Initializing AMReX (26.09-125-g523e7305089a)... MPI initialized with 1 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.09-125-g523e7305089a) initialized MFIX git describe: 26.09-8-g1f6ffc02157b AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5 Number of levels: 1 RunType is Standard Auto-generating level-set parameters: eb_refinement = 1 levelset_pad = 8 eb_pad = 8 ================================================================================ Warning: Overwriting amr.check_file with value from mfix.check_file ================================================================================ ================================================================================ Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest ================================================================================ ================================================================================ Warning: Overwriting amr.plot_int with value from output.plot.int ================================================================================ ================================================================================ Warning: Overwriting amr.plot_file with value from output.plot.file ================================================================================ Simulation is transient ================================================================================ Warning: mfix.stop_time and mfix.max_step are both defined. The simulation will end when either condition is met. ================================================================================ -------------------------------------------------------------------------------- Info: Max effective viscosity factor not specified. Using default 1e+06 -------------------------------------------------------------------------------- Scalar diffusion coefficients Tracer0: 0 Particle-particle conduction is disabled. Particle-fluid-particle conduction is disabled. Specified constant pressure drop: (1000,0,0) Load balance setup: Type: SingleGrid Strategy: KnapSack Weighting: ParticleRunTime ================================================================================ Warning: Regridding disabled for single level, single rank run. ================================================================================ Drag model: BVK2 Convection model not specified. Setting default: mfix.convection.model = RanzMarshall Building cylinder geometry. Internal Flow: 1 Radius: 0.49 Height: -1 Direction: 0 Rotation angle: 0 Rotation axis: 0 Center: 0.5, 1.5, 1.5 Done making the fluid eb levels ... PostProcessBaseGrids Making new level 0 from scratch On level 0 updated BC areas: Auto generating particles ... Total number of generated particles: 2,578 Time spent in initializing particles 0.020723175 **************************************** Coverage report: Grids Cells regular: 0 45 covered: 0 1000 cut: 1 80 **************************************** Clean up auto-generated particles. IC Region Generated Removed Remaining **************** **************** **************** **************** fluid-only 0 0 0 bed 2,578 2,409 169 ---------------- ---------------- ---------------- ---------------- Total 2,578 2,409 169 **************** **************** **************** **************** On level 0: set volume fraction bcs Setting original sum_vol to 0.644240679 On level 0 fillpatch epf On level 0 fillpatch rho On level 0 fillpatch vel On level 0 fillpatch tracer On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Initial projection: Before projection: max(abs(u/v/w)) = 0 1.301306859 1.301322376 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 0.4567430634 0.4800854565 0.4809140291 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Doing initial pressure iterations with dt = 0.01257412738 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs In initial_iterations: iter = 0 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.017139295 MLMG: Initial rhs = 4.835568549 MLMG: Initial residual (resid0) = 4.835568549 MLMG: Final Iter. 12 resid, resid/bnorm = 1.968203378e-12, 4.070262593e-13 MLMG: Timers: Solve = 0.010220135 Iter = 0.009579183 Bottom = 0.008313388 >> After projection * On level 0 max(abs(diveu)) = 3.197071038e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.33756049 0.3780877691 0.3699385177 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.79760631 0.6100276728 0.5664874126 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 1 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 10.4853732 MLMG: Initial rhs = 10.4853732 MLMG: Initial residual (resid0) = 10.4853732 MLMG: Final Iter. 12 resid, resid/bnorm = 2.33235653e-12, 2.224390574e-13 MLMG: Timers: Solve = 0.009833882 Iter = 0.009576315 Bottom = 0.008275711 >> After projection * On level 0 max(abs(diveu)) = 3.785127706e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.23995444 0.5199710549 0.5238801064 max(abs(gpx/gpy/gpz)) = 295.8872456 45.1669838 28.26996318 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.81987612 0.6941997602 0.6359333758 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 2 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 14.37329812 MLMG: Initial rhs = 14.37329812 MLMG: Initial residual (resid0) = 14.37329812 MLMG: Final Iter. 11 resid, resid/bnorm = 1.116506887e-11, 7.767924091e-13 MLMG: Timers: Solve = 0.008878561 Iter = 0.008615369 