Initializing AMReX (26.09-122-ga846c6a9c672)... MPI initialized with 1 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.09-122-ga846c6a9c672) initialized MFIX git describe: 26.09-7-gc9e40090b1e1 AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5 Number of levels: 1 RunType is Standard Auto-generating level-set parameters: eb_refinement = 1 levelset_pad = 8 eb_pad = 8 ================================================================================ Warning: Overwriting amr.check_file with value from mfix.check_file ================================================================================ ================================================================================ Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest ================================================================================ ================================================================================ Warning: Overwriting amr.plot_int with value from output.plot.int ================================================================================ ================================================================================ Warning: Overwriting amr.plot_file with value from output.plot.file ================================================================================ Simulation is transient ================================================================================ Warning: mfix.stop_time and mfix.max_step are both defined. The simulation will end when either condition is met. ================================================================================ -------------------------------------------------------------------------------- Info: Max effective viscosity factor not specified. Using default 1e+06 -------------------------------------------------------------------------------- Scalar diffusion coefficients Tracer0: 0 Particle-particle conduction is disabled. Particle-fluid-particle conduction is disabled. Specified constant pressure drop: (1000,0,0) Load balance setup: Type: SingleGrid Strategy: KnapSack Weighting: ParticleRunTime ================================================================================ Warning: Regridding disabled for single level, single rank run. ================================================================================ Drag model: BVK2 Convection model not specified. Setting default: mfix.convection.model = RanzMarshall Building cylinder geometry. Internal Flow: 1 Radius: 0.49 Height: -1 Direction: 0 Rotation angle: 0 Rotation axis: 0 Center: 0.5, 1.5, 1.5 Done making the fluid eb levels ... PostProcessBaseGrids Making new level 0 from scratch On level 0 updated BC areas: Auto generating particles ... Total number of generated particles: 2,578 Time spent in initializing particles 0.020298799 **************************************** Coverage report: Grids Cells regular: 0 45 covered: 0 1000 cut: 1 80 **************************************** Clean up auto-generated particles. IC Region Generated Removed Remaining **************** **************** **************** **************** fluid-only 0 0 0 bed 2,578 2,409 169 ---------------- ---------------- ---------------- ---------------- Total 2,578 2,409 169 **************** **************** **************** **************** On level 0: set volume fraction bcs Setting original sum_vol to 0.644240679 On level 0 fillpatch epf On level 0 fillpatch rho On level 0 fillpatch vel On level 0 fillpatch tracer On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Initial projection: Before projection: max(abs(u/v/w)) = 0 1.301306859 1.301322376 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 0.4567430634 0.4800854565 0.4809140291 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Doing initial pressure iterations with dt = 0.01257412738 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs In initial_iterations: iter = 0 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.017139295 MLMG: Initial rhs = 4.835568549 MLMG: Initial residual (resid0) = 4.835568549 MLMG: Final Iter. 12 resid, resid/bnorm = 1.968203378e-12, 4.070262593e-13 MLMG: Timers: Solve = 0.01016176 Iter = 0.009538155 Bottom = 0.008268911 >> After projection * On level 0 max(abs(diveu)) = 3.197270756e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.33756049 0.3780877691 0.3699385177 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.79760631 0.6100276728 0.5664874126 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 1 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 10.4853732 MLMG: Initial rhs = 10.4853732 MLMG: Initial residual (resid0) = 10.4853732 MLMG: Final Iter. 12 resid, resid/bnorm = 2.330580173e-12, 2.222696445e-13 MLMG: Timers: Solve = 0.009589846 Iter = 0.009341359 Bottom = 0.008098529 >> After projection * On level 0 max(abs(diveu)) = 3.785145863e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.23995444 0.5199710549 0.5238801064 max(abs(gpx/gpy/gpz)) = 295.8872456 45.1669838 28.26996318 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.81987612 0.6941997602 0.6359333758 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 2 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 14.37329812 MLMG: Initial rhs = 14.37329812 MLMG: Initial residual (resid0) = 14.37329812 MLMG: Final Iter. 11 resid, resid/bnorm = 1.1165735e-11, 7.768387543e-13 MLMG: Timers: Solve = 0.008798965 Iter = 0.0085549 