Initializing AMReX (26.04-79-g040fac1e7e48)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.04-79-g040fac1e7e48) initialized
   MFIX git describe: 26.04-10-g241b3ff59e79
AMReX-Hydro git hash: c90e2c8b17be110faa4ec7cb2e370a3a65e68e3b
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building box geometry.
 
Now making the ebfactories ...
Done making the eb levels ...
 

On level 0 updated BC areas:
Reading particles from particle_input.dat ...
Time spent in initializing particles 0.004770647


****************************************
  Coverage report:  Grids        Cells
          regular:      0         1000
          covered:      0            0
              cut:      1            0
****************************************

Bounding box for levelset imposed walls (EB box geometry):
   Lo: -0.0015  1e-15  -0.0015
   Hi: 0.003  0.0015  0.003
Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  full-domain                      0                 0                 0
  sub-domain                       0                 0                 0
  ----------------  ----------------  ----------------  ----------------
  Total                            0                 0                 0
  ****************  ****************  ****************  ****************
Setting original sum_vol to 2.617352572e-09
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  0  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.6032764006 0.943668079
After  projection:
   max(abs(u/v/w))  = 0  0  0
Doing initial pressure iterations with dt = 2.7e-05

In initial_iterations: iter = 0
Before projection:
   max(abs(u/v/w))  = 0.3012723965  0.3218753942  0.2766439486
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.6032764006 0.943668079
After  projection:
   max(abs(u/v/w))  = 0.316185937  0.2478905012  0.1992440773

In initial_iterations: iter = 1
Before projection:
   max(abs(u/v/w))  = 0.2775165759  0.2912343327  0.2494995422
   max(abs(gpx/gpy/gpz))  = 4469.461358  3568.111952  4237.056236
Min and Max of epf 0.6032764006 0.943668079
After  projection:
   max(abs(u/v/w))  = 0.3155334644  0.2396825409  0.1898728966

In initial_iterations: iter = 2
Before projection:
   max(abs(u/v/w))  = 0.282206468  0.2699593324  0.2290427249
   max(abs(gpx/gpy/gpz))  = 7241.21438  5651.986853  6717.645049
Min and Max of epf 0.6032764006 0.943668079
After  projection:
   max(abs(u/v/w))  = 0.3150066416  0.233184393  0.184983729
Enclosed domain volume is   2.617352572e-09
Time spent in init      0.205152094

  Writing plotfile BENCH02-Size0001-Godunov_plt00000 at time 0

 ============   NEW TIME STEP   ============ 

   Step 1: from old_time 0 to new time 2.7e-05 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4403713348  0.4171656863  0.4544407697
   max(abs(gpx/gpy/gpz))  = 9036.934189  7134.180062  8925.407246
Min and Max of epf 0.6032764006 0.943668079
After  projection:
   max(abs(u/v/w))  = 0.3028193147  0.2816972396  0.2301224723
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.059974463
   Time per 49 particle steps 0.014843416
   Coupling time per step   0.002188686
   Time per step        0.077836794

 ============   NEW TIME STEP   ============ 

   Step 2: from old_time 2.7e-05 to new time 5.4e-05 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.9178806712  0.6425389578  0.9574113899
   max(abs(gpx/gpy/gpz))  = 8011.67229  6694.690751  8308.085089
Min and Max of epf 0.6017204751 0.942178896
After  projection:
   max(abs(u/v/w))  = 0.651718573  0.5428093429  0.4999644474
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.054236143
   Time per 49 particle steps 0.012699743
   Coupling time per step   0.001654549
   Time per step        0.069367716

 ============   NEW TIME STEP   ============ 

   Step 3: from old_time 5.4e-05 to new time 8.1e-05 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 1.065697292  0.6276597819  1.018563123
   max(abs(gpx/gpy/gpz))  = 15381.5246  8732.362605  19366.55024
Min and Max of epf 0.5868461678 0.9412751251
After  projection:
   max(abs(u/v/w))  = 0.8547186479  0.5216238352  0.7350123924
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.054228369
   Time per 49 particle steps 0.012485083
   Coupling time per step   0.001603881
   Time per step        0.069073122

