Initializing AMReX (26.08-26-g2cf4fbcde02a)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-26-g2cf4fbcde02a) initialized
   MFIX git describe: 26.08-11-g382b3987bce8
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055472536 Iter = 0.048808604 Bottom = 0.026401894
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.0890889675
MLMG: Iteration   2 Fine resid/bnorm = 0.003589092699
MLMG: Iteration   3 Fine resid/bnorm = 0.0001647618278
MLMG: Iteration   4 Fine resid/bnorm = 8.18760857e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.764435357e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.805474254e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.138019484e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.512812058e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.721632001e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.571376817e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.16313341e-12, 1.721632001e-12
MLMG: Timers: Solve = 0.066921795 Iter = 0.065024879 Bottom = 0.046374499
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192383008e-10
  * On level 1 max(abs(diveu)) = 1.554085405e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.922244776e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.249421557e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.11387995e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653259e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448184e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989383392e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873301613e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880105837e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325101e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.962310299e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473591622e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.304517083e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049347872e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.98624102e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488089709e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623160353e-12, 1.488089709e-12
MLMG: Timers: Solve = 0.047840279 Iter = 0.044537358 Bottom = 0.025399046
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.910303257e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.23379037e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02358067533
MLMG: Iteration   2 Fine resid/bnorm = 0.001361772082
MLMG: Iteration   3 Fine resid/bnorm = 6.166548887e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.073008697e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.564034028e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.932331842e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.967635113e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.926604104e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.069067814e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.620395794e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.452012978e-12, 9.069067814e-13
MLMG: Timers: Solve = 0.065280167 Iter = 0.064403354 Bottom = 0.047160734
 >> After projection
  * On level 0 max(abs(diveu)) = 2.82760211e-11
  * On level 1 max(abs(diveu)) = 4.653312029e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.852745444e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.591600546e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.053808331e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960839642e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878586e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432238e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840828e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.1763349e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012761584e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498562e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.069459093e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111028e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.133669524e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835782368e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271639152e-12, 1.835782368e-12
MLMG: Timers: Solve = 0.046372167 Iter = 0.043110137 Bottom = 0.025996899
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.84614796e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.044796262e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02241805996
MLMG: Iteration   2 Fine resid/bnorm = 0.001163710336
MLMG: Iteration   3 Fine resid/bnorm = 5.18650436e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.580874235e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.331150634e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.889560594e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.527820614e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.759120458e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.527636053e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.361646151e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.596843911e-12, 8.527636053e-13
MLMG: Timers: Solve = 0.06633254 Iter = 0.065458996 Bottom = 0.048217094
 >> After projection
  * On level 0 max(abs(diveu)) = 3.039204103e-11
  * On level 1 max(abs(diveu)) = 3.313300283e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.793295151e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  4.023415258e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.995382892e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012748987e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890301e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377130759e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344045184e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142389e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.303671298e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.38631158e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027876239e-12, 4.38631158e-12
MLMG: Timers: Solve = 0.040784329 Iter = 0.037493699 Bottom = 0.022440896
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.78914222e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.989400929e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.598200091

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02211205852
MLMG: Iteration   2 Fine resid/bnorm = 0.001143405808
MLMG: Iteration   3 Fine resid/bnorm = 5.077335182e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.533559292e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.30953789e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.786322764e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.479889869e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.736131491e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.368138572e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.406454172e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.53672844e-12, 8.368138572e-13
MLMG: Timers: Solve = 0.06605805 Iter = 0.065190067 Bottom = 0.047932688
 >> After projection
  * On level 0 max(abs(diveu)) = 2.759291621e-11
  * On level 1 max(abs(diveu)) = 4.11857642e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.314828067e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.92470257e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.460369016e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323591196e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310909e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553553e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377664832e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953932063e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882015051e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957239102e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.906446967e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858560544e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.96755108e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622639509e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117417518e-11, 9.622639509e-12
MLMG: Timers: Solve = 0.044004859 Iter = 0.040719905 Bottom = 0.023746891
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.308897453e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.451753447e-11
   Time per fluid step      0.163960724
   Time per step        0.164820205
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.17902854
Time spent in main      0.777228631

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-26-g2cf4fbcde02a) finalized