Initializing AMReX (26.07-41-g5ca2c5e23267)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.07-41-g5ca2c5e23267) initialized
   MFIX git describe: 26.07-5-g8f9f7d1af1ef
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055100095 Iter = 0.048483056 Bottom = 0.026134134
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08930490435
MLMG: Iteration   2 Fine resid/bnorm = 0.003600801716
MLMG: Iteration   3 Fine resid/bnorm = 0.0001638472673
MLMG: Iteration   4 Fine resid/bnorm = 8.180269591e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.763363054e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.783716858e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.119271552e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.511022911e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.784678143e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.650460916e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.388827278e-12, 1.784678143e-12
MLMG: Timers: Solve = 0.069391255 Iter = 0.067537789 Bottom = 0.047522743
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192402995e-10
  * On level 1 max(abs(diveu)) = 1.554420646e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.84241524e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.017597848e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.11387995e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653249e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448558e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989387508e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873367716e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.881290699e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325444e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.959472867e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473595363e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.386521989e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049341636e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.832559835e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488130244e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623340765e-12, 1.488130244e-12
MLMG: Timers: Solve = 0.051165145 Iter = 0.047477834 Bottom = 0.026489136
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.831358422e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.007103036e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02359831076
MLMG: Iteration   2 Fine resid/bnorm = 0.001360112226
MLMG: Iteration   3 Fine resid/bnorm = 6.147903992e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.057436941e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.551549401e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.874660857e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.938806884e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.918153633e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.002522825e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.519599091e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.434021143e-12, 9.002522825e-13
MLMG: Timers: Solve = 0.065032438 Iter = 0.0641647 Bottom = 0.046954809
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767682212e-11
  * On level 1 max(abs(diveu)) = 4.653680089e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.611198109e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542633247e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.828892385e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960689051e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878592e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432348e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840828e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176344917e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012851739e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498487e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071162022e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358112159e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.138678137e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835792385e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271646091e-12, 1.835792385e-12
MLMG: Timers: Solve = 0.046094635 Iter = 0.042836484 Bottom = 0.025787712
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.60635632e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.824930594e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02228900321
MLMG: Iteration   2 Fine resid/bnorm = 0.00116730574
MLMG: Iteration   3 Fine resid/bnorm = 5.195192483e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.583257101e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.328951092e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.861163325e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.524033453e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.764745807e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.508132265e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.318751015e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.590904599e-12, 8.508132265e-13
MLMG: Timers: Solve = 0.06551631 Iter = 0.06464855 Bottom = 0.047378065
 >> After projection
  * On level 0 max(abs(diveu)) = 2.764031695e-11
  * On level 1 max(abs(diveu)) = 4.1810721e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.535444077e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617539482e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.730856864e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012713457e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342576e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377129258e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344060193e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142085e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.303821386e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386319436e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027879871e-12, 4.386319436e-12
MLMG: Timers: Solve = 0.040084207 Iter = 0.036854672 Bottom = 0.021882646
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.532704401e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.728353397e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.605872514

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02180766496
MLMG: Iteration   2 Fine resid/bnorm = 0.001144958399
MLMG: Iteration   3 Fine resid/bnorm = 5.084861996e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.535268834e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.308808838e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.788869461e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.47975987e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.729770971e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.34616314e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.364794435e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.530066778e-12, 8.34616314e-13
MLMG: Timers: Solve = 0.067078527 Iter = 0.066214805 Bottom = 0.048978762
 >> After projection
  * On level 0 max(abs(diveu)) = 3.036290041e-11
  * On level 1 max(abs(diveu)) = 3.237339207e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.316131944e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352363226e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.407296799e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323583725e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310874e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553082e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377667265e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.95395801e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881752342e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238827e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.906155068e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858566868e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.001281589e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.62265086e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117422375e-11, 9.62265086e-12
MLMG: Timers: Solve = 0.0434856 Iter = 0.040214501 Bottom = 0.023227534
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.310222097e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.399837234e-11
   Time per fluid step      0.164073687
   Time per step        0.164915389
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.179227274
Time spent in main      0.785099788

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.07-41-g5ca2c5e23267) finalized