Initializing AMReX (26.08-15-g59d066aab774)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-15-g59d066aab774) initialized
   MFIX git describe: 26.08-8-g3116c3c76b43
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 8
  eb_pad        = 8

================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================


================================================================================
Warning: Overwriting amr.plot_int with value from mfix.plot_int
================================================================================


================================================================================
Warning: Overwriting amr.plot_file with value from mfix.plot_file
================================================================================


================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Scalar diffusion coefficients
Tracer0: 0
Particle-particle conduction is disabled.
Particle-fluid-particle conduction is disabled.
Specified constant pressure drop: (1000,0,0)

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime


================================================================================
Warning: Regridding disabled for single level, single rank run.
================================================================================

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building cylinder geometry.
 
 Internal Flow: 1
 Radius:    0.49
 Height:    -1
 Direction: 0
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 1.5, 1.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
Auto generating particles ...
Total number of generated particles: 2,578
Time spent in initializing particles 0.020308144


****************************************
  Coverage report:  Grids        Cells
          regular:      0           45
          covered:      0         1000
              cut:      1           80
****************************************

Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  fluid-only                       0                 0                 0
  bed                          2,578             2,409               169
  ----------------  ----------------  ----------------  ----------------
  Total                        2,578             2,409               169
  ****************  ****************  ****************  ****************
On level 0: set volume fraction bcs
Setting original sum_vol to 0.644240679
On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 0 fillpatch tracer
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  1.301306859  1.301322376
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 0.4563612149  0.6312469473  0.6273563008
Doing initial pressure iterations with dt = 0.006801943661
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

In initial_iterations: iter = 0
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.010572942 Iter = 0.009945601 Bottom = 0.008628614
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.177706743  0.6153982656  0.615494664
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.510684238  0.6803686315  0.7566621156
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.00997226 Iter = 0.009745402 Bottom = 0.008460676
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.442595737  0.679814624  0.7563589021
   max(abs(gpx/gpy/gpz))  = 248.4857004  36.45251398  24.55331707
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.368330214  0.6781384742  0.8155458822
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.010319768 Iter = 0.010067135 Bottom = 0.008697708
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.37376212  0.6781527668  0.8154187545
   max(abs(gpx/gpy/gpz))  = 299.6257877  52.02684304  35.65171216
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.290669692  0.6738011096  0.8488943995
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
Enclosed domain volume is   0.644240679
Time spent in init      0.140735413

  Writing plotfile TracerAdv_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 1: from old_time 0 to new time 0.00595916961 with dt = 0.00595916961

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 1.61293201e-12, 8.864133221e-13
MLMG: Timers: Solve = 0.009325821 Iter = 0.00910592 Bottom = 0.007880243
 >> After projection
  * On level 0 max(abs(diveu)) = 2.619939864e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.346348236  0.616961491  0.6165762531
   max(abs(gpx/gpy/gpz))  = 315.8131502  57.75785037  40.53096221
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.731822294  0.6353541964  0.7017535263
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.772214194
MLMG: Initial rhs               = 3.376840886
MLMG: Initial residual (resid0) = 3.376840886
MLMG: Final Iter. 12 resid, resid/bnorm = 1.28408395e-12, 3.802619056e-13
MLMG: Timers: Solve = 0.009299975 Iter = 0.009050522 Bottom = 0.00782512
 >> After projection
  * On level 0 max(abs(diveu)) = 2.084912921e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.261588221  0.6122774729  0.6081901314
   max(abs(gpx/gpy/gpz))  = 290.5437304  46.31593463  32.11193841
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.488767723  0.6325039995  0.7071313272
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.00595916961
done. 
   Time per fluid step      0.053468189
   Time per 1 particle steps 0.000287896
   Coupling time per step   0.003694501
Sum tracer volume wgt = 157.3467094 141.616939
   Time per step        0.058911362

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 2: from old_time 0.00595916961 to new time 0.01131190237 with dt = 0.005352732759

