of scalars at level 0 from 12 to 12.25 with dt = 0.25 using RHS created at 12.16666666667 Making slow rhs at time 12.25 for fast variables advancing from 12 to 12.5 Fast time integration at level 0 from 12 to 12.125 with dt = 0.125 Fast time integration at level 0 from 12.125 to 12.25 with dt = 0.125 Fast time integration at level 0 from 12.25 to 12.375 with dt = 0.125 Fast time integration at level 0 from 12.375 to 12.5 with dt = 0.125 Time integration of scalars at level 0 from 12 to 12.5 with dt = 0.5 using RHS created at 12.25 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 80000 cells Cloud fraction 12 1 Coarse STEP 25 ends. TIME = 12.5 DT = 0.5 Timestep time = 0.427302111 seconds. TIME= 12.5 MASS = 5.886316959e+10 RHO THETA = 1.821194628e+13 RHO SCALAR = 0 RHO QTOTAL = 1177156112 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8812303001 (terrain aware) 0.8812303001 (terrain unaware) Anelastic dt at level 0 would be: 232.8168693 (terrain aware) 232.8168693 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666666667 Fast time integration at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 using RHS created at 12.5 Making slow rhs at time 12.66666666667 for fast variables advancing from 12.5 to 12.75 Fast time integration at level 0 from 12.5 to 12.625 with dt = 0.125 Fast time integration at level 0 from 12.625 to 12.75 with dt = 0.125 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666666667 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 Fast time integration at level 0 from 12.5 to 12.625 with dt = 0.125 Fast time integration at level 0 from 12.625 to 12.75 with dt = 0.125 Fast time integration at level 0 from 12.75 to 12.875 with dt = 0.125 Fast time integration at level 0 from 12.875 to 13 with dt = 0.125 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 80000 cells Cloud fraction 12.5 1 Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.426165953 seconds. TIME= 13 MASS = 5.886316959e+10 RHO THETA = 1.821224478e+13 RHO SCALAR = 0 RHO QTOTAL = 1177151780 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.881211519 (terrain aware) 0.881211519 (terrain unaware) Anelastic dt at level 0 would be: 235.7900726 (terrain aware) 235.7900726 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666666667 Fast time integration at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 using RHS created at 13 Making slow rhs at time 13.16666666667 for fast variables advancing from 13 to 13.25 Fast time integration at level 0 from 13 to 13.125 with dt = 0.125 Fast time integration at level 0 from 13.125 to 13.25 with dt = 0.125 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666666667 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 Fast time integration at level 0 from 13 to 13.125 with dt = 0.125 Fast time integration at level 0 from 13.125 to 13.25 with dt = 0.125 Fast time integration at level 0 from 13.25 to 13.375 with dt = 0.125 Fast time integration at level 0 from 13.375 to 13.5 with dt = 0.125 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 80000 cells Cloud fraction 13 1 Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.426812462 seconds. TIME= 13.5 MASS = 5.886316959e+10 RHO THETA = 1.821253728e+13 RHO SCALAR = 0 RHO QTOTAL = 1177147447 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8812042155 (terrain aware) 0.8812042155 (terrain unaware) Anelastic dt at level 0 would be: 238.4385404 (terrain aware) 238.4385404 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666666667 Fast time integration at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 using RHS created at 13.5 Making slow rhs at time 13.66666666667 for fast variables advancing from 13.5 to 13.75 Fast time integration at level 0 from 13.5 to 13.625 with dt = 0.125 Fast time integration at level 0 from 13.625 to 13.75 with dt = 0.125 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666666667 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 Fast time integration at level 0 from 13.5 to 13.625 with dt = 0.125 Fast time integration at level 0 from 13.625 to 13.75 with dt = 0.125 Fast time integration at level 0 from 13.75 to 13.875 with dt = 0.125 Fast time integration at level 0 from 13.875 to 14 with dt = 0.125 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 80000 cells Cloud fraction 13.5 1 Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.42582386 seconds. TIME= 14 MASS = 5.886316959e+10 RHO THETA = 1.821283182e+13 RHO SCALAR = 0 RHO QTOTAL = 1177143112 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8811957224 (terrain aware) 0.8811957224 (terrain unaware) Anelastic dt at level 0 would be: 240.8479838 (terrain aware) 240.8479838 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666666667 Fast time integration at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 using RHS created at 14 Making slow rhs at time 14.16666666667 for fast variables advancing from 14 to 14.25 Fast time integration at level 0 from 14 to 14.125 with dt = 0.125 Fast time integration at level 0 from 14.125 to 14.25 with dt = 0.125 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666666667 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 Fast time integration at level 0 from 14 to 14.125 with dt = 0.125 Fast time integration at level 0 from 14.125 to 14.25 with dt = 0.125 Fast time integration at level 0 from 14.25 to 14.375 with dt = 0.125 Fast time integration at level 0 from 14.375 to 14.5 with dt = 0.125 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 80000 cells Cloud fraction 14 1 Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.425884263 seconds. TIME= 14.5 MASS = 5.886316959e+10 RHO THETA = 1.821312352e+13 RHO SCALAR = 0 RHO QTOTAL = 1177138776 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.881174319 (terrain aware) 0.881174319 (terrain unaware) Anelastic dt at level 0 would be: 243.7680775 (terrain aware) 243.7680775 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666666667 Fast time integration at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 using RHS created at 14.5 Making slow rhs at time 14.66666666667 for fast variables advancing from 14.5 to 14.75 Fast time integration at level 0 from 14.5 to 14.625 with dt = 0.125 Fast time integration at level 0 from 14.625 to 14.75 with dt = 0.125 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666666667 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 Fast time integration at level 0 from 14.5 to 14.625 with dt = 0.125 Fast time integration at level 0 from 14.625 to 14.75 with dt = 0.125 Fast time integration at level 0 from 14.75 to 14.875 with dt = 0.125 Fast time integration at level 0 from 14.875 to 15 with dt = 0.125 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 80000 cells Cloud fraction 14.5 1 Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.426031567 seconds. TIME= 15 MASS = 5.886316959e+10 RHO THETA = 1.82134093e+13 RHO SCALAR = 0 RHO QTOTAL = 1177134438 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.881142137 (terrain aware) 0.881142137 (terrain unaware) Anelastic dt at level 0 would be: 246.493959 (terrain aware) 246.493959 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666666667 Fast time integration at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 using RHS created at 15 Making slow rhs at time 15.16666666667 for fast variables advancing from 15 to 15.25 Fast time integration at level 0 from 15 to 15.125 with dt = 0.125 Fast time integration at level 0 from 15.125 to 15.25 with dt = 0.125 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666666667 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 Fast time integration at level 0 from 15 to 15.125 with dt = 0.125 Fast time integration at level 0 from 15.125 to 15.25 with dt = 0.125 Fast time integration at level 0 from 15.25 to 15.375 with dt = 0.125 Fast time integration at level 0 from 15.375 to 15.5 with dt = 0.125 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 80000 cells Cloud fraction 15 1 Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.425649373 seconds. TIME= 15.5 MASS = 5.886316959e+10 RHO THETA = 1.821368939e+13 RHO SCALAR = 0 RHO QTOTAL = 1177130097 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8810976197 (terrain aware) 0.8810976197 (terrain unaware) Anelastic dt at level 0 would be: 247.2264657 (terrain aware) 247.2264657 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666666667 Fast time integration at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 using RHS created at 15.5 Making slow rhs at time 15.66666666667 for fast variables advancing from 15.5 to 15.75 Fast time integration at level 0 from 15.5 to 15.625 with dt = 0.125 Fast time integration at level 0 from 15.625 to 15.75 with dt = 0.125 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666666667 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 Fast time integration at level 0 from 15.5 to 15.625 with dt = 0.125 Fast time integration at level 0 from 15.625 to 15.75 with dt = 0.125 Fast time integration at level 0 from 15.75 to 15.875 with dt = 0.125 Fast time integration at level 0 from 15.875 to 16 with dt = 0.125 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 80000 cells Cloud fraction 15.5 1 Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.42658749 seconds. TIME= 16 MASS = 5.886316959e+10 RHO THETA = 1.821396395e+13 RHO SCALAR = 0 RHO QTOTAL = 1177125753 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8810485598 (terrain aware) 0.8810485598 (terrain unaware) Anelastic dt at level 0 would be: 244.2347616 (terrain aware) 244.2347616 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666666667 Fast time integration at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 using RHS created at 16 Making slow rhs at time 16.16666666667 for fast variables advancing from 16 to 16.25 Fast time integration at level 0 from 16 to 16.125 with dt = 0.125 Fast time integration at level 0 from 16.125 to 16.25 with dt = 0.125 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666666667 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 Fast time integration at level 0 from 16 to 16.125 with dt = 0.125 Fast time integration at level 0 from 16.125 to 16.25 with dt = 0.125 Fast time integration at level 0 from 16.25 to 16.375 with dt = 0.125 Fast time integration at level 0 from 16.375 to 16.5 with dt = 0.125 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 80000 cells Cloud fraction 16 1 Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.425772362 seconds. TIME= 16.5 MASS = 5.886316959e+10 RHO THETA = 1.82142332e+13 RHO SCALAR = 0 RHO QTOTAL = 1177121407 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8809967442 (terrain aware) 0.8809967442 (terrain unaware) Anelastic dt at level 0 would be: 235.5620752 (terrain aware) 235.5620752 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666666667 Fast time integration at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 using RHS created at 16.5 Making slow rhs at time 16.66666666667 for fast variables advancing from 16.5 to 16.75 Fast time integration at level 0 from 16.5 to 16.625 with dt = 0.125 Fast time integration at level 0 from 16.625 to 16.75 with dt = 0.125 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666666667 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 Fast time integration at level 0 from 16.5 to 16.625 with dt = 0.125 Fast time integration at level 0 from 16.625 to 16.75 with dt = 0.125 Fast time integration at level 0 from 16.75 to 16.875 with dt = 0.125 Fast time integration at level 0 from 16.875 to 17 with dt = 0.125 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 80000 cells Cloud fraction 16.5 1 Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.425455546 seconds. TIME= 17 MASS = 5.886316959e+10 RHO THETA = 1.821449734e+13 RHO SCALAR = 0 RHO QTOTAL = 1177117057 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8809430694 (terrain aware) 0.8809430694 (terrain unaware) Anelastic dt at level 0 would be: 225.9076296 (terrain aware) 225.9076296 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666666667 Fast time integration at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 using RHS created at 17 Making slow rhs at time 17.16666666667 for fast variables advancing from 17 to 17.25 Fast time integration at level 0 from 17 to 17.125 with dt = 0.125 Fast time integration at level 0 from 17.125 to 17.25 with dt = 0.125 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666666667 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 Fast time integration at level 0 from 17 to 17.125 with dt = 0.125 Fast time integration at level 0 from 17.125 to 17.25 with dt = 0.125 Fast time integration at level 0 from 17.25 to 17.375 with dt = 0.125 Fast time integration at level 0 from 17.375 to 17.5 with dt = 0.125 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 80000 cells Cloud fraction 17 1 Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.425628183 seconds. TIME= 17.5 MASS = 5.886316959e+10 RHO THETA = 1.821475665e+13 RHO SCALAR = 0 RHO QTOTAL = 1177112705 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8808880186 (terrain aware) 0.8808880186 (terrain unaware) Anelastic dt at level 0 would be: 218.0399856 (terrain aware) 218.0399856 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666666667 Fast time integration at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 using RHS created at 17.5 Making slow rhs at time 17.66666666667 for fast variables advancing from 17.5 to 17.75 Fast time integration at level 0 from 17.5 to 17.625 with dt = 0.125 Fast time integration at level 0 from 17.625 to 17.75 with dt = 0.125 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666666667 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 Fast time integration at level 0 from 17.5 to 17.625 with dt = 0.125 Fast time integration at level 0 from 17.625 to 17.75 with dt = 0.125 Fast time integration at level 0 from 17.75 to 17.875 with dt = 0.125 Fast time integration at level 0 from 17.875 to 18 with dt = 0.125 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 80000 cells Cloud fraction 17.5 1 Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.42538158 seconds. TIME= 18 MASS = 5.886316959e+10 RHO THETA = 1.821501141e+13 RHO SCALAR = 0 RHO QTOTAL = 1177108350 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8808319568 (terrain aware) 0.8808319568 (terrain unaware) Anelastic dt at level 0 would be: 207.4857538 (terrain aware) 207.4857538 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666666667 Fast time integration at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 using RHS created at 18 Making slow rhs at time 18.16666666667 for fast variables advancing from 18 to 18.25 Fast time integration at level 0 from 18 to 18.125 with dt = 0.125 Fast time integration at level 0 from 18.125 to 18.25 with dt = 0.125 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666666667 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 Fast time integration at level 0 from 18 to 18.125 with dt = 0.125 Fast time integration at level 0 from 18.125 to 18.25 with dt = 0.125 Fast time integration at level 0 from 18.25 to 18.375 with dt = 0.125 Fast time integration at level 0 from 18.375 to 18.5 with dt = 0.125 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 80000 cells Cloud fraction 18 1 Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.426204292 seconds. TIME= 18.5 MASS = 5.886316959e+10 RHO THETA = 1.821526194e+13 RHO SCALAR = 0 RHO QTOTAL = 1177103993 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8807751904 (terrain aware) 0.8807751904 (terrain unaware) Anelastic dt at level 0 would be: 197.2704962 (terrain aware) 197.2704962 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666666667 Fast time integration at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 using RHS created at 18.5 Making slow rhs at time 18.66666666667 for fast variables advancing from 18.5 to 18.75 Fast time integration at level 0 from 18.5 to 18.625 with dt = 0.125 Fast time integration at level 0 from 18.625 to 18.75 with dt = 0.125 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666666667 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 Fast time integration at level 0 from 18.5 to 18.625 with dt = 0.125 Fast time integration at level 0 from 18.625 to 18.75 with dt = 0.125 Fast time integration at level 0 from 18.75 to 18.875 with dt = 0.125 Fast time integration at level 0 from 18.875 to 19 with dt = 0.125 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 80000 cells Cloud fraction 18.5 1 Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.425262019 seconds. TIME= 19 MASS = 5.886316959e+10 RHO THETA = 1.821550848e+13 RHO SCALAR = 0 RHO QTOTAL = 1177099633 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8807180123 (terrain aware) 0.8807180123 (terrain unaware) Anelastic dt at level 0 would be: 187.6586035 (terrain aware) 187.6586035 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666666667 Fast time integration at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 using RHS created at 19 Making slow rhs at time 19.16666666667 for fast variables advancing from 19 to 19.25 Fast time integration at level 0 from 19 to 19.125 with dt = 0.125 Fast time integration at level 0 from 19.125 to 19.25 with dt = 0.125 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666666667 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 Fast time integration at level 0 from 19 to 19.125 with dt = 0.125 Fast time integration at level 0 from 19.125 to 19.25 with dt = 0.125 Fast time integration at level 0 from 19.25 to 19.375 with dt = 0.125 Fast time integration at level 0 from 19.375 to 19.5 with dt = 0.125 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 80000 cells Cloud fraction 19 1 Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.425440045 seconds. TIME= 19.5 MASS = 5.886316959e+10 RHO THETA = 1.82157513e+13 RHO SCALAR = 0 RHO QTOTAL = 1177095270 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8806606774 (terrain aware) 0.8806606774 (terrain unaware) Anelastic dt at level 0 would be: 178.7938157 (terrain aware) 178.7938157 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666666667 Fast time integration at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 using RHS created at 19.5 Making slow rhs at time 19.66666666667 for fast variables advancing from 19.5 to 19.75 Fast time integration at level 0 from 19.5 to 19.625 with dt = 0.125 Fast time integration at level 0 from 19.625 to 19.75 with dt = 0.125 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666666667 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 Fast time integration at level 0 from 19.5 to 19.625 with dt = 0.125 Fast time integration at level 0 from 19.625 to 19.75 with dt = 0.125 Fast time integration at level 0 from 19.75 to 19.875 with dt = 0.125 Fast time integration at level 0 from 19.875 to 20 with dt = 0.125 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 80000 cells Cloud fraction 19.5 1 Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.425152706 seconds. TIME= 20 MASS = 5.886316959e+10 RHO THETA = 1.821599057e+13 RHO SCALAR = 0 RHO QTOTAL = 1177090904 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8806033941 (terrain aware) 0.8806033941 (terrain unaware) Anelastic dt at level 0 would be: 170.6597876 (terrain aware) 170.6597876 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666666667 Fast time integration at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 using RHS created at 20 Making slow rhs at time 20.16666666667 for fast variables advancing from 20 to 20.25 Fast time integration at level 0 from 20 to 20.125 with dt = 0.125 Fast time integration at level 0 from 20.125 to 20.25 with dt = 0.125 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666666667 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 Fast time integration at level 0 from 20 to 20.125 with dt = 0.125 Fast time integration at level 0 from 20.125 to 20.25 with dt = 0.125 Fast time integration at level 0 from 20.25 to 20.375 with dt = 0.125 Fast time integration at level 0 from 20.375 to 20.5 with dt = 0.125 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 80000 cells Cloud fraction 20 1 Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.425885382 seconds. TIME= 20.5 MASS = 5.886316959e+10 RHO THETA = 1.821622651e+13 RHO SCALAR = 0 RHO QTOTAL = 1177086535 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8805462856 (terrain aware) 0.8805462856 (terrain unaware) Anelastic dt at level 0 would be: 163.1480164 (terrain aware) 163.1480164 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666666667 Fast time integration at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 using RHS created at 20.5 Making slow rhs at time 20.66666666667 for fast variables advancing from 20.5 to 20.75 Fast time integration at level 0 from 20.5 to 20.625 with dt = 0.125 Fast time integration at level 0 from 20.625 to 20.75 with dt = 0.125 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666666667 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 Fast time integration at level 0 from 20.5 to 20.625 with dt = 0.125 Fast time integration at level 0 from 20.625 to 20.75 with dt = 0.125 Fast time integration at level 0 from 20.75 to 20.875 with dt = 0.125 Fast time integration at level 0 from 20.875 to 21 with dt = 0.125 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 80000 cells Cloud fraction 20.5 1 Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.425960591 seconds. TIME= 21 MASS = 5.886316959e+10 RHO THETA = 1.821645927e+13 RHO SCALAR = 0 RHO QTOTAL = 1177082164 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.880489385 (terrain aware) 0.880489385 (terrain unaware) Anelastic dt at level 0 would be: 156.1556473 (terrain aware) 156.1556473 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666666667 Fast time integration at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 using RHS created at 21 Making slow rhs at time 21.16666666667 for fast variables advancing from 21 to 21.25 Fast time integration at level 0 from 21 to 21.125 with dt = 0.125 Fast time integration at level 0 from 21.125 to 21.25 with dt = 0.125 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666666667 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 Fast time integration at level 0 from 21 to 21.125 with dt = 0.125 Fast time integration at level 0 from 21.125 to 21.25 with dt = 0.125 Fast time integration at level 0 from 21.25 to 21.375 with dt = 0.125 Fast time integration at level 0 from 21.375 to 21.5 with dt = 0.125 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 80000 cells Cloud fraction 21 1 Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.425375871 seconds. TIME= 21.5 MASS = 5.886316959e+10 RHO THETA = 1.821668904e+13 RHO SCALAR = 0 RHO QTOTAL = 1177077789 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8804325979 (terrain aware) 0.8804325979 (terrain unaware) Anelastic dt at level 0 would be: 149.639341 (terrain aware) 149.639341 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666666667 Fast time integration at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 using RHS created at 21.5 Making slow rhs at time 21.66666666667 for fast variables advancing from 21.5 to 21.75 Fast time integration at level 0 from 21.5 to 21.625 with dt = 0.125 Fast time integration at level 0 from 21.625 to 21.75 with dt = 0.125 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666666667 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 Fast time integration at level 0 from 21.5 to 21.625 with dt = 0.125 Fast time integration at level 0 from 21.625 to 21.75 with dt = 0.125 Fast time integration at level 0 from 21.75 to 21.875 with dt = 0.125 Fast time integration at level 0 from 21.875 to 22 with dt = 0.125 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 80000 cells Cloud fraction 21.5 1 Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.425795156 seconds. TIME= 22 MASS = 5.886316959e+10 RHO THETA = 1.821691597e+13 RHO SCALAR = 0 RHO QTOTAL = 1177073410 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8803757308 (terrain aware) 0.8803757308 (terrain unaware) Anelastic dt at level 0 would be: 143.6045534 (terrain aware) 143.6045534 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666666667 Fast time integration at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 using RHS created at 22 Making slow rhs at time 22.16666666667 for fast variables advancing from 22 to 22.25 Fast time integration at level 0 from 22 to 22.125 with dt = 0.125 Fast time integration at level 0 from 22.125 to 22.25 with dt = 0.125 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666666667 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 Fast time integration at level 0 from 22 to 22.125 with dt = 0.125 Fast time integration at level 0 from 22.125 to 22.25 with dt = 0.125 Fast time integration at level 0 from 22.25 to 22.375 with dt = 0.125 Fast time integration at level 0 from 22.375 to 22.5 with dt = 0.125 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 80000 cells Cloud fraction 22 1 Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.425587641 seconds. TIME= 22.5 MASS = 5.886316959e+10 RHO THETA = 1.821714021e+13 RHO SCALAR = 0 RHO QTOTAL = 1177069029 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.880318573 (terrain aware) 0.880318573 (terrain unaware) Anelastic dt at level 0 would be: 138.0577861 (terrain aware) 138.0577861 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666666667 Fast time integration at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 using RHS created at 22.5 Making slow rhs at time 22.66666666667 for fast variables advancing from 22.5 to 22.75 Fast time integration at level 0 from 22.5 to 22.625 with dt = 0.125 Fast time integration at level 0 from 22.625 to 22.75 with dt = 0.125 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666666667 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 Fast time integration at level 0 from 22.5 to 22.625 with dt = 0.125 Fast time integration at level 0 from 22.625 to 22.75 with dt = 0.125 Fast time integration at level 0 from 22.75 to 22.875 with dt = 0.125 Fast time integration at level 0 from 22.875 to 23 with dt = 0.125 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 80000 cells Cloud fraction 22.5 1 Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.42590553 seconds. TIME= 23 MASS = 5.886316959e+10 RHO THETA = 1.821736187e+13 RHO SCALAR = 0 RHO QTOTAL = 1177064644 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8802610258 (terrain aware) 0.8802610258 (terrain unaware) Anelastic dt at level 0 would be: 132.9279596 (terrain aware) 132.9279596 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666666667 Fast time integration at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 using RHS created at 23 Making slow rhs at time 23.16666666667 for fast variables advancing from 23 to 23.25 Fast time integration at level 0 from 23 to 23.125 with dt = 0.125 Fast time integration at level 0 from 23.125 to 23.25 with dt = 0.125 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666666667 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 Fast time integration at level 0 from 23 to 23.125 with dt = 0.125 Fast time integration at level 0 from 23.125 to 23.25 with dt = 0.125 Fast time integration at level 0 from 23.25 to 23.375 with dt = 0.125 Fast time integration at level 0 from 23.375 to 23.5 with dt = 0.125 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 80000 cells Cloud fraction 23 1 Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.425635113 seconds. TIME= 23.5 MASS = 5.886316959e+10 RHO THETA = 1.82175811e+13 RHO SCALAR = 0 RHO QTOTAL = 1177060255 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8802031377 (terrain aware) 0.8802031377 (terrain unaware) Anelastic dt at level 0 would be: 128.156634 (terrain aware) 128.156634 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666666667 Fast time integration at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 using RHS created at 23.5 Making slow rhs at time 23.66666666667 for fast variables advancing from 23.5 to 23.75 Fast time integration at level 0 from 23.5 to 