Initializing AMReX (26.08-15-g59d066aab774)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-15-g59d066aab774) initialized
   MFIX git describe: 26.08-8-g3116c3c76b43
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.054853481 Iter = 0.048207305 Bottom = 0.025947628
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08925210829
MLMG: Iteration   2 Fine resid/bnorm = 0.00360736045
MLMG: Iteration   3 Fine resid/bnorm = 0.0001644497731
MLMG: Iteration   4 Fine resid/bnorm = 8.240214202e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.797157075e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.797694233e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.168594919e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.543006347e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.761166626e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.609251898e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.304660266e-12, 1.761166626e-12
MLMG: Timers: Solve = 0.070248058 Iter = 0.068384104 Bottom = 0.048464413
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192400765e-10
  * On level 1 max(abs(diveu)) = 1.581791649e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.781755317e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  2.982784977e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.11387995e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653399e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.7064491e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989386822e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.87334776e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.879650601e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325475e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.959722311e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473584138e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.331955987e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.04935099e-11
MLMG: Iteration  11 Fine resid/bnorm = 6.953267688e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.48813648e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.62336852e-12, 1.48813648e-12
MLMG: Timers: Solve = 0.052239565 Iter = 0.048557576 Bottom = 0.026947284
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.770954353e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.972412807e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02379305153
MLMG: Iteration   2 Fine resid/bnorm = 0.001367586346
MLMG: Iteration   3 Fine resid/bnorm = 6.177783256e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.065292399e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.565552339e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.964814534e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.967588903e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.930950556e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.11775203e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.654208565e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.465175779e-12, 9.11775203e-13
MLMG: Timers: Solve = 0.064870703 Iter = 0.063993985 Bottom = 0.04673604
 >> After projection
  * On level 0 max(abs(diveu)) = 2.766788998e-11
  * On level 1 max(abs(diveu)) = 3.090346507e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.886345411e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542623835e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.102405253e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960914937e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878588e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432248e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406839727e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.17635193e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012851739e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498368e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071562711e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111907e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.144688474e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835779238e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271636984e-12, 1.835779238e-12
MLMG: Timers: Solve = 0.045874719 Iter = 0.042657242 Bottom = 0.02563606
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.879807556e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.094680186e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02233224515
MLMG: Iteration   2 Fine resid/bnorm = 0.001162263587
MLMG: Iteration   3 Fine resid/bnorm = 5.179701751e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.584258364e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.331586633e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.87817445e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.529054624e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.762163752e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.476768065e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.311516378e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.581353543e-12, 8.476768065e-13
MLMG: Timers: Solve = 0.065795048 Iter = 0.064887552 Bottom = 0.047551321
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761711128e-11
  * On level 1 max(abs(diveu)) = 4.425134671e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.769668716e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.762946139e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.971122016e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012738517e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342636e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377127757e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.34397014e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142389e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304271653e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386316857e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027878679e-12, 4.386316857e-12
MLMG: Timers: Solve = 0.040237261 Iter = 0.036970381 Bottom = 0.021935367
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.765419549e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.965498592e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.60764023

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02180885528
MLMG: Iteration   2 Fine resid/bnorm = 0.001145937468
MLMG: Iteration   3 Fine resid/bnorm = 5.088819436e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.538778327e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.314297693e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.77980659e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.46999157e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.73448907e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.357548002e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.347741411e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.533518e-12, 8.357548002e-13
MLMG: Timers: Solve = 0.066610277 Iter = 0.065710384 Bottom = 0.048519177
 >> After projection
  * On level 0 max(abs(diveu)) = 3.035701825e-11
  * On level 1 max(abs(diveu)) = 3.236308032e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.423032737e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.685119009e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.544178477e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323645726e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310932e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553485e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377664151e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953952496e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882040998e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238689e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.910306515e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858564193e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.993173294e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622701943e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117444233e-11, 9.622701943e-12
MLMG: Timers: Solve = 0.043619902 Iter = 0.040361334 Bottom = 0.023421681
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.414662845e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.533535258e-11
   Time per fluid step      0.164051126
   Time per step        0.164914828
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.179198607
Time spent in main      0.786838837

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-15-g59d066aab774) finalized