Initializing AMReX (26.08-11-g5273b558c130)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-11-g5273b558c130) initialized
   MFIX git describe: 26.08-6-gbf5680fc3e96
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 8
  eb_pad        = 8

================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================


================================================================================
Warning: Overwriting amr.plot_int with value from mfix.plot_int
================================================================================


================================================================================
Warning: Overwriting amr.plot_file with value from mfix.plot_file
================================================================================


================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Scalar diffusion coefficients
Tracer0: 0
Particle-particle conduction is disabled.
Particle-fluid-particle conduction is disabled.
Specified constant pressure drop: (1000,0,0)

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime


================================================================================
Warning: Regridding disabled for single level, single rank run.
================================================================================

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building cylinder geometry.
 
 Internal Flow: 1
 Radius:    0.49
 Height:    -1
 Direction: 0
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 1.5, 1.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
Auto generating particles ...
Total number of generated particles: 2,578
Time spent in initializing particles 0.02045975


****************************************
  Coverage report:  Grids        Cells
          regular:      0           45
          covered:      0         1000
              cut:      1           80
****************************************

Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  fluid-only                       0                 0                 0
  bed                          2,578             2,409               169
  ----------------  ----------------  ----------------  ----------------
  Total                        2,578             2,409               169
  ****************  ****************  ****************  ****************
On level 0: set volume fraction bcs
Setting original sum_vol to 0.644240679
On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 0 fillpatch tracer
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  1.301306859  1.301322376
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 0.4563612149  0.6312469473  0.6273563008
Doing initial pressure iterations with dt = 0.006801943661
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

In initial_iterations: iter = 0
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.010480227 Iter = 0.009851034 Bottom = 0.008564194
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.184663544  0.6154017352  0.6154968516
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.506464175  0.6802092129  0.7564588585
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.009951847 Iter = 0.009725803 Bottom = 0.008446084
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.438456254  0.6796567896  0.7561562011
   max(abs(gpx/gpy/gpz))  = 248.6965763  36.40014479  24.54807166
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.364336878  0.6780461341  0.8153984234
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.009962133 Iter = 0.009727496 Bottom = 0.008449277
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.369754936  0.6780598635  0.8152712253
   max(abs(gpx/gpy/gpz))  = 299.8915438  51.98863345  35.69580442
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.286687636  0.6737953888  0.8488246006
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
Enclosed domain volume is   0.644240679
Time spent in init      0.141173204

  Writing plotfile TracerAdv_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 1: from old_time 0 to new time 0.005958528374 with dt = 0.005958528374

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.613043032e-12, 8.864743363e-13
MLMG: Timers: Solve = 0.009956632 Iter = 0.009725245 Bottom = 0.008438963
 >> After projection
  * On level 0 max(abs(diveu)) = 2.61962213e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.351057075  0.6169658977  0.616579362
   max(abs(gpx/gpy/gpz))  = 316.1050941  57.71903643  40.5839384
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.727736976  0.6351815862  0.7015683164
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.784097074
MLMG: Initial rhs               = 3.371387861
MLMG: Initial residual (resid0) = 3.371387861
MLMG: Final Iter. 12 resid, resid/bnorm = 1.294520047e-12, 3.83972447e-13
MLMG: Timers: Solve = 0.009968869 Iter = 0.009742159 Bottom = 0.008456361
 >> After projection
  * On level 0 max(abs(diveu)) = 2.100781441e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.263541401  0.6122980239  0.6082174076
   max(abs(gpx/gpy/gpz))  = 290.7369498  46.28606072  32.11252583
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.486677121  0.6324634483  0.7071064359
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005958528374
done. 
   Time per fluid step      0.054844223
   Time per 1 particle steps 0.000304152
   Coupling time per step   0.004003927
Sum tracer volume wgt = 157.3298941 141.6039915
   Time per step        0.060652708

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 2: from old_time 0.005958528374 to new time 0.01131216883 with dt = 0.005353640456