23.625 with dt = 0.125 Fast time integration at level 0 from 23.625 to 23.75 with dt = 0.125 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666666667 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 Fast time integration at level 0 from 23.5 to 23.625 with dt = 0.125 Fast time integration at level 0 from 23.625 to 23.75 with dt = 0.125 Fast time integration at level 0 from 23.75 to 23.875 with dt = 0.125 Fast time integration at level 0 from 23.875 to 24 with dt = 0.125 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 80000 cells Cloud fraction 23.5 1 Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.425363501 seconds. TIME= 24 MASS = 5.886316959e+10 RHO THETA = 1.821779793e+13 RHO SCALAR = 0 RHO QTOTAL = 1177055864 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8801450689 (terrain aware) 0.8801450689 (terrain unaware) Anelastic dt at level 0 would be: 123.6823039 (terrain aware) 123.6823039 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666666667 Fast time integration at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 using RHS created at 24 Making slow rhs at time 24.16666666667 for fast variables advancing from 24 to 24.25 Fast time integration at level 0 from 24 to 24.125 with dt = 0.125 Fast time integration at level 0 from 24.125 to 24.25 with dt = 0.125 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666666667 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 Fast time integration at level 0 from 24 to 24.125 with dt = 0.125 Fast time integration at level 0 from 24.125 to 24.25 with dt = 0.125 Fast time integration at level 0 from 24.25 to 24.375 with dt = 0.125 Fast time integration at level 0 from 24.375 to 24.5 with dt = 0.125 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 80000 cells Cloud fraction 24 1 Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.425235276 seconds. TIME= 24.5 MASS = 5.886316959e+10 RHO THETA = 1.821801245e+13 RHO SCALAR = 0 RHO QTOTAL = 1177051470 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8800869811 (terrain aware) 0.8800869811 (terrain unaware) Anelastic dt at level 0 would be: 119.4691666 (terrain aware) 119.4691666 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666666667 Fast time integration at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 using RHS created at 24.5 Making slow rhs at time 24.66666666667 for fast variables advancing from 24.5 to 24.75 Fast time integration at level 0 from 24.5 to 24.625 with dt = 0.125 Fast time integration at level 0 from 24.625 to 24.75 with dt = 0.125 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666666667 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 Fast time integration at level 0 from 24.5 to 24.625 with dt = 0.125 Fast time integration at level 0 from 24.625 to 24.75 with dt = 0.125 Fast time integration at level 0 from 24.75 to 24.875 with dt = 0.125 Fast time integration at level 0 from 24.875 to 25 with dt = 0.125 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 80000 cells Cloud fraction 24.5 1 Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.425075965 seconds. TIME= 25 MASS = 5.886316959e+10 RHO THETA = 1.82182311e+13 RHO SCALAR = 0 RHO QTOTAL = 1177047073 Coarse STEP 51 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8800289753 (terrain aware) 0.8800289753 (terrain unaware) Anelastic dt at level 0 would be: 115.5222194 (terrain aware) 115.5222194 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 51] ADVANCE from elapsed time = 25 to 25.5 with dt = 0.5 Making slow rhs at time 25 for fast variables advancing from 25 to 25.16666666667 Fast time integration at level 0 from 25 to 25.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 25 to 25.16666666667 with dt = 0.1666666666667 using RHS created at 25 Making slow rhs at time 25.16666666667 for fast variables advancing from 25 to 25.25 Fast time integration at level 0 from 25 to 25.125 with dt = 0.125 Fast time integration at level 0 from 25.125 to 25.25 with dt = 0.125 Time integration of scalars at level 0 from 25 to 25.25 with dt = 0.25 using RHS created at 25.16666666667 Making slow rhs at time 25.25 for fast variables advancing from 25 to 25.5 Fast time integration at level 0 from 25 to 25.125 with dt = 0.125 Fast time integration at level 0 from 25.125 to 25.25 with dt = 0.125 Fast time integration at level 0 from 25.25 to 25.375 with dt = 0.125 Fast time integration at level 0 from 25.375 to 25.5 with dt = 0.125 Time integration of scalars at level 0 from 25 to 25.5 with dt = 0.5 using RHS created at 25.25 Done with advance_dycore at level 0 [Level 0 step 51] Advanced 80000 cells Cloud fraction 25 1 Coarse STEP 51 ends. TIME = 25.5 DT = 0.5 Timestep time = 0.427215531 seconds. TIME= 25.5 MASS = 5.886316959e+10 RHO THETA = 1.821845133e+13 RHO SCALAR = 0 RHO QTOTAL = 1177042673 Coarse STEP 52 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8799710867 (terrain aware) 0.8799710867 (terrain unaware) Anelastic dt at level 0 would be: 111.8661849 (terrain aware) 111.8661849 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 52] ADVANCE from elapsed time = 25.5 to 26 with dt = 0.5 Making slow rhs at time 25.5 for fast variables advancing from 25.5 to 25.66666666667 Fast time integration at level 0 from 25.5 to 25.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 25.5 to 25.66666666667 with dt = 0.1666666666667 using RHS created at 25.5 Making slow rhs at time 25.66666666667 for fast variables advancing from 25.5 to 25.75 Fast time integration at level 0 from 25.5 to 25.625 with dt = 0.125 Fast time integration at level 0 from 25.625 to 25.75 with dt = 0.125 Time integration of scalars at level 0 from 25.5 to 25.75 with dt = 0.25 using RHS created at 25.66666666667 Making slow rhs at time 25.75 for fast variables advancing from 25.5 to 26 Fast time integration at level 0 from 25.5 to 25.625 with dt = 0.125 Fast time integration at level 0 from 25.625 to 25.75 with dt = 0.125 Fast time integration at level 0 from 25.75 to 25.875 with dt = 0.125 Fast time integration at level 0 from 25.875 to 26 with dt = 0.125 Time integration of scalars at level 0 from 25.5 to 26 with dt = 0.5 using RHS created at 25.75 Done with advance_dycore at level 0 [Level 0 step 52] Advanced 80000 cells Cloud fraction 25.5 1 Coarse STEP 52 ends. TIME = 26 DT = 0.5 Timestep time = 0.428035714 seconds. TIME= 26 MASS = 5.886316959e+10 RHO THETA = 1.821866854e+13 RHO SCALAR = 0 RHO QTOTAL = 1177038267 Coarse STEP 53 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8799133331 (terrain aware) 0.8799133331 (terrain unaware) Anelastic dt at level 0 would be: 108.4841807 (terrain aware) 108.4841807 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 53] ADVANCE from elapsed time = 26 to 26.5 with dt = 0.5 Making slow rhs at time 26 for fast variables advancing from 26 to 26.16666666667 Fast time integration at level 0 from 26 to 26.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 26 to 26.16666666667 with dt = 0.1666666666667 using RHS created at 26 Making slow rhs at time 26.16666666667 for fast variables advancing from 26 to 26.25 Fast time integration at level 0 from 26 to 26.125 with dt = 0.125 Fast time integration at level 0 from 26.125 to 26.25 with dt = 0.125 Time integration of scalars at level 0 from 26 to 26.25 with dt = 0.25 using RHS created at 26.16666666667 Making slow rhs at time 26.25 for fast variables advancing from 26 to 26.5 Fast time integration at level 0 from 26 to 26.125 with dt = 0.125 Fast time integration at level 0 from 26.125 to 26.25 with dt = 0.125 Fast time integration at level 0 from 26.25 to 26.375 with dt = 0.125 Fast time integration at level 0 from 26.375 to 26.5 with dt = 0.125 Time integration of scalars at level 0 from 26 to 26.5 with dt = 0.5 using RHS created at 26.25 Done with advance_dycore at level 0 [Level 0 step 53] Advanced 80000 cells Cloud fraction 26 1 Coarse STEP 53 ends. TIME = 26.5 DT = 0.5 Timestep time = 0.427831639 seconds. TIME= 26.5 MASS = 5.886316959e+10 RHO THETA = 1.82188826e+13 RHO SCALAR = 0 RHO QTOTAL = 1177033857 Coarse STEP 54 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8798557174 (terrain aware) 0.8798557174 (terrain unaware) Anelastic dt at level 0 would be: 105.3137776 (terrain aware) 105.3137776 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 54] ADVANCE from elapsed time = 26.5 to 27 with dt = 0.5 Making slow rhs at time 26.5 for fast variables advancing from 26.5 to 26.66666666667 Fast time integration at level 0 from 26.5 to 26.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 26.5 to 26.66666666667 with dt = 0.1666666666667 using RHS created at 26.5 Making slow rhs at time 26.66666666667 for fast variables advancing from 26.5 to 26.75 Fast time integration at level 0 from 26.5 to 26.625 with dt = 0.125 Fast time integration at level 0 from 26.625 to 26.75 with dt = 0.125 Time integration of scalars at level 0 from 26.5 to 26.75 with dt = 0.25 using RHS created at 26.66666666667 Making slow rhs at time 26.75 for fast variables advancing from 26.5 to 27 Fast time integration at level 0 from 26.5 to 26.625 with dt = 0.125 Fast time integration at level 0 from 26.625 to 26.75 with dt = 0.125 Fast time integration at level 0 from 26.75 to 26.875 with dt = 0.125 Fast time integration at level 0 from 26.875 to 27 with dt = 0.125 Time integration of scalars at level 0 from 26.5 to 27 with dt = 0.5 using RHS created at 26.75 Done with advance_dycore at level 0 [Level 0 step 54] Advanced 80000 cells Cloud fraction 26.5 1 Coarse STEP 54 ends. TIME = 27 DT = 0.5 Timestep time = 0.427721118 seconds. TIME= 27 MASS = 5.886316959e+10 RHO THETA = 1.821909324e+13 RHO SCALAR = 0 RHO QTOTAL = 1177029442 Coarse STEP 55 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8797982213 (terrain aware) 0.8797982213 (terrain unaware) Anelastic dt at level 0 would be: 102.4738205 (terrain aware) 102.4738205 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 55] ADVANCE from elapsed time = 27 to 27.5 with dt = 0.5 Making slow rhs at time 27 for fast variables advancing from 27 to 27.16666666667 Fast time integration at level 0 from 27 to 27.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 27 to 27.16666666667 with dt = 0.1666666666667 using RHS created at 27 Making slow rhs at time 27.16666666667 for fast variables advancing from 27 to 27.25 Fast time integration at level 0 from 27 to 27.125 with dt = 0.125 Fast time integration at level 0 from 27.125 to 27.25 with dt = 0.125 Time integration of scalars at level 0 from 27 to 27.25 with dt = 0.25 using RHS created at 27.16666666667 Making slow rhs at time 27.25 for fast variables advancing from 27 to 27.5 Fast time integration at level 0 from 27 to 27.125 with dt = 0.125 Fast time integration at level 0 from 27.125 to 27.25 with dt = 0.125 Fast time integration at level 0 from 27.25 to 27.375 with dt = 0.125 Fast time integration at level 0 from 27.375 to 27.5 with dt = 0.125 Time integration of scalars at level 0 from 27 to 27.5 with dt = 0.5 using RHS created at 27.25 Done with advance_dycore at level 0 [Level 0 step 55] Advanced 80000 cells Cloud fraction 27 1 Coarse STEP 55 ends. TIME = 27.5 DT = 0.5 Timestep time = 0.427806252 seconds. TIME= 27.5 MASS = 5.886316959e+10 RHO THETA = 1.821930036e+13 RHO SCALAR = 0 RHO QTOTAL = 1177025021 Coarse STEP 56 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8797407922 (terrain aware) 0.8797407922 (terrain unaware) Anelastic dt at level 0 would be: 99.94545218 (terrain aware) 99.94545218 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 56] ADVANCE from elapsed time = 27.5 to 28 with dt = 0.5 Making slow rhs at time 27.5 for fast variables advancing from 27.5 to 27.66666666667 Fast time integration at level 0 from 27.5 to 27.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 27.5 to 27.66666666667 with dt = 0.1666666666667 using RHS created at 27.5 Making slow rhs at time 27.66666666667 for fast variables advancing from 27.5 to 27.75 Fast time integration at level 0 from 27.5 to 27.625 with dt = 0.125 Fast time integration at level 0 from 27.625 to 27.75 with dt = 0.125 Time integration of scalars at level 0 from 27.5 to 27.75 with dt = 0.25 using RHS created at 27.66666666667 Making slow rhs at time 27.75 for fast variables advancing from 27.5 to 28 Fast time integration at level 0 from 27.5 to 27.625 with dt = 0.125 Fast time integration at level 0 from 27.625 to 27.75 with dt = 0.125 Fast time integration at level 0 from 27.75 to 27.875 with dt = 0.125 Fast time integration at level 0 from 27.875 to 28 with dt = 0.125 Time integration of scalars at level 0 from 27.5 to 28 with dt = 0.5 using RHS created at 27.75 Done with advance_dycore at level 0 [Level 0 step 56] Advanced 80000 cells Cloud fraction 27.5 1 Coarse STEP 56 ends. TIME = 28 DT = 0.5 Timestep time = 0.42711757 seconds. TIME= 28 MASS = 5.886316959e+10 RHO THETA = 1.8219504e+13 RHO SCALAR = 0 RHO QTOTAL = 1177020595 Coarse STEP 57 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8796833716 (terrain aware) 0.8796833716 (terrain unaware) Anelastic dt at level 0 would be: 97.68591771 (terrain aware) 97.68591771 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 57] ADVANCE from elapsed time = 28 to 28.5 with dt = 0.5 Making slow rhs at time 28 for fast variables advancing from 28 to 28.16666666667 Fast time integration at level 0 from 28 to 28.