Initializing AMReX (26.08-16-g6e875b7cc1a4)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-16-g6e875b7cc1a4) initialized
   MFIX git describe: 26.08-8-g3116c3c76b43
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.056466368 Iter = 0.049730676 Bottom = 0.026955415
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08937236912
MLMG: Iteration   2 Fine resid/bnorm = 0.003608940858
MLMG: Iteration   3 Fine resid/bnorm = 0.0001648463479
MLMG: Iteration   4 Fine resid/bnorm = 8.173756923e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.793950509e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.796863598e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.191563266e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.549913322e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.743723561e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.623518049e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.242217226e-12, 1.743723561e-12
MLMG: Timers: Solve = 0.070990978 Iter = 0.069107686 Bottom = 0.048634306
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192387425e-10
  * On level 1 max(abs(diveu)) = 1.554232462e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.823600234e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.002025631e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879949e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653209e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706449736e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989388693e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873360856e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880186907e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392324945e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.96128134e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473592869e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.374361566e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049346001e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.560626205e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488036702e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.622924431e-12, 1.488036702e-12
MLMG: Timers: Solve = 0.050049664 Iter = 0.046285657 Bottom = 0.026013172
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.81261502e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.991550618e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02367808501
MLMG: Iteration   2 Fine resid/bnorm = 0.001363456957
MLMG: Iteration   3 Fine resid/bnorm = 6.184026416e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.077056633e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.55912178e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.92794251e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.968885911e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.932523887e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.060805351e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.599543516e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.449779048e-12, 9.060805351e-13
MLMG: Timers: Solve = 0.065700436 Iter = 0.064821109 Bottom = 0.047522278
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767180808e-11
  * On level 1 max(abs(diveu)) = 3.871894922e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.613505852e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542605011e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.813825623e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960689051e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.74187859e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432298e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406839526e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.17635794e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012751567e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498385e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070060127e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111701e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.148695365e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784716e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640779e-12, 1.835784716e-12
MLMG: Timers: Solve = 0.046333198 Iter = 0.043093125 Bottom = 0.025981551
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.608663358e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.80961703e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02206201594
MLMG: Iteration   2 Fine resid/bnorm = 0.001162890783
MLMG: Iteration   3 Fine resid/bnorm = 5.181265776e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.585014379e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.331426961e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.888587724e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.516768292e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.751462146e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.485026426e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.331454356e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.583868387e-12, 8.485026426e-13
MLMG: Timers: Solve = 0.066594889 Iter = 0.065732656 Bottom = 0.048433208
 >> After projection
  * On level 0 max(abs(diveu)) = 2.762060146e-11
  * On level 1 max(abs(diveu)) = 3.072416112e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.530616551e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617641396e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.725331885e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012733046e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.1073426e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377126256e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.343955131e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.82314185e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304421742e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386318029e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027879221e-12, 4.386318029e-12
MLMG: Timers: Solve = 0.040448917 Iter = 0.037172468 Bottom = 0.022082021
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.527845338e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.722877574e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.612237509

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02178625524
MLMG: Iteration   2 Fine resid/bnorm = 0.001148138603
MLMG: Iteration   3 Fine resid/bnorm = 5.102476538e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.545086455e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.31505174e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.833081338e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.490586962e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.743945566e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.38781938e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.427799065e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.542694505e-12, 8.38781938e-13
MLMG: Timers: Solve = 0.066976489 Iter = 0.066095851 Bottom = 0.048842563
 >> After projection
  * On level 0 max(abs(diveu)) = 2.762107126e-11
  * On level 1 max(abs(diveu)) = 4.141091854e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.318006813e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352368777e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.411108897e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323609667e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621053e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.62231089e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553306e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377665837e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953986875e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882034511e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238413e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.9135174e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.85856922e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.993173294e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622635455e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117415783e-11, 9.622635455e-12
MLMG: Timers: Solve = 0.044073396 Iter = 0.040811865 Bottom = 0.023620473
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.31207964e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.403605958e-11
   Time per fluid step      0.164731046
   Time per step        0.165572439
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.180278185
Time spent in main      0.792515694

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-16-g6e875b7cc1a4) finalized