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.931049538
MLMG: Initial rhs               = 3.477330915
MLMG: Initial residual (resid0) = 3.477330915
MLMG: Final Iter. 12 resid, resid/bnorm = 1.038946706e-12, 2.987770597e-13
MLMG: Timers: Solve = 0.009918866 Iter = 0.009696146 Bottom = 0.008420968
 >> After projection
  * On level 0 max(abs(diveu)) = 1.686275362e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.77173115  0.622265202  0.6946324203
   max(abs(gpx/gpy/gpz))  = 323.904294  48.1931275  33.66498854
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.66553021  0.6557454813  0.881634967
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.24285133
MLMG: Initial rhs               = 6.304108899
MLMG: Initial residual (resid0) = 6.304108899
MLMG: Final Iter. 12 resid, resid/bnorm = 7.82929277e-13, 1.241934887e-13
MLMG: Timers: Solve = 0.009929633 Iter = 0.009703119 Bottom = 0.008425003
 >> After projection
  * On level 0 max(abs(diveu)) = 1.273693841e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.55464151  0.6204199791  0.6776638648
   max(abs(gpx/gpy/gpz))  = 451.9016124  74.83842783  51.68679569
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.45494682  0.6519897684  0.8743317992
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005353640456
done. 
   Time per fluid step      0.053407646
   Time per 1 particle steps 0.000153834
   Coupling time per step   0.003219192
Sum tracer volume wgt = 157.6837259 141.6039915
   Time per step        0.058098742

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 3: from old_time 0.01131216883 to new time 0.01592458993 with dt = 0.004612421096

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.65418866
MLMG: Initial rhs               = 6.077636939
MLMG: Initial residual (resid0) = 6.077636939
MLMG: Final Iter. 12 resid, resid/bnorm = 8.555378628e-13, 1.407681754e-13
MLMG: Timers: Solve = 0.00993384 Iter = 0.009701871 Bottom = 0.008423703
 >> After projection
  * On level 0 max(abs(diveu)) = 1.385971791e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.88614333  0.6455286534  0.8480297851
   max(abs(gpx/gpy/gpz))  = 509.9185902  83.21679804  58.19597325
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.73934614  0.7893404504  1.091787554
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.25786394
MLMG: Initial rhs               = 11.19096957
MLMG: Initial residual (resid0) = 11.19096957
MLMG: Final Iter. 11 resid, resid/bnorm = 1.037443848e-11, 9.270366093e-13
MLMG: Timers: Solve = 0.008015767 Iter = 0.007778398 Bottom = 0.006720643
 >> After projection
  * On level 0 max(abs(diveu)) = 1.611239413e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.6667606  0.6455058367  0.8240571635
   max(abs(gpx/gpy/gpz))  = 617.6128372  104.4479134  74.90696666
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.5452717  0.7767543275  1.079063169
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004612421096
done. 
   Time per fluid step      0.050147628
   Time per 1 particle steps 0.000145123
   Coupling time per step   0.003259673
Sum tracer volume wgt = 158.2148613 141.6039915
   Time per step        0.054973538

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 4: from old_time 0.01592458993 to new time 0.02003269244 with dt = 0.004108102514

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.30774783
MLMG: Initial rhs               = 10.97744209
MLMG: Initial residual (resid0) = 10.97744209
MLMG: Final Iter. 12 resid, resid/bnorm = 1.381117443e-12, 1.258141406e-13
MLMG: Timers: Solve = 0.008788686 Iter = 0.008569714 Bottom = 0.007364315
 >> After projection
  * On level 0 max(abs(diveu)) = 2.250642727e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.26731519  0.6595228552  1.030158354
   max(abs(gpx/gpy/gpz))  = 666.9400626  110.3703325  80.49238072
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.89226003  0.9661537199  1.314430062
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 29.00988832
MLMG: Initial rhs               = 14.42861004
MLMG: Initial residual (resid0) = 14.42861004
MLMG: Final Iter. 11 resid, resid/bnorm = 8.442690991e-12, 5.851354334e-13
MLMG: Timers: Solve = 0.007998408 Iter = 0.007754705 Bottom = 0.006694071
 >> After projection
  * On level 0 max(abs(diveu)) = 1.370546282e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.04060922  0.6586642958  1.003166891
   max(abs(gpx/gpy/gpz))  = 749.7463096  123.6374059  93.8008454
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.70783691  0.9518888152  1.296940297
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004108102514
done. 
   Time per fluid step      0.048614176
   Time per 1 particle steps 0.000194605
   Coupling time per step   0.003026867
Sum tracer volume wgt = 158.8912987 141.6039915
   Time per step        0.053191407

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 5: from old_time 0.02003269244 to new time 0.02380401311 with dt = 0.003771320674