Bottom = 0.007406152 >> After projection * On level 0 max(abs(diveu)) = 1.814495591e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.78293487 0.6266199411 0.6349165138 max(abs(gpx/gpy/gpz)) = 390.9286134 77.9882253 50.14779836 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.79935856 0.7720344896 0.7080983927 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs Enclosed domain volume is 0.644240679 Time spent in init 0.174138027 Writing plotfile TracerAdv-Godunov_plt00000 at time 0 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 1: from old_time 0 to new time 0.01051749057 with dt = 0.01051749057 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 12.369553 MLMG: Initial rhs = 12.369553 MLMG: Initial residual (resid0) = 12.369553 MLMG: Final Iter. 11 resid, resid/bnorm = 1.017741447e-11, 8.227794865e-13 MLMG: Timers: Solve = 0.008807494 Iter = 0.008581818 Bottom = 0.007421605 >> After projection * On level 0 max(abs(diveu)) = 1.653960501e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 11.12110156 0.5324896836 0.466679577 max(abs(gpx/gpy/gpz)) = 434.4340015 97.02029322 64.79227887 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 10.86938803 0.5585745428 0.5329957274 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.01051749057 done. Time per fluid step 0.031362955 Time per 2 particle steps 0.000331569 Coupling time per step 0.002808402 Sum tracer volume wgt = 157.4737083 141.6092391 Time per step 0.035778262 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 2: from old_time 0.01051749057 to new time 0.01927686292 with dt = 0.008759372356 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 17.31000424 MLMG: Initial rhs = 17.31000424 MLMG: Initial residual (resid0) = 17.31000424 MLMG: Final Iter. 11 resid, resid/bnorm = 1.286393214e-11, 7.431501437e-13 MLMG: Timers: Solve = 0.008781286 Iter = 0.00855561 Bottom = 0.007406844 >> After projection * On level 0 max(abs(diveu)) = 2.092661987e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 17.55610581 0.6036004169 0.4300982664 max(abs(gpx/gpy/gpz)) = 403.1132522 79.17461873 51.70278265 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 18.46969356 0.9182793008 0.8569238819 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.008759372356 done. Time per fluid step 0.031570127 Time per 1 particle steps 0.00014201 Coupling time per step 0.002162454 Sum tracer volume wgt = 158.5308511 141.6125147 Time per step 0.034985948 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 3: from old_time 0.01927686292 to new time 0.02621178134 with dt = 0.006934918414 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 28.80074793 MLMG: Initial rhs = 28.80074793 MLMG: Initial residual (resid0) = 28.80074793 MLMG: Final Iter. 11 resid, resid/bnorm = 1.813260653e-11, 6.295880431e-13 MLMG: Timers: Solve = 0.007726577 Iter = 0.007491534 Bottom = 0.006444554 >> After projection * On level 0 max(abs(diveu)) = 2.924760698e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 21.4394874 0.9687830635 0.6923853637 max(abs(gpx/gpy/gpz)) = 699.8652942 125.1531953 84.90962724 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 22.79725955 1.312849642 1.021279975 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006934918414 done. Time per fluid step 0.029319076 Time per 1 particle steps 0.000139216 Coupling time per step 0.002169944 Sum tracer volume wgt = 160.291058 141.6164904 Time per step 0.032731127 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 4: from old_time 0.02621178134 to new time 0.0322703227 with dt = 0.006058541366 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 37.016164 MLMG: Initial rhs = 37.016164 MLMG: Initial residual (resid0) = 37.016164 MLMG: Final Iter. 11 resid, resid/bnorm = 3.059346181e-11, 8.264892551e-13 MLMG: Timers: Solve = 0.00767841 Iter = 0.007473245 Bottom = 0.00643239 >> After projection * On level 0 max(abs(diveu)) = 4.470492536e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 24.81331906 1.349374868 0.954738929 max(abs(gpx/gpy/gpz)) = 1040.775225 172.4393931 132.0926466 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 25.28356557 1.499080081 1.130285115 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006058541366 done. Time per fluid step 0.029256207 Time per 1 particle steps 0.000161871 Coupling time per step 0.002139111 Sum tracer volume wgt = 162.0708061 141.6337217 Time per step 0.032644952 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 5: from old_time 0.0322703227 to new time 0.0378954351 with dt = 0.005625112391 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.39971891 MLMG: Initial rhs = 41.39971891 MLMG: Initial residual (resid0) = 41.39971891 MLMG: Final Iter. 11 resid, resid/bnorm = 4.11985143e-11, 9.951399522e-13 MLMG: Timers: Solve = 0.007678152 Iter = 0.007454706 Bottom = 0.006416847 >> After projection * On level 0 max(abs(diveu)) = 6.216886713e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 27.07193361 1.547710639 1.112015313 max(abs(gpx/gpy/gpz)) = 1263.557775 200.8287885 167.6985518 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 26.79031623 1.501409355 1.168526792 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005625112391 done. Time per fluid step 0.029460745 Time per 1 particle steps 0.000163531 Coupling time per step 0.002089434 Sum tracer volume wgt = 163.2224811 141.6422066 Time per step 0.032785542 