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.92694583
MLMG: Initial rhs               = 3.479346201
MLMG: Initial residual (resid0) = 3.479346201
MLMG: Final Iter. 12 resid, resid/bnorm = 1.034949904e-12, 2.974552815e-13
MLMG: Timers: Solve = 0.009295479 Iter = 0.009069447 Bottom = 0.007837217
 >> After projection
  * On level 0 max(abs(diveu)) = 1.678177696e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.77482805  0.6223037075  0.6946547629
   max(abs(gpx/gpy/gpz))  = 323.8388233  48.20055852  33.66071691
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.66876142  0.6557713213  0.8816654357
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.22212487
MLMG: Initial rhs               = 6.306994262
MLMG: Initial residual (resid0) = 6.306994262
MLMG: Final Iter. 11 resid, resid/bnorm = 6.284306409e-12, 9.964027471e-13
MLMG: Timers: Solve = 0.008555589 Iter = 0.008290613 Bottom = 0.007170399
 >> After projection
  * On level 0 max(abs(diveu)) = 1.022063415e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.55760563  0.6204442841  0.6776757533
   max(abs(gpx/gpy/gpz))  = 451.775894  74.85274022  51.68831846
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.45599319  0.6519663509  0.8743259313
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005352732759
done. 
   Time per fluid step      0.051758294
   Time per 1 particle steps 0.000202735
   Coupling time per step   0.003124596
Sum tracer volume wgt = 157.7018116 141.6185559
   Time per step        0.056452343

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 3: from old_time 0.01131190237 to new time 0.01592376843 with dt = 0.004611866062

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.63586202
MLMG: Initial rhs               = 6.080404635
MLMG: Initial residual (resid0) = 6.080404635
MLMG: Final Iter. 12 resid, resid/bnorm = 8.508749261e-13, 1.399372208e-13
MLMG: Timers: Solve = 0.00928458 Iter = 0.009029824 Bottom = 0.007805203
 >> After projection
  * On level 0 max(abs(diveu)) = 1.380452306e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.88916266  0.6454910025  0.8480198945
   max(abs(gpx/gpy/gpz))  = 509.7946746  83.22822432  58.19145082
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.74040746  0.7895520659  1.091717958
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.23523405
MLMG: Initial rhs               = 11.20016577
MLMG: Initial residual (resid0) = 11.20016577
MLMG: Final Iter. 11 resid, resid/bnorm = 1.033114848e-11, 9.224103193e-13
MLMG: Timers: Solve = 0.008513608 Iter = 0.00829568 Bottom = 0.007171146
 >> After projection
  * On level 0 max(abs(diveu)) = 1.603483084e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.66958233  0.6454633013  0.8240349974
   max(abs(gpx/gpy/gpz))  = 617.4920703  104.4503981  74.89609812
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.5463164  0.776959283  1.078959611
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004611866062
done. 
   Time per fluid step      0.051281241
   Time per 1 particle steps 0.000188734
   Coupling time per step   0.003057469
Sum tracer volume wgt = 158.2340903 141.6200256
   Time per step        0.056060197

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 4: from old_time 0.01592376843 to new time 0.02003145688 with dt = 0.004107688446

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.28717334
MLMG: Initial rhs               = 10.9831161
MLMG: Initial residual (resid0) = 10.9831161
MLMG: Final Iter. 12 resid, resid/bnorm = 1.37712064e-12, 1.253852392e-13
MLMG: Timers: Solve = 0.009252453 Iter = 0.009027035 Bottom = 0.00780656
 >> After projection
  * On level 0 max(abs(diveu)) = 2.248028234e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.27034  0.6593357824  1.030043127
   max(abs(gpx/gpy/gpz))  = 666.8209938  110.3702488  80.48107039
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.89328822  0.9663295446  1.314270928
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 28.9905483
MLMG: Initial rhs               = 14.43426612
MLMG: Initial residual (resid0) = 14.43426612
MLMG: Final Iter. 11 resid, resid/bnorm = 8.388845174e-12, 5.811757319e-13
MLMG: Timers: Solve = 0.008323069 Iter = 0.008077502 Bottom = 0.006932521
 >> After projection
  * On level 0 max(abs(diveu)) = 1.363341902e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.04343765  0.6584795799  1.003053697
   max(abs(gpx/gpy/gpz))  = 749.658114  123.6255125  93.71249393
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.7088261  0.9520642193  1.296762781
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004107688446
done. 
   Time per fluid step      0.051363613
   Time per 1 particle steps 0.00018567
   Coupling time per step   0.002974765
Sum tracer volume wgt = 158.9108682 141.6207652
   Time per step        0.056043333

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 5: from old_time 0.02003145688 to new time 0.02380248635 with dt = 0.003771029477