 ============   NEW TIME STEP   ============ 

   Step 4: from old_time 8.1e-05 to new time 0.000108 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 1.120078078  0.666958871  0.9800022716
   max(abs(gpx/gpy/gpz))  = 20902.25686  11320.51587  21875.8135
Min and Max of epf 0.5596811864 0.9399377805
After  projection:
   max(abs(u/v/w))  = 0.9351432401  0.4402908533  0.7078976471
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.052538452
   Time per 49 particle steps 0.012625901
   Coupling time per step   0.001649157
   Time per step        0.067532228

 ============   NEW TIME STEP   ============ 

   Step 5: from old_time 0.000108 to new time 0.000135 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 1.040242604  0.7182586568  0.8750133378
   max(abs(gpx/gpy/gpz))  = 20825.1442  10822.2109  20516.91252
Min and Max of epf 0.547546659 0.9406618199
After  projection:
   max(abs(u/v/w))  = 0.6368897074  0.445775825  0.5944736333
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.05315291
   Time per 49 particle steps 0.012518318
   Coupling time per step   0.001633779
   Time per step        0.068004126

 ============   NEW TIME STEP   ============ 

   Step 6: from old_time 0.000135 to new time 0.000162 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.8050407586  0.6109536016  0.7711102607
   max(abs(gpx/gpy/gpz))  = 21149.7606  12756.05879  17460.81527
Min and Max of epf 0.5682226471 0.9598442233
After  projection:
   max(abs(u/v/w))  = 0.5400233636  0.4511377211  0.4564206577
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056080847
   Time per 49 particle steps 0.01243028
   Coupling time per step   0.001572876
   Time per step        0.070796615

 ============   NEW TIME STEP   ============ 

   Step 7: from old_time 0.000162 to new time 0.000189 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.7095830909  0.6255768024  0.8121493801
   max(abs(gpx/gpy/gpz))  = 17062.00865  12991.31915  16458.70603
Min and Max of epf 0.5735792872 0.9755285975
After  projection:
   max(abs(u/v/w))  = 0.4413754448  0.4019868898  0.4510858092
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.054607996
   Time per 49 particle steps 0.012352111
   Coupling time per step   0.001672519
   Time per step        0.06935876

 ============   NEW TIME STEP   ============ 

   Step 8: from old_time 0.000189 to new time 0.000216 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.7231481198  0.5130710385  0.7190722415
   max(abs(gpx/gpy/gpz))  = 16294.80319  11127.06416  17694.34576
Min and Max of epf 0.567055844 0.9793947358
After  projection:
   max(abs(u/v/w))  = 0.5127629079  0.3748697321  0.431424898
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056280744
   Time per 49 particle steps 0.012648313
   Coupling time per step   0.001637042
   Time per step        0.071323326

 ============   NEW TIME STEP   ============ 

   Step 9: from old_time 0.000216 to new time 0.000243 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.680855302  0.510261244  0.6656188503
   max(abs(gpx/gpy/gpz))  = 17082.93129  11223.04133  18459.90492
Min and Max of epf 0.5645943609 0.9932029584
After  projection:
   max(abs(u/v/w))  = 0.3977896006  0.3661709098  0.3848145173
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057493211
   Time per 49 particle steps 0.012447776
   Coupling time per step   0.001657932
   Time per step        0.072320281

 ============   NEW TIME STEP   ============ 

   Step 10: from old_time 0.000243 to new time 0.00027 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.6507104514  0.4725409684  0.7213257964
   max(abs(gpx/gpy/gpz))  = 14562.78384  11509.93967  16137.26216
Min and Max of epf 0.5872468452 0.9847539342
After  projection:
   max(abs(u/v/w))  = 0.4028016002  0.3818035338  0.3642222056
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.05645498
   Time per 49 particle steps 0.01227927
   Coupling time per step   0.001599643
   Time per step        0.0710515

 ============   NEW TIME STEP   ============ 

   Step 11: from old_time 0.00027 to new time 0.000297 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.7262241848  0.5098614821  0.6975338983
   max(abs(gpx/gpy/gpz))  = 13525.46307  10773.09973  16010.58277
Min and Max of epf 0.5504467768 0.9736584436
After  projection:
   max(abs(u/v/w))  = 0.4213542592  0.3834456741  0.3906304177
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056327965
   Time per 49 particle steps 0.012379933
   Coupling time per step   0.001676714
   Time per step        0.071202465

