Initializing AMReX (26.09-39-g319f3242073e)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.09-39-g319f3242073e) initialized
   MFIX git describe: 26.09
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.054940362 Iter = 0.048243317 Bottom = 0.025895272
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08939930629
MLMG: Iteration   2 Fine resid/bnorm = 0.003638138842
MLMG: Iteration   3 Fine resid/bnorm = 0.000167874715
MLMG: Iteration   4 Fine resid/bnorm = 8.427478695e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.919100429e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.884432144e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.590234304e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.696354354e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.717090227e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.609445731e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.146874676e-12, 1.717090227e-12
MLMG: Timers: Solve = 0.064041324 Iter = 0.062177615 Bottom = 0.045031888
 >> After projection
  * On level 0 max(abs(diveu)) = 1.16474024e-10
  * On level 1 max(abs(diveu)) = 1.357400837e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  5.777519967e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  7.967314551e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879953e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653239e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448595e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989384452e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.87330286e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.880592254e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325693e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.966956204e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473586633e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.317924729e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.04934413e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.782670918e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488198841e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623646076e-12, 1.488198841e-12
MLMG: Timers: Solve = 0.05192838 Iter = 0.048191012 Bottom = 0.026757168
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  5.754984708e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  7.956423202e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02364051814
MLMG: Iteration   2 Fine resid/bnorm = 0.00137354915
MLMG: Iteration   3 Fine resid/bnorm = 6.224922465e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.067978936e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.551151309e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.863775749e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.932975563e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.906712842e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.028646062e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.639900694e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.441084109e-12, 9.028646062e-13
MLMG: Timers: Solve = 0.058701952 Iter = 0.057852838 Bottom = 0.043096283
 >> After projection
  * On level 0 max(abs(diveu)) = 2.777673331e-11
  * On level 1 max(abs(diveu)) = 3.131122148e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  6.961758266e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  4.890700138e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  9.859477708e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  1.080985964e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878587e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432218e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406839126e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.176372966e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.01299198e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498518e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.071662883e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111968e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.142685029e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784872e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640887e-12, 1.835784872e-12
MLMG: Timers: Solve = 0.04603288 Iter = 0.042767301 Bottom = 0.025819733
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  6.944675222e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  9.842554608e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02237009129
MLMG: Iteration   2 Fine resid/bnorm = 0.001168524984
MLMG: Iteration   3 Fine resid/bnorm = 5.182123251e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.572862911e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.311060168e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.778364253e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.468649108e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.726788975e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.334706689e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.314649489e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.538092876e-12, 8.334706689e-13
MLMG: Timers: Solve = 0.060091604 Iter = 0.059250068 Bottom = 0.044450492
 >> After projection
  * On level 0 max(abs(diveu)) = 2.501212599e-11
  * On level 1 max(abs(diveu)) = 2.778262356e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.738589501e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  7.308302489e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  7.661538463e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.896961447e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.1073426e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890293e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576218e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377127757e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344015166e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142049e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.303971475e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386312635e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027876727e-12, 4.386312635e-12
MLMG: Timers: Solve = 0.040042277 Iter = 0.036800328 Bottom = 0.021895221
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.727274548e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  7.651689536e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.574068415

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02190082116
MLMG: Iteration   2 Fine resid/bnorm = 0.00115120371
MLMG: Iteration   3 Fine resid/bnorm = 5.070569055e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.515846693e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.286685368e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.657769232e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.40956478e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.697245567e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.209897811e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.359644193e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.488759129e-12, 8.209897811e-13
MLMG: Timers: Solve = 0.059071784 Iter = 0.05821632 Bottom = 0.043477846
 >> After projection
  * On level 0 max(abs(diveu)) = 2.774637592e-11
  * On level 1 max(abs(diveu)) = 3.046516753e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  2.564494305e-11
   max(abs(gpx/gpy/gpz))  = 14.22686544  14.22686544  7.580430115e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  3.177906499e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.710683767e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310902e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553066e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377667816e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.95390709e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881742612e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957239151e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.910274082e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.85856622e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.030795784e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622644374e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.1174196e-11, 9.622644374e-12
MLMG: Timers: Solve = 0.043373977 Iter = 0.040134654 Bottom = 0.023203438
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  2.550815534e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  3.163547315e-11
   Time per fluid step      0.151573559
   Time per step        0.152412577
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.167277372
Time spent in main      0.741345787

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.09-39-g319f3242073e) finalized