Initializing AMReX (26.08-21-g3b31af42a8b8)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-21-g3b31af42a8b8) initialized
   MFIX git describe: 26.08-9-g809ffbd271da
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.056110896 Iter = 0.049377228 Bottom = 0.026805789
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08915294843
MLMG: Iteration   2 Fine resid/bnorm = 0.003625781503
MLMG: Iteration   3 Fine resid/bnorm = 0.0001656233945
MLMG: Iteration   4 Fine resid/bnorm = 8.229478156e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.818200517e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.816179091e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.179394374e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.534586743e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.713142146e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.60014172e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.132741254e-12, 1.713142146e-12
MLMG: Timers: Solve = 0.070959253 Iter = 0.069084344 Bottom = 0.048831737
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192412037e-10
  * On level 1 max(abs(diveu)) = 1.469918132e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.677512685e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  2.945869846e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879949e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653249e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448234e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989389192e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.87330286e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880754393e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.39232588e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.95803856e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473589127e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.284873322e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049354108e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.032115499e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488011757e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.622813409e-12, 1.488011757e-12
MLMG: Timers: Solve = 0.050357153 Iter = 0.046544642 Bottom = 0.026303255
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.667083983e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.935587617e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02356566458
MLMG: Iteration   2 Fine resid/bnorm = 0.001359912305
MLMG: Iteration   3 Fine resid/bnorm = 6.137491888e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.058099497e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.555294291e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.906006471e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.954801627e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.922555002e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.041163447e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.580808547e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.444468446e-12, 9.041163447e-13
MLMG: Timers: Solve = 0.064849062 Iter = 0.063960583 Bottom = 0.046631814
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767190061e-11
  * On level 1 max(abs(diveu)) = 2.989967849e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.602003117e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542567364e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.816657135e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960161983e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878589e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432338e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406841329e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.17635193e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012761584e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498513e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070360644e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.35811166e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.152702256e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784872e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640887e-12, 1.835784872e-12
MLMG: Timers: Solve = 0.046470253 Iter = 0.043237953 Bottom = 0.026196907
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.596850464e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.812510219e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02226653034
MLMG: Iteration   2 Fine resid/bnorm = 0.001160999335
MLMG: Iteration   3 Fine resid/bnorm = 5.158073983e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.579647985e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.322253237e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.832917464e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.503227304e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.743951431e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.443295347e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.257399009e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.571160399e-12, 8.443295347e-13
MLMG: Timers: Solve = 0.065759045 Iter = 0.064889399 Bottom = 0.047640838
 >> After projection
  * On level 0 max(abs(diveu)) = 2.776688159e-11
  * On level 1 max(abs(diveu)) = 4.425205759e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.527205259e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617425951e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.724706723e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012760752e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342576e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377126256e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.34397014e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142542e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304872008e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386321664e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027880901e-12, 4.386321664e-12
MLMG: Timers: Solve = 0.040576396 Iter = 0.037271359 Bottom = 0.022291583
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.524382676e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.722175013e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.609954524

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02171558064
MLMG: Iteration   2 Fine resid/bnorm = 0.001146160802
MLMG: Iteration   3 Fine resid/bnorm = 5.090798189e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.554559399e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.314853957e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.825503848e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.499086953e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.738397873e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.374581168e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.417899155e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.538681457e-12, 8.374581168e-13
MLMG: Timers: Solve = 0.067768119 Iter = 0.066903473 Bottom = 0.049546708
 >> After projection
  * On level 0 max(abs(diveu)) = 2.762198564e-11
  * On level 1 max(abs(diveu)) = 4.634899568e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.312526453e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352257489e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.41018415e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323613373e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621053e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310899e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317552992e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377665837e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953933036e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882109107e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957239321e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.907582128e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858562733e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.999335598e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622674374e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117432437e-11, 9.622674374e-12
MLMG: Timers: Solve = 0.04422598 Iter = 0.040930898 Bottom = 0.023852464
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.306634406e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.403946587e-11
   Time per fluid step      0.166186667
   Time per step        0.16702447
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.180949355
Time spent in main      0.790903879

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-21-g3b31af42a8b8) finalized