 ============   NEW TIME STEP   ============ 

   Step 12: from old_time 0.000297 to new time 0.000324 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.7181433912  0.4474285238  0.6683903317
   max(abs(gpx/gpy/gpz))  = 13071.0706  8929.69081  15409.03965
Min and Max of epf 0.5545011388 0.982683063
After  projection:
   max(abs(u/v/w))  = 0.4418486346  0.3469208181  0.4266254285
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056878552
   Time per 49 particle steps 0.012332608
   Coupling time per step   0.001523033
   Time per step        0.071487252

 ============   NEW TIME STEP   ============ 

   Step 13: from old_time 0.000324 to new time 0.000351 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5912742424  0.5374860148  0.5607134922
   max(abs(gpx/gpy/gpz))  = 14079.97614  8704.766628  15900.56568
Min and Max of epf 0.5987790117 0.9964891219
After  projection:
   max(abs(u/v/w))  = 0.4365911798  0.3659139116  0.4136654309
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056350069
   Time per 49 particle steps 0.012010189
   Coupling time per step   0.001601709
   Time per step        0.070681459

 ============   NEW TIME STEP   ============ 

   Step 14: from old_time 0.000351 to new time 0.000378 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5599138944  0.5700140958  0.6082252521
   max(abs(gpx/gpy/gpz))  = 12526.93046  11046.50136  15052.50929
Min and Max of epf 0.5840508836 0.9897119324
After  projection:
   max(abs(u/v/w))  = 0.390288168  0.3690492049  0.407538448
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056866495
   Time per 49 particle steps 0.011936187
   Coupling time per step   0.001652232
   Time per step        0.071180284

 ============   NEW TIME STEP   ============ 

   Step 15: from old_time 0.000378 to new time 0.000405 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.536172781  0.5035813092  0.5722639058
   max(abs(gpx/gpy/gpz))  = 13321.40348  10210.43502  13785.72605
Min and Max of epf 0.5851272214 0.9844846815
After  projection:
   max(abs(u/v/w))  = 0.4274424978  0.345192099  0.4214923068
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055628911
   Time per 49 particle steps 0.012350164
   Coupling time per step   0.001637452
   Time per step        0.070317679

 ============   NEW TIME STEP   ============ 

   Step 16: from old_time 0.000405 to new time 0.000432 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5615829582  0.3966719824  0.5435965171
   max(abs(gpx/gpy/gpz))  = 14198.8029  7421.914468  12294.79842
Min and Max of epf 0.5803251405 0.9810755094
After  projection:
   max(abs(u/v/w))  = 0.3777041998  0.330989278  0.4175329475
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056979825
   Time per 49 particle steps 0.012498499
   Coupling time per step   0.001648848
   Time per step        0.071912654

 ============   NEW TIME STEP   ============ 

   Step 17: from old_time 0.000432 to new time 0.000459 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5678041996  0.3871057672  0.6091052564
   max(abs(gpx/gpy/gpz))  = 12968.73034  7045.127823  11644.4545
Min and Max of epf 0.5780078631 0.9806648769
After  projection:
   max(abs(u/v/w))  = 0.361785469  0.36275499  0.3591587606
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056698067
   Time per 49 particle steps 0.012362132
   Coupling time per step   0.001664779
   Time per step        0.071443108

 ============   NEW TIME STEP   ============ 

   Step 18: from old_time 0.000459 to new time 0.000486 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5549102807  0.4109531808  0.6500379968
   max(abs(gpx/gpy/gpz))  = 12315.83405  7130.858557  11783.60984
Min and Max of epf 0.5864405417 0.9835431272
After  projection:
   max(abs(u/v/w))  = 0.3731850433  0.3476912137  0.3739395225
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057121938
   Time per 49 particle steps 0.011921569
   Coupling time per step   0.001679497
   Time per step        0.071479892

 ============   NEW TIME STEP   ============ 

   Step 19: from old_time 0.000486 to new time 0.000513 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5822255886  0.3851857679  0.6613163951
   max(abs(gpx/gpy/gpz))  = 13171.83043  7181.839477  11482.57747
Min and Max of epf 0.5903987587 0.9887023046
After  projection:
   max(abs(u/v/w))  = 0.411498325  0.2911137614  0.3903694105
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057962495
   Time per 49 particle steps 0.012356075
   Coupling time per step   0.001561878
   Time per step        0.072582637

