Initializing AMReX (26.08-36-gf2cbba4afc9e)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-36-gf2cbba4afc9e) initialized
   MFIX git describe: 26.08-13-g85a1fd931e25
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055476696 Iter = 0.04875822 Bottom = 0.026332418
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.0892204121
MLMG: Iteration   2 Fine resid/bnorm = 0.003659341642
MLMG: Iteration   3 Fine resid/bnorm = 0.0001643667823
MLMG: Iteration   4 Fine resid/bnorm = 8.1844001e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.806555587e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.81955694e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.12844209e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.542414449e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.707165948e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.516095482e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.111347539e-12, 1.707165948e-12
MLMG: Timers: Solve = 0.070503123 Iter = 0.068612811 Bottom = 0.048563585
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192514881e-10
  * On level 1 max(abs(diveu)) = 1.858392941e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.777772447e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  2.983428316e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879951e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653309e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448258e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.9893799e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873310967e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.879606948e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325569e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.964149953e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473583203e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.428927568e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049348495e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.184003925e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488148952e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623424031e-12, 1.488148952e-12
MLMG: Timers: Solve = 0.047496889 Iter = 0.04423155 Bottom = 0.025151986
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.766975724e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  2.972913211e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02384880727
MLMG: Iteration   2 Fine resid/bnorm = 0.001360890058
MLMG: Iteration   3 Fine resid/bnorm = 6.138164152e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.06169148e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.559729739e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.903973163e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.976823566e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.932327963e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.074757534e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.638681638e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.453551314e-12, 9.074757534e-13
MLMG: Timers: Solve = 0.065426852 Iter = 0.064539014 Bottom = 0.04733256
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767586826e-11
  * On level 1 max(abs(diveu)) = 4.653504294e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.862701809e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542567364e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  3.062389439e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960237278e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878585e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432398e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406838825e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176361947e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012781618e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498562e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071662883e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111407e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.141683306e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.83578362e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.27164002e-12, 1.83578362e-12
MLMG: Timers: Solve = 0.046563084 Iter = 0.043273052 Bottom = 0.026201659
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.856156549e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  3.054253835e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.022436078
MLMG: Iteration   2 Fine resid/bnorm = 0.001164687264
MLMG: Iteration   3 Fine resid/bnorm = 5.190041714e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.591428903e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.332773896e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.903358822e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.530945789e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.765511902e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.556803881e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.373381075e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.605726126e-12, 8.556803881e-13
MLMG: Timers: Solve = 0.066854752 Iter = 0.065956446 Bottom = 0.04869796
 >> After projection
  * On level 0 max(abs(diveu)) = 2.780842175e-11
  * On level 1 max(abs(diveu)) = 4.350300398e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.540924171e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.763632754e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.760344333e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012751517e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377130759e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344045184e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823141674e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304872008e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386314746e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027877703e-12, 4.386314746e-12
MLMG: Timers: Solve = 0.040647139 Iter = 0.037409402 Bottom = 0.022397419
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.538399993e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.760530653e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.605553104

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02206265744
MLMG: Iteration   2 Fine resid/bnorm = 0.001146836315
MLMG: Iteration   3 Fine resid/bnorm = 5.094810999e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.541900975e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.316623341e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.8231251e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.49075341e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.741622701e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.399027733e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.471118324e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.54609222e-12, 8.399027733e-13
MLMG: Timers: Solve = 0.067004625 Iter = 0.06612167 Bottom = 0.048883998
 >> After projection
  * On level 0 max(abs(diveu)) = 2.762230909e-11
  * On level 1 max(abs(diveu)) = 4.634976687e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.314947802e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352255467e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.43423528e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323623079e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310852e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553433e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377666292e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953923955e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882349113e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238446e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.905538838e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.85856176e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.995767948e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622612751e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117406069e-11, 9.622612751e-12
MLMG: Timers: Solve = 0.044056375 Iter = 0.040800678 Bottom = 0.023605418
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.309032714e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.427332919e-11
   Time per fluid step      0.164633104
   Time per step        0.165506031
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.18018915
Time spent in main      0.785742254

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-36-gf2cbba4afc9e) finalized