Initializing AMReX (26.07-41-g87f51bf4d85a)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.07-41-g87f51bf4d85a) initialized
   MFIX git describe: 26.07-5-g8f9f7d1af1ef
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 8
  eb_pad        = 8

================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================


================================================================================
Warning: Overwriting amr.plot_int with value from mfix.plot_int
================================================================================


================================================================================
Warning: Overwriting amr.plot_file with value from mfix.plot_file
================================================================================


================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Scalar diffusion coefficients
Tracer0: 0
Particle-particle conduction is disabled.
Particle-fluid-particle conduction is disabled.
Specified constant pressure drop: (1000,0,0)

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime


================================================================================
Warning: Regridding disabled for single level, single rank run.
================================================================================

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building cylinder geometry.
 
 Internal Flow: 1
 Radius:    0.49
 Height:    -1
 Direction: 0
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 1.5, 1.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
Auto generating particles ...
Total number of generated particles: 2,578
Time spent in initializing particles 0.020432281


****************************************
  Coverage report:  Grids        Cells
          regular:      0           45
          covered:      0         1000
              cut:      1           80
****************************************

Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  fluid-only                       0                 0                 0
  bed                          2,578             2,409               169
  ----------------  ----------------  ----------------  ----------------
  Total                        2,578             2,409               169
  ****************  ****************  ****************  ****************
On level 0: set volume fraction bcs
Setting original sum_vol to 0.644240679
On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 0 fillpatch tracer
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  1.301306859  1.301322376
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 0.4563612149  0.6312469473  0.6273563008
Doing initial pressure iterations with dt = 0.006801943661
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

In initial_iterations: iter = 0
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.010643795 Iter = 0.009992681 Bottom = 0.008650961
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619522271e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.192066375  0.6250270041  0.6250087748
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.510127789  0.6892201527  0.7654488095
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.010010422 Iter = 0.009785077 Bottom = 0.008496619
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619522271e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.442315174  0.688672966  0.7651472729
   max(abs(gpx/gpy/gpz))  = 248.7107182  36.5011993  24.20393237
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.367436185  0.6869503059  0.8243631051
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.010019023 Iter = 0.009767846 Bottom = 0.008476364
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619522271e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.37290977  0.6869649899  0.8242359637
   max(abs(gpx/gpy/gpz))  = 299.904474  52.00009876  35.45017746
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.289716346  0.6828018447  0.8579236626
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
Enclosed domain volume is   0.644240679
Time spent in init      0.14259733

  Writing plotfile TracerAdv_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 1: from old_time 0 to new time 0.005958505176 with dt = 0.005958505176

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.613043032e-12, 8.864743363e-13
MLMG: Timers: Solve = 0.009368529 Iter = 0.009148495 Bottom = 0.007923409
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619522271e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.357520189  0.6254107077  0.6249147549
   max(abs(gpx/gpy/gpz))  = 316.1156576  57.72579225  40.30120516
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.730824516  0.6429636337  0.7094041739
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.998191784
MLMG: Initial rhs               = 3.373008971
MLMG: Initial residual (resid0) = 3.373008971
MLMG: Final Iter. 12 resid, resid/bnorm = 1.371569525e-12, 4.066308558e-13
MLMG: Timers: Solve = 0.009394498 Iter = 0.009151392 Bottom = 0.007923256
 >> After projection
  * On level 0 max(abs(diveu)) = 2.224497797e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.266788959  0.6163335878  0.6122162754
   max(abs(gpx/gpy/gpz))  = 290.7545659  46.29350078  31.71955693
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.488034068  0.6360929939  0.7107801769
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005958505176
done. 
   Time per fluid step      0.052036625
   Time per 1 particle steps 0.000321052
   Coupling time per step   0.003427613
Sum tracer volume wgt = 157.3297645 141.6039915
   Time per step        0.057200345

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 2: from old_time 0.005958505176 to new time 0.01131104445 with dt = 0.005352539274

