Initializing AMReX (26.09-173-ga0da80d18121)... MPI initialized with 1 MPI processes MPI initialized with thread support level 0 Initializing CUDA... CUDA initialized with 1 device. AMReX (26.09-173-ga0da80d18121) initialized MFIX git describe: 26.09-9-g69f87333fb2c AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5 Number of levels: 1 RunType is Standard Auto-generating level-set parameters: eb_refinement = 1 levelset_pad = 8 eb_pad = 8 ================================================================================ Warning: Overwriting amr.check_file with value from mfix.check_file ================================================================================ ================================================================================ Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest ================================================================================ ================================================================================ Warning: Overwriting amr.plot_int with value from output.plot.int ================================================================================ ================================================================================ Warning: Overwriting amr.plot_file with value from output.plot.file ================================================================================ Simulation is transient ================================================================================ Warning: mfix.stop_time and mfix.max_step are both defined. The simulation will end when either condition is met. ================================================================================ -------------------------------------------------------------------------------- Info: Max effective viscosity factor not specified. Using default 1e+06 -------------------------------------------------------------------------------- Scalar diffusion coefficients Tracer0: 0 Particle-particle conduction is disabled. Particle-fluid-particle conduction is disabled. Specified constant pressure drop: (1000,0,0) Load balance setup: Type: SingleGrid Strategy: KnapSack Weighting: ParticleRunTime ================================================================================ Warning: Regridding disabled for single level, single rank run. ================================================================================ Drag model: BVK2 Convection model not specified. Setting default: mfix.convection.model = RanzMarshall Building cylinder geometry. Internal Flow: 1 Radius: 0.49 Height: -1 Direction: 0 Rotation angle: 0 Rotation axis: 0 Center: 0.5, 1.5, 1.5 Done making the fluid eb levels ... PostProcessBaseGrids Making new level 0 from scratch On level 0 updated BC areas: Auto generating particles ... Total number of generated particles: 2,578 Time spent in initializing particles 0.020293753 **************************************** Coverage report: Grids Cells regular: 0 45 covered: 0 1000 cut: 1 80 **************************************** Clean up auto-generated particles. IC Region Generated Removed Remaining **************** **************** **************** **************** fluid-only 0 0 0 bed 2,578 2,409 169 ---------------- ---------------- ---------------- ---------------- Total 2,578 2,409 169 **************** **************** **************** **************** On level 0: set volume fraction bcs Setting original sum_vol to 0.644240679 On level 0 fillpatch epf On level 0 fillpatch rho On level 0 fillpatch vel On level 0 fillpatch tracer On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Initial projection: Before projection: max(abs(u/v/w)) = 0 1.301306859 1.301322376 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 0.4567430634 0.4800854565 0.4809140291 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Doing initial pressure iterations with dt = 0.01257412738 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs In initial_iterations: iter = 0 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.017139295 MLMG: Initial rhs = 4.835568549 MLMG: Initial residual (resid0) = 4.835568549 MLMG: Final Iter. 12 resid, resid/bnorm = 1.968647467e-12, 4.071180973e-13 MLMG: Timers: Solve = 0.010126412 Iter = 0.009497307 Bottom = 0.008239543 >> After projection * On level 0 max(abs(diveu)) = 3.195473292e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.33756049 0.3780877691 0.3699385177 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.79760631 0.6100276728 0.5664874126 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 1 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 10.4853732 MLMG: Initial rhs = 10.4853732 MLMG: Initial residual (resid0) = 10.4853732 MLMG: Final Iter. 12 resid, resid/bnorm = 2.331024263e-12, 2.223119978e-13 MLMG: Timers: Solve = 0.009594763 Iter = 0.009354498 Bottom = 0.008101617 >> After projection * On level 0 max(abs(diveu)) = 3.785309268e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.23995444 0.5199710549 0.5238801064 max(abs(gpx/gpy/gpz)) = 295.8872456 45.1669838 28.26996318 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.81987612 0.6941997602 0.6359333758 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 2 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 14.37329812 MLMG: Initial rhs = 14.37329812 MLMG: Initial residual (resid0) = 14.37329812 MLMG: Final Iter. 11 resid, resid/bnorm = 1.116484682e-11, 7.767769607e-13 MLMG: Timers: Solve = 0.008817379 Iter = 0.008591557 Bottom = 0.007435246 >> After projection * On level 0 max(abs(diveu)) = 1.81435942e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 12.78293487 0.6266199411 0.6349165138 max(abs(gpx/gpy/gpz)) = 390.9286134 77.9882253 50.14779836 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 12.79935856 0.7720344896 0.7080983927 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs Enclosed domain volume is 0.644240679 Time spent in init 0.175642109 Writing plotfile TracerAdv-Godunov_plt00000 at time 0 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 1: from old_time 0 to new time 0.01051749057 with dt = 0.01051749057 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 12.369553 MLMG: Initial rhs = 12.369553 MLMG: Initial residual (resid0) = 12.369553 MLMG: Final Iter. 11 resid, resid/bnorm = 1.017763651e-11, 8.227974374e-13 MLMG: Timers: Solve = 0.008803745 Iter = 0.008576684 Bottom = 0.007425186 >> After projection * On