Initializing AMReX (26.08-16-g6e875b7cc1a4)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-16-g6e875b7cc1a4) initialized
   MFIX git describe: 26.08-8-g3116c3c76b43
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055466846 Iter = 0.048800526 Bottom = 0.026417377
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08889311914
MLMG: Iteration   2 Fine resid/bnorm = 0.003577801937
MLMG: Iteration   3 Fine resid/bnorm = 0.0001632839403
MLMG: Iteration   4 Fine resid/bnorm = 8.161148553e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.740235546e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.770251243e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.07436545e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.476640492e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.780418269e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.603863325e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.373577692e-12, 1.780418269e-12
MLMG: Timers: Solve = 0.07046282 Iter = 0.068581726 Bottom = 0.048418863
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192407608e-10
  * On level 1 max(abs(diveu)) = 1.497650519e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.8410832e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.015359958e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.11387995e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653209e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448514e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989386011e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873344642e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880143254e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392326629e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.962216757e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473594116e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.36313656e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049352549e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.359511511e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488124007e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623313009e-12, 1.488124007e-12
MLMG: Timers: Solve = 0.047523156 Iter = 0.044250834 Bottom = 0.025061064
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.830028852e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.004868322e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02373397519
MLMG: Iteration   2 Fine resid/bnorm = 0.001360948023
MLMG: Iteration   3 Fine resid/bnorm = 6.150847008e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.065298597e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.555876995e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.868685903e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.942483432e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.92421838e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.022065777e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.528004163e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.43930499e-12, 9.022065777e-13
MLMG: Timers: Solve = 0.065101503 Iter = 0.064215361 Bottom = 0.046885116
 >> After projection
  * On level 0 max(abs(diveu)) = 2.800788826e-11
  * On level 1 max(abs(diveu)) = 4.65403788e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.620089743e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542680307e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.815632898e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960312573e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878588e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432568e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406838925e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176344917e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012931877e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498373e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.069158576e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111708e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.144688474e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835781585e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.27163861e-12, 1.835781585e-12
MLMG: Timers: Solve = 0.046368998 Iter = 0.043091733 Bottom = 0.025984008
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.615298287e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.811458848e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02233290949
MLMG: Iteration   2 Fine resid/bnorm = 0.001166813919
MLMG: Iteration   3 Fine resid/bnorm = 5.196819878e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.590429691e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.331759516e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.892907638e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.531216997e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.761690214e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.522804034e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.328036417e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.59537246e-12, 8.522804034e-13
MLMG: Timers: Solve = 0.065531363 Iter = 0.064678418 Bottom = 0.047431931
 >> After projection
  * On level 0 max(abs(diveu)) = 3.038786936e-11
  * On level 1 max(abs(diveu)) = 3.240337114e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.538968131e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617629925e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.743012532e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012773635e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342636e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377130759e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344030175e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142448e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304121564e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386314746e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027877703e-12, 4.386314746e-12
MLMG: Timers: Solve = 0.040642159 Iter = 0.037387698 Bottom = 0.022352476
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.536192172e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.740526065e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.603593615

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02231292981
MLMG: Iteration   2 Fine resid/bnorm = 0.001148751589
MLMG: Iteration   3 Fine resid/bnorm = 5.107749919e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.546379054e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.316437296e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.830462749e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.496946952e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.7414559e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.400881083e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.431175335e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.546654047e-12, 8.400881083e-13
MLMG: Timers: Solve = 0.066122914 Iter = 0.065218954 Bottom = 0.047944777
 >> After projection
  * On level 0 max(abs(diveu)) = 3.103166569e-11
  * On level 1 max(abs(diveu)) = 4.356199793e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.433856611e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352472162e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.576033084e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323576784e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621055e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310938e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553647e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377661459e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953978118e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882002078e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238932e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.907582128e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.85856922e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.998038271e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622674374e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117432437e-11, 9.622674374e-12
MLMG: Timers: Solve = 0.043791973 Iter = 0.040506761 Bottom = 0.023541447
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.42588644e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.564913778e-11
   Time per fluid step      0.163616191
   Time per step        0.164480101
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.178482942
Time spent in main      0.782076557

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-16-g6e875b7cc1a4) finalized