Bottom = 0.007455766 >> After projection * On level 0 max(abs(diveu)) = 1.814368498e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.78293487 0.6266199411 0.6349165138 max(abs(gpx/gpy/gpz)) = 390.9286134 77.9882253 50.14779836 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.79935856 0.7720344896 0.7080983927 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs Enclosed domain volume is 0.644240679 Time spent in init 0.177632179 Writing plotfile TracerAdv-Godunov_plt00000 at time 0 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 1: from old_time 0 to new time 0.01051749057 with dt = 0.01051749057 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 12.369553 MLMG: Initial rhs = 12.369553 MLMG: Initial residual (resid0) = 12.369553 MLMG: Final Iter. 11 resid, resid/bnorm = 1.017697038e-11, 8.227435847e-13 MLMG: Timers: Solve = 0.008836639 Iter = 0.008606356 Bottom = 0.007449461 >> After projection * On level 0 max(abs(diveu)) = 1.653967764e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 11.12110156 0.5324896836 0.466679577 max(abs(gpx/gpy/gpz)) = 434.4340015 97.02029322 64.79227887 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 10.86938803 0.5585745428 0.5329957274 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.01051749057 done. Time per fluid step 0.031713064 Time per 2 particle steps 0.000319777 Coupling time per step 0.002858434 Sum tracer volume wgt = 157.4737083 141.6092391 Time per step 0.036184593 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 2: from old_time 0.01051749057 to new time 0.01927686292 with dt = 0.008759372356 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 17.31000424 MLMG: Initial rhs = 17.31000424 MLMG: Initial residual (resid0) = 17.31000424 MLMG: Final Iter. 11 resid, resid/bnorm = 1.28617117e-11, 7.430218684e-13 MLMG: Timers: Solve = 0.009184656 Iter = 0.00892757 Bottom = 0.007689597 >> After projection * On level 0 max(abs(diveu)) = 2.092807237e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 17.55610581 0.6036004169 0.4300982664 max(abs(gpx/gpy/gpz)) = 403.1132522 79.17461873 51.70278265 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 18.46969356 0.9182793008 0.8569238819 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.008759372356 done. Time per fluid step 0.032681141 Time per 1 particle steps 0.000182314 Coupling time per step 0.002301475 Sum tracer volume wgt = 158.5308511 141.6125147 Time per step 0.036352075 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 3: from old_time 0.01927686292 to new time 0.02621178134 with dt = 0.006934918414 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 28.80074793 MLMG: Initial rhs = 28.80074793 MLMG: Initial residual (resid0) = 28.80074793 MLMG: Final Iter. 11 resid, resid/bnorm = 1.813083017e-11, 6.295263656e-13 MLMG: Timers: Solve = 0.008841403 Iter = 0.008616534 Bottom = 0.007461217 >> After projection * On level 0 max(abs(diveu)) = 2.925022147e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 21.4394874 0.9687830635 0.6923853637 max(abs(gpx/gpy/gpz)) = 699.8652942 125.1531953 84.90962724 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 22.79725955 1.312849642 1.021279975 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006934918414 done. Time per fluid step 0.032873313 Time per 1 particle steps 0.00017236 Coupling time per step 0.002313882 Sum tracer volume wgt = 160.291058 141.6164904 Time per step 0.036690809 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 4: from old_time 0.02621178134 to new time 0.0322703227 with dt = 0.006058541366 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 37.016164 MLMG: Initial rhs = 37.016164 MLMG: Initial residual (resid0) = 37.016164 MLMG: Final Iter. 11 resid, resid/bnorm = 3.059745167e-11, 8.265970421e-13 MLMG: Timers: Solve = 0.008894743 Iter = 0.00864025 Bottom = 0.007467909 >> After projection * On level 0 max(abs(diveu)) = 4.472424356e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 24.81331906 1.349374868 0.954738929 max(abs(gpx/gpy/gpz)) = 1040.775225 172.4393931 132.0926466 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 25.28356557 1.499080081 1.130285115 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006058541366 done. Time per fluid step 0.032584622 Time per 1 particle steps 0.000200095 Coupling time per step 0.002224363 Sum tracer volume wgt = 162.0708061 141.6337217 Time per step 0.036362907 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 5: from old_time 0.0322703227 to new time 0.0378954351 with dt = 0.005625112391 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.39971891 MLMG: Initial rhs = 41.39971891 MLMG: Initial residual (resid0) = 41.39971891 MLMG: Final Iter. 11 resid, resid/bnorm = 4.120090822e-11, 9.951977767e-13 MLMG: Timers: Solve = 0.008134266 Iter = 0.007895443 Bottom = 0.006751323 >> After projection * On level 0 max(abs(diveu)) = 6.217235312e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 27.07193361 1.547710639 1.112015313 max(abs(gpx/gpy/gpz)) = 1263.557775 200.8287885 167.6985518 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 26.79031623 1.501409355 1.168526792 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005625112391 done. Time per fluid step 0.030071899 Time per 1 particle steps 0.000140713 Coupling time per step 0.002056171 Sum tracer volume wgt = 163.2224811 141.6422066 Time per step 0.033474209 