Initializing AMReX (26.07-54-gaa5b8cc69640)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.07-54-gaa5b8cc69640) initialized
   MFIX git describe: 26.07-12-g6e50ba05645b
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055354482 Iter = 0.048693387 Bottom = 0.026250004
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08969745633
MLMG: Iteration   2 Fine resid/bnorm = 0.003585832166
MLMG: Iteration   3 Fine resid/bnorm = 0.000164667362
MLMG: Iteration   4 Fine resid/bnorm = 8.184007878e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.789937966e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.783322787e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.08576891e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.512288915e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.77593419e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.615725939e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.357525497e-12, 1.77593419e-12
MLMG: Timers: Solve = 0.069597859 Iter = 0.067742539 Bottom = 0.047751611
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192387448e-10
  * On level 1 max(abs(diveu)) = 1.497829368e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.836052305e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.008108004e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.11387995e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653359e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448514e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.98938757e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873293506e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880087129e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325444e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.969014122e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473590375e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.40180047e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049336647e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.926101552e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488127125e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623326887e-12, 1.488127125e-12
MLMG: Timers: Solve = 0.051661513 Iter = 0.047961697 Bottom = 0.026801095
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.825007877e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.997640413e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02370967376
MLMG: Iteration   2 Fine resid/bnorm = 0.001360460829
MLMG: Iteration   3 Fine resid/bnorm = 6.16247679e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.064215787e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.563160356e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.941346056e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.982039704e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.935013016e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.097862746e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.659469755e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.459798293e-12, 9.097862746e-13
MLMG: Timers: Solve = 0.064820018 Iter = 0.063954106 Bottom = 0.046715266
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767507652e-11
  * On level 1 max(abs(diveu)) = 3.089046127e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.614315739e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542661483e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.813098728e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960613755e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878582e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432508e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840428e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176379978e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012611325e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.03949838e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071462539e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358112592e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.145690197e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784246e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640454e-12, 1.835784246e-12
MLMG: Timers: Solve = 0.046012914 Iter = 0.042755092 Bottom = 0.025755445
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.609500156e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.808875845e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02244324339
MLMG: Iteration   2 Fine resid/bnorm = 0.001163639796
MLMG: Iteration   3 Fine resid/bnorm = 5.179602691e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.583356889e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.329476678e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.874684308e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.520391077e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.760873163e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.499961759e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.341936035e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.588416509e-12, 8.499961759e-13
MLMG: Timers: Solve = 0.066336416 Iter = 0.065446719 Bottom = 0.048200438
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761275918e-11
  * On level 1 max(abs(diveu)) = 3.311959031e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.532750418e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617479481e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.727881588e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012723928e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377129258e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344060193e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823141416e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304121564e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386316739e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027878625e-12, 4.386316739e-12
MLMG: Timers: Solve = 0.040216158 Iter = 0.036968311 Bottom = 0.022034594
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.530000968e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.725428107e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.607022711

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02194304758
MLMG: Iteration   2 Fine resid/bnorm = 0.001146277124
MLMG: Iteration   3 Fine resid/bnorm = 5.088792625e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.541193731e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.312321298e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.825486391e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.490097501e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.735909089e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.364520127e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.410231016e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.53563154e-12, 8.364520127e-13
MLMG: Timers: Solve = 0.067040295 Iter = 0.066098038 Bottom = 0.048872344
 >> After projection
  * On level 0 max(abs(diveu)) = 2.504135769e-11
  * On level 1 max(abs(diveu)) = 3.027508474e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.313629714e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352289805e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.404132168e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323616314e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621053e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310883e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553309e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377668984e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.95391909e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.88159342e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957239451e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.912836303e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858566625e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.97825403e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622648428e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117421334e-11, 9.622648428e-12
MLMG: Timers: Solve = 0.043652678 Iter = 0.040395918 Bottom = 0.023420922
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.307718653e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.396689118e-11
   Time per fluid step      0.164314453
   Time per step        0.165169333
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.179853031
Time spent in main      0.786875742

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.07-54-gaa5b8cc69640) finalized