Initializing AMReX (26.07-42-ge532c92d2de4)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.07-42-ge532c92d2de4) initialized
   MFIX git describe: 26.07-6-g80e4d716bb12
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.056244482 Iter = 0.049451394 Bottom = 0.026816771
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08918399972
MLMG: Iteration   2 Fine resid/bnorm = 0.003631209785
MLMG: Iteration   3 Fine resid/bnorm = 0.0001637751523
MLMG: Iteration   4 Fine resid/bnorm = 8.146968969e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.758500355e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.771184391e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.074608935e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.527191003e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.755083226e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.622238747e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.282882788e-12, 1.755083226e-12
MLMG: Timers: Solve = 0.071340776 Iter = 0.069456646 Bottom = 0.04934487
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192374084e-10
  * On level 1 max(abs(diveu)) = 1.526519041e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.783369892e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  2.989133106e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879948e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653189e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448539e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989385637e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873307225e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880255504e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.39232535e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.961468423e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473590998e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.402424081e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049345066e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.084226092e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488124007e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623313009e-12, 1.488124007e-12
MLMG: Timers: Solve = 0.048023676 Iter = 0.044743157 Bottom = 0.025480419
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.772581626e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.978609968e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.0236722157
MLMG: Iteration   2 Fine resid/bnorm = 0.001361572742
MLMG: Iteration   3 Fine resid/bnorm = 6.152137116e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.063812029e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.556743614e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.912756666e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.963566518e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.931715452e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.044577279e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.586711345e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.445391448e-12, 9.044577279e-13
MLMG: Timers: Solve = 0.065909194 Iter = 0.065015414 Bottom = 0.047373324
 >> After projection
  * On level 0 max(abs(diveu)) = 3.04494668e-11
  * On level 1 max(abs(diveu)) = 4.148141556e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.622617606e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542605011e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.824584492e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960689051e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878586e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432448e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406838725e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176340911e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012731532e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498438e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070260471e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.3581126e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.142685029e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835788629e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271643489e-12, 1.835788629e-12
MLMG: Timers: Solve = 0.047259473 Iter = 0.044014818 Bottom = 0.026729157
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.6176065e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.820208214e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02234213916
MLMG: Iteration   2 Fine resid/bnorm = 0.001167455927
MLMG: Iteration   3 Fine resid/bnorm = 5.200757736e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.589397807e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.333584106e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.884562125e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.529009291e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.762777857e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.531150249e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.344727352e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.597914058e-12, 8.531150249e-13
MLMG: Timers: Solve = 0.067464392 Iter = 0.066580937 Bottom = 0.049062674
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761918224e-11
  * On level 1 max(abs(diveu)) = 3.069579049e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.791356701e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617503599e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  3.007866488e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012779576e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342588e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576218e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.37713226e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344015166e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823141768e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304421742e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386315919e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027878245e-12, 4.386315919e-12
MLMG: Timers: Solve = 0.040775331 Iter = 0.037526728 Bottom = 0.022481001
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.787028194e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  3.003010412e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.611484043

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02207801821
MLMG: Iteration   2 Fine resid/bnorm = 0.001146839961
MLMG: Iteration   3 Fine resid/bnorm = 5.08201077e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.534879721e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.310359199e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.760649079e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.475960679e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.729767441e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.341309129e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.352548304e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.528595327e-12, 8.341309129e-13
MLMG: Timers: Solve = 0.067363029 Iter = 0.066449208 Bottom = 0.048956529
 >> After projection
  * On level 0 max(abs(diveu)) = 2.7590855e-11
  * On level 1 max(abs(diveu)) = 3.02940979e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.311346707e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.368239975e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.440569961e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323603373e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.6223109e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553598e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.37766681e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.95394082e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881729639e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.95723907e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.910533547e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858566706e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.006146566e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622636265e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.11741613e-11, 9.622636265e-12
MLMG: Timers: Solve = 0.045767872 Iter = 0.042349659 Bottom = 0.025045242
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.305145294e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.433218022e-11
   Time per fluid step      0.167724887
   Time per step        0.168628513
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.18347167
Time spent in main      0.794955713

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.07-42-ge532c92d2de4) finalized