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.029032478
MLMG: Initial rhs               = 3.473762359
MLMG: Initial residual (resid0) = 3.473762359
MLMG: Final Iter. 12 resid, resid/bnorm = 1.051603249e-12, 3.027274581e-13
MLMG: Timers: Solve = 0.009386377 Iter = 0.00916894 Bottom = 0.007933944
 >> After projection
  * On level 0 max(abs(diveu)) = 1.706247184e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.91713179  0.6346706776  0.7065009317
   max(abs(gpx/gpy/gpz))  = 323.9163128  48.1921591  33.45491793
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.81775509  0.6670009659  0.8939572322
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.32826466
MLMG: Initial rhs               = 6.328053327
MLMG: Initial residual (resid0) = 6.328053327
MLMG: Final Iter. 12 resid, resid/bnorm = 8.264500195e-13, 1.306009885e-13
MLMG: Timers: Solve = 0.009449409 Iter = 0.00920326 Bottom = 0.007961452
 >> After projection
  * On level 0 max(abs(diveu)) = 1.337022672e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.62566263  0.6280330029  0.6847133411
   max(abs(gpx/gpy/gpz))  = 451.8541348  75.30659891  51.50958496
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.52500905  0.6587679101  0.8820414336
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005352539274
done. 
   Time per fluid step      0.051000688
   Time per 1 particle steps 0.000147831
   Coupling time per step   0.003052972
Sum tracer volume wgt = 157.6849191 141.6039915
   Time per step        0.055501924

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 3: from old_time 0.01131104445 to new time 0.01591549067 with dt = 0.00460444622

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.69399784
MLMG: Initial rhs               = 6.090757045
MLMG: Initial residual (resid0) = 6.090757045
MLMG: Final Iter. 12 resid, resid/bnorm = 8.844036614e-13, 1.452042258e-13
MLMG: Timers: Solve = 0.009354074 Iter = 0.009114735 Bottom = 0.007894167
 >> After projection
  * On level 0 max(abs(diveu)) = 1.433323164e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 15.17105903  0.6609094656  0.8630917589
   max(abs(gpx/gpy/gpz))  = 510.3573334  83.31668438  58.04434877
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 16.0462932  0.791547907  1.108498574
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.41897022
MLMG: Initial rhs               = 11.22724736
MLMG: Initial residual (resid0) = 11.22724736
MLMG: Final Iter. 11 resid, resid/bnorm = 1.056774728e-11, 9.412589694e-13
MLMG: Timers: Solve = 0.008598994 Iter = 0.008366137 Bottom = 0.00724367
 >> After projection
  * On level 0 max(abs(diveu)) = 1.654857871e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.83725332  0.6558483572  0.8339524198
   max(abs(gpx/gpy/gpz))  = 618.0924188  105.1325913  74.87995534
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.7134359  0.776198697  1.089360146
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.00460444622
done. 
   Time per fluid step      0.050074228
   Time per 1 particle steps 0.000174539
   Coupling time per step   0.003030507
Sum tracer volume wgt = 158.2185589 141.6039915
   Time per step        0.05457818

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 4: from old_time 0.01591549067 to new time 0.02000734275 with dt = 0.004091852082

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.40603592
MLMG: Initial rhs               = 11.03381439
MLMG: Initial residual (resid0) = 11.03381439
MLMG: Final Iter. 12 resid, resid/bnorm = 1.417976847e-12, 1.285119358e-13
MLMG: Timers: Solve = 0.00937947 Iter = 0.009162737 Bottom = 0.007937953
 >> After projection
  * On level 0 max(abs(diveu)) = 2.303223086e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.6802021  0.676000813  1.046588036
   max(abs(gpx/gpy/gpz))  = 668.4205788  110.337768  80.36009575
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 19.32922665  0.9671607924  1.332294931
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 29.26275852
MLMG: Initial rhs               = 14.47189276
MLMG: Initial residual (resid0) = 14.47189276
MLMG: Final Iter. 11 resid, resid/bnorm = 8.805400853e-12, 6.084484593e-13
MLMG: Timers: Solve = 0.008323958 Iter = 0.00805905 Bottom = 0.00692407
 >> After projection
  * On level 0 max(abs(diveu)) = 1.429023776e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.31777034  0.6699619399  1.014085614
   max(abs(gpx/gpy/gpz))  = 751.2393332  124.2068029  93.94754433
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.97672948  0.9493507314  1.307983615
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004091852082
done. 
   Time per fluid step      0.049784138
   Time per 1 particle steps 0.000151955
   Coupling time per step   0.002987777
Sum tracer volume wgt = 158.8980365 141.6039915
   Time per step        0.054277589

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 5: from old_time 0.02000734275 to new time 0.02375525182 with dt = 0.003747909066