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 6: from old_time 0.0378954351 to new time 0.04328357325 with dt = 0.005388138158 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 42.48507765 MLMG: Initial rhs = 42.48507765 MLMG: Initial residual (resid0) = 42.48507765 MLMG: Final Iter. 11 resid, resid/bnorm = 3.849578196e-11, 9.061012498e-13 MLMG: Timers: Solve = 0.007749706 Iter = 0.007512627 Bottom = 0.006464002 >> After projection * On level 0 max(abs(diveu)) = 6.079407956e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 29.00414539 1.599335442 1.123864593 max(abs(gpx/gpy/gpz)) = 1384.562989 211.1793193 184.7751179 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 27.82008009 1.422266343 1.113647729 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005388138158 done. Time per fluid step 0.029556492 Time per 1 particle steps 0.000142752 Coupling time per step 0.002123638 Sum tracer volume wgt = 163.4581303 141.6543088 Time per step 0.032993796 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 7: from old_time 0.04328357325 to new time 0.04852246445 with dt = 0.0052388912 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.69317411 MLMG: Initial rhs = 41.69317411 MLMG: Initial residual (resid0) = 41.69317411 MLMG: Final Iter. 11 resid, resid/bnorm = 4.016035227e-11, 9.632356646e-13 MLMG: Timers: Solve = 0.007776837 Iter = 0.007537746 Bottom = 0.006478538 >> After projection * On level 0 max(abs(diveu)) = 6.002323987e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.22672303 1.562051955 1.047501782 max(abs(gpx/gpy/gpz)) = 1439.457235 212.5317304 188.01703 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 28.63804191 1.371192472 1.14128268 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.0052388912 done. Time per fluid step 0.029888608 Time per 1 particle steps 0.00014031 Coupling time per step 0.00211537 Sum tracer volume wgt = 162.7429911 141.6465736 Time per step 0.033229267 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 8: from old_time 0.04852246445 to new time 0.05365081644 with dt = 0.00512835199 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 40.46612365 MLMG: Initial rhs = 40.46612365 MLMG: Initial residual (resid0) = 40.46612365 MLMG: Final Iter. 11 resid, resid/bnorm = 3.471977681e-11, 8.579961133e-13 MLMG: Timers: Solve = 0.00784564 Iter = 0.007604927 Bottom = 0.00652293 >> After projection * On level 0 max(abs(diveu)) = 4.932952774e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.91898666 1.48544798 0.9635600481 max(abs(gpx/gpy/gpz)) = 1459.375323 213.5142235 183.5016745 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.35330299 1.281839069 1.173111544 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.00512835199 done. Time per fluid step 0.029133318 Time per 1 particle steps 0.000170533 Coupling time per step 0.002110605 Sum tracer volume wgt = 161.5881218 141.636756 Time per step 0.03255256 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 9: from old_time 0.05365081644 to new time 0.05868741866 with dt = 0.005036602218 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 39.27364518 MLMG: Initial rhs = 39.27364518 MLMG: Initial residual (resid0) = 39.27364518 MLMG: Final Iter. 11 resid, resid/bnorm = 3.709773441e-11, 9.445961596e-13 MLMG: Timers: Solve = 0.007773902 Iter = 0.007535354 Bottom = 0.006481244 >> After projection * On level 0 max(abs(diveu)) = 4.946620762e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.35815867 1.406563792 0.9201209009 max(abs(gpx/gpy/gpz)) = 1465.706394 217.8933493 179.7221314 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.97124236 1.182819347 1.2028124 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005036602218 done. Time per fluid step 0.029509316 Time per 1 particle steps 0.000168893 Coupling time per step 0.002156789 Sum tracer volume wgt = 160.4725519 141.6260687 Time per step 0.032996737 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 10: from old_time 0.05868741866 to new time 0.063647095 with dt = 0.004959676334 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 38.42045019 MLMG: Initial rhs = 38.42045019 MLMG: Initial residual (resid0) = 38.42045019 MLMG: Final Iter. 11 resid, resid/bnorm = 3.630774178e-11, 9.450108368e-13 MLMG: Timers: Solve = 0.007804879 Iter = 0.007565071 Bottom = 0.006488595 >> After projection * On level 0 max(abs(diveu)) = 4.929975157e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.71000727 1.343760511 0.9051258287 max(abs(gpx/gpy/gpz)) = 1466.605723 218.5613903 180.0542151 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 30.46023494 1.135052905 1.231448948 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.004959676334 done. Time per fluid step 0.029393235 Time per 1 particle steps 0.000180327 Coupling time per step 0.002231078 Sum tracer volume wgt = 159.7562848 141.6192527 Time per step 0.033091465 Writing plotfile TracerAdv-Godunov_plt00010 at time 0.063647095 Time spent in main (after init) 0.350492057 Time spent in main 0.528124236 Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [6621 ... 6621] [The Arena] max space (MB) allocated spread across MPI: [97 ... 97] [The Arena] max space (MB) used spread across MPI: [83 ... 83] [The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Managed Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [0 ... 0] AMReX (26.09-125-g523e7305089a) finalized