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 28 to 28.16666666667 with dt = 0.1666666666667 using RHS created at 28 Making slow rhs at time 28.16666666667 for fast variables advancing from 28 to 28.25 Fast time integration at level 0 from 28 to 28.125 with dt = 0.125 Fast time integration at level 0 from 28.125 to 28.25 with dt = 0.125 Time integration of scalars at level 0 from 28 to 28.25 with dt = 0.25 using RHS created at 28.16666666667 Making slow rhs at time 28.25 for fast variables advancing from 28 to 28.5 Fast time integration at level 0 from 28 to 28.125 with dt = 0.125 Fast time integration at level 0 from 28.125 to 28.25 with dt = 0.125 Fast time integration at level 0 from 28.25 to 28.375 with dt = 0.125 Fast time integration at level 0 from 28.375 to 28.5 with dt = 0.125 Time integration of scalars at level 0 from 28 to 28.5 with dt = 0.5 using RHS created at 28.25 Done with advance_dycore at level 0 [Level 0 step 57] Advanced 80000 cells Cloud fraction 28 1 Coarse STEP 57 ends. TIME = 28.5 DT = 0.5 Timestep time = 0.427047121 seconds. TIME= 28.5 MASS = 5.886316959e+10 RHO THETA = 1.821970442e+13 RHO SCALAR = 0 RHO QTOTAL = 1177016164 Coarse STEP 58 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.87962592 (terrain aware) 0.87962592 (terrain unaware) Anelastic dt at level 0 would be: 95.62096491 (terrain aware) 95.62096491 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 58] ADVANCE from elapsed time = 28.5 to 29 with dt = 0.5 Making slow rhs at time 28.5 for fast variables advancing from 28.5 to 28.66666666667 Fast time integration at level 0 from 28.5 to 28.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 28.5 to 28.66666666667 with dt = 0.1666666666667 using RHS created at 28.5 Making slow rhs at time 28.66666666667 for fast variables advancing from 28.5 to 28.75 Fast time integration at level 0 from 28.5 to 28.625 with dt = 0.125 Fast time integration at level 0 from 28.625 to 28.75 with dt = 0.125 Time integration of scalars at level 0 from 28.5 to 28.75 with dt = 0.25 using RHS created at 28.66666666667 Making slow rhs at time 28.75 for fast variables advancing from 28.5 to 29 Fast time integration at level 0 from 28.5 to 28.625 with dt = 0.125 Fast time integration at level 0 from 28.625 to 28.75 with dt = 0.125 Fast time integration at level 0 from 28.75 to 28.875 with dt = 0.125 Fast time integration at level 0 from 28.875 to 29 with dt = 0.125 Time integration of scalars at level 0 from 28.5 to 29 with dt = 0.5 using RHS created at 28.75 Done with advance_dycore at level 0 [Level 0 step 58] Advanced 80000 cells Cloud fraction 28.5 1 Coarse STEP 58 ends. TIME = 29 DT = 0.5 Timestep time = 0.426347356 seconds. TIME= 29 MASS = 5.886316959e+10 RHO THETA = 1.821990171e+13 RHO SCALAR = 0 RHO QTOTAL = 1177011728 Coarse STEP 59 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8795684532 (terrain aware) 0.8795684532 (terrain unaware) Anelastic dt at level 0 would be: 93.65901458 (terrain aware) 93.65901458 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 59] ADVANCE from elapsed time = 29 to 29.5 with dt = 0.5 Making slow rhs at time 29 for fast variables advancing from 29 to 29.16666666667 Fast time integration at level 0 from 29 to 29.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 29 to 29.16666666667 with dt = 0.1666666666667 using RHS created at 29 Making slow rhs at time 29.16666666667 for fast variables advancing from 29 to 29.25 Fast time integration at level 0 from 29 to 29.125 with dt = 0.125 Fast time integration at level 0 from 29.125 to 29.25 with dt = 0.125 Time integration of scalars at level 0 from 29 to 29.25 with dt = 0.25 using RHS created at 29.16666666667 Making slow rhs at time 29.25 for fast variables advancing from 29 to 29.5 Fast time integration at level 0 from 29 to 29.125 with dt = 0.125 Fast time integration at level 0 from 29.125 to 29.25 with dt = 0.125 Fast time integration at level 0 from 29.25 to 29.375 with dt = 0.125 Fast time integration at level 0 from 29.375 to 29.5 with dt = 0.125 Time integration of scalars at level 0 from 29 to 29.5 with dt = 0.5 using RHS created at 29.25 Done with advance_dycore at level 0 [Level 0 step 59] Advanced 80000 cells Cloud fraction 29 1 Coarse STEP 59 ends. TIME = 29.5 DT = 0.5 Timestep time = 0.426656346 seconds. TIME= 29.5 MASS = 5.886316959e+10 RHO THETA = 1.822009609e+13 RHO SCALAR = 0 RHO QTOTAL = 1177007287 Coarse STEP 60 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8795110473 (terrain aware) 0.8795110473 (terrain unaware) Anelastic dt at level 0 would be: 91.73437641 (terrain aware) 91.73437641 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 60] ADVANCE from elapsed time = 29.5 to 30 with dt = 0.5 Making slow rhs at time 29.5 for fast variables advancing from 29.5 to 29.66666666667 Fast time integration at level 0 from 29.5 to 29.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 29.5 to 29.66666666667 with dt = 0.1666666666667 using RHS created at 29.5 Making slow rhs at time 29.66666666667 for fast variables advancing from 29.5 to 29.75 Fast time integration at level 0 from 29.5 to 29.625 with dt = 0.125 Fast time integration at level 0 from 29.625 to 29.75 with dt = 0.125 Time integration of scalars at level 0 from 29.5 to 29.75 with dt = 0.25 using RHS created at 29.66666666667 Making slow rhs at time 29.75 for fast variables advancing from 29.5 to 30 Fast time integration at level 0 from 29.5 to 29.625 with dt = 0.125 Fast time integration at level 0 from 29.625 to 29.75 with dt = 0.125 Fast time integration at level 0 from 29.75 to 29.875 with dt = 0.125 Fast time integration at level 0 from 29.875 to 30 with dt = 0.125 Time integration of scalars at level 0 from 29.5 to 30 with dt = 0.5 using RHS created at 29.75 Done with advance_dycore at level 0 [Level 0 step 60] Advanced 80000 cells Cloud fraction 29.5 1 Coarse STEP 60 ends. TIME = 30 DT = 0.5 Timestep time = 0.427208947 seconds. TIME= 30 MASS = 5.886316959e+10 RHO THETA = 1.822028783e+13 RHO SCALAR = 0 RHO QTOTAL = 1177002841 Coarse STEP 61 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8794538262 (terrain aware) 0.8794538262 (terrain unaware) Anelastic dt at level 0 would be: 89.83967259 (terrain aware) 89.83967259 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 61] ADVANCE from elapsed time = 30 to 30.5 with dt = 0.5 Making slow rhs at time 30 for fast variables advancing from 30 to 30.16666666667 Fast time integration at level 0 from 30 to 30.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 30 to 30.16666666667 with dt = 0.1666666666667 using RHS created at 30 Making slow rhs at time 30.16666666667 for fast variables advancing from 30 to 30.25 Fast time integration at level 0 from 30 to 30.125 with dt = 0.125 Fast time integration at level 0 from 30.125 to 30.25 with dt = 0.125 Time integration of scalars at level 0 from 30 to 30.25 with dt = 0.25 using RHS created at 30.16666666667 Making slow rhs at time 30.25 for fast variables advancing from 30 to 30.5 Fast time integration at level 0 from 30 to 30.125 with dt = 0.125 Fast time integration at level 0 from 30.125 to 30.25 with dt = 0.125 Fast time integration at level 0 from 30.25 to 30.375 with dt = 0.125 Fast time integration at level 0 from 30.375 to 30.5 with dt = 0.125 Time integration of scalars at level 0 from 30 to 30.5 with dt = 0.5 using RHS created at 30.25 Done with advance_dycore at level 0 [Level 0 step 61] Advanced 80000 cells Cloud fraction 30 1 Coarse STEP 61 ends. TIME = 30.5 DT = 0.5 Timestep time = 0.42717522 seconds. TIME= 30.5 MASS = 5.886316959e+10 RHO THETA = 1.822047731e+13 RHO SCALAR = 0 RHO QTOTAL = 1176998388 Coarse STEP 62 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8793969106 (terrain aware) 0.8793969106 (terrain unaware) Anelastic dt at level 0 would be: 88.00555316 (terrain aware) 88.00555316 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 62] ADVANCE from elapsed time = 30.5 to 31 with dt = 0.5 Making slow rhs at time 30.5 for fast variables advancing from 30.5 to 30.66666666667 Fast time integration at level 0 from 30.5 to 30.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 30.5 to 30.66666666667 with dt = 0.1666666666667 using RHS created at 30.5 Making slow rhs at time 30.66666666667 for fast variables advancing from 30.5 to 30.75 Fast time integration at level 0 from 30.5 to 30.625 with dt = 0.125 Fast time integration at level 0 from 30.625 to 30.75 with dt = 0.125 Time integration of scalars at level 0 from 30.5 to 30.75 with dt = 0.25 using RHS created at 30.66666666667 Making slow rhs at time 30.75 for fast variables advancing from 30.5 to 31 Fast time integration at level 0 from 30.5 to 30.625 with dt = 0.125 Fast time integration at level 0 from 30.625 to 30.75 with dt = 0.125 Fast time integration at level 0 from 30.75 to 30.875 with dt = 0.125 Fast time integration at level 0 from 30.875 to 31 with dt = 0.125 Time integration of scalars at level 0 from 30.5 to 31 with dt = 0.5 using RHS created at 30.75 Done with advance_dycore at level 0 [Level 0 step 62] Advanced 80000 cells Cloud fraction 30.5 1 Coarse STEP 62 ends. TIME = 31 DT = 0.5 Timestep time = 0.42709962 seconds. TIME= 31 MASS = 5.886316959e+10 RHO THETA = 1.822066494e+13 RHO SCALAR = 0 RHO QTOTAL = 1176993929 Coarse STEP 63 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8793403741 (terrain aware) 0.8793403741 (terrain unaware) Anelastic dt at level 0 would be: 86.25480263 (terrain aware) 86.25480263 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 63] ADVANCE from elapsed time = 31 to 31.5 with dt = 0.5 Making slow rhs at time 31 for fast variables advancing from 31 to 31.16666666667 Fast time integration at level 0 from 31 to 31.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 31 to 31.16666666667 with dt = 0.1666666666667 using RHS created at 31 Making slow rhs at time 31.16666666667 for fast variables advancing from 31 to 31.25 Fast time integration at level 0 from 31 to 31.125 with dt = 0.125 Fast time integration at level 0 from 31.125 to 31.25 with dt = 0.125 Time integration of scalars at level 0 from 31 to 31.25 with dt = 0.25 using RHS created at 31.16666666667 Making slow rhs at time 31.25 for fast variables advancing from 31 to 31.5 Fast time integration at level 0 from 31 to 31.125 with dt = 0.125 Fast time integration at level 0 from 31.125 to 31.25 with dt = 0.125 Fast time integration at level 0 from 31.25 to 31.375 with dt = 0.125 Fast time integration at level 0 from 31.375 to 31.5 with dt = 0.125 Time integration of scalars at level 0 from 31 to 31.5 with dt = 0.5 using RHS created at 31.25 Done with advance_dycore at level 0 [Level 0 step 63] Advanced 80000 cells Cloud fraction 31 1 Coarse STEP 63 ends. TIME = 31.5 DT = 0.5 Timestep time = 0.426921674 seconds. TIME= 31.5 MASS = 5.886316959e+10 RHO THETA = 1.822085113e+13 RHO SCALAR = 0 RHO QTOTAL = 1176989464 Coarse STEP 64 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8792842145 (terrain aware) 0.8792842145 (terrain unaware) Anelastic dt at level 0 would be: 84.58532397 (terrain aware) 84.58532397 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 64] ADVANCE from elapsed time = 31.5 to 32 with dt = 0.5 Making slow rhs at time 31.5 for fast variables advancing from 31.5 to 31.66666666667 Fast time integration at level 0 from 31.5 to 31.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 31.5 to 31.66666666667 with dt = 0.1666666666667 using RHS created at 31.5 Making slow rhs at time 31.66666666667 for fast variables advancing from 31.5 to 31.75 Fast time integration at level 0 from 31.5 to 31.625 with dt = 0.125 Fast time integration at level 0 from 31.625 to 31.75 with dt = 0.125 Time integration of scalars at level 0 from 31.5 to 31.75 with dt = 0.25 using RHS created at 31.66666666667 Making slow rhs at time 31.75 for fast variables advancing from 31.5 to 32 Fast time integration at level 0 from 31.5 to 31.625 with dt = 0.125 Fast time integration at level 0 from 31.625 to 31.75 with dt = 0.125 Fast time integration at level 0 from 31.75 to 31.875 with dt = 0.125 Fast time integration at level 0 from 31.875 to 32 with dt = 0.125 Time integration of scalars at level 0 from 31.5 to 32 with dt = 0.5 using RHS created at 31.75 Done with advance_dycore at level 0 [Level 0 step 64] Advanced 80000 cells Cloud fraction 31.5 1 Coarse STEP 64 ends. TIME = 32 DT = 0.5 Timestep time = 0.42702716 seconds. TIME= 32 MASS = 5.886316959e+10 RHO THETA = 1.822103803e+13 RHO SCALAR = 0 RHO QTOTAL = 1176984993 Coarse STEP 65 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8792283737 (terrain aware) 0.8792283737 (terrain unaware) Anelastic dt at level 0 would be: 82.98361097 (terrain aware) 82.98361097 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 65] ADVANCE from elapsed time = 32 to 32.5 with dt = 0.5 Making slow rhs at time 32 for fast variables advancing from 32 to 32.16666666667 Fast time integration at level 0 from 32 to 32.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 32 to 32.16666666667 with dt = 0.1666666666667 using RHS created at 32 Making slow rhs at time 32.16666666667 for fast variables advancing from 32 to 32.25 Fast time integration at level 0 from 32 to 32.125 with dt = 0.125 Fast time integration at level 0 from 32.125 to 32.25 with dt = 0.125 Time integration of scalars at level 0 from 32 to 32.25 with dt = 0.25 using RHS created at 32.16666666667 Making slow rhs at time 32.25 for fast variables advancing from 32 to 32.5 Fast time integration at level 0 from 32 to 32.125 with dt = 0.125 Fast time integration at level 0 from 32.125 to 32.25 with dt = 0.125 Fast time integration at level 0 from 32.25 to 32.375 with dt = 0.125 Fast time integration at level 0 from 32.375 to 32.5 with dt = 0.125 Time integration of scalars at level 0 from 32 to 32.5 with dt = 0.5 using RHS created at 32.25 Done with advance_dycore at level 0 [Level 0 step 65] Advanced 80000 cells Cloud fraction 32 1 Coarse STEP 65 ends. TIME = 32.5 DT = 0.5 Timestep time = 0.426441289 seconds. TIME= 32.5 MASS = 5.886316959e+10 RHO THETA = 1.822123073e+13 RHO SCALAR = 0 RHO QTOTAL = 1176980517 Coarse STEP 66 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.879172762 (terrain aware) 0.879172762 (terrain unaware) Anelastic dt at level 0 would be: 81.44957134 (terrain aware) 81.44957134 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 66] ADVANCE from elapsed time = 32.5 to 33 with dt = 0.5 Making slow rhs at time 32.5 for fast variables advancing from 32.5 to 32.66666666667 Fast time integration at level 0 from 32.5 to 32.