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 28.96050027
MLMG: Initial rhs               = 14.2052441
MLMG: Initial residual (resid0) = 14.2052441
MLMG: Final Iter. 12 resid, resid/bnorm = 1.795563698e-12, 1.264014673e-13
MLMG: Timers: Solve = 0.008717459 Iter = 0.008509385 Bottom = 0.007341101
 >> After projection
  * On level 0 max(abs(diveu)) = 2.903249231e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 21.63416071  0.8230762842  1.240027015
   max(abs(gpx/gpy/gpz))  = 792.430183  126.6800285  97.46489513
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.90410105  1.187101522  1.552531211
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 36.65339596
MLMG: Initial rhs               = 16.46181875
MLMG: Initial residual (resid0) = 16.46181875
MLMG: Final Iter. 11 resid, resid/bnorm = 1.126249094e-11, 6.841583613e-13
MLMG: Timers: Solve = 0.008020394 Iter = 0.007786004 Bottom = 0.006718153
 >> After projection
  * On level 0 max(abs(diveu)) = 1.828605456e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 21.24928632  0.7920367345  1.206514299
   max(abs(gpx/gpy/gpz))  = 867.7046381  134.2555702  113.2184462
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.55239963  1.169407168  1.526468742
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003747909066
done. 
   Time per fluid step      0.047875567
   Time per 1 particle steps 0.000166064
   Coupling time per step   0.003122354
Sum tracer volume wgt = 159.6600207 141.6039915
   Time per step        0.052471357

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 6: from old_time 0.02375525182 to new time 0.02726024541 with dt = 0.003504993591

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 36.22896931
MLMG: Initial rhs               = 16.2909124
MLMG: Initial residual (resid0) = 16.2909124
MLMG: Final Iter. 11 resid, resid/bnorm = 1.061306598e-11, 6.514715516e-13
MLMG: Timers: Solve = 0.008010163 Iter = 0.007795907 Bottom = 0.006729623
 >> After projection
  * On level 0 max(abs(diveu)) = 1.722834689e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 24.15528261  1.032088115  1.433178218
   max(abs(gpx/gpy/gpz))  = 905.2369408  135.982866  117.7075219
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 24.22114903  1.414743138  1.763151593
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.69743375
MLMG: Initial rhs               = 17.85020794
MLMG: Initial residual (resid0) = 17.85020794
MLMG: Final Iter. 11 resid, resid/bnorm = 1.454863183e-11, 8.150399074e-13
MLMG: Timers: Solve = 0.008074325 Iter = 0.007834805 Bottom = 0.006751039
 >> After projection
  * On level 0 max(abs(diveu)) = 2.23469432e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.7554724  1.000728464  1.398168542
   max(abs(gpx/gpy/gpz))  = 966.8631246  144.3869675  131.2422238
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.80485144  1.393209985  1.734762925
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003504993591
done. 
   Time per fluid step      0.047323091
   Time per 1 particle steps 0.000150479
   Coupling time per step   0.002991089
Sum tracer volume wgt = 160.43426 141.6039915
   Time per step        0.051711942

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 7: from old_time 0.02726024541 to new time 0.03057023225 with dt = 0.003309986843

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.18284514
MLMG: Initial rhs               = 17.80935834
MLMG: Initial residual (resid0) = 17.80935834
MLMG: Final Iter. 11 resid, resid/bnorm = 1.550579966e-11, 8.706545945e-13
MLMG: Timers: Solve = 0.00800266 Iter = 0.007793705 Bottom = 0.006720601
 >> After projection
  * On level 0 max(abs(diveu)) = 2.3541476e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 26.32194459  1.225846298  1.615806787
   max(abs(gpx/gpy/gpz))  = 998.6372739  145.4127271  134.7961977
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 26.31658169  1.621353664  1.95777139
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 50.34428333
MLMG: Initial rhs               = 18.97893874
MLMG: Initial residual (resid0) = 18.97893874
MLMG: Final Iter. 11 resid, resid/bnorm = 1.845749937e-11, 9.725253671e-13
MLMG: Timers: Solve = 0.007993429 Iter = 0.007785159 Bottom = 0.006718987
 >> After projection
  * On level 0 max(abs(diveu)) = 2.921114933e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.91633017  1.19486297  1.581079526
   max(abs(gpx/gpy/gpz))  = 1049.150029  152.2486908  146.283826
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.89621049  1.597413201  1.928837583
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003309986843
done. 
   Time per fluid step      0.04714436
   Time per 1 particle steps 0.000204427
   Coupling time per step   0.003197453
Sum tracer volume wgt = 161.144782 141.6039915
   Time per step        0.051903765

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 8: from old_time 0.03057023225 to new time 0.03371153714 with dt = 0.003141304889