 ============   NEW TIME STEP   ============ 

   Step 20: from old_time 0.000513 to new time 0.00054 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5505200951  0.386516759  0.6537624271
   max(abs(gpx/gpy/gpz))  = 13831.65384  7045.25901  11717.11884
Min and Max of epf 0.6104415884 0.9862283797
After  projection:
   max(abs(u/v/w))  = 0.4027043974  0.2973257863  0.4119648216
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.058164009
   Time per 49 particle steps 0.012581723
   Coupling time per step   0.001630253
   Time per step        0.073134886

 ============   NEW TIME STEP   ============ 

   Step 21: from old_time 0.00054 to new time 0.000567 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5526994038  0.3709109413  0.5834981996
   max(abs(gpx/gpy/gpz))  = 14025.31096  6725.621887  12126.0236
Min and Max of epf 0.5813942256 0.9911298666
After  projection:
   max(abs(u/v/w))  = 0.3866952147  0.306059426  0.417914151
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057436638
   Time per 49 particle steps 0.012307029
   Coupling time per step   0.001759377
   Time per step        0.072263949

 ============   NEW TIME STEP   ============ 

   Step 22: from old_time 0.000567 to new time 0.000594 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5514655347  0.3951154005  0.5059671817
   max(abs(gpx/gpy/gpz))  = 12890.59463  6308.420538  11030.36268
Min and Max of epf 0.5591858854 0.9938906162
After  projection:
   max(abs(u/v/w))  = 0.4263070146  0.3021238245  0.3887617896
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055262615
   Time per 49 particle steps 0.012214611
   Coupling time per step   0.001605213
   Time per step        0.069818322

 ============   NEW TIME STEP   ============ 

   Step 23: from old_time 0.000594 to new time 0.000621 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5601600434  0.4174554465  0.4438110114
   max(abs(gpx/gpy/gpz))  = 13414.46502  6799.270138  9066.452048
Min and Max of epf 0.5591813155 0.997965364
After  projection:
   max(abs(u/v/w))  = 0.4374754787  0.2846023663  0.4003994091
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055409271
   Time per 49 particle steps 0.012415499
   Coupling time per step   0.001608133
   Time per step        0.070152062

 ============   NEW TIME STEP   ============ 

   Step 24: from old_time 0.000621 to new time 0.000648 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.5061482853  0.4062817222  0.4400896315
   max(abs(gpx/gpy/gpz))  = 12702.95957  7954.801807  8781.572655
Min and Max of epf 0.5613178567 0.9985808874
After  projection:
   max(abs(u/v/w))  = 0.4245362334  0.2929807704  0.3358129846
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055661879
   Time per 49 particle steps 0.012082164
   Coupling time per step   0.001601843
   Time per step        0.07006236

 ============   NEW TIME STEP   ============ 

   Step 25: from old_time 0.000648 to new time 0.000675 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.442387674  0.3779927006  0.4219430135
   max(abs(gpx/gpy/gpz))  = 11457.77845  8107.562807  7771.086019
Min and Max of epf 0.5672880252 0.9989554804
After  projection:
   max(abs(u/v/w))  = 0.3902222453  0.3075068871  0.3243893388
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056329592
   Time per 49 particle steps 0.012242978
   Coupling time per step   0.001692083
   Time per step        0.070948761

 ============   NEW TIME STEP   ============ 

   Step 26: from old_time 0.000675 to new time 0.000702 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4351598249  0.3354243785  0.4026125566
   max(abs(gpx/gpy/gpz))  = 11410.8933  7683.834091  8318.289277
Min and Max of epf 0.5707730885 0.9993941734
After  projection:
   max(abs(u/v/w))  = 0.360681117  0.3428512022  0.3144567735
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055884023
   Time per 49 particle steps 0.012410997
   Coupling time per step   0.001696193
   Time per step        0.070775847

 ============   NEW TIME STEP   ============ 

   Step 27: from old_time 0.000702 to new time 0.000729 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4398882311  0.3338087805  0.3836078954
   max(abs(gpx/gpy/gpz))  = 11293.82346  7493.505556  9260.397744
Min and Max of epf 0.5634834584 0.9995544742
After  projection:
   max(abs(u/v/w))  = 0.3186180842  0.3562948554  0.3095391347
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057128562
   Time per 49 particle steps 0.012588275
   Coupling time per step   0.001728966
   Time per step        0.072198064