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 32.5 to 32.66666666667 with dt = 0.1666666666667 using RHS created at 32.5 Making slow rhs at time 32.66666666667 for fast variables advancing from 32.5 to 32.75 Fast time integration at level 0 from 32.5 to 32.625 with dt = 0.125 Fast time integration at level 0 from 32.625 to 32.75 with dt = 0.125 Time integration of scalars at level 0 from 32.5 to 32.75 with dt = 0.25 using RHS created at 32.66666666667 Making slow rhs at time 32.75 for fast variables advancing from 32.5 to 33 Fast time integration at level 0 from 32.5 to 32.625 with dt = 0.125 Fast time integration at level 0 from 32.625 to 32.75 with dt = 0.125 Fast time integration at level 0 from 32.75 to 32.875 with dt = 0.125 Fast time integration at level 0 from 32.875 to 33 with dt = 0.125 Time integration of scalars at level 0 from 32.5 to 33 with dt = 0.5 using RHS created at 32.75 Done with advance_dycore at level 0 [Level 0 step 66] Advanced 80000 cells Cloud fraction 32.5 1 Coarse STEP 66 ends. TIME = 33 DT = 0.5 Timestep time = 0.425829324 seconds. TIME= 33 MASS = 5.886316959e+10 RHO THETA = 1.822142355e+13 RHO SCALAR = 0 RHO QTOTAL = 1176976037 Coarse STEP 67 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8791172738 (terrain aware) 0.8791172738 (terrain unaware) Anelastic dt at level 0 would be: 79.99221817 (terrain aware) 79.99221817 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 67] ADVANCE from elapsed time = 33 to 33.5 with dt = 0.5 Making slow rhs at time 33 for fast variables advancing from 33 to 33.16666666667 Fast time integration at level 0 from 33 to 33.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 33 to 33.16666666667 with dt = 0.1666666666667 using RHS created at 33 Making slow rhs at time 33.16666666667 for fast variables advancing from 33 to 33.25 Fast time integration at level 0 from 33 to 33.125 with dt = 0.125 Fast time integration at level 0 from 33.125 to 33.25 with dt = 0.125 Time integration of scalars at level 0 from 33 to 33.25 with dt = 0.25 using RHS created at 33.16666666667 Making slow rhs at time 33.25 for fast variables advancing from 33 to 33.5 Fast time integration at level 0 from 33 to 33.125 with dt = 0.125 Fast time integration at level 0 from 33.125 to 33.25 with dt = 0.125 Fast time integration at level 0 from 33.25 to 33.375 with dt = 0.125 Fast time integration at level 0 from 33.375 to 33.5 with dt = 0.125 Time integration of scalars at level 0 from 33 to 33.5 with dt = 0.5 using RHS created at 33.25 Done with advance_dycore at level 0 [Level 0 step 67] Advanced 80000 cells Cloud fraction 33 1 Coarse STEP 67 ends. TIME = 33.5 DT = 0.5 Timestep time = 0.42585842 seconds. TIME= 33.5 MASS = 5.886316959e+10 RHO THETA = 1.822161558e+13 RHO SCALAR = 0 RHO QTOTAL = 1176971550 Coarse STEP 68 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8790617867 (terrain aware) 0.8790617867 (terrain unaware) Anelastic dt at level 0 would be: 78.61703962 (terrain aware) 78.61703962 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 68] ADVANCE from elapsed time = 33.5 to 34 with dt = 0.5 Making slow rhs at time 33.5 for fast variables advancing from 33.5 to 33.66666666667 Fast time integration at level 0 from 33.5 to 33.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 33.5 to 33.66666666667 with dt = 0.1666666666667 using RHS created at 33.5 Making slow rhs at time 33.66666666667 for fast variables advancing from 33.5 to 33.75 Fast time integration at level 0 from 33.5 to 33.625 with dt = 0.125 Fast time integration at level 0 from 33.625 to 33.75 with dt = 0.125 Time integration of scalars at level 0 from 33.5 to 33.75 with dt = 0.25 using RHS created at 33.66666666667 Making slow rhs at time 33.75 for fast variables advancing from 33.5 to 34 Fast time integration at level 0 from 33.5 to 33.625 with dt = 0.125 Fast time integration at level 0 from 33.625 to 33.75 with dt = 0.125 Fast time integration at level 0 from 33.75 to 33.875 with dt = 0.125 Fast time integration at level 0 from 33.875 to 34 with dt = 0.125 Time integration of scalars at level 0 from 33.5 to 34 with dt = 0.5 using RHS created at 33.75 Done with advance_dycore at level 0 [Level 0 step 68] Advanced 80000 cells Cloud fraction 33.5 1 Coarse STEP 68 ends. TIME = 34 DT = 0.5 Timestep time = 0.42602329 seconds. TIME= 34 MASS = 5.886316959e+10 RHO THETA = 1.82218067e+13 RHO SCALAR = 0 RHO QTOTAL = 1176967054 Coarse STEP 69 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8790061779 (terrain aware) 0.8790061779 (terrain unaware) Anelastic dt at level 0 would be: 77.3252828 (terrain aware) 77.3252828 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 69] ADVANCE from elapsed time = 34 to 34.5 with dt = 0.5 Making slow rhs at time 34 for fast variables advancing from 34 to 34.16666666667 Fast time integration at level 0 from 34 to 34.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 34 to 34.16666666667 with dt = 0.1666666666667 using RHS created at 34 Making slow rhs at time 34.16666666667 for fast variables advancing from 34 to 34.25 Fast time integration at level 0 from 34 to 34.125 with dt = 0.125 Fast time integration at level 0 from 34.125 to 34.25 with dt = 0.125 Time integration of scalars at level 0 from 34 to 34.25 with dt = 0.25 using RHS created at 34.16666666667 Making slow rhs at time 34.25 for fast variables advancing from 34 to 34.5 Fast time integration at level 0 from 34 to 34.125 with dt = 0.125 Fast time integration at level 0 from 34.125 to 34.25 with dt = 0.125 Fast time integration at level 0 from 34.25 to 34.375 with dt = 0.125 Fast time integration at level 0 from 34.375 to 34.5 with dt = 0.125 Time integration of scalars at level 0 from 34 to 34.5 with dt = 0.5 using RHS created at 34.25 Done with advance_dycore at level 0 [Level 0 step 69] Advanced 80000 cells Cloud fraction 34 1 Coarse STEP 69 ends. TIME = 34.5 DT = 0.5 Timestep time = 0.426018231 seconds. TIME= 34.5 MASS = 5.886316959e+10 RHO THETA = 1.822199689e+13 RHO SCALAR = 0 RHO QTOTAL = 1176962551 Coarse STEP 70 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8789503487 (terrain aware) 0.8789503487 (terrain unaware) Anelastic dt at level 0 would be: 76.10939893 (terrain aware) 76.10939893 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 70] ADVANCE from elapsed time = 34.5 to 35 with dt = 0.5 Making slow rhs at time 34.5 for fast variables advancing from 34.5 to 34.66666666667 Fast time integration at level 0 from 34.5 to 34.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 34.5 to 34.66666666667 with dt = 0.1666666666667 using RHS created at 34.5 Making slow rhs at time 34.66666666667 for fast variables advancing from 34.5 to 34.75 Fast time integration at level 0 from 34.5 to 34.625 with dt = 0.125 Fast time integration at level 0 from 34.625 to 34.75 with dt = 0.125 Time integration of scalars at level 0 from 34.5 to 34.75 with dt = 0.25 using RHS created at 34.66666666667 Making slow rhs at time 34.75 for fast variables advancing from 34.5 to 35 Fast time integration at level 0 from 34.5 to 34.625 with dt = 0.125 Fast time integration at level 0 from 34.625 to 34.75 with dt = 0.125 Fast time integration at level 0 from 34.75 to 34.875 with dt = 0.125 Fast time integration at level 0 from 34.875 to 35 with dt = 0.125 Time integration of scalars at level 0 from 34.5 to 35 with dt = 0.5 using RHS created at 34.75 Done with advance_dycore at level 0 [Level 0 step 70] Advanced 80000 cells Cloud fraction 34.5 1 Coarse STEP 70 ends. TIME = 35 DT = 0.5 Timestep time = 0.426085783 seconds. TIME= 35 MASS = 5.886316959e+10 RHO THETA = 1.822218614e+13 RHO SCALAR = 0 RHO QTOTAL = 1176958040 Coarse STEP 71 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8788942679 (terrain aware) 0.8788942679 (terrain unaware) Anelastic dt at level 0 would be: 74.9572858 (terrain aware) 74.9572858 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 71] ADVANCE from elapsed time = 35 to 35.5 with dt = 0.5 Making slow rhs at time 35 for fast variables advancing from 35 to 35.16666666667 Fast time integration at level 0 from 35 to 35.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 35 to 35.16666666667 with dt = 0.1666666666667 using RHS created at 35 Making slow rhs at time 35.16666666667 for fast variables advancing from 35 to 35.25 Fast time integration at level 0 from 35 to 35.125 with dt = 0.125 Fast time integration at level 0 from 35.125 to 35.25 with dt = 0.125 Time integration of scalars at level 0 from 35 to 35.25 with dt = 0.25 using RHS created at 35.16666666667 Making slow rhs at time 35.25 for fast variables advancing from 35 to 35.5 Fast time integration at level 0 from 35 to 35.125 with dt = 0.125 Fast time integration at level 0 from 35.125 to 35.25 with dt = 0.125 Fast time integration at level 0 from 35.25 to 35.375 with dt = 0.125 Fast time integration at level 0 from 35.375 to 35.5 with dt = 0.125 Time integration of scalars at level 0 from 35 to 35.5 with dt = 0.5 using RHS created at 35.25 Done with advance_dycore at level 0 [Level 0 step 71] Advanced 80000 cells Cloud fraction 35 1 Coarse STEP 71 ends. TIME = 35.5 DT = 0.5 Timestep time = 0.425826345 seconds. TIME= 35.5 MASS = 5.886316959e+10 RHO THETA = 1.822237447e+13 RHO SCALAR = 0 RHO QTOTAL = 1176953522 Coarse STEP 72 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8788379927 (terrain aware) 0.8788379927 (terrain unaware) Anelastic dt at level 0 would be: 73.85909357 (terrain aware) 73.85909357 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 72] ADVANCE from elapsed time = 35.5 to 36 with dt = 0.5 Making slow rhs at time 35.5 for fast variables advancing from 35.5 to 35.66666666667 Fast time integration at level 0 from 35.5 to 35.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 35.5 to 35.66666666667 with dt = 0.1666666666667 using RHS created at 35.5 Making slow rhs at time 35.66666666667 for fast variables advancing from 35.5 to 35.75 Fast time integration at level 0 from 35.5 to 35.625 with dt = 0.125 Fast time integration at level 0 from 35.625 to 35.75 with dt = 0.125 Time integration of scalars at level 0 from 35.5 to 35.75 with dt = 0.25 using RHS created at 35.66666666667 Making slow rhs at time 35.75 for fast variables advancing from 35.5 to 36 Fast time integration at level 0 from 35.5 to 35.625 with dt = 0.125 Fast time integration at level 0 from 35.625 to 35.75 with dt = 0.125 Fast time integration at level 0 from 35.75 to 35.875 with dt = 0.125 Fast time integration at level 0 from 35.875 to 36 with dt = 0.125 Time integration of scalars at level 0 from 35.5 to 36 with dt = 0.5 using RHS created at 35.75 Done with advance_dycore at level 0 [Level 0 step 72] Advanced 80000 cells Cloud fraction 35.5 1 Coarse STEP 72 ends. TIME = 36 DT = 0.5 Timestep time = 0.426486939 seconds. TIME= 36 MASS = 5.886316959e+10 RHO THETA = 1.822256189e+13 RHO SCALAR = 0 RHO QTOTAL = 1176948996 Coarse STEP 73 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8787816459 (terrain aware) 0.8787816459 (terrain unaware) Anelastic dt at level 0 would be: 72.81208094 (terrain aware) 72.81208094 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 73] ADVANCE from elapsed time = 36 to 36.5 with dt = 0.5 Making slow rhs at time 36 for fast variables advancing from 36 to 36.16666666667 Fast time integration at level 0 from 36 to 36.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 36 to 36.16666666667 with dt = 0.1666666666667 using RHS created at 36 Making slow rhs at time 36.16666666667 for fast variables advancing from 36 to 36.25 Fast time integration at level 0 from 36 to 36.125 with dt = 0.125 Fast time integration at level 0 from 36.125 to 36.25 with dt = 0.125 Time integration of scalars at level 0 from 36 to 36.25 with dt = 0.25 using RHS created at 36.16666666667 Making slow rhs at time 36.25 for fast variables advancing from 36 to 36.5 Fast time integration at level 0 from 36 to 36.125 with dt = 0.125 Fast time integration at level 0 from 36.125 to 36.25 with dt = 0.125 Fast time integration at level 0 from 36.25 to 36.375 with dt = 0.125 Fast time integration at level 0 from 36.375 to 36.5 with dt = 0.125 Time integration of scalars at level 0 from 36 to 36.5 with dt = 0.5 using RHS created at 36.25 Done with advance_dycore at level 0 [Level 0 step 73] Advanced 80000 cells Cloud fraction 36 1 Coarse STEP 73 ends. TIME = 36.5 DT = 0.5 Timestep time = 0.426893036 seconds. TIME= 36.5 MASS = 5.886316959e+10 RHO THETA = 1.822274831e+13 RHO SCALAR = 0 RHO QTOTAL = 1176944461 Coarse STEP 74 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8787253459 (terrain aware) 0.8787253459 (terrain unaware) Anelastic dt at level 0 would be: 71.81802829 (terrain aware) 71.81802829 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 74] ADVANCE from elapsed time = 36.5 to 37 with dt = 0.5 Making slow rhs at time 36.5 for fast variables advancing from 36.5 to 36.66666666667 Fast time integration at level 0 from 36.5 to 36.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 36.5 to 36.66666666667 with dt = 0.1666666666667 using RHS created at 36.5 Making slow rhs at time 36.66666666667 for fast variables advancing from 36.5 to 36.75 Fast time integration at level 0 from 36.5 to 36.625 with dt = 0.125 Fast time integration at level 0 from 36.625 to 36.75 with dt = 0.125 Time integration of scalars at level 0 from 36.5 to 36.75 with dt = 0.25 using RHS created at 36.66666666667 Making slow rhs at time 36.75 for fast variables advancing from 36.5 to 37 Fast time integration at level 0 from 36.5 to 36.625 with dt = 0.125 Fast time integration at level 0 from 36.625 to 36.75 with dt = 0.125 Fast time integration at level 0 from 36.75 to 36.875 with dt = 0.125 Fast time integration at level 0 from 36.875 to 37 with dt = 0.125 Time integration of scalars at level 0 from 36.5 to 37 with dt = 0.5 using RHS created at 36.75 Done with advance_dycore at level 0 [Level 0 step 74] Advanced 80000 cells Cloud fraction 36.5 1 Coarse STEP 74 ends. TIME = 37 DT = 0.5 Timestep time = 0.426851962 seconds. TIME= 37 MASS = 5.886316959e+10 RHO THETA = 1.822293365e+13 RHO SCALAR = 0 RHO QTOTAL = 1176939919 Coarse STEP 75 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.87866916 (terrain aware) 0.87866916 (terrain unaware) Anelastic dt at level 0 would be: 70.88073443 (terrain aware) 70.88073443 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 75] ADVANCE from elapsed time = 37 to 37.5 with dt = 0.5 Making slow rhs at time 37 for fast variables advancing from 37 to 37.16666666667 Fast time integration at level 0 from 37 to 37.