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.76723511
MLMG: Initial rhs               = 18.90259429
MLMG: Initial residual (resid0) = 18.90259429
MLMG: Final Iter. 11 resid, resid/bnorm = 1.77034155e-11, 9.365600949e-13
MLMG: Timers: Solve = 0.008006339 Iter = 0.007797146 Bottom = 0.006729264
 >> After projection
  * On level 0 max(abs(diveu)) = 2.826121687e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.18555242  1.405229663  1.800289995
   max(abs(gpx/gpy/gpz))  = 1076.390126  152.40224  149.0936192
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.11725888  1.806938917  2.136718728
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 56.57722221
MLMG: Initial rhs               = 19.35402917
MLMG: Initial residual (resid0) = 19.35402917
MLMG: Final Iter. 12 resid, resid/bnorm = 3.931799331e-12, 2.031514624e-13
MLMG: Timers: Solve = 0.009124476 Iter = 0.00888617 Bottom = 0.007625498
 >> After projection
  * On level 0 max(abs(diveu)) = 6.331430556e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.77681867  1.376264546  1.768608225
   max(abs(gpx/gpy/gpz))  = 1118.393415  157.4066103  158.6782519
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.69994035  1.780845149  2.10806014
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003141304889
done. 
   Time per fluid step      0.048654071
   Time per 1 particle steps 0.000142558
   Coupling time per step   0.002987794
Sum tracer volume wgt = 161.742525 141.6039915
   Time per step        0.053020191

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 9: from old_time 0.03371153714 to new time 0.03671616461 with dt = 0.003004627469

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.96893991
MLMG: Initial rhs               = 19.32130296
MLMG: Initial residual (resid0) = 19.32130296
MLMG: Final Iter. 12 resid, resid/bnorm = 4.751699034e-12, 2.459305692e-13
MLMG: Timers: Solve = 0.008699895 Iter = 0.008491454 Bottom = 0.007330256
 >> After projection
  * On level 0 max(abs(diveu)) = 7.685447433e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.79772278  1.569995123  2.062931121
   max(abs(gpx/gpy/gpz))  = 1141.929992  159.1742489  160.8453454
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.68399342  1.969822802  2.387051344
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 62.39945643
MLMG: Initial rhs               = 19.31295658
MLMG: Initial residual (resid0) = 19.31295658
MLMG: Final Iter. 12 resid, resid/bnorm = 5.717135099e-12, 2.960258869e-13
MLMG: Timers: Solve = 0.008763287 Iter = 0.008525539 Bottom = 0.007353907
 >> After projection
  * On level 0 max(abs(diveu)) = 9.25588623e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.3872406  1.542383931  2.028464574
   max(abs(gpx/gpy/gpz))  = 1176.707723  167.3588006  168.5950239
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.26874701  1.942338204  2.355419332
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003004627469
done. 
   Time per fluid step      0.049132741
   Time per 1 particle steps 0.00017412
   Coupling time per step   0.003015553
Sum tracer volume wgt = 162.1827272 141.6039915
   Time per step        0.053617551

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 10: from old_time 0.03671616461 to new time 0.03961022468 with dt = 0.002894060069

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 61.7479781
MLMG: Initial rhs               = 19.3832557
MLMG: Initial residual (resid0) = 19.3832557
MLMG: Final Iter. 12 resid, resid/bnorm = 5.588918217e-12, 2.883374342e-13
MLMG: Timers: Solve = 0.00870841 Iter = 0.008499901 Bottom = 0.007339285
 >> After projection
  * On level 0 max(abs(diveu)) = 9.043676548e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 31.20374155  1.716649797  2.301414714
   max(abs(gpx/gpy/gpz))  = 1197.593536  169.5188466  170.1872966
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 31.05563834  2.109527318  2.619303521
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 67.72237692
MLMG: Initial rhs               = 19.00450795
MLMG: Initial residual (resid0) = 19.00450795
MLMG: Final Iter. 12 resid, resid/bnorm = 5.970973715e-12, 3.141872303e-13
MLMG: Timers: Solve = 0.008735985 Iter = 0.008497879 Bottom = 0.00732865
 >> After projection
  * On level 0 max(abs(diveu)) = 9.633535219e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 30.7932485  1.690517372  2.265083664
   max(abs(gpx/gpy/gpz))  = 1226.801744  176.972237  176.4201664
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 30.64087842  2.082256993  2.588816836
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.002894060069
done. 
   Time per fluid step      0.048030297
   Time per 1 particle steps 0.000154626
   Coupling time per step   0.002881441
Sum tracer volume wgt = 162.4511773 141.6039915
   Time per step        0.052407824
  Writing plotfile TracerAdv_plt00010 at time 0.03961022468
Time spent in main (after init) 0.544177695
Time spent in main      0.686775025

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6621 ... 6621]
[The         Arena] max space (MB) allocated spread across MPI: [97 ... 97]
[The         Arena] max space (MB) used      spread across MPI: [78 ... 78]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [0 ... 0]
AMReX (26.07-41-g87f51bf4d85a) finalized