Initializing AMReX (26.09-11-gae079342654b)... MPI initialized with 1 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.09-11-gae079342654b) initialized MFIX git describe: 26.09 AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5 Number of levels: 1 RunType is Standard Auto-generating level-set parameters: eb_refinement = 1 levelset_pad = 8 eb_pad = 8 ================================================================================ Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest ================================================================================ ================================================================================ Warning: Overwriting amr.plot_int with value from mfix.plot_int ================================================================================ ================================================================================ Warning: Overwriting amr.plot_file with value from mfix.plot_file ================================================================================ ================================================================================ Warning: Overwriting amr.check_file with value from mfix.check_file ================================================================================ Simulation is transient ================================================================================ Warning: mfix.stop_time and mfix.max_step are both defined. The simulation will end when either condition is met. ================================================================================ -------------------------------------------------------------------------------- Info: Max effective viscosity factor not specified. Using default 1e+06 -------------------------------------------------------------------------------- Scalar diffusion coefficients Tracer0: 0 Particle-particle conduction is disabled. Particle-fluid-particle conduction is disabled. Specified constant pressure drop: (1000,0,0) Load balance setup: Type: SingleGrid Strategy: KnapSack Weighting: ParticleRunTime ================================================================================ Warning: Regridding disabled for single level, single rank run. ================================================================================ Drag model: BVK2 Convection model not specified. Setting default: mfix.convection.model = RanzMarshall Building cylinder geometry. Internal Flow: 1 Radius: 0.49 Height: -1 Direction: 0 Rotation angle: 0 Rotation axis: 0 Center: 0.5, 1.5, 1.5 Done making the fluid eb levels ... PostProcessBaseGrids Making new level 0 from scratch On level 0 updated BC areas: Auto generating particles ... Total number of generated particles: 2,578 Time spent in initializing particles 0.020813251 **************************************** Coverage report: Grids Cells regular: 0 45 covered: 0 1000 cut: 1 80 **************************************** Clean up auto-generated particles. IC Region Generated Removed Remaining **************** **************** **************** **************** fluid-only 0 0 0 bed 2,578 2,409 169 ---------------- ---------------- ---------------- ---------------- Total 2,578 2,409 169 **************** **************** **************** **************** On level 0: set volume fraction bcs Setting original sum_vol to 0.644240679 On level 0 fillpatch epf On level 0 fillpatch rho On level 0 fillpatch vel On level 0 fillpatch tracer On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Initial projection: Before projection: max(abs(u/v/w)) = 0 1.301306859 1.301322376 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 0.4567430634 0.4800854565 0.4809140291 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Doing initial pressure iterations with dt = 0.01257412738 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs In initial_iterations: iter = 0 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.017139295 MLMG: Initial rhs = 4.835568549 MLMG: Initial residual (resid0) = 4.835568549 MLMG: Final Iter. 12 resid, resid/bnorm = 1.968647467e-12, 4.071180973e-13 MLMG: Timers: Solve = 0.010203684 Iter = 0.009570147 Bottom = 0.008303975 >> After projection * On level 0 max(abs(diveu)) = 3.195473292e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.31803728 0.3782242819 0.3701011494 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.77366769 0.6130601598 0.5640480572 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 1 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.54848224 MLMG: Initial rhs = 8.54848224 MLMG: Initial residual (resid0) = 8.54848224 MLMG: Final Iter. 12 resid, resid/bnorm = 1.767475055e-12, 2.067589316e-13 MLMG: Timers: Solve = 0.0096665 Iter = 0.009440311 Bottom = 0.008176108 >> After projection * On level 0 max(abs(diveu)) = 2.870086929e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.19070003 0.5006952984 0.5271923516 max(abs(gpx/gpy/gpz)) = 296.7586491 40.24385584 26.89819883 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.82880295 0.7186635594 0.6140523602 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 2 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 11.94401664 MLMG: Initial rhs = 11.94401664 MLMG: Initial residual (resid0) = 11.94401664 MLMG: Final Iter. 11 resid, resid/bnorm = 9.341416529e-12, 7.821000934e-13 MLMG: Timers: Solve = 0.008873189 Iter = 0.008622854 Bottom = 0.007463555 >> After projection * On level 0 max(abs(diveu)) = 1.51787024e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.76177963 0.6109589654 0.6281685018 max(abs(gpx/gpy/gpz)) = 413.7410474 67.38405151 45.5360011 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.81592189 0.7501856745 0.6401378177 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs Enclosed domain volume is 0.644240679 Time spent in init 0.185142433 Writing plotfile TracerAdv-Godunov_plt00000 at time 0 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 1: from old_time 0 to new time 0.01039491141 with dt = 0.01039491141 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 10.24143815 MLMG: Initial rhs = 10.24143815 MLMG: Initial residual (resid0) = 10.24143815 MLMG: Final Iter. 11 resid, resid/bnorm = 9.256151401e-12, 9.037941027e-13 MLMG: Timers: Solve = 0.008870753 Iter = 0.008619471 Bottom = 0.007458057 >> After projection * On level 0 max(abs(diveu)) = 1.503685253e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 10.44674425 0.496887431 0.4905679734 max(abs(gpx/gpy/gpz)) = 468.6919134 85.74994576 55.19384553 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 10.78589498 0.5235782765 0.4936971967 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.01039491141 done. Time per fluid step 0.0344042 Time per 2 particle steps 0.000416332 Coupling time per step 0.003068023 Sum tracer volume wgt = 158.0311243 141.654417 Time per step 0.03914668 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 2: from old_time 0.01039491141 to new time 0.01914403905 with dt = 0.008749127647 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 16.66477033 MLMG: Initial rhs = 16.66477033 MLMG: Initial residual (resid0) = 16.66477033 MLMG: Final Iter. 11 resid, resid/bnorm = 4.911626661e-12, 2.947311342e-13 MLMG: Timers: Solve = 0.008857565 Iter = 0.008630386 Bottom = 0.00747369 >> After projection * On level 0 max(abs(diveu)) = 7.977108652e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 16.88047639 0.5722175053 0.3987063928 max(abs(gpx/gpy/gpz)) = 429.4527595 72.07875146 44.59151418 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 18.36797398 0.8622813617 0.7054534298 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.008749127647 done. Time per fluid step 0.034938302 Time per 1 particle steps 0.000215213 Coupling time per step 0.002313795 Sum tracer volume wgt = 159.4641269 141.9070251 Time per step 0.038829181 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 3: from old_time 0.01914403905 to new time 0.02604600406 with dt = 0.006901965007 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 27.33031619 MLMG: Initial rhs = 27.33031619 MLMG: Initial residual (resid0) = 27.33031619 MLMG: Final Iter. 11 resid, resid/bnorm = 2.100586372e-11, 7.685920489e-13 MLMG: Timers: Solve = 0.008942346 Iter = 0.008679119 Bottom = 0.007502766 >> After projection * On level 0 max(abs(diveu)) = 3.466047899e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 21.39464285 0.8762325312 0.6158084726 max(abs(gpx/gpy/gpz)) = 663.4282254 116.6522066 72.91501667 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 22.70323522 1.221999812 0.9005142737 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006901965007 done. Time per fluid step 0.035168542 Time per 1 particle steps 0.000159493 Coupling time per step 0.002243856 Sum tracer volume wgt = 161.0378026 141.7001481 Time per step 0.03868952 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 4: from old_time 0.02604600406 to new time 0.03213060759 with dt = 0.006084603534 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 35.45416837 MLMG: Initial rhs = 35.45416837 MLMG: Initial residual (resid0) = 35.45416837 MLMG: Final Iter. 11 resid, resid/bnorm = 3.08591866e-11, 8.703965716e-13 MLMG: Timers: Solve = 0.00797591 Iter = 0.007750396 Bottom = 0.00667907 >> After projection * On level 0 max(abs(diveu)) = 4.721338615e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 24.82174366 1.237686022 0.8541830113 max(abs(gpx/gpy/gpz)) = 1030.197519 162.4081881 130.4225403 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 25.35610376 1.432927412 1.059828457 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006084603534 done. Time per fluid step 0.031627797 Time per 1 particle steps 0.000207867 Coupling time per step 0.002291125 Sum tracer volume wgt = 162.4546429 141.6242051 Time per step 0.035294223 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 5: from old_time 0.03213060759 to new time 0.03775887021 with dt = 0.005628262616 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 39.88035355 MLMG: Initial rhs = 39.88035355 MLMG: Initial residual (resid0) = 39.88035355 MLMG: Final Iter. 12 resid, resid/bnorm = 5.842753524e-12, 1.465070644e-13 MLMG: Timers: Solve = 0.008428519 Iter = 0.008215128 Bottom = 0.007074657 >> After projection * On level 0 max(abs(diveu)) = 8.53109067e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 27.08671198 1.533413416 1.013785061 max(abs(gpx/gpy/gpz)) = 1265.979776 199.3083854 175.086071 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 26.89998422 1.456106195 1.110939603 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005628262616 done. Time per fluid step 0.032049623 Time per 1 particle steps 0.00018603 Coupling time per step 0.002037643 Sum tracer volume wgt = 163.3920792 141.7249449 Time per step 0.035306029 