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 37 to 37.16666666667 with dt = 0.1666666666667 using RHS created at 37 Making slow rhs at time 37.16666666667 for fast variables advancing from 37 to 37.25 Fast time integration at level 0 from 37 to 37.125 with dt = 0.125 Fast time integration at level 0 from 37.125 to 37.25 with dt = 0.125 Time integration of scalars at level 0 from 37 to 37.25 with dt = 0.25 using RHS created at 37.16666666667 Making slow rhs at time 37.25 for fast variables advancing from 37 to 37.5 Fast time integration at level 0 from 37 to 37.125 with dt = 0.125 Fast time integration at level 0 from 37.125 to 37.25 with dt = 0.125 Fast time integration at level 0 from 37.25 to 37.375 with dt = 0.125 Fast time integration at level 0 from 37.375 to 37.5 with dt = 0.125 Time integration of scalars at level 0 from 37 to 37.5 with dt = 0.5 using RHS created at 37.25 Done with advance_dycore at level 0 [Level 0 step 75] Advanced 80000 cells Cloud fraction 37 1 Coarse STEP 75 ends. TIME = 37.5 DT = 0.5 Timestep time = 0.42598174 seconds. TIME= 37.5 MASS = 5.886316959e+10 RHO THETA = 1.822311784e+13 RHO SCALAR = 0 RHO QTOTAL = 1176935369 Coarse STEP 76 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.878613103 (terrain aware) 0.878613103 (terrain unaware) Anelastic dt at level 0 would be: 70.00260585 (terrain aware) 70.00260585 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 76] ADVANCE from elapsed time = 37.5 to 38 with dt = 0.5 Making slow rhs at time 37.5 for fast variables advancing from 37.5 to 37.66666666667 Fast time integration at level 0 from 37.5 to 37.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 37.5 to 37.66666666667 with dt = 0.1666666666667 using RHS created at 37.5 Making slow rhs at time 37.66666666667 for fast variables advancing from 37.5 to 37.75 Fast time integration at level 0 from 37.5 to 37.625 with dt = 0.125 Fast time integration at level 0 from 37.625 to 37.75 with dt = 0.125 Time integration of scalars at level 0 from 37.5 to 37.75 with dt = 0.25 using RHS created at 37.66666666667 Making slow rhs at time 37.75 for fast variables advancing from 37.5 to 38 Fast time integration at level 0 from 37.5 to 37.625 with dt = 0.125 Fast time integration at level 0 from 37.625 to 37.75 with dt = 0.125 Fast time integration at level 0 from 37.75 to 37.875 with dt = 0.125 Fast time integration at level 0 from 37.875 to 38 with dt = 0.125 Time integration of scalars at level 0 from 37.5 to 38 with dt = 0.5 using RHS created at 37.75 Done with advance_dycore at level 0 [Level 0 step 76] Advanced 80000 cells Cloud fraction 37.5 1 Coarse STEP 76 ends. TIME = 38 DT = 0.5 Timestep time = 0.426719599 seconds. TIME= 38 MASS = 5.886316959e+10 RHO THETA = 1.822330088e+13 RHO SCALAR = 0 RHO QTOTAL = 1176930811 Coarse STEP 77 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8785571746 (terrain aware) 0.8785571746 (terrain unaware) Anelastic dt at level 0 would be: 69.18650059 (terrain aware) 69.18650059 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 77] ADVANCE from elapsed time = 38 to 38.5 with dt = 0.5 Making slow rhs at time 38 for fast variables advancing from 38 to 38.16666666667 Fast time integration at level 0 from 38 to 38.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 38 to 38.16666666667 with dt = 0.1666666666667 using RHS created at 38 Making slow rhs at time 38.16666666667 for fast variables advancing from 38 to 38.25 Fast time integration at level 0 from 38 to 38.125 with dt = 0.125 Fast time integration at level 0 from 38.125 to 38.25 with dt = 0.125 Time integration of scalars at level 0 from 38 to 38.25 with dt = 0.25 using RHS created at 38.16666666667 Making slow rhs at time 38.25 for fast variables advancing from 38 to 38.5 Fast time integration at level 0 from 38 to 38.125 with dt = 0.125 Fast time integration at level 0 from 38.125 to 38.25 with dt = 0.125 Fast time integration at level 0 from 38.25 to 38.375 with dt = 0.125 Fast time integration at level 0 from 38.375 to 38.5 with dt = 0.125 Time integration of scalars at level 0 from 38 to 38.5 with dt = 0.5 using RHS created at 38.25 Done with advance_dycore at level 0 [Level 0 step 77] Advanced 80000 cells Cloud fraction 38 1 Coarse STEP 77 ends. TIME = 38.5 DT = 0.5 Timestep time = 0.426008285 seconds. TIME= 38.5 MASS = 5.886316959e+10 RHO THETA = 1.822348359e+13 RHO SCALAR = 0 RHO QTOTAL = 1176926243 Coarse STEP 78 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8785013908 (terrain aware) 0.8785013908 (terrain unaware) Anelastic dt at level 0 would be: 68.43799063 (terrain aware) 68.43799063 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 78] ADVANCE from elapsed time = 38.5 to 39 with dt = 0.5 Making slow rhs at time 38.5 for fast variables advancing from 38.5 to 38.66666666667 Fast time integration at level 0 from 38.5 to 38.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 38.5 to 38.66666666667 with dt = 0.1666666666667 using RHS created at 38.5 Making slow rhs at time 38.66666666667 for fast variables advancing from 38.5 to 38.75 Fast time integration at level 0 from 38.5 to 38.625 with dt = 0.125 Fast time integration at level 0 from 38.625 to 38.75 with dt = 0.125 Time integration of scalars at level 0 from 38.5 to 38.75 with dt = 0.25 using RHS created at 38.66666666667 Making slow rhs at time 38.75 for fast variables advancing from 38.5 to 39 Fast time integration at level 0 from 38.5 to 38.625 with dt = 0.125 Fast time integration at level 0 from 38.625 to 38.75 with dt = 0.125 Fast time integration at level 0 from 38.75 to 38.875 with dt = 0.125 Fast time integration at level 0 from 38.875 to 39 with dt = 0.125 Time integration of scalars at level 0 from 38.5 to 39 with dt = 0.5 using RHS created at 38.75 Done with advance_dycore at level 0 [Level 0 step 78] Advanced 80000 cells Cloud fraction 38.5 1 Coarse STEP 78 ends. TIME = 39 DT = 0.5 Timestep time = 0.4255348 seconds. TIME= 39 MASS = 5.886316959e+10 RHO THETA = 1.822367299e+13 RHO SCALAR = 0 RHO QTOTAL = 1176921663 Coarse STEP 79 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.878445758 (terrain aware) 0.878445758 (terrain unaware) Anelastic dt at level 0 would be: 67.76469953 (terrain aware) 67.76469953 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 79] ADVANCE from elapsed time = 39 to 39.5 with dt = 0.5 Making slow rhs at time 39 for fast variables advancing from 39 to 39.16666666667 Fast time integration at level 0 from 39 to 39.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 39 to 39.16666666667 with dt = 0.1666666666667 using RHS created at 39 Making slow rhs at time 39.16666666667 for fast variables advancing from 39 to 39.25 Fast time integration at level 0 from 39 to 39.125 with dt = 0.125 Fast time integration at level 0 from 39.125 to 39.25 with dt = 0.125 Time integration of scalars at level 0 from 39 to 39.25 with dt = 0.25 using RHS created at 39.16666666667 Making slow rhs at time 39.25 for fast variables advancing from 39 to 39.5 Fast time integration at level 0 from 39 to 39.125 with dt = 0.125 Fast time integration at level 0 from 39.125 to 39.25 with dt = 0.125 Fast time integration at level 0 from 39.25 to 39.375 with dt = 0.125 Fast time integration at level 0 from 39.375 to 39.5 with dt = 0.125 Time integration of scalars at level 0 from 39 to 39.5 with dt = 0.5 using RHS created at 39.25 Done with advance_dycore at level 0 [Level 0 step 79] Advanced 80000 cells Cloud fraction 39 1 Coarse STEP 79 ends. TIME = 39.5 DT = 0.5 Timestep time = 0.425999317 seconds. TIME= 39.5 MASS = 5.886316959e+10 RHO THETA = 1.822386083e+13 RHO SCALAR = 0 RHO QTOTAL = 1176917070 Coarse STEP 80 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8783901967 (terrain aware) 0.8783901967 (terrain unaware) Anelastic dt at level 0 would be: 67.16823703 (terrain aware) 67.16823703 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 80] ADVANCE from elapsed time = 39.5 to 40 with dt = 0.5 Making slow rhs at time 39.5 for fast variables advancing from 39.5 to 39.66666666667 Fast time integration at level 0 from 39.5 to 39.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 39.5 to 39.66666666667 with dt = 0.1666666666667 using RHS created at 39.5 Making slow rhs at time 39.66666666667 for fast variables advancing from 39.5 to 39.75 Fast time integration at level 0 from 39.5 to 39.625 with dt = 0.125 Fast time integration at level 0 from 39.625 to 39.75 with dt = 0.125 Time integration of scalars at level 0 from 39.5 to 39.75 with dt = 0.25 using RHS created at 39.66666666667 Making slow rhs at time 39.75 for fast variables advancing from 39.5 to 40 Fast time integration at level 0 from 39.5 to 39.625 with dt = 0.125 Fast time integration at level 0 from 39.625 to 39.75 with dt = 0.125 Fast time integration at level 0 from 39.75 to 39.875 with dt = 0.125 Fast time integration at level 0 from 39.875 to 40 with dt = 0.125 Time integration of scalars at level 0 from 39.5 to 40 with dt = 0.5 using RHS created at 39.75 Done with advance_dycore at level 0 [Level 0 step 80] Advanced 80000 cells Cloud fraction 39.5 1 Coarse STEP 80 ends. TIME = 40 DT = 0.5 Timestep time = 0.426843935 seconds. TIME= 40 MASS = 5.886316959e+10 RHO THETA = 1.82240472e+13 RHO SCALAR = 0 RHO QTOTAL = 1176912464 Coarse STEP 81 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8783345644 (terrain aware) 0.8783345644 (terrain unaware) Anelastic dt at level 0 would be: 66.63896044 (terrain aware) 66.63896044 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 81] ADVANCE from elapsed time = 40 to 40.5 with dt = 0.5 Making slow rhs at time 40 for fast variables advancing from 40 to 40.16666666667 Fast time integration at level 0 from 40 to 40.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 40 to 40.16666666667 with dt = 0.1666666666667 using RHS created at 40 Making slow rhs at time 40.16666666667 for fast variables advancing from 40 to 40.25 Fast time integration at level 0 from 40 to 40.125 with dt = 0.125 Fast time integration at level 0 from 40.125 to 40.25 with dt = 0.125 Time integration of scalars at level 0 from 40 to 40.25 with dt = 0.25 using RHS created at 40.16666666667 Making slow rhs at time 40.25 for fast variables advancing from 40 to 40.5 Fast time integration at level 0 from 40 to 40.125 with dt = 0.125 Fast time integration at level 0 from 40.125 to 40.25 with dt = 0.125 Fast time integration at level 0 from 40.25 to 40.375 with dt = 0.125 Fast time integration at level 0 from 40.375 to 40.5 with dt = 0.125 Time integration of scalars at level 0 from 40 to 40.5 with dt = 0.5 using RHS created at 40.25 Done with advance_dycore at level 0 [Level 0 step 81] Advanced 80000 cells Cloud fraction 40 1 Coarse STEP 81 ends. TIME = 40.5 DT = 0.5 Timestep time = 0.42631931 seconds. TIME= 40.5 MASS = 5.886316959e+10 RHO THETA = 1.822423199e+13 RHO SCALAR = 0 RHO QTOTAL = 1176907842 Coarse STEP 82 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8782787957 (terrain aware) 0.8782787957 (terrain unaware) Anelastic dt at level 0 would be: 66.15848316 (terrain aware) 66.15848316 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 82] ADVANCE from elapsed time = 40.5 to 41 with dt = 0.5 Making slow rhs at time 40.5 for fast variables advancing from 40.5 to 40.66666666667 Fast time integration at level 0 from 40.5 to 40.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 40.5 to 40.66666666667 with dt = 0.1666666666667 using RHS created at 40.5 Making slow rhs at time 40.66666666667 for fast variables advancing from 40.5 to 40.75 Fast time integration at level 0 from 40.5 to 40.625 with dt = 0.125 Fast time integration at level 0 from 40.625 to 40.75 with dt = 0.125 Time integration of scalars at level 0 from 40.5 to 40.75 with dt = 0.25 using RHS created at 40.66666666667 Making slow rhs at time 40.75 for fast variables advancing from 40.5 to 41 Fast time integration at level 0 from 40.5 to 40.625 with dt = 0.125 Fast time integration at level 0 from 40.625 to 40.75 with dt = 0.125 Fast time integration at level 0 from 40.75 to 40.875 with dt = 0.125 Fast time integration at level 0 from 40.875 to 41 with dt = 0.125 Time integration of scalars at level 0 from 40.5 to 41 with dt = 0.5 using RHS created at 40.75 Done with advance_dycore at level 0 [Level 0 step 82] Advanced 80000 cells Cloud fraction 40.5 1 Coarse STEP 82 ends. TIME = 41 DT = 0.5 Timestep time = 0.425536871 seconds. TIME= 41 MASS = 5.886316959e+10 RHO THETA = 1.822441529e+13 RHO SCALAR = 0 RHO QTOTAL = 1176903205 Coarse STEP 83 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8782229546 (terrain aware) 0.8782229546 (terrain unaware) Anelastic dt at level 0 would be: 65.70759725 (terrain aware) 65.70759725 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 83] ADVANCE from elapsed time = 41 to 41.5 with dt = 0.5 Making slow rhs at time 41 for fast variables advancing from 41 to 41.16666666667 Fast time integration at level 0 from 41 to 41.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 41 to 41.16666666667 with dt = 0.1666666666667 using RHS created at 41 Making slow rhs at time 41.16666666667 for fast variables advancing from 41 to 41.25 Fast time integration at level 0 from 41 to 41.125 with dt = 0.125 Fast time integration at level 0 from 41.125 to 41.25 with dt = 0.125 Time integration of scalars at level 0 from 41 to 41.25 with dt = 0.25 using RHS created at 41.16666666667 Making slow rhs at time 41.25 for fast variables advancing from 41 to 41.5 Fast time integration at level 0 from 41 to 41.125 with dt = 0.125 Fast time integration at level 0 from 41.125 to 41.25 with dt = 0.125 Fast time integration at level 0 from 41.25 to 41.375 with dt = 0.125 Fast time integration at level 0 from 41.375 to 41.5 with dt = 0.125 Time integration of scalars at level 0 from 41 to 41.5 with dt = 0.5 using RHS created at 41.25 Done with advance_dycore at level 0 [Level 0 step 83] Advanced 80000 cells Cloud fraction 41 1 Coarse STEP 83 ends. TIME = 41.5 DT = 0.5 Timestep time = 0.425840217 seconds. TIME= 41.5 MASS = 5.886316959e+10 RHO THETA = 1.82245971e+13 RHO SCALAR = 0 RHO QTOTAL = 1176898554 Coarse STEP 84 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8781671118 (terrain aware) 0.8781671118 (terrain unaware) Anelastic dt at level 0 would be: 65.26799936 (terrain aware) 65.26799936 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 84] ADVANCE from elapsed time = 41.5 to 42 with dt = 0.5 Making slow rhs at time 41.5 for fast variables advancing from 41.5 to 41.66666666667 Fast time integration at level 0 from 41.5 to 41.