Initializing AMReX (26.09-42-gab27bcd92650)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.09-42-gab27bcd92650) initialized
   MFIX git describe: 26.09-2-g62c3a1745306
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525502e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875905e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336670193e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.216690702e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.860377548e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781843235e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.794694908e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540376411e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.620452233e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641251373e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.17541011e-10, 3.641251373e-12
MLMG: Timers: Solve = 0.055381553 Iter = 0.04858874 Bottom = 0.026146341
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165594936e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167571678e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.0894052186
MLMG: Iteration   2 Fine resid/bnorm = 0.003630636959
MLMG: Iteration   3 Fine resid/bnorm = 0.0001672973234
MLMG: Iteration   4 Fine resid/bnorm = 8.44724563e-06
MLMG: Iteration   5 Fine resid/bnorm = 3.931344609e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.88617339e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.523181937e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.691037732e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.725587891e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.568895748e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 6.177294787e-12, 1.725587891e-12
MLMG: Timers: Solve = 0.064074134 Iter = 0.062141434 Bottom = 0.04494409
 >> After projection
  * On level 0 max(abs(diveu)) = 1.164769844e-10
  * On level 1 max(abs(diveu)) = 1.357463472e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  6.244598204e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  8.189570732e-11
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879951e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653219e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706447809e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.989385325e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873317203e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.87992499e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392325569e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.961468423e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473585386e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.372178926e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049349119e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.408504047e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488148952e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623424031e-12, 1.488148952e-12
MLMG: Timers: Solve = 0.052733041 Iter = 0.049027965 Bottom = 0.027155597
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  6.220085678e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  8.176897919e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02373461212
MLMG: Iteration   2 Fine resid/bnorm = 0.001369590042
MLMG: Iteration   3 Fine resid/bnorm = 6.17483749e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.056842843e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.546590785e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.848301654e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.928487314e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.914822425e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.996734153e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.712338299e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.432456054e-12, 8.996734153e-13
MLMG: Timers: Solve = 0.057959485 Iter = 0.0570983 Bottom = 0.042219462
 >> After projection
  * On level 0 max(abs(diveu)) = 2.777725268e-11
  * On level 1 max(abs(diveu)) = 3.13504338e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  5.292724206e-11
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  5.319815334e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  6.550969651e-11
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  1.068067658e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878588e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432308e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406839426e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.17635794e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012611325e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.039498395e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070560988e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111672e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.148695365e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835784403e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271640562e-12, 1.835784403e-12
MLMG: Timers: Solve = 0.046024019 Iter = 0.042799551 Bottom = 0.025790186
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  5.284025729e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  6.539935603e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02218579174
MLMG: Iteration   2 Fine resid/bnorm = 0.001172028924
MLMG: Iteration   3 Fine resid/bnorm = 5.161630754e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.555040688e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.308236548e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.727575712e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.440572438e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.714730012e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.283926555e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.226238798e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.522629261e-12, 8.283926555e-13
MLMG: Timers: Solve = 0.060445874 Iter = 0.05957403 Bottom = 0.044743649
 >> After projection
  * On level 0 max(abs(diveu)) = 2.736555232e-11
  * On level 1 max(abs(diveu)) = 2.983567077e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.075808055e-11
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  7.20759691e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  6.38989532e-11
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.092060827e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.316339719e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342624e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576142e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377124755e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.344015166e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823142307e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304271653e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386310525e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027875751e-12, 4.386310525e-12
MLMG: Timers: Solve = 0.040357165 Iter = 0.037114532 Bottom = 0.02215444
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.071074237e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  6.383549153e-11
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.576981594

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02175708672
MLMG: Iteration   2 Fine resid/bnorm = 0.00115369648
MLMG: Iteration   3 Fine resid/bnorm = 5.109003168e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.526432296e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.290114471e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.668360835e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.408484454e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.692599837e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.135940333e-13
MLMG: Iteration   9 Crse resid/bnorm = 8.284622332e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.466339563e-12, 8.135940333e-13
MLMG: Timers: Solve = 0.059778605 Iter = 0.05891636 Bottom = 0.044007109
 >> After projection
  * On level 0 max(abs(diveu)) = 2.777123002e-11
  * On level 1 max(abs(diveu)) = 2.886880107e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  2.553006756e-11
   max(abs(gpx/gpy/gpz))  = 14.22686544  14.22686544  8.2349507e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  3.180465743e-11
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323582196e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621052e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310879e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553264e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377662627e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.953981686e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881762072e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957238981e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.908490257e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858567112e-11
MLMG: Iteration  10 Fine resid/bnorm = 4.007443894e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622575453e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117390109e-11, 9.622575453e-12
MLMG: Timers: Solve = 0.043703896 Iter = 0.040430172 Bottom = 0.023321423
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  2.538729715e-11
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  3.165635991e-11
   Time per fluid step      0.152904383
   Time per step        0.153750964
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.168098097
Time spent in main      0.745079691

Total GPU global memory (MB) spread across MPI: [7965 ... 7965]
Free  GPU global memory (MB) spread across MPI: [6579 ... 6579]
[The         Arena] max space (MB) allocated spread across MPI: [137 ... 137]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.09-42-gab27bcd92650) finalized