Initializing AMReX (26.08-6-g09dcef899fc3)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-6-g09dcef899fc3) initialized
   MFIX git describe: 26.08-1-ga07946ccc65e
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055015206 Iter = 0.04835755 Bottom = 0.026050731
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08959252288
MLMG: Iteration   2 Fine resid/bnorm = 0.00359136494
MLMG: Iteration   3 Fine resid/bnorm = 0.00016373563
MLMG: Iteration   4 Fine resid/bnorm = 8.14861686e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.768547375e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.779219178e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.054553446e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.493233077e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.756368662e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.600994588e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.287484417e-12, 1.756368662e-12
MLMG: Timers: Solve = 0.07052233 Iter = 0.068634821 Bottom = 0.048706523
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192394101e-10
  * On level 1 max(abs(diveu)) = 1.497645906e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  3.351188414e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  6.916387149e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879951e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653319e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706449281e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989382395e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873269185e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.879482226e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325943e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.963526341e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473598481e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.373737954e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049346001e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.082004415e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488105299e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623229742e-12, 1.488105299e-12
MLMG: Timers: Solve = 0.052763767 Iter = 0.049078044 Bottom = 0.027318462
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  3.339794581e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  6.939643793e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.0236825395
MLMG: Iteration   2 Fine resid/bnorm = 0.001360090938
MLMG: Iteration   3 Fine resid/bnorm = 6.150048935e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.060512746e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.556147062e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.895095655e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.955801732e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.920661068e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.037551711e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.582348407e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.443491938e-12, 9.037551711e-13
MLMG: Timers: Solve = 0.065181956 Iter = 0.064235749 Bottom = 0.046832771
 >> After projection
  * On level 0 max(abs(diveu)) = 2.76755012e-11
  * On level 1 max(abs(diveu)) = 4.654372421e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.62039157e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.988030799e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.816757788e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  1.031942656e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878587e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432328e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840728e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176349926e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012731532e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498343e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071462539e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111469e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.135672969e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835792385e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271646091e-12, 1.835792385e-12
MLMG: Timers: Solve = 0.046348247 Iter = 0.043078966 Bottom = 0.02589003
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.615576174e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.812194481e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02179407774
MLMG: Iteration   2 Fine resid/bnorm = 0.00116412816
MLMG: Iteration   3 Fine resid/bnorm = 5.18026549e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.582641636e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.328631035e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.878269333e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.521071689e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.759842625e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.501455293e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.326897104e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.588871321e-12, 8.501455293e-13
MLMG: Timers: Solve = 0.066685353 Iter = 0.065808471 Bottom = 0.048536765
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761195843e-11
  * On level 1 max(abs(diveu)) = 3.242273984e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.517403187e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617531982e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.684327193e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012719163e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890289e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377127757e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344000158e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142178e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.303821386e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386313925e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027877324e-12, 4.386313925e-12
MLMG: Timers: Solve = 0.040309801 Iter = 0.037039036 Bottom = 0.022099435
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.515086596e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.681762652e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.611917362

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02172614112
MLMG: Iteration   2 Fine resid/bnorm = 0.001145376549
MLMG: Iteration   3 Fine resid/bnorm = 5.09759243e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.543798285e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.310315687e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.800000591e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.482773063e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.736913428e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.378552632e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.433349881e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.539885371e-12, 8.378552632e-13
MLMG: Timers: Solve = 0.06649845 Iter = 0.065634021 Bottom = 0.04838526
 >> After projection
  * On level 0 max(abs(diveu)) = 3.036370283e-11
  * On level 1 max(abs(diveu)) = 3.514835012e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.318714028e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352300614e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.413169231e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323577961e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310925e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553167e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377664864e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953962875e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882553442e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238559e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.908555123e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858562895e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.980848685e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622598156e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117399824e-11, 9.622598156e-12
MLMG: Timers: Solve = 0.043529867 Iter = 0.040298276 Bottom = 0.023235045
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.312783323e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.405680774e-11
   Time per fluid step      0.16359244
   Time per step        0.164454934
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.178681589
Time spent in main      0.790598951

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-6-g09dcef899fc3) finalized