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 28.76167681
MLMG: Initial rhs               = 14.24290424
MLMG: Initial residual (resid0) = 14.24290424
MLMG: Final Iter. 11 resid, resid/bnorm = 8.541056751e-12, 5.996710084e-13
MLMG: Timers: Solve = 0.0079842 Iter = 0.007761491 Bottom = 0.00669142
 >> After projection
  * On level 0 max(abs(diveu)) = 1.387830986e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 21.10475277  0.8074460178  1.224144275
   max(abs(gpx/gpy/gpz))  = 789.4706809  127.1417146  97.66013717
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.35389422  1.171582567  1.536614197
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 36.29166513
MLMG: Initial rhs               = 16.52740804
MLMG: Initial residual (resid0) = 16.52740804
MLMG: Final Iter. 11 resid, resid/bnorm = 1.074873524e-11, 6.503581933e-13
MLMG: Timers: Solve = 0.008049393 Iter = 0.007809958 Bottom = 0.006733691
 >> After projection
  * On level 0 max(abs(diveu)) = 1.746829925e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 20.86878542  0.7805625049  1.196057317
   max(abs(gpx/gpy/gpz))  = 858.8290958  134.1482989  111.4951788
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.1884177  1.154301249  1.516262048
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003771029477
done. 
   Time per fluid step      0.049237026
   Time per 1 particle steps 0.000146966
   Coupling time per step   0.003075899
Sum tracer volume wgt = 159.6705711 141.6209592
   Time per step        0.053810602

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 6: from old_time 0.02380248635 to new time 0.02733663705 with dt = 0.003534150698

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 35.93330678
MLMG: Initial rhs               = 16.34860879
MLMG: Initial residual (resid0) = 16.34860879
MLMG: Final Iter. 11 resid, resid/bnorm = 1.049582643e-11, 6.420011982e-13
MLMG: Timers: Solve = 0.008019638 Iter = 0.007785661 Bottom = 0.006708015
 >> After projection
  * On level 0 max(abs(diveu)) = 1.705230437e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.51464422  1.011803915  1.419967059
   max(abs(gpx/gpy/gpz))  = 893.9917838  136.219109  116.089389
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.59181687  1.390452783  1.750730245
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.21930679
MLMG: Initial rhs               = 18.02288726
MLMG: Initial residual (resid0) = 18.02288726
MLMG: Final Iter. 11 resid, resid/bnorm = 1.364891801e-11, 7.573102917e-13
MLMG: Timers: Solve = 0.007998691 Iter = 0.00777546 Bottom = 0.006704028
 >> After projection
  * On level 0 max(abs(diveu)) = 2.065798072e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.27225387  0.9851813845  1.39018884
   max(abs(gpx/gpy/gpz))  = 954.162789  143.9308755  128.9252329
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.33388755  1.373288013  1.726326652
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003534150698
done. 
   Time per fluid step      0.049290868
   Time per 1 particle steps 0.000207851
   Coupling time per step   0.003033315
Sum tracer volume wgt = 160.4435904 141.6211186
   Time per step        0.053814663

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 7: from old_time 0.02733663705 to new time 0.03068199652 with dt = 0.003345359467

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 42.76280474
MLMG: Initial rhs               = 18.00409083
MLMG: Initial residual (resid0) = 18.00409083
MLMG: Final Iter. 11 resid, resid/bnorm = 1.447561736e-11, 8.040182364e-13
MLMG: Timers: Solve = 0.007978862 Iter = 0.00776874 Bottom = 0.006692451
 >> After projection
  * On level 0 max(abs(diveu)) = 2.20105451e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.57881093  1.201001206  1.605970529
   max(abs(gpx/gpy/gpz))  = 983.3553284  146.0738096  132.6989015
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.59020085  1.591116722  1.946160105
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.71338297
MLMG: Initial rhs               = 19.26664229
MLMG: Initial residual (resid0) = 19.26664229
MLMG: Final Iter. 11 resid, resid/bnorm = 1.713007237e-11, 8.891052274e-13
MLMG: Timers: Solve = 0.00810927 Iter = 0.007871409 Bottom = 0.006782251
 >> After projection
  * On level 0 max(abs(diveu)) = 2.745130504e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.33701168  1.175050577  1.575970042
   max(abs(gpx/gpy/gpz))  = 1032.576096  152.3391898  143.5249955
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.33195328  1.57257648  1.920858498
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003345359467
done. 
   Time per fluid step      0.049217441
   Time per 1 particle steps 0.000187969
   Coupling time per step   0.003005875
Sum tracer volume wgt = 161.1545723 141.6209988
   Time per step        0.053672714

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 8: from old_time 0.03068199652 to new time 0.03386405748 with dt = 0.003182060963