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 28.77922057
MLMG: Initial rhs               = 14.23850282
MLMG: Initial residual (resid0) = 14.23850282
MLMG: Final Iter. 11 resid, resid/bnorm = 8.898104475e-12, 6.24932592e-13
MLMG: Timers: Solve = 0.007968541 Iter = 0.007760541 Bottom = 0.006698762
 >> After projection
  * On level 0 max(abs(diveu)) = 1.444274985e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 21.10174176  0.8071147448  1.224321021
   max(abs(gpx/gpy/gpz))  = 789.5535991  127.1528493  97.67239052
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.35286951  1.171738235  1.536857314
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 36.30270227
MLMG: Initial rhs               = 16.52422288
MLMG: Initial residual (resid0) = 16.52422288
MLMG: Final Iter. 11 resid, resid/bnorm = 1.07595044e-11, 6.511352744e-13
MLMG: Timers: Solve = 0.008019256 Iter = 0.007739042 Bottom = 0.006676162
 >> After projection
  * On level 0 max(abs(diveu)) = 1.745493629e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 20.86599292  0.7802499295  1.196219755
   max(abs(gpx/gpy/gpz))  = 859.0063305  134.1755695  111.5197958
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.18752888  1.153777129  1.516515591
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003771320674
done. 
   Time per fluid step      0.047010752
   Time per 1 particle steps 0.000149666
   Coupling time per step   0.002919359
Sum tracer volume wgt = 159.6511637 141.6039915
   Time per step        0.051329501

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 6: from old_time 0.02380401311 to new time 0.02733835087 with dt = 0.003534337753

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 35.94395149
MLMG: Initial rhs               = 16.34530605
MLMG: Initial residual (resid0) = 16.34530605
MLMG: Final Iter. 11 resid, resid/bnorm = 1.048294784e-11, 6.41343014e-13
MLMG: Timers: Solve = 0.007994849 Iter = 0.007780572 Bottom = 0.00671341
 >> After projection
  * On level 0 max(abs(diveu)) = 1.702005895e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.51172241  1.011430449  1.420185648
   max(abs(gpx/gpy/gpz))  = 894.1597918  136.1882227  116.117816
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.58947351  1.389895166  1.751064469
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.22249661
MLMG: Initial rhs               = 18.01676068
MLMG: Initial residual (resid0) = 18.01676068
MLMG: Final Iter. 11 resid, resid/bnorm = 1.359824676e-11, 7.54755364e-13
MLMG: Timers: Solve = 0.008439226 Iter = 0.008183508 Bottom = 0.007006919
 >> After projection
  * On level 0 max(abs(diveu)) = 2.059378039e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.26945072  0.9848188818  1.390402643
   max(abs(gpx/gpy/gpz))  = 954.3123276  143.8909476  128.9497827
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.33167601  1.372721194  1.726641392
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003534337753
done. 
   Time per fluid step      0.04795543
   Time per 1 particle steps 0.000161607
   Coupling time per step   0.00294017
Sum tracer volume wgt = 160.4243322 141.6039915
   Time per step        0.052290703

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 7: from old_time 0.02733835087 to new time 0.03068404225 with dt = 0.003345691379

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 42.76594918
MLMG: Initial rhs               = 17.99753798
MLMG: Initial residual (resid0) = 17.99753798
MLMG: Final Iter. 11 resid, resid/bnorm = 1.441736538e-11, 8.010743133e-13
MLMG: Timers: Solve = 0.007972564 Iter = 0.007757607 Bottom = 0.006693822
 >> After projection
  * On level 0 max(abs(diveu)) = 2.195883624e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.57603141  1.20056661  1.606238656
   max(abs(gpx/gpy/gpz))  = 983.4910099  146.035585  132.7171032
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.58806488  1.590482547  1.946517062
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.7100149
MLMG: Initial rhs               = 19.26347138
MLMG: Initial residual (resid0) = 19.26347138
MLMG: Final Iter. 11 resid, resid/bnorm = 1.704109845e-11, 8.84632791e-13
MLMG: Timers: Solve = 0.007963825 Iter = 0.007755925 Bottom = 0.006694484
 >> After projection
  * On level 0 max(abs(diveu)) = 2.727090502e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.33434841  1.174620785  1.576227416
   max(abs(gpx/gpy/gpz))  = 1032.683533  152.3080511  143.5327708
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.32983181  1.571968263  1.92118696
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003345691379
done. 
   Time per fluid step      0.04723839
   Time per 1 particle steps 0.000171509
   Coupling time per step   0.002948952
Sum tracer volume wgt = 161.1357314 141.6039915
   Time per step        0.051715516

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 8: from old_time 0.03068404225 to new time 0.03386635551 with dt = 0.003182313268

