Initializing AMReX (26.09-11-gae079342654b)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.09-11-gae079342654b) initialized
   MFIX git describe: 26.09
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.05506531 Iter = 0.048383736 Bottom = 0.026015971
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08985216822
MLMG: Iteration   2 Fine resid/bnorm = 0.003653618197
MLMG: Iteration   3 Fine resid/bnorm = 0.000168391944
MLMG: Iteration   4 Fine resid/bnorm = 8.465867493e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.904990215e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.887478943e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.611771183e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.766143056e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.744133888e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.494347355e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.243686124e-12, 1.744133888e-12
MLMG: Timers: Solve = 0.064411492 Iter = 0.062547227 Bottom = 0.045337835
 >> After projection
  * On level 0 max(abs(diveu)) = 1.164763008e-10
  * On level 1 max(abs(diveu)) = 1.329727646e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  5.80902668e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  8.23432298e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879951e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653249e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448452e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989384577e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873350254e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.88026174e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325725e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.956884879e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473598481e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.399306024e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049343507e-11
MLMG: Iteration  11 Fine resid/bnorm = 8.655726951e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488148952e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623424031e-12, 1.488148952e-12
MLMG: Timers: Solve = 0.047378325 Iter = 0.044120767 Bottom = 0.02492389
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  5.786481526e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  8.221549501e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02363865794
MLMG: Iteration   2 Fine resid/bnorm = 0.001370456228
MLMG: Iteration   3 Fine resid/bnorm = 6.16878705e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.052689363e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.542327493e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.845238769e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.920718174e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.911542178e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.97209519e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.631559783e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.425794392e-12, 8.97209519e-13
MLMG: Timers: Solve = 0.058025737 Iter = 0.057168985 Bottom = 0.042317843
 >> After projection
  * On level 0 max(abs(diveu)) = 2.774265477e-11
  * On level 1 max(abs(diveu)) = 3.048917784e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  4.190812787e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  4.892847614e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  6.551949917e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  1.079715337e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878586e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432458e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840528e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176354935e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012941894e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498405e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071262194e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358112089e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.138678137e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835786125e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271641755e-12, 1.835786125e-12
MLMG: Timers: Solve = 0.046217897 Iter = 0.042978927 Bottom = 0.025912216
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  4.166233097e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  6.52898906e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02197645321
MLMG: Iteration   2 Fine resid/bnorm = 0.001159078766
MLMG: Iteration   3 Fine resid/bnorm = 5.136923655e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.562551093e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.315476871e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.767585124e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.469921423e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.732620784e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.352014104e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.306104641e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.543363347e-12, 8.352014104e-13
MLMG: Timers: Solve = 0.058756383 Iter = 0.05791392 Bottom = 0.043052193
 >> After projection
  * On level 0 max(abs(diveu)) = 2.567403762e-11
  * On level 1 max(abs(diveu)) = 3.04790104e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.035573929e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  4.342342702e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  6.341196851e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012748105e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.1073426e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.53057618e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377129258e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344015166e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142776e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304421742e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386311815e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027876348e-12, 4.386311815e-12
MLMG: Timers: Solve = 0.040753 Iter = 0.037506578 Bottom = 0.022440092
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.019592158e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  6.32657531e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.569020977

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02158113141
MLMG: Iteration   2 Fine resid/bnorm = 0.00114687086
MLMG: Iteration   3 Fine resid/bnorm = 5.078848025e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.51069776e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.291676843e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.694491829e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.419049253e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.710331981e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.211309887e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.428485764e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.489187187e-12, 8.211309887e-13
MLMG: Timers: Solve = 0.059979606 Iter = 0.05909396 Bottom = 0.044197146
 >> After projection
  * On level 0 max(abs(diveu)) = 3.053867581e-11
  * On level 1 max(abs(diveu)) = 3.046756483e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  3.274875386e-11
   max(abs(gpx/gpy/gpz))  = 14.22686544  14.22686544  6.112522336e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  4.602156115e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323584549e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621053e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.62231091e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553757e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377666356e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953959307e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.882154514e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.95723924e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.909268653e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858569706e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.016200852e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622614373e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117406763e-11, 9.622614373e-12
MLMG: Timers: Solve = 0.043653089 Iter = 0.040355006 Bottom = 0.023281384
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  3.262823433e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  4.595676789e-11
   Time per fluid step      0.152974726
   Time per step        0.153819151
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.168047731
Time spent in main      0.737068708

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.09-11-gae079342654b) finalized