Initializing AMReX (26.08-26-g2cf4fbcde02a)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-26-g2cf4fbcde02a) initialized
   MFIX git describe: 26.08-11-g382b3987bce8
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055528154 Iter = 0.048884985 Bottom = 0.026445648
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08908510799
MLMG: Iteration   2 Fine resid/bnorm = 0.003608573929
MLMG: Iteration   3 Fine resid/bnorm = 0.0001649631789
MLMG: Iteration   4 Fine resid/bnorm = 8.188693022e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.774534302e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.788791433e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.066720246e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.488925372e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.754320933e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.63518683e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.280153915e-12, 1.754320933e-12
MLMG: Timers: Solve = 0.065797062 Iter = 0.063936249 Bottom = 0.045192834
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192391854e-10
  * On level 1 max(abs(diveu)) = 1.49757874e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.832785628e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.613580319e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879953e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653319e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706449019e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989383829e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.8733409e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.879781559e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325194e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.964274675e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473592245e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.379038652e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049341012e-11
MLMG: Iteration  11 Fine resid/bnorm = 9.478894067e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488148952e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623424031e-12, 1.488148952e-12
MLMG: Timers: Solve = 0.048820868 Iter = 0.045411963 Bottom = 0.025595829
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.82172809e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.602407337e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02374928405
MLMG: Iteration   2 Fine resid/bnorm = 0.001363423395
MLMG: Iteration   3 Fine resid/bnorm = 6.166863194e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.06091646e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.560973748e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.899163024e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.953803007e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.921592697e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.00732198e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.572210992e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.435318695e-12, 9.00732198e-13
MLMG: Timers: Solve = 0.06620287 Iter = 0.065319348 Bottom = 0.047720983
 >> After projection
  * On level 0 max(abs(diveu)) = 3.078090647e-11
  * On level 1 max(abs(diveu)) = 4.374680493e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.781869013e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542576776e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.04789365e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960613755e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878586e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432458e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406838925e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176335902e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.01270148e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498374e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.069659438e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358110963e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.161717761e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835789255e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271643923e-12, 1.835789255e-12
MLMG: Timers: Solve = 0.045763284 Iter = 0.042552403 Bottom = 0.025690916
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.775853469e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.040170251e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02230881623
MLMG: Iteration   2 Fine resid/bnorm = 0.00116518954
MLMG: Iteration   3 Fine resid/bnorm = 5.171350907e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.584207352e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.327875082e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.844568158e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.5116554e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.753428339e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.506814442e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.286223629e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.590503294e-12, 8.506814442e-13
MLMG: Timers: Solve = 0.06526431 Iter = 0.06439064 Bottom = 0.047301953
 >> After projection
  * On level 0 max(abs(diveu)) = 3.038789687e-11
  * On level 1 max(abs(diveu)) = 3.067090202e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.690988418e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.705274839e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.966544286e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012719752e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342636e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576218e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377129258e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344015166e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142237e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.305022097e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386314277e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027877486e-12, 4.386314277e-12
MLMG: Timers: Solve = 0.04022871 Iter = 0.036980332 Bottom = 0.022099135
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.687090917e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.960974656e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.596960261

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02199903616
MLMG: Iteration   2 Fine resid/bnorm = 0.00114759437
MLMG: Iteration   3 Fine resid/bnorm = 5.077725857e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.533168095e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.310465808e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.790587693e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.481984595e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.736563057e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.361078192e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.41435121e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.534588147e-12, 8.361078192e-13
MLMG: Timers: Solve = 0.067043025 Iter = 0.066181965 Bottom = 0.0491287
 >> After projection
  * On level 0 max(abs(diveu)) = 3.036223773e-11
  * On level 1 max(abs(diveu)) = 3.135018855e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.313272804e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.551127565e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.431402952e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323631197e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310855e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553595e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377667135e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953985902e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881431254e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957239208e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.911668709e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858566787e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.997389607e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622598156e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117399824e-11, 9.622598156e-12
MLMG: Timers: Solve = 0.043854277 Iter = 0.040591286 Bottom = 0.023548396
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.307367613e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.42325981e-11
   Time per fluid step      0.164151697
   Time per step        0.165007536
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.179197713
Time spent in main      0.776157974

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-26-g2cf4fbcde02a) finalized