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.18267049
MLMG: Initial rhs               = 19.22734118
MLMG: Initial residual (resid0) = 19.22734118
MLMG: Final Iter. 11 resid, resid/bnorm = 1.661697615e-11, 8.642368177e-13
MLMG: Timers: Solve = 0.007954753 Iter = 0.00774664 Bottom = 0.006686182
 >> After projection
  * On level 0 max(abs(diveu)) = 2.63641117e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.34934678  1.375014542  1.779071039
   max(abs(gpx/gpy/gpz))  = 1057.112401  153.769335  146.5369264
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.29801352  1.771134866  2.124579973
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.72335046
MLMG: Initial rhs               = 19.7026339
MLMG: Initial residual (resid0) = 19.7026339
MLMG: Final Iter. 12 resid, resid/bnorm = 3.535017497e-12, 1.794185242e-13
MLMG: Timers: Solve = 0.009085634 Iter = 0.008847613 Bottom = 0.007593394
 >> After projection
  * On level 0 max(abs(diveu)) = 5.407643028e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.10789348  1.351036828  1.749889636
   max(abs(gpx/gpy/gpz))  = 1097.899435  158.2997374  155.360904
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.04644907  1.75062212  2.099955003
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003182313268
done. 
   Time per fluid step      0.048446967
   Time per 1 particle steps 0.00016681
   Coupling time per step   0.002992107
Sum tracer volume wgt = 161.7362659 141.6039915
   Time per step        0.052873675

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 9: from old_time 0.03386635551 to new time 0.036918205 with dt = 0.00305184949

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.1743406
MLMG: Initial rhs               = 19.68228359
MLMG: Initial residual (resid0) = 19.68228359
MLMG: Final Iter. 12 resid, resid/bnorm = 3.486141691e-12, 1.771207936e-13
MLMG: Timers: Solve = 0.008682537 Iter = 0.008474861 Bottom = 0.007307065
 >> After projection
  * On level 0 max(abs(diveu)) = 5.334001476e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.87965437  1.534626127  2.018637668
   max(abs(gpx/gpy/gpz))  = 1118.579586  159.1578464  157.8271282
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.78308648  1.9291183  2.334359403
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 61.31428452
MLMG: Initial rhs               = 19.79060403
MLMG: Initial residual (resid0) = 19.79060403
MLMG: Final Iter. 12 resid, resid/bnorm = 5.425659921e-12, 2.741533262e-13
MLMG: Timers: Solve = 0.008660683 Iter = 0.008450947 Bottom = 0.007287279
 >> After projection
  * On level 0 max(abs(diveu)) = 8.784260742e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.63814505  1.512164329  1.98793966
   max(abs(gpx/gpy/gpz))  = 1152.29707  163.0796425  164.7868047
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.53563688  1.907506104  2.308401603
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.00305184949
done. 
   Time per fluid step      0.048852227
   Time per 1 particle steps 0.000140977
   Coupling time per step   0.003011394
Sum tracer volume wgt = 162.1804193 141.6039915
   Time per step        0.053454573

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 10: from old_time 0.036918205 to new time 0.03986431983 with dt = 0.002946114823

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 60.72695759
MLMG: Initial rhs               = 19.82071042
MLMG: Initial residual (resid0) = 19.82071042
MLMG: Final Iter. 12 resid, resid/bnorm = 5.294015226e-12, 2.6709513e-13
MLMG: Timers: Solve = 0.008664532 Iter = 0.008456561 Bottom = 0.007298119
 >> After projection
  * On level 0 max(abs(diveu)) = 8.566676824e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 30.21130943  1.676578058  2.251347171
   max(abs(gpx/gpy/gpz))  = 1169.853262  165.1235293  166.7941466
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 30.08186843  2.064296427  2.560169003
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 66.41490017
MLMG: Initial rhs               = 19.59618118
MLMG: Initial residual (resid0) = 19.59618118
MLMG: Final Iter. 12 resid, resid/bnorm = 5.66618974e-12, 2.891476501e-13
MLMG: Timers: Solve = 0.008728609 Iter = 0.008491483 Bottom = 0.007319458
 >> After projection
  * On level 0 max(abs(diveu)) = 9.128502321e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.97047858  1.655565553  2.218756677
   max(abs(gpx/gpy/gpz))  = 1198.137879  171.8421553  172.3355926
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.8363623  2.043197999  2.535049395
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.002946114823
done. 
   Time per fluid step      0.047502656
   Time per 1 particle steps 0.000177342
   Coupling time per step   0.002960041
Sum tracer volume wgt = 162.4514574 141.6039915
   Time per step        0.051962238
  Writing plotfile TracerAdv_plt00010 at time 0.03986431983
Time spent in main (after init) 0.548221851
Time spent in main      0.689395055

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6621 ... 6621]
[The         Arena] max space (MB) allocated spread across MPI: [97 ... 97]
[The         Arena] max space (MB) used      spread across MPI: [78 ... 78]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [0 ... 0]
AMReX (26.08-11-g5273b558c130) finalized