Initializing AMReX (26.08-10-ged1c6c939883)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-10-ged1c6c939883) initialized
   MFIX git describe: 26.08-3-g98a92c2a4749
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055035555 Iter = 0.048349877 Bottom = 0.026114132
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08911209434
MLMG: Iteration   2 Fine resid/bnorm = 0.003613950064
MLMG: Iteration   3 Fine resid/bnorm = 0.0001651135947
MLMG: Iteration   4 Fine resid/bnorm = 8.166482717e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.805576911e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.803960111e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.161112786e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.511871896e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.691473182e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.525050593e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.055170254e-12, 1.691473182e-12
MLMG: Timers: Solve = 0.068883537 Iter = 0.067034672 Bottom = 0.047192321
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192376337e-10
  * On level 1 max(abs(diveu)) = 1.469939855e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.684412186e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  2.967354135e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879953e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653399e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.70644892e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989381397e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873286022e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.87961942e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392326816e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.972942874e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.4736016e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.322290009e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049354732e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.034337176e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488105299e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623229742e-12, 1.488105299e-12
MLMG: Timers: Solve = 0.051410712 Iter = 0.047673055 Bottom = 0.026521405
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.673932157e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.957372851e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02379870927
MLMG: Iteration   2 Fine resid/bnorm = 0.001363571897
MLMG: Iteration   3 Fine resid/bnorm = 6.164504961e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.062127235e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.55964449e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.920319051e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.966243111e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.927375432e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.061596964e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.603457329e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.449993077e-12, 9.061596964e-13
MLMG: Timers: Solve = 0.064844275 Iter = 0.063975327 Bottom = 0.046730571
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767401991e-11
  * On level 1 max(abs(diveu)) = 3.82579469e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  3.108626318e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542708543e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.524224904e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960387869e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878589e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432308e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406842031e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176346921e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.01281167e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498411e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070460816e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111587e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.142685029e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835786594e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.27164208e-12, 1.835786594e-12
MLMG: Timers: Solve = 0.046281349 Iter = 0.043010855 Bottom = 0.02592477
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  3.100414429e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.52665945e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02227808158
MLMG: Iteration   2 Fine resid/bnorm = 0.001167807905
MLMG: Iteration   3 Fine resid/bnorm = 5.195267989e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.590883113e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.332575513e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.924271319e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.543058608e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.764975109e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.537036528e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.371786037e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.599706553e-12, 8.537036528e-13
MLMG: Timers: Solve = 0.066716706 Iter = 0.065872479 Bottom = 0.048744599
 >> After projection
  * On level 0 max(abs(diveu)) = 2.820548962e-11
  * On level 1 max(abs(diveu)) = 5.18712885e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.941476833e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  4.056601325e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  3.282856537e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012723399e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377130759e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344000158e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823141709e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304721919e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386315098e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027877866e-12, 4.386315098e-12
MLMG: Timers: Solve = 0.040280776 Iter = 0.037045704 Bottom = 0.022105312
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.93623043e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  3.284620432e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.605868081

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.0219374177
MLMG: Iteration   2 Fine resid/bnorm = 0.001145967601
MLMG: Iteration   3 Fine resid/bnorm = 5.076394272e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.542461236e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.312950439e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.820542492e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.50134804e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.736288584e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.390202258e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.434208255e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.543416854e-12, 8.390202258e-13
MLMG: Timers: Solve = 0.066036828 Iter = 0.065128771 Bottom = 0.047964969
 >> After projection
  * On level 0 max(abs(diveu)) = 2.759148652e-11
  * On level 1 max(abs(diveu)) = 4.146036434e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.314579127e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  5.195198546e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.484829736e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323607549e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310966e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.31755316e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377661329e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.95394828e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882047484e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238429e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.911052478e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858559003e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.995767948e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622637076e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117416477e-11, 9.622637076e-12
MLMG: Timers: Solve = 0.043418913 Iter = 0.040137478 Bottom = 0.023213043
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.308669442e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.474804095e-11
   Time per fluid step      0.163168161
   Time per step        0.164012028
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.178065175
Time spent in main      0.783933256

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-10-ged1c6c939883) finalized