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 41.5 to 41.66666666667 with dt = 0.1666666666667 using RHS created at 41.5 Making slow rhs at time 41.66666666667 for fast variables advancing from 41.5 to 41.75 Fast time integration at level 0 from 41.5 to 41.625 with dt = 0.125 Fast time integration at level 0 from 41.625 to 41.75 with dt = 0.125 Time integration of scalars at level 0 from 41.5 to 41.75 with dt = 0.25 using RHS created at 41.66666666667 Making slow rhs at time 41.75 for fast variables advancing from 41.5 to 42 Fast time integration at level 0 from 41.5 to 41.625 with dt = 0.125 Fast time integration at level 0 from 41.625 to 41.75 with dt = 0.125 Fast time integration at level 0 from 41.75 to 41.875 with dt = 0.125 Fast time integration at level 0 from 41.875 to 42 with dt = 0.125 Time integration of scalars at level 0 from 41.5 to 42 with dt = 0.5 using RHS created at 41.75 Done with advance_dycore at level 0 [Level 0 step 84] Advanced 80000 cells Cloud fraction 41.5 1 Coarse STEP 84 ends. TIME = 42 DT = 0.5 Timestep time = 0.425636953 seconds. TIME= 42 MASS = 5.886316959e+10 RHO THETA = 1.822477745e+13 RHO SCALAR = 0 RHO QTOTAL = 1176893889 Coarse STEP 85 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8781112479 (terrain aware) 0.8781112479 (terrain unaware) Anelastic dt at level 0 would be: 64.82068628 (terrain aware) 64.82068628 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 85] ADVANCE from elapsed time = 42 to 42.5 with dt = 0.5 Making slow rhs at time 42 for fast variables advancing from 42 to 42.16666666667 Fast time integration at level 0 from 42 to 42.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 42 to 42.16666666667 with dt = 0.1666666666667 using RHS created at 42 Making slow rhs at time 42.16666666667 for fast variables advancing from 42 to 42.25 Fast time integration at level 0 from 42 to 42.125 with dt = 0.125 Fast time integration at level 0 from 42.125 to 42.25 with dt = 0.125 Time integration of scalars at level 0 from 42 to 42.25 with dt = 0.25 using RHS created at 42.16666666667 Making slow rhs at time 42.25 for fast variables advancing from 42 to 42.5 Fast time integration at level 0 from 42 to 42.125 with dt = 0.125 Fast time integration at level 0 from 42.125 to 42.25 with dt = 0.125 Fast time integration at level 0 from 42.25 to 42.375 with dt = 0.125 Fast time integration at level 0 from 42.375 to 42.5 with dt = 0.125 Time integration of scalars at level 0 from 42 to 42.5 with dt = 0.5 using RHS created at 42.25 Done with advance_dycore at level 0 [Level 0 step 85] Advanced 80000 cells Cloud fraction 42 1 Coarse STEP 85 ends. TIME = 42.5 DT = 0.5 Timestep time = 0.426045209 seconds. TIME= 42.5 MASS = 5.886316959e+10 RHO THETA = 1.822495645e+13 RHO SCALAR = 0 RHO QTOTAL = 1176889209 Coarse STEP 86 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8780552927 (terrain aware) 0.8780552927 (terrain unaware) Anelastic dt at level 0 would be: 64.34783818 (terrain aware) 64.34783818 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 86] ADVANCE from elapsed time = 42.5 to 43 with dt = 0.5 Making slow rhs at time 42.5 for fast variables advancing from 42.5 to 42.66666666667 Fast time integration at level 0 from 42.5 to 42.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 42.5 to 42.66666666667 with dt = 0.1666666666667 using RHS created at 42.5 Making slow rhs at time 42.66666666667 for fast variables advancing from 42.5 to 42.75 Fast time integration at level 0 from 42.5 to 42.625 with dt = 0.125 Fast time integration at level 0 from 42.625 to 42.75 with dt = 0.125 Time integration of scalars at level 0 from 42.5 to 42.75 with dt = 0.25 using RHS created at 42.66666666667 Making slow rhs at time 42.75 for fast variables advancing from 42.5 to 43 Fast time integration at level 0 from 42.5 to 42.625 with dt = 0.125 Fast time integration at level 0 from 42.625 to 42.75 with dt = 0.125 Fast time integration at level 0 from 42.75 to 42.875 with dt = 0.125 Fast time integration at level 0 from 42.875 to 43 with dt = 0.125 Time integration of scalars at level 0 from 42.5 to 43 with dt = 0.5 using RHS created at 42.75 Done with advance_dycore at level 0 [Level 0 step 86] Advanced 80000 cells Cloud fraction 42.5 1 Coarse STEP 86 ends. TIME = 43 DT = 0.5 Timestep time = 0.426393705 seconds. TIME= 43 MASS = 5.886316959e+10 RHO THETA = 1.82251342e+13 RHO SCALAR = 0 RHO QTOTAL = 1176884514 Coarse STEP 87 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8779992235 (terrain aware) 0.8779992235 (terrain unaware) Anelastic dt at level 0 would be: 63.83684568 (terrain aware) 63.83684568 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 87] ADVANCE from elapsed time = 43 to 43.5 with dt = 0.5 Making slow rhs at time 43 for fast variables advancing from 43 to 43.16666666667 Fast time integration at level 0 from 43 to 43.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 43 to 43.16666666667 with dt = 0.1666666666667 using RHS created at 43 Making slow rhs at time 43.16666666667 for fast variables advancing from 43 to 43.25 Fast time integration at level 0 from 43 to 43.125 with dt = 0.125 Fast time integration at level 0 from 43.125 to 43.25 with dt = 0.125 Time integration of scalars at level 0 from 43 to 43.25 with dt = 0.25 using RHS created at 43.16666666667 Making slow rhs at time 43.25 for fast variables advancing from 43 to 43.5 Fast time integration at level 0 from 43 to 43.125 with dt = 0.125 Fast time integration at level 0 from 43.125 to 43.25 with dt = 0.125 Fast time integration at level 0 from 43.25 to 43.375 with dt = 0.125 Fast time integration at level 0 from 43.375 to 43.5 with dt = 0.125 Time integration of scalars at level 0 from 43 to 43.5 with dt = 0.5 using RHS created at 43.25 Done with advance_dycore at level 0 [Level 0 step 87] Advanced 80000 cells Cloud fraction 43 1 Coarse STEP 87 ends. TIME = 43.5 DT = 0.5 Timestep time = 0.426462457 seconds. TIME= 43.5 MASS = 5.886316959e+10 RHO THETA = 1.822531079e+13 RHO SCALAR = 0 RHO QTOTAL = 1176879802 Coarse STEP 88 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.877943115 (terrain aware) 0.877943115 (terrain unaware) Anelastic dt at level 0 would be: 63.27795434 (terrain aware) 63.27795434 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 88] ADVANCE from elapsed time = 43.5 to 44 with dt = 0.5 Making slow rhs at time 43.5 for fast variables advancing from 43.5 to 43.66666666667 Fast time integration at level 0 from 43.5 to 43.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 43.5 to 43.66666666667 with dt = 0.1666666666667 using RHS created at 43.5 Making slow rhs at time 43.66666666667 for fast variables advancing from 43.5 to 43.75 Fast time integration at level 0 from 43.5 to 43.625 with dt = 0.125 Fast time integration at level 0 from 43.625 to 43.75 with dt = 0.125 Time integration of scalars at level 0 from 43.5 to 43.75 with dt = 0.25 using RHS created at 43.66666666667 Making slow rhs at time 43.75 for fast variables advancing from 43.5 to 44 Fast time integration at level 0 from 43.5 to 43.625 with dt = 0.125 Fast time integration at level 0 from 43.625 to 43.75 with dt = 0.125 Fast time integration at level 0 from 43.75 to 43.875 with dt = 0.125 Fast time integration at level 0 from 43.875 to 44 with dt = 0.125 Time integration of scalars at level 0 from 43.5 to 44 with dt = 0.5 using RHS created at 43.75 Done with advance_dycore at level 0 [Level 0 step 88] Advanced 80000 cells Cloud fraction 43.5 1 Coarse STEP 88 ends. TIME = 44 DT = 0.5 Timestep time = 0.425676979 seconds. TIME= 44 MASS = 5.886316959e+10 RHO THETA = 1.822548622e+13 RHO SCALAR = 0 RHO QTOTAL = 1176875073 Coarse STEP 89 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8778870808 (terrain aware) 0.8778870808 (terrain unaware) Anelastic dt at level 0 would be: 62.66223659 (terrain aware) 62.66223659 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 89] ADVANCE from elapsed time = 44 to 44.5 with dt = 0.5 Making slow rhs at time 44 for fast variables advancing from 44 to 44.16666666667 Fast time integration at level 0 from 44 to 44.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 44 to 44.16666666667 with dt = 0.1666666666667 using RHS created at 44 Making slow rhs at time 44.16666666667 for fast variables advancing from 44 to 44.25 Fast time integration at level 0 from 44 to 44.125 with dt = 0.125 Fast time integration at level 0 from 44.125 to 44.25 with dt = 0.125 Time integration of scalars at level 0 from 44 to 44.25 with dt = 0.25 using RHS created at 44.16666666667 Making slow rhs at time 44.25 for fast variables advancing from 44 to 44.5 Fast time integration at level 0 from 44 to 44.125 with dt = 0.125 Fast time integration at level 0 from 44.125 to 44.25 with dt = 0.125 Fast time integration at level 0 from 44.25 to 44.375 with dt = 0.125 Fast time integration at level 0 from 44.375 to 44.5 with dt = 0.125 Time integration of scalars at level 0 from 44 to 44.5 with dt = 0.5 using RHS created at 44.25 Done with advance_dycore at level 0 [Level 0 step 89] Advanced 80000 cells Cloud fraction 44 1 Coarse STEP 89 ends. TIME = 44.5 DT = 0.5 Timestep time = 0.425428447 seconds. TIME= 44.5 MASS = 5.886316959e+10 RHO THETA = 1.82256605e+13 RHO SCALAR = 0 RHO QTOTAL = 1176870327 Coarse STEP 90 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8778311687 (terrain aware) 0.8778311687 (terrain unaware) Anelastic dt at level 0 would be: 61.98730824 (terrain aware) 61.98730824 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 90] ADVANCE from elapsed time = 44.5 to 45 with dt = 0.5 Making slow rhs at time 44.5 for fast variables advancing from 44.5 to 44.66666666667 Fast time integration at level 0 from 44.5 to 44.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 44.5 to 44.66666666667 with dt = 0.1666666666667 using RHS created at 44.5 Making slow rhs at time 44.66666666667 for fast variables advancing from 44.5 to 44.75 Fast time integration at level 0 from 44.5 to 44.625 with dt = 0.125 Fast time integration at level 0 from 44.625 to 44.75 with dt = 0.125 Time integration of scalars at level 0 from 44.5 to 44.75 with dt = 0.25 using RHS created at 44.66666666667 Making slow rhs at time 44.75 for fast variables advancing from 44.5 to 45 Fast time integration at level 0 from 44.5 to 44.625 with dt = 0.125 Fast time integration at level 0 from 44.625 to 44.75 with dt = 0.125 Fast time integration at level 0 from 44.75 to 44.875 with dt = 0.125 Fast time integration at level 0 from 44.875 to 45 with dt = 0.125 Time integration of scalars at level 0 from 44.5 to 45 with dt = 0.5 using RHS created at 44.75 Done with advance_dycore at level 0 [Level 0 step 90] Advanced 80000 cells Cloud fraction 44.5 1 Coarse STEP 90 ends. TIME = 45 DT = 0.5 Timestep time = 0.425205053 seconds. TIME= 45 MASS = 5.886316959e+10 RHO THETA = 1.822583346e+13 RHO SCALAR = 0 RHO QTOTAL = 1176865562 Coarse STEP 91 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8777753278 (terrain aware) 0.8777753278 (terrain unaware) Anelastic dt at level 0 would be: 61.26529081 (terrain aware) 61.26529081 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 91] ADVANCE from elapsed time = 45 to 45.5 with dt = 0.5 Making slow rhs at time 45 for fast variables advancing from 45 to 45.16666666667 Fast time integration at level 0 from 45 to 45.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 45 to 45.16666666667 with dt = 0.1666666666667 using RHS created at 45 Making slow rhs at time 45.16666666667 for fast variables advancing from 45 to 45.25 Fast time integration at level 0 from 45 to 45.125 with dt = 0.125 Fast time integration at level 0 from 45.125 to 45.25 with dt = 0.125 Time integration of scalars at level 0 from 45 to 45.25 with dt = 0.25 using RHS created at 45.16666666667 Making slow rhs at time 45.25 for fast variables advancing from 45 to 45.5 Fast time integration at level 0 from 45 to 45.125 with dt = 0.125 Fast time integration at level 0 from 45.125 to 45.25 with dt = 0.125 Fast time integration at level 0 from 45.25 to 45.375 with dt = 0.125 Fast time integration at level 0 from 45.375 to 45.5 with dt = 0.125 Time integration of scalars at level 0 from 45 to 45.5 with dt = 0.5 using RHS created at 45.25 Done with advance_dycore at level 0 [Level 0 step 91] Advanced 80000 cells Cloud fraction 45 1 Coarse STEP 91 ends. TIME = 45.5 DT = 0.5 Timestep time = 0.425180107 seconds. TIME= 45.5 MASS = 5.886316959e+10 RHO THETA = 1.822600516e+13 RHO SCALAR = 0 RHO QTOTAL = 1176860780 Coarse STEP 92 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8777193892 (terrain aware) 0.8777193892 (terrain unaware) Anelastic dt at level 0 would be: 60.52219939 (terrain aware) 60.52219939 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 92] ADVANCE from elapsed time = 45.5 to 46 with dt = 0.5 Making slow rhs at time 45.5 for fast variables advancing from 45.5 to 45.66666666667 Fast time integration at level 0 from 45.5 to 45.