Initializing AMReX (26.08-36-gf2cbba4afc9e)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.08-36-gf2cbba4afc9e) initialized
   MFIX git describe: 26.08-13-g85a1fd931e25
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055365856 Iter = 0.048685939 Bottom = 0.026269872
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08924249898
MLMG: Iteration   2 Fine resid/bnorm = 0.003623942179
MLMG: Iteration   3 Fine resid/bnorm = 0.000163951447
MLMG: Iteration   4 Fine resid/bnorm = 8.118279817e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.807270345e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.761091493e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.052782833e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.4761876e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.695714028e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.566763578e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.070351721e-12, 1.695714028e-12
MLMG: Timers: Solve = 0.071853197 Iter = 0.06998276 Bottom = 0.049912286
 >> After projection
  * On level 0 max(abs(diveu)) = 1.192403096e-10
  * On level 1 max(abs(diveu)) = 1.470122935e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  2.841622011e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  3.016174317e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879954e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653379e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448383e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.98938464e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873310343e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.879794032e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325319e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.969762456e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473595363e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.440776185e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049348495e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.932337667e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488130244e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623340765e-12, 1.488130244e-12
MLMG: Timers: Solve = 0.047988798 Iter = 0.044658721 Bottom = 0.02551118
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  2.830573408e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  3.005686616e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02360057102
MLMG: Iteration   2 Fine resid/bnorm = 0.001359380482
MLMG: Iteration   3 Fine resid/bnorm = 6.146965102e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.064065909e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.556248433e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.897381092e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.957189925e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.922890448e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.02107626e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.573943335e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.439037454e-12, 9.02107626e-13
MLMG: Timers: Solve = 0.065211405 Iter = 0.064337775 Bottom = 0.04706123
 >> After projection
  * On level 0 max(abs(diveu)) = 2.767099568e-11
  * On level 1 max(abs(diveu)) = 4.653836631e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  2.532056389e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542557952e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  2.735574083e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960839642e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878587e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432368e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406839626e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176350928e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012661412e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498325e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071262194e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111096e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.135672969e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835781116e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271638285e-12, 1.835781116e-12
MLMG: Timers: Solve = 0.046478592 Iter = 0.043191738 Bottom = 0.026134097
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  2.52782791e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.731125381e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02234462101
MLMG: Iteration   2 Fine resid/bnorm = 0.001164009302
MLMG: Iteration   3 Fine resid/bnorm = 5.190267162e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.593230946e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.329115555e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.871449614e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.518766727e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.751995425e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.479755132e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.29773069e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.582263167e-12, 8.479755132e-13
MLMG: Timers: Solve = 0.067317893 Iter = 0.066432617 Bottom = 0.049117246
 >> After projection
  * On level 0 max(abs(diveu)) = 2.761420177e-11
  * On level 1 max(abs(diveu)) = 4.632235012e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  2.506597253e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617498599e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.753836073e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012733458e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342564e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377124755e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.343940122e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.8231426e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.30457183e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386314394e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.02787754e-12, 4.386314394e-12
MLMG: Timers: Solve = 0.040886148 Iter = 0.037639006 Bottom = 0.022554867
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  2.504329814e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.75189169e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.608843493

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02191808869
MLMG: Iteration   2 Fine resid/bnorm = 0.001143924494
MLMG: Iteration   3 Fine resid/bnorm = 5.073845986e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.534469589e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.308068985e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.801219124e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.479242962e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.739514295e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.382877114e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.463221286e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.541196301e-12, 8.382877114e-13
MLMG: Timers: Solve = 0.067894871 Iter = 0.067009413 Bottom = 0.049759464
 >> After projection
  * On level 0 max(abs(diveu)) = 2.762149421e-11
  * On level 1 max(abs(diveu)) = 4.142312149e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.426785545e-11
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.35236341e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.567225905e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323600314e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621054e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310917e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553468e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377668432e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953942766e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882323166e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.95723907e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.91147411e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.85856022e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.005173571e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622662212e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117427232e-11, 9.622662212e-12
MLMG: Timers: Solve = 0.043839307 Iter = 0.040577101 Bottom = 0.023572856
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.418904665e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.5561974e-11
   Time per fluid step      0.165491652
   Time per step        0.166355697
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.180473735
Time spent in main      0.789317228

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.08-36-gf2cbba4afc9e) finalized