Initializing AMReX (26.07-41-g5ca2c5e23267)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.07-41-g5ca2c5e23267) initialized
   MFIX git describe: 26.07-5-g8f9f7d1af1ef
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055301307 Iter = 0.048629219 Bottom = 0.0262477
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08912282736
MLMG: Iteration   2 Fine resid/bnorm = 0.003581049377
MLMG: Iteration   3 Fine resid/bnorm = 0.0001646650746
MLMG: Iteration   4 Fine resid/bnorm = 8.163351583e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.753908865e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.775040998e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.01847216e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.474356602e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.737356169e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.587581304e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.219423109e-12, 1.737356169e-12
MLMG: Timers: Solve = 0.066285743 Iter = 0.064390498 Bottom = 0.045802114
 >> After projection
  * On level 0 max(abs(diveu)) = 1.19238963e-10
  * On level 1 max(abs(diveu)) = 1.582004178e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.843447196e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.019712573e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879951e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653269e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448683e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989386074e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873320945e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880299157e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392326816e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.961904951e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473582891e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.402735887e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049346625e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.392251113e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488117771e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623285254e-12, 1.488117771e-12
MLMG: Timers: Solve = 0.047764855 Iter = 0.044502717 Bottom = 0.02528335
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.832377341e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.00920657e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02358441814
MLMG: Iteration   2 Fine resid/bnorm = 0.001361431385
MLMG: Iteration   3 Fine resid/bnorm = 6.163436611e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.071771711e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.56363124e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.949029123e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.969995011e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.930658648e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.093459398e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.633035483e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.458607755e-12, 9.093459398e-13
MLMG: Timers: Solve = 0.065005235 Iter = 0.064103819 Bottom = 0.046795603
 >> After projection
  * On level 0 max(abs(diveu)) = 3.045256328e-11
  * On level 1 max(abs(diveu)) = 3.826510659e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.619305404e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542605011e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.814402862e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960312573e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878585e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432328e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406839727e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176356938e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012571257e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498412e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071863228e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111403e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.142685029e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784246e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640454e-12, 1.835784246e-12
MLMG: Timers: Solve = 0.046370342 Iter = 0.043107258 Bottom = 0.026016627
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.614476236e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.81020022e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02232131116
MLMG: Iteration   2 Fine resid/bnorm = 0.00116269706
MLMG: Iteration   3 Fine resid/bnorm = 5.173783042e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.5792656e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.321974574e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.858394393e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.51391907e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.755549156e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.489067751e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.30035111e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.585099055e-12, 8.489067751e-13
MLMG: Timers: Solve = 0.065727088 Iter = 0.06482884 Bottom = 0.047565887
 >> After projection
  * On level 0 max(abs(diveu)) = 2.76169201e-11
  * On level 1 max(abs(diveu)) = 5.186766068e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.794561524e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617523893e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  3.015530481e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012707693e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.1073426e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890301e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377136762e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.343955131e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.82314226e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304271653e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386315684e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027878137e-12, 4.386315684e-12
MLMG: Timers: Solve = 0.040713118 Iter = 0.037458446 Bottom = 0.022465312
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.790255127e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  3.010694002e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.594584666

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02198211165
MLMG: Iteration   2 Fine resid/bnorm = 0.001148862821
MLMG: Iteration   3 Fine resid/bnorm = 5.099649882e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.548195924e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.318145692e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.8180431e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.493888572e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.741534447e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.384553954e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.449430082e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.54170462e-12, 8.384553954e-13
MLMG: Timers: Solve = 0.065388801 Iter = 0.064497593 Bottom = 0.047211633
 >> After projection
  * On level 0 max(abs(diveu)) = 2.692087293e-11
  * On level 1 max(abs(diveu)) = 4.350419321e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.329406264e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.385068369e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.447502829e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323602608e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310901e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553725e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377665837e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953978118e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882300463e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238689e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.908036193e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858568085e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.003551912e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622598156e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117399824e-11, 9.622598156e-12
MLMG: Timers: Solve = 0.043767579 Iter = 0.04049372 Bottom = 0.023477158
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.321943624e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.440140597e-11
   Time per fluid step      0.163039614
   Time per step        0.163918839
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.178230108
Time spent in main      0.772814774

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.07-41-g5ca2c5e23267) finalized