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 45.5 to 45.66666666667 with dt = 0.1666666666667 using RHS created at 45.5 Making slow rhs at time 45.66666666667 for fast variables advancing from 45.5 to 45.75 Fast time integration at level 0 from 45.5 to 45.625 with dt = 0.125 Fast time integration at level 0 from 45.625 to 45.75 with dt = 0.125 Time integration of scalars at level 0 from 45.5 to 45.75 with dt = 0.25 using RHS created at 45.66666666667 Making slow rhs at time 45.75 for fast variables advancing from 45.5 to 46 Fast time integration at level 0 from 45.5 to 45.625 with dt = 0.125 Fast time integration at level 0 from 45.625 to 45.75 with dt = 0.125 Fast time integration at level 0 from 45.75 to 45.875 with dt = 0.125 Fast time integration at level 0 from 45.875 to 46 with dt = 0.125 Time integration of scalars at level 0 from 45.5 to 46 with dt = 0.5 using RHS created at 45.75 Done with advance_dycore at level 0 [Level 0 step 92] Advanced 80000 cells Cloud fraction 45.5 1 Coarse STEP 92 ends. TIME = 46 DT = 0.5 Timestep time = 0.426124534 seconds. TIME= 46 MASS = 5.886316959e+10 RHO THETA = 1.822617559e+13 RHO SCALAR = 0 RHO QTOTAL = 1176855978 Coarse STEP 93 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8776630412 (terrain aware) 0.8776630412 (terrain unaware) Anelastic dt at level 0 would be: 59.79000014 (terrain aware) 59.79000014 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 93] ADVANCE from elapsed time = 46 to 46.5 with dt = 0.5 Making slow rhs at time 46 for fast variables advancing from 46 to 46.16666666667 Fast time integration at level 0 from 46 to 46.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 46 to 46.16666666667 with dt = 0.1666666666667 using RHS created at 46 Making slow rhs at time 46.16666666667 for fast variables advancing from 46 to 46.25 Fast time integration at level 0 from 46 to 46.125 with dt = 0.125 Fast time integration at level 0 from 46.125 to 46.25 with dt = 0.125 Time integration of scalars at level 0 from 46 to 46.25 with dt = 0.25 using RHS created at 46.16666666667 Making slow rhs at time 46.25 for fast variables advancing from 46 to 46.5 Fast time integration at level 0 from 46 to 46.125 with dt = 0.125 Fast time integration at level 0 from 46.125 to 46.25 with dt = 0.125 Fast time integration at level 0 from 46.25 to 46.375 with dt = 0.125 Fast time integration at level 0 from 46.375 to 46.5 with dt = 0.125 Time integration of scalars at level 0 from 46 to 46.5 with dt = 0.5 using RHS created at 46.25 Done with advance_dycore at level 0 [Level 0 step 93] Advanced 80000 cells Cloud fraction 46 1 Coarse STEP 93 ends. TIME = 46.5 DT = 0.5 Timestep time = 0.425054369 seconds. TIME= 46.5 MASS = 5.886316959e+10 RHO THETA = 1.822634651e+13 RHO SCALAR = 0 RHO QTOTAL = 1176851157 Coarse STEP 94 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8776059539 (terrain aware) 0.8776059539 (terrain unaware) Anelastic dt at level 0 would be: 59.09454661 (terrain aware) 59.09454661 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 94] ADVANCE from elapsed time = 46.5 to 47 with dt = 0.5 Making slow rhs at time 46.5 for fast variables advancing from 46.5 to 46.66666666667 Fast time integration at level 0 from 46.5 to 46.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 46.5 to 46.66666666667 with dt = 0.1666666666667 using RHS created at 46.5 Making slow rhs at time 46.66666666667 for fast variables advancing from 46.5 to 46.75 Fast time integration at level 0 from 46.5 to 46.625 with dt = 0.125 Fast time integration at level 0 from 46.625 to 46.75 with dt = 0.125 Time integration of scalars at level 0 from 46.5 to 46.75 with dt = 0.25 using RHS created at 46.66666666667 Making slow rhs at time 46.75 for fast variables advancing from 46.5 to 47 Fast time integration at level 0 from 46.5 to 46.625 with dt = 0.125 Fast time integration at level 0 from 46.625 to 46.75 with dt = 0.125 Fast time integration at level 0 from 46.75 to 46.875 with dt = 0.125 Fast time integration at level 0 from 46.875 to 47 with dt = 0.125 Time integration of scalars at level 0 from 46.5 to 47 with dt = 0.5 using RHS created at 46.75 Done with advance_dycore at level 0 [Level 0 step 94] Advanced 80000 cells Cloud fraction 46.5 1 Coarse STEP 94 ends. TIME = 47 DT = 0.5 Timestep time = 0.425593362 seconds. TIME= 47 MASS = 5.886316959e+10 RHO THETA = 1.822652119e+13 RHO SCALAR = 0 RHO QTOTAL = 1176846313 Coarse STEP 95 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8775480427 (terrain aware) 0.8775480427 (terrain unaware) Anelastic dt at level 0 would be: 58.44680986 (terrain aware) 58.44680986 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 95] ADVANCE from elapsed time = 47 to 47.5 with dt = 0.5 Making slow rhs at time 47 for fast variables advancing from 47 to 47.16666666667 Fast time integration at level 0 from 47 to 47.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 47 to 47.16666666667 with dt = 0.1666666666667 using RHS created at 47 Making slow rhs at time 47.16666666667 for fast variables advancing from 47 to 47.25 Fast time integration at level 0 from 47 to 47.125 with dt = 0.125 Fast time integration at level 0 from 47.125 to 47.25 with dt = 0.125 Time integration of scalars at level 0 from 47 to 47.25 with dt = 0.25 using RHS created at 47.16666666667 Making slow rhs at time 47.25 for fast variables advancing from 47 to 47.5 Fast time integration at level 0 from 47 to 47.125 with dt = 0.125 Fast time integration at level 0 from 47.125 to 47.25 with dt = 0.125 Fast time integration at level 0 from 47.25 to 47.375 with dt = 0.125 Fast time integration at level 0 from 47.375 to 47.5 with dt = 0.125 Time integration of scalars at level 0 from 47 to 47.5 with dt = 0.5 using RHS created at 47.25 Done with advance_dycore at level 0 [Level 0 step 95] Advanced 80000 cells Cloud fraction 47 1 Coarse STEP 95 ends. TIME = 47.5 DT = 0.5 Timestep time = 0.425654066 seconds. TIME= 47.5 MASS = 5.886316959e+10 RHO THETA = 1.822669466e+13 RHO SCALAR = 0 RHO QTOTAL = 1176841446 Coarse STEP 96 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8774895514 (terrain aware) 0.8774895514 (terrain unaware) Anelastic dt at level 0 would be: 57.8447004 (terrain aware) 57.8447004 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 96] ADVANCE from elapsed time = 47.5 to 48 with dt = 0.5 Making slow rhs at time 47.5 for fast variables advancing from 47.5 to 47.66666666667 Fast time integration at level 0 from 47.5 to 47.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 47.5 to 47.66666666667 with dt = 0.1666666666667 using RHS created at 47.5 Making slow rhs at time 47.66666666667 for fast variables advancing from 47.5 to 47.75 Fast time integration at level 0 from 47.5 to 47.625 with dt = 0.125 Fast time integration at level 0 from 47.625 to 47.75 with dt = 0.125 Time integration of scalars at level 0 from 47.5 to 47.75 with dt = 0.25 using RHS created at 47.66666666667 Making slow rhs at time 47.75 for fast variables advancing from 47.5 to 48 Fast time integration at level 0 from 47.5 to 47.625 with dt = 0.125 Fast time integration at level 0 from 47.625 to 47.75 with dt = 0.125 Fast time integration at level 0 from 47.75 to 47.875 with dt = 0.125 Fast time integration at level 0 from 47.875 to 48 with dt = 0.125 Time integration of scalars at level 0 from 47.5 to 48 with dt = 0.5 using RHS created at 47.75 Done with advance_dycore at level 0 [Level 0 step 96] Advanced 80000 cells Cloud fraction 47.5 1 Coarse STEP 96 ends. TIME = 48 DT = 0.5 Timestep time = 0.424355713 seconds. TIME= 48 MASS = 5.886316959e+10 RHO THETA = 1.822686691e+13 RHO SCALAR = 0 RHO QTOTAL = 1176836554 Coarse STEP 97 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8774308575 (terrain aware) 0.8774308575 (terrain unaware) Anelastic dt at level 0 would be: 57.28011217 (terrain aware) 57.28011217 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 97] ADVANCE from elapsed time = 48 to 48.5 with dt = 0.5 Making slow rhs at time 48 for fast variables advancing from 48 to 48.16666666667 Fast time integration at level 0 from 48 to 48.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 48 to 48.16666666667 with dt = 0.1666666666667 using RHS created at 48 Making slow rhs at time 48.16666666667 for fast variables advancing from 48 to 48.25 Fast time integration at level 0 from 48 to 48.125 with dt = 0.125 Fast time integration at level 0 from 48.125 to 48.25 with dt = 0.125 Time integration of scalars at level 0 from 48 to 48.25 with dt = 0.25 using RHS created at 48.16666666667 Making slow rhs at time 48.25 for fast variables advancing from 48 to 48.5 Fast time integration at level 0 from 48 to 48.125 with dt = 0.125 Fast time integration at level 0 from 48.125 to 48.25 with dt = 0.125 Fast time integration at level 0 from 48.25 to 48.375 with dt = 0.125 Fast time integration at level 0 from 48.375 to 48.5 with dt = 0.125 Time integration of scalars at level 0 from 48 to 48.5 with dt = 0.5 using RHS created at 48.25 Done with advance_dycore at level 0 [Level 0 step 97] Advanced 80000 cells Cloud fraction 48 1 Coarse STEP 97 ends. TIME = 48.5 DT = 0.5 Timestep time = 0.424005673 seconds. TIME= 48.5 MASS = 5.886316959e+10 RHO THETA = 1.822703798e+13 RHO SCALAR = 0 RHO QTOTAL = 1176831635 Coarse STEP 98 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8773722718 (terrain aware) 0.8773722718 (terrain unaware) Anelastic dt at level 0 would be: 56.74169261 (terrain aware) 56.74169261 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 98] ADVANCE from elapsed time = 48.5 to 49 with dt = 0.5 Making slow rhs at time 48.5 for fast variables advancing from 48.5 to 48.66666666667 Fast time integration at level 0 from 48.5 to 48.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 48.5 to 48.66666666667 with dt = 0.1666666666667 using RHS created at 48.5 Making slow rhs at time 48.66666666667 for fast variables advancing from 48.5 to 48.75 Fast time integration at level 0 from 48.5 to 48.625 with dt = 0.125 Fast time integration at level 0 from 48.625 to 48.75 with dt = 0.125 Time integration of scalars at level 0 from 48.5 to 48.75 with dt = 0.25 using RHS created at 48.66666666667 Making slow rhs at time 48.75 for fast variables advancing from 48.5 to 49 Fast time integration at level 0 from 48.5 to 48.625 with dt = 0.125 Fast time integration at level 0 from 48.625 to 48.75 with dt = 0.125 Fast time integration at level 0 from 48.75 to 48.875 with dt = 0.125 Fast time integration at level 0 from 48.875 to 49 with dt = 0.125 Time integration of scalars at level 0 from 48.5 to 49 with dt = 0.5 using RHS created at 48.75 Done with advance_dycore at level 0 [Level 0 step 98] Advanced 80000 cells Cloud fraction 48.5 1 Coarse STEP 98 ends. TIME = 49 DT = 0.5 Timestep time = 0.424476788 seconds. TIME= 49 MASS = 5.886316959e+10 RHO THETA = 1.822720799e+13 RHO SCALAR = 0 RHO QTOTAL = 1176826689 Coarse STEP 99 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8773140266 (terrain aware) 0.8773140266 (terrain unaware) Anelastic dt at level 0 would be: 56.21336139 (terrain aware) 56.21336139 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 99] ADVANCE from elapsed time = 49 to 49.5 with dt = 0.5 Making slow rhs at time 49 for fast variables advancing from 49 to 49.16666666667 Fast time integration at level 0 from 49 to 49.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 49 to 49.16666666667 with dt = 0.1666666666667 using RHS created at 49 Making slow rhs at time 49.16666666667 for fast variables advancing from 49 to 49.25 Fast time integration at level 0 from 49 to 49.125 with dt = 0.125 Fast time integration at level 0 from 49.125 to 49.25 with dt = 0.125 Time integration of scalars at level 0 from 49 to 49.25 with dt = 0.25 using RHS created at 49.16666666667 Making slow rhs at time 49.25 for fast variables advancing from 49 to 49.5 Fast time integration at level 0 from 49 to 49.125 with dt = 0.125 Fast time integration at level 0 from 49.125 to 49.25 with dt = 0.125 Fast time integration at level 0 from 49.25 to 49.375 with dt = 0.125 Fast time integration at level 0 from 49.375 to 49.5 with dt = 0.125 Time integration of scalars at level 0 from 49 to 49.5 with dt = 0.5 using RHS created at 49.25 Done with advance_dycore at level 0 [Level 0 step 99] Advanced 80000 cells Cloud fraction 49 1 Coarse STEP 99 ends. TIME = 49.5 DT = 0.5 Timestep time = 0.424409347 seconds. TIME= 49.5 MASS = 5.886316959e+10 RHO THETA = 1.822737651e+13 RHO SCALAR = 0 RHO QTOTAL = 1176821714 Coarse STEP 100 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.877256332 (terrain aware) 0.877256332 (terrain unaware) Anelastic dt at level 0 would be: 55.68214926 (terrain aware) 55.68214926 (terrain unaware) Fixed dt at level 0 is: 0.5 smallest even ratio is: 4 [Level 0 step 100] ADVANCE from elapsed time = 49.5 to 50 with dt = 0.5 Making slow rhs at time 49.5 for fast variables advancing from 49.5 to 49.66666666667 Fast time integration at level 0 from 49.5 to 49.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 49.5 to 49.66666666667 with dt = 0.1666666666667 using RHS created at 49.5 Making slow rhs at time 49.66666666667 for fast variables advancing from 49.5 to 49.75 Fast time integration at level 0 from 49.5 to 49.625 with dt = 0.125 Fast time integration at level 0 from 49.625 to 49.75 with dt = 0.125 Time integration of scalars at level 0 from 49.5 to 49.75 with dt = 0.25 using RHS created at 49.66666666667 Making slow rhs at time 49.75 for fast variables advancing from 49.5 to 50 Fast time integration at level 0 from 49.5 to 49.625 with dt = 0.125 Fast time integration at level 0 from 49.625 to 49.75 with dt = 0.125 Fast time integration at level 0 from 49.75 to 49.875 with dt = 0.125 Fast time integration at level 0 from 49.875 to 50 with dt = 0.125 Time integration of scalars at level 0 from 49.5 to 50 with dt = 0.5 using RHS created at 49.75 Done with advance_dycore at level 0 [Level 0 step 100] Advanced 80000 cells Cloud fraction 49.5 1 Coarse STEP 100 ends. TIME = 50 DT = 0.5 Timestep time = 0.424502227 seconds. TIME= 50 MASS = 5.886316959e+10 RHO THETA = 1.822754407e+13 RHO SCALAR = 0 RHO QTOTAL = 1176816709 Writing native 3D plotfile Bubble_Morrison_plt00100 3DPlotfile write time = 0.047468786 seconds. Total Time: 46.59626254 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [6171 ... 6295] [The Arena] max space (MB) allocated spread across MPI: [199 ... 199] [The Arena] max space (MB) used spread across MPI: [123 ... 123] [The Device Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Device Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [4 ... 4] AMReX (26.08-27-g28ba7777ca50) finalized