Initializing AMReX (26.09-7-g55dda725ff4d)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.09-7-g55dda725ff4d) initialized
   MFIX git describe: 26.09
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055581118 Iter = 0.048851205 Bottom = 0.026184319
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08940527303
MLMG: Iteration   2 Fine resid/bnorm = 0.003660548778
MLMG: Iteration   3 Fine resid/bnorm = 0.000168720108
MLMG: Iteration   4 Fine resid/bnorm = 8.475352117e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.906602649e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.864735589e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.627688316e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.714870609e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.71895103e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.517878751e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.153536014e-12, 1.71895103e-12
MLMG: Timers: Solve = 0.063530876 Iter = 0.061645292 Bottom = 0.04424374
 >> After projection
  * On level 0 max(abs(diveu)) = 1.164758389e-10
  * On level 1 max(abs(diveu)) = 1.385123801e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  5.810610469e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  6.924461203e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879949e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653279e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448751e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989383829e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873340277e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880236796e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325444e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.959410506e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473590375e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.288614991e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049340389e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.383559589e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488099063e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623201987e-12, 1.488099063e-12
MLMG: Timers: Solve = 0.053126156 Iter = 0.049371819 Bottom = 0.027179555
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  5.787889214e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  6.908094458e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02364426754
MLMG: Iteration   2 Fine resid/bnorm = 0.001370865945
MLMG: Iteration   3 Fine resid/bnorm = 6.179543271e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.038414614e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.547306162e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.838976885e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.918910822e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.903184721e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.943201306e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.631752265e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.417982324e-12, 8.943201306e-13
MLMG: Timers: Solve = 0.061273942 Iter = 0.060333905 Bottom = 0.04478421
 >> After projection
  * On level 0 max(abs(diveu)) = 2.776871556e-11
  * On level 1 max(abs(diveu)) = 3.052594481e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  3.53132205e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  4.931065926e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  6.312628611e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  6.952315435e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878586e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432288e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840227e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176352931e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012851739e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498395e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070160299e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111175e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.147693642e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835790037e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271644465e-12, 1.835790037e-12
MLMG: Timers: Solve = 0.046922891 Iter = 0.043649407 Bottom = 0.026291047
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  3.509996087e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  6.30612466e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02217591611
MLMG: Iteration   2 Fine resid/bnorm = 0.001152455792
MLMG: Iteration   3 Fine resid/bnorm = 5.158249061e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.559968181e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.311545408e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.751544866e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.468710255e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.726354094e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.339714418e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.343815902e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.539617835e-12, 8.339714418e-13
MLMG: Timers: Solve = 0.061364958 Iter = 0.060495551 Bottom = 0.045545681
 >> After projection
  * On level 0 max(abs(diveu)) = 2.585166551e-11
  * On level 1 max(abs(diveu)) = 2.792774336e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.059243759e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.857632772e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  7.877629592e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.01270481e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377129258e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344000158e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142284e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304421742e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386319202e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027879763e-12, 4.386319202e-12
MLMG: Timers: Solve = 0.040508687 Iter = 0.037223629 Bottom = 0.022095885
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.044037893e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  7.865678462e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.585496895

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02180787948
MLMG: Iteration   2 Fine resid/bnorm = 0.001146851615
MLMG: Iteration   3 Fine resid/bnorm = 5.059665454e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.522294146e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.288911993e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.669559925e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.413591315e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.698768844e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.180420725e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.375037695e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.479823407e-12, 8.180420725e-13
MLMG: Timers: Solve = 0.061279114 Iter = 0.060384035 Bottom = 0.04543207
 >> After projection
  * On level 0 max(abs(diveu)) = 2.776885472e-11
  * On level 1 max(abs(diveu)) = 3.047061917e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  2.900305043e-11
   max(abs(gpx/gpy/gpz))  = 14.22686544  14.22686544  5.797678765e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  3.857904944e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.419542381e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310858e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.31755354e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377663016e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953965145e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881865858e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238129e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.90790646e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.85856249e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.000957257e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622594102e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117398089e-11, 9.622594102e-12
MLMG: Timers: Solve = 0.043934129 Iter = 0.040651983 Bottom = 0.02344805
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  2.88664061e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  3.844212265e-11
   Time per fluid step      0.155037064
   Time per step        0.155914641
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.17014028
Time spent in main      0.755637175

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.09-7-g55dda725ff4d) finalized