 ============   NEW TIME STEP   ============ 

   Step 28: from old_time 0.000729 to new time 0.000756 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4250671743  0.3290631714  0.3736617258
   max(abs(gpx/gpy/gpz))  = 9992.523113  7141.428689  9365.681904
Min and Max of epf 0.5599499594 0.9996899038
After  projection:
   max(abs(u/v/w))  = 0.319091407  0.3503771419  0.3251365809
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056424663
   Time per 49 particle steps 0.012145013
   Coupling time per step   0.001676176
   Time per step        0.071022309

 ============   NEW TIME STEP   ============ 

   Step 29: from old_time 0.000756 to new time 0.000783 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4274041252  0.3315018963  0.3481305279
   max(abs(gpx/gpy/gpz))  = 8272.78399  6521.357388  7758.82561
Min and Max of epf 0.5594035585 0.9995742861
After  projection:
   max(abs(u/v/w))  = 0.3188068385  0.3304559838  0.3363807344
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055884347
   Time per 49 particle steps 0.011935615
   Coupling time per step   0.001695575
   Time per step        0.070262621

 ============   NEW TIME STEP   ============ 

   Step 30: from old_time 0.000783 to new time 0.00081 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4269683489  0.327056361  0.3411458681
   max(abs(gpx/gpy/gpz))  = 9079.876213  6609.044194  7380.550401
Min and Max of epf 0.5664536206 0.9985883801
After  projection:
   max(abs(u/v/w))  = 0.2676792772  0.2836947934  0.3372055718
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055338716
   Time per 49 particle steps 0.012342286
   Coupling time per step   0.001684866
   Time per step        0.070210131

 ============   NEW TIME STEP   ============ 

   Step 31: from old_time 0.00081 to new time 0.000837 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.4028969568  0.3457145968  0.3099310816
   max(abs(gpx/gpy/gpz))  = 9457.188659  7757.475694  6764.118485
Min and Max of epf 0.5571283436 0.9982876702
After  projection:
   max(abs(u/v/w))  = 0.2719865974  0.2719562508  0.3312354006
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.054234123
   Time per 49 particle steps 0.012251747
   Coupling time per step   0.001634372
   Time per step        0.068889617

 ============   NEW TIME STEP   ============ 

   Step 32: from old_time 0.000837 to new time 0.000864 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3737984312  0.3496648107  0.2972492071
   max(abs(gpx/gpy/gpz))  = 9328.762469  7673.561665  6214.511491
Min and Max of epf 0.5548482309 0.9987362795
After  projection:
   max(abs(u/v/w))  = 0.262936813  0.2468384373  0.3170268965
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.054741465
   Time per 49 particle steps 0.012138874
   Coupling time per step   0.001621869
   Time per step        0.069189491

 ============   NEW TIME STEP   ============ 

   Step 33: from old_time 0.000864 to new time 0.000891 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2989357695  0.3375523872  0.2968067106
   max(abs(gpx/gpy/gpz))  = 8735.787221  8058.960024  5347.448574
Min and Max of epf 0.5582163218 1
After  projection:
   max(abs(u/v/w))  = 0.2528316382  0.2568793846  0.3220187707
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.054119735
   Time per 49 particle steps 0.012263488
   Coupling time per step   0.00167663
   Time per step        0.068828842

 ============   NEW TIME STEP   ============ 

   Step 34: from old_time 0.000891 to new time 0.000918 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.316369482  0.3574368136  0.2919332658
   max(abs(gpx/gpy/gpz))  = 7751.512301  7810.052973  4773.031325
Min and Max of epf 0.5611420361 0.9999667174
After  projection:
   max(abs(u/v/w))  = 0.2694991586  0.275949637  0.2974128713
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056747172
   Time per 49 particle steps 0.011934848
   Coupling time per step   0.001800376
   Time per step        0.071239258

 ============   NEW TIME STEP   ============ 

   Step 35: from old_time 0.000918 to new time 0.000945 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3097118262  0.3531891435  0.2835519991
   max(abs(gpx/gpy/gpz))  = 6906.888051  6484.917138  4734.267924
Min and Max of epf 0.5672557144 0.9996321803
After  projection:
   max(abs(u/v/w))  = 0.265219502  0.2748227224  0.2730845674
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057353333
   Time per 49 particle steps 0.011602807
   Coupling time per step   0.001598529
   Time per step        0.071295073