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 6: from old_time 0.0378954351 to new time 0.04328357325 with dt = 0.005388138158 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 42.48507765 MLMG: Initial rhs = 42.48507765 MLMG: Initial residual (resid0) = 42.48507765 MLMG: Final Iter. 11 resid, resid/bnorm = 3.849817588e-11, 9.06157597e-13 MLMG: Timers: Solve = 0.007659882 Iter = 0.00745404 Bottom = 0.00641401 >> After projection * On level 0 max(abs(diveu)) = 6.079146506e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 29.00414539 1.599335442 1.123864593 max(abs(gpx/gpy/gpz)) = 1384.562989 211.1793193 184.7751179 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 27.82008009 1.422266343 1.113647729 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005388138158 done. Time per fluid step 0.028809209 Time per 1 particle steps 0.000204474 Coupling time per step 0.002103697 Sum tracer volume wgt = 163.4581303 141.6543088 Time per step 0.032204325 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 7: from old_time 0.04328357325 to new time 0.04852246445 with dt = 0.0052388912 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.69317411 MLMG: Initial rhs = 41.69317411 MLMG: Initial residual (resid0) = 41.69317411 MLMG: Final Iter. 11 resid, resid/bnorm = 4.015795836e-11, 9.631782471e-13 MLMG: Timers: Solve = 0.007748785 Iter = 0.007513024 Bottom = 0.006456729 >> After projection * On level 0 max(abs(diveu)) = 6.002236837e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.22672303 1.562051955 1.047501782 max(abs(gpx/gpy/gpz)) = 1439.457235 212.5317304 188.01703 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 28.63804191 1.371192472 1.14128268 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.0052388912 done. Time per fluid step 0.029184722 Time per 1 particle steps 0.000150136 Coupling time per step 0.002030221 Sum tracer volume wgt = 162.7429911 141.6465736 Time per step 0.03239922 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 8: from old_time 0.04852246445 to new time 0.05365081644 with dt = 0.00512835199 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 40.46612365 MLMG: Initial rhs = 40.46612365 MLMG: Initial residual (resid0) = 40.46612365 MLMG: Final Iter. 11 resid, resid/bnorm = 3.471977681e-11, 8.579961133e-13 MLMG: Timers: Solve = 0.007727801 Iter = 0.007494704 Bottom = 0.006446085 >> After projection * On level 0 max(abs(diveu)) = 4.932909199e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.91898666 1.48544798 0.9635600481 max(abs(gpx/gpy/gpz)) = 1459.375323 213.5142235 183.5016745 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.35330299 1.281839069 1.173111544 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.00512835199 done. Time per fluid step 0.028972637 Time per 1 particle steps 0.000157872 Coupling time per step 0.002031868 Sum tracer volume wgt = 161.5881218 141.636756 Time per step 0.032257205 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 9: from old_time 0.05365081644 to new time 0.05868741866 with dt = 0.005036602218 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 39.27364518 MLMG: Initial rhs = 39.27364518 MLMG: Initial residual (resid0) = 39.27364518 MLMG: Final Iter. 11 resid, resid/bnorm = 3.709693644e-11, 9.445758413e-13 MLMG: Timers: Solve = 0.007956101 Iter = 0.007713871 Bottom = 0.006605307 >> After projection * On level 0 max(abs(diveu)) = 4.94611602e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.35815867 1.406563792 0.9201209009 max(abs(gpx/gpy/gpz)) = 1465.706394 217.8933493 179.7221314 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.97124236 1.182819347 1.2028124 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005036602218 done. Time per fluid step 0.029538486 Time per 1 particle steps 0.000141609 Coupling time per step 0.002244461 Sum tracer volume wgt = 160.4725519 141.6260687 Time per step 0.033031311 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 10: from old_time 0.05868741866 to new time 0.063647095 with dt = 0.004959676334 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 38.42045019 MLMG: Initial rhs = 38.42045019 MLMG: Initial residual (resid0) = 38.42045019 MLMG: Final Iter. 11 resid, resid/bnorm = 3.630694381e-11, 9.449900673e-13 MLMG: Timers: Solve = 0.007664852 Iter = 0.007459687 Bottom = 0.006417733 >> After projection * On level 0 max(abs(diveu)) = 4.929336058e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.71000727 1.343760511 0.9051258287 max(abs(gpx/gpy/gpz)) = 1466.605723 218.5613903 180.0542151 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 30.46023494 1.135052905 1.231448948 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.004959676334 done. Time per fluid step 0.02882024 Time per 1 particle steps 0.000153957 Coupling time per step 0.002244502 Sum tracer volume wgt = 159.7562848 141.6192527 Time per step 0.032270258 Writing plotfile TracerAdv-Godunov_plt00010 at time 0.063647095 Time spent in main (after init) 0.337605952 Time spent in main 0.511743979 Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [6621 ... 6621] [The Arena] max space (MB) allocated spread across MPI: [97 ... 97] [The Arena] max space (MB) used spread across MPI: [82 ... 82] [The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Managed Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [0 ... 0] AMReX (26.09-122-ga846c6a9c672) finalized