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.18664815
MLMG: Initial rhs               = 19.23061442
MLMG: Initial residual (resid0) = 19.23061442
MLMG: Final Iter. 11 resid, resid/bnorm = 1.668600076e-11, 8.676790245e-13
MLMG: Timers: Solve = 0.007986511 Iter = 0.007763137 Bottom = 0.006693924
 >> After projection
  * On level 0 max(abs(diveu)) = 2.651807628e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.3518895  1.375523137  1.778804453
   max(abs(gpx/gpy/gpz))  = 1057.019097  153.7979608  146.5357706
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.30007976  1.771788896  2.124275232
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.73408911
MLMG: Initial rhs               = 19.70490582
MLMG: Initial residual (resid0) = 19.70490582
MLMG: Final Iter. 12 resid, resid/bnorm = 3.547785054e-12, 1.800457757e-13
MLMG: Timers: Solve = 0.008732044 Iter = 0.00848211 Bottom = 0.007313879
 >> After projection
  * On level 0 max(abs(diveu)) = 5.449765416e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.11033243  1.351550479  1.749625964
   max(abs(gpx/gpy/gpz))  = 1097.826056  158.3219706  155.3719077
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.04847517  1.751273771  2.099663621
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003182060963
done. 
   Time per fluid step      0.050214788
   Time per 1 particle steps 0.000177398
   Coupling time per step   0.003064931
Sum tracer volume wgt = 161.7550373 141.621184
   Time per step        0.054842529

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 9: from old_time 0.03386405748 to new time 0.03691572276 with dt = 0.003051665282

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.18510835
MLMG: Initial rhs               = 19.68464648
MLMG: Initial residual (resid0) = 19.68464648
MLMG: Final Iter. 12 resid, resid/bnorm = 3.498310769e-12, 1.777177341e-13
MLMG: Timers: Solve = 0.008699148 Iter = 0.00847193 Bottom = 0.007303619
 >> After projection
  * On level 0 max(abs(diveu)) = 5.380045602e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.88199108  1.535204649  2.018713422
   max(abs(gpx/gpy/gpz))  = 1118.517467  159.1765251  157.8442988
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.78506425  1.9298318  2.33461708
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 61.33075228
MLMG: Initial rhs               = 19.79225691
MLMG: Initial residual (resid0) = 19.79225691
MLMG: Final Iter. 12 resid, resid/bnorm = 5.467376551e-12, 2.762381559e-13
MLMG: Timers: Solve = 0.008682884 Iter = 0.008473103 Bottom = 0.007304943
 >> After projection
  * On level 0 max(abs(diveu)) = 8.835388605e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.640378  1.512737378  1.987998304
   max(abs(gpx/gpy/gpz))  = 1152.215415  162.9820752  164.816618
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.53756121  1.908211092  2.308652418
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003051665282
done. 
   Time per fluid step      0.050166103
   Time per 1 particle steps 0.000173999
   Coupling time per step   0.003008925
Sum tracer volume wgt = 162.1992078 141.6214309
   Time per step        0.054708811

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 10: from old_time 0.03691572276 to new time 0.03986164823 with dt = 0.002945925464

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 60.74295274
MLMG: Initial rhs               = 19.82244904
MLMG: Initial residual (resid0) = 19.82244904
MLMG: Final Iter. 12 resid, resid/bnorm = 5.333400388e-12, 2.690586e-13
MLMG: Timers: Solve = 0.008695205 Iter = 0.008472791 Bottom = 0.007304559
 >> After projection
  * On level 0 max(abs(diveu)) = 8.638284883e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 30.2134327  1.677222302  2.251466303
   max(abs(gpx/gpy/gpz))  = 1169.767722  165.0243576  166.828366
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 30.08368486  2.065055326  2.560493823
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 66.43466107
MLMG: Initial rhs               = 19.59720475
MLMG: Initial residual (resid0) = 19.59720475
MLMG: Final Iter. 12 resid, resid/bnorm = 5.706504713e-12, 2.911897276e-13
MLMG: Timers: Solve = 0.008704497 Iter = 0.008468097 Bottom = 0.007301473
 >> After projection
  * On level 0 max(abs(diveu)) = 9.20737286e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.97255457  1.6562046  2.218865593
   max(abs(gpx/gpy/gpz))  = 1198.054354  171.739573  172.3706346
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.83814984  2.04394263  2.535358278
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.002945925464
done. 
   Time per fluid step      0.048929758
   Time per 1 particle steps 0.000176236
   Coupling time per step   0.002896664
Sum tracer volume wgt = 162.4701384 141.6214457
   Time per step        0.053381605
  Writing plotfile TracerAdv_plt00010 at time 0.03986164823
Time spent in main (after init) 0.559392841
Time spent in main      0.700128254

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6621 ... 6621]
[The         Arena] max space (MB) allocated spread across MPI: [97 ... 97]
[The         Arena] max space (MB) used      spread across MPI: [78 ... 78]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [0 ... 0]
AMReX (26.08-15-g59d066aab774) finalized