 ============   NEW TIME STEP   ============ 

   Step 36: from old_time 0.000945 to new time 0.000972 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3278944114  0.3092503299  0.3071312074
   max(abs(gpx/gpy/gpz))  = 6060.411603  5925.267984  5177.145112
Min and Max of epf 0.5652868373 0.9992611346
After  projection:
   max(abs(u/v/w))  = 0.2727320235  0.2289630592  0.2899003739
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056430425
   Time per 49 particle steps 0.012032523
   Coupling time per step   0.00160947
   Time per step        0.070810357

 ============   NEW TIME STEP   ============ 

   Step 37: from old_time 0.000972 to new time 0.000999 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3366108823  0.3237415842  0.3326495089
   max(abs(gpx/gpy/gpz))  = 6067.014502  4828.500519  5279.794113
Min and Max of epf 0.5628879561 0.9989948681
After  projection:
   max(abs(u/v/w))  = 0.2725036625  0.2302041192  0.2830369478
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.0556957
   Time per 49 particle steps 0.012085864
   Coupling time per step   0.001667286
   Time per step        0.070204223

 ============   NEW TIME STEP   ============ 

   Step 38: from old_time 0.000999 to new time 0.001026 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3285337068  0.317773803  0.3272907669
   max(abs(gpx/gpy/gpz))  = 6222.164003  5306.887274  4883.861409
Min and Max of epf 0.5649177989 0.9986920091
After  projection:
   max(abs(u/v/w))  = 0.2673289119  0.2214962004  0.3141962838
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055982454
   Time per 49 particle steps 0.012020261
   Coupling time per step   0.001596163
   Time per step        0.070312509

 ============   NEW TIME STEP   ============ 

   Step 39: from old_time 0.001026 to new time 0.001053 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3321515121  0.2653079075  0.3351748692
   max(abs(gpx/gpy/gpz))  = 6349.889687  4742.933796  5143.686668
Min and Max of epf 0.5745632053 0.9983404213
After  projection:
   max(abs(u/v/w))  = 0.2667662649  0.2039669144  0.3102321316
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055031394
   Time per 49 particle steps 0.011778512
   Coupling time per step   0.001716557
   Time per step        0.069226838

 ============   NEW TIME STEP   ============ 

   Step 40: from old_time 0.001053 to new time 0.00108 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3505588659  0.2664865085  0.3275536815
   max(abs(gpx/gpy/gpz))  = 6673.961072  4597.745764  5318.739496
Min and Max of epf 0.5800582308 0.997944444
After  projection:
   max(abs(u/v/w))  = 0.2715022325  0.2232174958  0.2921623642
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.0558754
   Time per 49 particle steps 0.011413807
   Coupling time per step   0.001625636
   Time per step        0.069598827

 ============   NEW TIME STEP   ============ 

   Step 41: from old_time 0.00108 to new time 0.001107 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3250603333  0.3162707269  0.3163061775
   max(abs(gpx/gpy/gpz))  = 7449.141635  3979.157827  6208.578505
Min and Max of epf 0.5789441862 0.9979066908
After  projection:
   max(abs(u/v/w))  = 0.2686837946  0.2622079039  0.2741658345
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056108437
   Time per 49 particle steps 0.011811638
   Coupling time per step   0.001608597
   Time per step        0.070238114

 ============   NEW TIME STEP   ============ 

   Step 42: from old_time 0.001107 to new time 0.001134 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3051243218  0.3263405966  0.3129301107
   max(abs(gpx/gpy/gpz))  = 7252.935121  4106.857238  6369.409077
Min and Max of epf 0.5782266427 0.9999733827
After  projection:
   max(abs(u/v/w))  = 0.2744668155  0.2659021654  0.2547213535
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.057034124
   Time per 49 particle steps 0.011783228
   Coupling time per step   0.001699488
   Time per step        0.071219397

 ============   NEW TIME STEP   ============ 

   Step 43: from old_time 0.001134 to new time 0.001161 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3010776946  0.3477289249  0.3070302442
   max(abs(gpx/gpy/gpz))  = 7545.858341  4472.842734  5970.450899
Min and Max of epf 0.5833569927 0.998551547
After  projection:
   max(abs(u/v/w))  = 0.2697873735  0.2703530685  0.2332255688
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056935847
   Time per 49 particle steps 0.01179534
   Coupling time per step   0.001716305
   Time per step        0.071194317