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 6: from old_time 0.03775887021 to new time 0.04312970905 with dt = 0.005370838839 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 43.92464709 MLMG: Initial rhs = 43.92464709 MLMG: Initial residual (resid0) = 43.92464709 MLMG: Final Iter. 11 resid, resid/bnorm = 3.875193108e-11, 8.82236595e-13 MLMG: Timers: Solve = 0.007950187 Iter = 0.007708095 Bottom = 0.006609765 >> After projection * On level 0 max(abs(diveu)) = 5.456534048e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 29.02175775 1.693452704 1.102007864 max(abs(gpx/gpy/gpz)) = 1412.043693 220.2793642 194.3788952 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 27.88710515 1.416359027 1.218467975 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005370838839 done. Time per fluid step 0.031251974 Time per 1 particle steps 0.000192283 Coupling time per step 0.002155229 Sum tracer volume wgt = 163.1170072 141.6119561 Time per step 0.034831643 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 7: from old_time 0.04312970905 to new time 0.04837500531 with dt = 0.005245296259 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 44.00433756 MLMG: Initial rhs = 44.00433756 MLMG: Initial residual (resid0) = 44.00433756 MLMG: Final Iter. 11 resid, resid/bnorm = 4.326925254e-11, 9.832951689e-13 MLMG: Timers: Solve = 0.007839681 Iter = 0.007575197 Bottom = 0.006485624 >> After projection * On level 0 max(abs(diveu)) = 5.868273121e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.34888703 1.661183793 1.086244196 max(abs(gpx/gpy/gpz)) = 1476.682667 220.7930658 195.7683862 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 28.64204211 1.401574266 1.192359858 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005245296259 done. Time per fluid step 0.031132275 Time per 1 particle steps 0.00017649 Coupling time per step 0.001958894 Sum tracer volume wgt = 162.2140877 141.6187681 Time per step 0.034461223 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 8: from old_time 0.04837500531 to new time 0.05350889621 with dt = 0.005133890898 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.31992299 MLMG: Initial rhs = 41.31992299 MLMG: Initial residual (resid0) = 41.31992299 MLMG: Final Iter. 11 resid, resid/bnorm = 3.958182232e-11, 9.5793553e-13 MLMG: Timers: Solve = 0.007723134 Iter = 0.007515199 Bottom = 0.006470616 >> After projection * On level 0 max(abs(diveu)) = 5.379203155e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.98038152 1.546906162 1.022153789 max(abs(gpx/gpy/gpz)) = 1467.993579 217.0449226 184.332666 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.27103575 1.304270398 1.159540368 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005133890898 done. Time per fluid step 0.030904474 Time per 1 particle steps 0.000152308 Coupling time per step 0.002209093 Sum tracer volume wgt = 161.1579219 141.6242871 Time per step 0.034364588 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 9: from old_time 0.05350889621 to new time 0.05855160977 with dt = 0.005042713564 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 39.56790821 MLMG: Initial rhs = 39.56790821 MLMG: Initial residual (resid0) = 39.56790821 MLMG: Final Iter. 11 resid, resid/bnorm = 3.171541093e-11, 8.015437855e-13 MLMG: Timers: Solve = 0.007803755 Iter = 0.007563799 Bottom = 0.006488456 >> After projection * On level 0 max(abs(diveu)) = 4.460426738e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.34910534 1.409716359 0.9388298107 max(abs(gpx/gpy/gpz)) = 1449.281273 222.5564267 182.2333265 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.88003836 1.18392817 1.164285632 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005042713564 done. Time per fluid step 0.031061127 Time per 1 particle steps 0.000182599 Coupling time per step 0.002120917 Sum tracer volume wgt = 160.15363 141.5587713 Time per step 0.034509867 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 10: from old_time 0.05855160977 to new time 0.06351828079 with dt = 0.004966671017 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 37.6476735 MLMG: Initial rhs = 37.6476735 MLMG: Initial residual (resid0) = 37.6476735 MLMG: Final Iter. 12 resid, resid/bnorm = 5.277789102e-12, 1.401889841e-13 MLMG: Timers: Solve = 0.008470957 Iter = 0.008220436 Bottom = 0.007072623 >> After projection * On level 0 max(abs(diveu)) = 7.315133549e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.63713239 1.326877277 0.893892255 max(abs(gpx/gpy/gpz)) = 1444.614593 222.0192438 179.8942845 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 30.4224682 1.10156774 1.187822488 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.004966671017 done. Time per fluid step 0.031768449 Time per 1 particle steps 0.000177293 Coupling time per step 0.002167668 Sum tracer volume wgt = 159.693834 141.6172213 Time per step 0.035283269 Writing plotfile TracerAdv-Godunov_plt00010 at time 0.06351828079 Time spent in main (after init) 0.367088198 Time spent in main 0.552230631 Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [6621 ... 6621] [The Arena] max space (MB) allocated spread across MPI: [97 ... 97] [The Arena] max space (MB) used spread across MPI: [82 ... 82] [The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Managed Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [0 ... 0] AMReX (26.09-11-gae079342654b) finalized