Initializing AMReX (26.08-21-g3b31af42a8b8)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-21-g3b31af42a8b8) initialized
   MFIX git describe: 26.08-9-g809ffbd271da
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055139781 Iter = 0.048406718 Bottom = 0.026060364
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08915904087
MLMG: Iteration   2 Fine resid/bnorm = 0.003577388519
MLMG: Iteration   3 Fine resid/bnorm = 0.000164238056
MLMG: Iteration   4 Fine resid/bnorm = 8.230099943e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.79908949e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.796635956e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.1017684e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.518675738e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.771719157e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.607739996e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.342436433e-12, 1.771719157e-12
MLMG: Timers: Solve = 0.07010975 Iter = 0.068225703 Bottom = 0.048207633
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192387472e-10
  * On level 1 max(abs(diveu)) = 1.554375892e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.868692479e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.02406319e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879949e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653329e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706447872e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989387134e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873324686e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880105837e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325693e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.9590987e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473591934e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.41271367e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049341012e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.720309773e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488111535e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623257498e-12, 1.488111535e-12
MLMG: Timers: Solve = 0.051820232 Iter = 0.048102402 Bottom = 0.026765714
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.857557194e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.013645737e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02363589369
MLMG: Iteration   2 Fine resid/bnorm = 0.001366418058
MLMG: Iteration   3 Fine resid/bnorm = 6.180919577e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.083227604e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.569593831e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.957791326e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.992202336e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.94578143e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.150257649e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.671788639e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.473964356e-12, 9.150257649e-13
MLMG: Timers: Solve = 0.064047052 Iter = 0.063175026 Bottom = 0.046107699
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767445966e-11
  * On level 1 max(abs(diveu)) = 4.153924257e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.863099343e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542595599e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.067843242e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960689051e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948039e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878593e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432408e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406837423e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.17636395e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012781618e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498431e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070861505e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358112032e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.150698811e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784872e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640887e-12, 1.835784872e-12
MLMG: Timers: Solve = 0.045757883 Iter = 0.042531106 Bottom = 0.02562408
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.85670049e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.059829288e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02239462691
MLMG: Iteration   2 Fine resid/bnorm = 0.001168619833
MLMG: Iteration   3 Fine resid/bnorm = 5.197937169e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.592904643e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.332361973e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.903281123e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.521972201e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.758456275e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.489682736e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.281267617e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.585286331e-12, 8.489682736e-13
MLMG: Timers: Solve = 0.065311996 Iter = 0.064400128 Bottom = 0.047322171
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761950721e-11
  * On level 1 max(abs(diveu)) = 4.180845596e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.52785822e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.805334921e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.752915794e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012726046e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377130759e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344030175e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823141991e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.30457183e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386314511e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027877595e-12, 4.386314511e-12
MLMG: Timers: Solve = 0.040157297 Iter = 0.036943814 Bottom = 0.022100112
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.525368258e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.753083421e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.606050971

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02178475203
MLMG: Iteration   2 Fine resid/bnorm = 0.001148563074
MLMG: Iteration   3 Fine resid/bnorm = 5.093573829e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.544869614e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.313037285e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.829356026e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.491986506e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.741999549e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.382700605e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.410459916e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.541142793e-12, 8.382700605e-13
MLMG: Timers: Solve = 0.06603187 Iter = 0.065162084 Bottom = 0.047894453
 >> After projection
  * On level 0 max(abs(diveu)) = 2.759140845e-11
  * On level 1 max(abs(diveu)) = 3.237221497e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.428181784e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352302159e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.565663479e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323601843e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310897e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553352e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377663632e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.954016714e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881930725e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238965e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.909755151e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858565652e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.970470067e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622612751e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117406069e-11, 9.622612751e-12
MLMG: Timers: Solve = 0.043205383 Iter = 0.039976317 Bottom = 0.023151135
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.420106934e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.554686096e-11
   Time per fluid step      0.162903482
   Time per step        0.163756514
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.178209149
Time spent in main      0.78426012

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-21-g3b31af42a8b8) finalized