Initializing AMReX (26.07-21-g71b30881f620)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.07-21-g71b30881f620) initialized
   MFIX git describe: 26.07-5-g8f9f7d1af1ef
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.056147178 Iter = 0.049398047 Bottom = 0.026817796
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08997966815
MLMG: Iteration   2 Fine resid/bnorm = 0.003657232729
MLMG: Iteration   3 Fine resid/bnorm = 0.0001638546479
MLMG: Iteration   4 Fine resid/bnorm = 8.139014301e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.764595918e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.787086625e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.073390163e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.506496981e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.719210599e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.566414678e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.154465225e-12, 1.719210599e-12
MLMG: Timers: Solve = 0.071551335 Iter = 0.069628626 Bottom = 0.049575829
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192394125e-10
  * On level 1 max(abs(diveu)) = 1.498719524e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.82573196e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  2.999654111e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.11387995e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653319e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448913e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989389441e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.87332531e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880642143e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325382e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.969544192e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473586633e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.41053103e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049346001e-11
MLMG: Iteration  11 Fine resid/bnorm = 6.855048884e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488061646e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623035453e-12, 1.488061646e-12
MLMG: Timers: Solve = 0.052548674 Iter = 0.048795036 Bottom = 0.027025159
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.814744818e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.989236724e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02358716063
MLMG: Iteration   2 Fine resid/bnorm = 0.001371453808
MLMG: Iteration   3 Fine resid/bnorm = 6.185762434e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.072769189e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.565822439e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.948470397e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.979061407e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.935917434e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.100287062e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.611028309e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.460453758e-12, 9.100287062e-13
MLMG: Timers: Solve = 0.067825282 Iter = 0.066874705 Bottom = 0.049102146
 >> After projection
  * On level 0 max(abs(diveu)) = 3.044952072e-11
  * On level 1 max(abs(diveu)) = 4.100052653e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.872890356e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542642659e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.079725543e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960161983e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878588e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432468e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840628e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176349926e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.01292186e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498376e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070861505e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358110981e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.149697088e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835781898e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271638827e-12, 1.835781898e-12
MLMG: Timers: Solve = 0.046551551 Iter = 0.043302601 Bottom = 0.026136917
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.86644158e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.07160008e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02183878953
MLMG: Iteration   2 Fine resid/bnorm = 0.001163794225
MLMG: Iteration   3 Fine resid/bnorm = 5.18883042e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.593375476e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.336676631e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.88827895e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.530184175e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.764635989e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.542659242e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.352531647e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.601418787e-12, 8.542659242e-13
MLMG: Timers: Solve = 0.067690364 Iter = 0.066822956 Bottom = 0.049433846
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761381704e-11
  * On level 1 max(abs(diveu)) = 4.632325136e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.528027201e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.784018758e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.748993108e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012721163e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.1073426e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377135261e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.343940122e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142296e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304421742e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386312987e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.02787689e-12, 4.386312987e-12
MLMG: Timers: Solve = 0.040630297 Iter = 0.037360322 Bottom = 0.022298593
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.52551849e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.749234529e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.619314709

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02169288718
MLMG: Iteration   2 Fine resid/bnorm = 0.001148615335
MLMG: Iteration   3 Fine resid/bnorm = 5.098407845e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.545517131e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.311790343e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.794796879e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.490422014e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.738346685e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.367256024e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.387627176e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.536460903e-12, 8.367256024e-13
MLMG: Timers: Solve = 0.066269264 Iter = 0.065352694 Bottom = 0.048042897
 >> After projection
  * On level 0 max(abs(diveu)) = 3.035993849e-11
  * On level 1 max(abs(diveu)) = 3.236519778e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.313550365e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352259547e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.432494115e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323601079e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310907e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553348e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377665805e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953980713e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881985861e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238973e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.910144349e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858568328e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.972091726e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622691402e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117439723e-11, 9.622691402e-12
MLMG: Timers: Solve = 0.043806825 Iter = 0.040520054 Bottom = 0.023467603
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.307645023e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.425736756e-11
   Time per fluid step      0.1642849
   Time per step        0.165166196
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.192518756
Time spent in main      0.811833465

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.07-21-g71b30881f620) finalized