 ============   NEW TIME STEP   ============ 

   Step 44: from old_time 0.001161 to new time 0.001188 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2884846085  0.3560029035  0.2914393059
   max(abs(gpx/gpy/gpz))  = 7046.028012  4842.367911  5439.608146
Min and Max of epf 0.5939673175 0.9958652005
After  projection:
   max(abs(u/v/w))  = 0.2571932042  0.2750495347  0.2156020243
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056729644
   Time per 49 particle steps 0.011765765
   Coupling time per step   0.001680509
   Time per step        0.070960271

 ============   NEW TIME STEP   ============ 

   Step 45: from old_time 0.001188 to new time 0.001215 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2865989346  0.3174682323  0.2708120317
   max(abs(gpx/gpy/gpz))  = 6360.113631  4727.022175  5329.576448
Min and Max of epf 0.6026328454 0.9935210291
After  projection:
   max(abs(u/v/w))  = 0.2382633671  0.2469411917  0.2097432967
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.05574504
   Time per 49 particle steps 0.011789273
   Coupling time per step   0.001540787
   Time per step        0.069909502

 ============   NEW TIME STEP   ============ 

   Step 46: from old_time 0.001215 to new time 0.001242 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.3078927898  0.3083379468  0.271376392
   max(abs(gpx/gpy/gpz))  = 5807.027489  4414.644779  5156.83693
Min and Max of epf 0.6027327937 0.9910353478
After  projection:
   max(abs(u/v/w))  = 0.2213725197  0.2384466435  0.2149739262
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056248198
   Time per 49 particle steps 0.011587552
   Coupling time per step   0.001581407
   Time per step        0.070151682

 ============   NEW TIME STEP   ============ 

   Step 47: from old_time 0.001242 to new time 0.001269 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2999097122  0.297281196  0.3017667433
   max(abs(gpx/gpy/gpz))  = 5464.58979  4322.716461  4940.092405
Min and Max of epf 0.5993519829 0.9878898334
After  projection:
   max(abs(u/v/w))  = 0.2214754396  0.2339249515  0.2257265772
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056040903
   Time per 49 particle steps 0.011560165
   Coupling time per step   0.001682357
   Time per step        0.069998328

 ============   NEW TIME STEP   ============ 

   Step 48: from old_time 0.001269 to new time 0.001296 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2787965666  0.2787193487  0.3264079163
   max(abs(gpx/gpy/gpz))  = 5104.993859  3995.439937  5143.751134
Min and Max of epf 0.5968852773 0.9789699091
After  projection:
   max(abs(u/v/w))  = 0.2125606108  0.2261697069  0.2363912463
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055759688
   Time per 49 particle steps 0.011232542
   Coupling time per step   0.001554098
   Time per step        0.069263098

 ============   NEW TIME STEP   ============ 

   Step 49: from old_time 0.001296 to new time 0.001323 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2729058374  0.2562085449  0.3282387446
   max(abs(gpx/gpy/gpz))  = 5049.217173  3918.520496  5116.457823
Min and Max of epf 0.5949304172 0.9777413849
After  projection:
   max(abs(u/v/w))  = 0.2122850464  0.2148576541  0.2401708414
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.055768003
   Time per 49 particle steps 0.01177142
   Coupling time per step   0.001659535
   Time per step        0.069966513

 ============   NEW TIME STEP   ============ 

   Step 50: from old_time 0.001323 to new time 0.00135 with dt = 2.7e-05

Before projection:
   max(abs(u/v/w))  = 0.2644167177  0.2280795907  0.3160894897
   max(abs(gpx/gpy/gpz))  = 4873.937139  3775.967013  4580.756996
Min and Max of epf 0.5975741214 0.9809947795
After  projection:
   max(abs(u/v/w))  = 0.217933204  0.1992615949  0.2344797215
Evolving particles on level: 0 ... with fluid dt 2.7e-05
done. 
   Time per fluid step      0.056969624
   Time per 49 particle steps 0.011822502
   Coupling time per step   0.001627261
   Time per step        0.071140917
  Writing plotfile BENCH02-Size0001-Godunov_plt00050 at time 0.00135
Time spent in main (after init) 3.543431604
Time spent in main      3.748583698

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6705 ... 6705]
[The         Arena] max space (MB) allocated spread across MPI: [25 ... 25]
[The         Arena] max space (MB) used      spread across MPI: [21 ... 21]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [0 ... 0]
AMReX (26.04-79-g040fac1e7e48) finalized