level 0 max(abs(diveu)) = 1.653802542e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 11.12110156 0.5324896836 0.466679577 max(abs(gpx/gpy/gpz)) = 434.4340015 97.02029322 64.79227887 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 10.86938803 0.5585745428 0.5329957274 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.01051749057 done. Time per fluid step 0.031993989 Time per 2 particle steps 0.000365054 Coupling time per step 0.002760955 Sum tracer volume wgt = 157.4737083 141.6092391 Time per step 0.03635855 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 2: from old_time 0.01051749057 to new time 0.01927686292 with dt = 0.008759372356 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 17.31000424 MLMG: Initial rhs = 17.31000424 MLMG: Initial residual (resid0) = 17.31000424 MLMG: Final Iter. 11 resid, resid/bnorm = 1.286259987e-11, 7.430731785e-13 MLMG: Timers: Solve = 0.008954085 Iter = 0.008697973 Bottom = 0.007512937 >> After projection * On level 0 max(abs(diveu)) = 2.092589362e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 17.55610581 0.6036004169 0.4300982664 max(abs(gpx/gpy/gpz)) = 403.1132522 79.17461873 51.70278265 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 18.46969356 0.9182793008 0.8569238819 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.008759372356 done. Time per fluid step 0.031352973 Time per 1 particle steps 0.000200141 Coupling time per step 0.002201244 Sum tracer volume wgt = 158.5308511 141.6125147 Time per step 0.034858241 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 3: from old_time 0.01927686292 to new time 0.02621178134 with dt = 0.006934918414 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 28.80074793 MLMG: Initial rhs = 28.80074793 MLMG: Initial residual (resid0) = 28.80074793 MLMG: Final Iter. 11 resid, resid/bnorm = 1.813171835e-11, 6.295572043e-13 MLMG: Timers: Solve = 0.007678695 Iter = 0.007471751 Bottom = 0.006429873 >> After projection * On level 0 max(abs(diveu)) = 2.925414321e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 21.4394874 0.9687830635 0.6923853637 max(abs(gpx/gpy/gpz)) = 699.8652942 125.1531953 84.90962724 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 22.79725955 1.312849642 1.021279975 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006934918414 done. Time per fluid step 0.029717495 Time per 1 particle steps 0.000178349 Coupling time per step 0.002106405 Sum tracer volume wgt = 160.291058 141.6164904 Time per step 0.03325859 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 4: from old_time 0.02621178134 to new time 0.0322703227 with dt = 0.006058541366 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 37.016164 MLMG: Initial rhs = 37.016164 MLMG: Initial residual (resid0) = 37.016164 MLMG: Final Iter. 11 resid, resid/bnorm = 3.059824964e-11, 8.266185995e-13 MLMG: Timers: Solve = 0.007726799 Iter = 0.00749105 Bottom = 0.006439413 >> After projection * On level 0 max(abs(diveu)) = 4.471407609e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 24.81331906 1.349374868 0.954738929 max(abs(gpx/gpy/gpz)) = 1040.775225 172.4393931 132.0926466 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 25.28356557 1.499080081 1.130285115 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006058541366 done. Time per fluid step 0.029360584 Time per 1 particle steps 0.000178253 Coupling time per step 0.002127021 Sum tracer volume wgt = 162.0708061 141.6337217 Time per step 0.032938627 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 5: from old_time 0.0322703227 to new time 0.0378954351 with dt = 0.005625112391 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.39971891 MLMG: Initial rhs = 41.39971891 MLMG: Initial residual (resid0) = 41.39971891 MLMG: Final Iter. 11 resid, resid/bnorm = 4.119771633e-11, 9.951206774e-13 MLMG: Timers: Solve = 0.007689222 Iter = 0.007483236 Bottom = 0.006436354 >> After projection * On level 0 max(abs(diveu)) = 6.218135859e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 27.07193361 1.547710639 1.112015313 max(abs(gpx/gpy/gpz)) = 1263.557775 200.8287885 167.6985518 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 26.79031623 1.501409355 1.168526792 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005625112391 done. Time per fluid step 0.029365229 Time per 1 particle steps 0.000192154 Coupling time per step 0.002213194 Sum tracer volume wgt = 163.2224811 141.6422066 Time per step 0.03309332 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 6: from old_time 0.0378954351 to new time 0.04328357325 with dt = 0.005388138158 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 42.48507765 MLMG: Initial rhs = 42.48507765 MLMG: Initial residual (resid0) = 42.48507765 MLMG: Final Iter. 11 resid, resid/bnorm = 3.84973779e-11, 9.061388146e-13 MLMG: Timers: Solve = 0.007748193 Iter = 0.007511529 Bottom = 0.006433368 >> After projection * On level 0 max(abs(diveu)) = 6.079814655e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 29.00414539 1.599335442 1.123864593 max(abs(gpx/gpy/gpz)) = 1384.562989 211.1793193 184.7751179 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 27.82008009 1.422266343 1.113647729 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005388138158 done. Time per fluid step 0.029603449 Time per 1 particle steps 0.000179655 Coupling time per step 0.002124095 Sum tracer volume wgt = 163.4581303 141.6543088 Time per step 0.033115701 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 7: from old_time 0.04328357325 to new time 0.04852246445 with dt = 0.0052388912 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 41.69317411 MLMG: Initial rhs = 41.69317411 MLMG: Initial residual (resid0) = 41.69317411 MLMG: Final Iter. 11 resid, resid/bnorm = 4.016274619e-11, 9.632930821e-13 MLMG: Timers: Solve = 0.007697701 Iter = 0.007467954 Bottom = 0.006425316 >> After projection * On level 0 max(abs(diveu)) = 6.002411137e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.22672303 1.562051955 1.047501782 max(abs(gpx/gpy/gpz)) = 1439.457235 212.5317304 188.01703 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 28.63804191 1.371192472 1.14128268 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.0052388912 done. Time per fluid step 0.029593861 Time per 1 particle steps 0.000164501 Coupling time per step 0.002120707 Sum tracer volume wgt = 162.7429911 141.6465736 Time per step 0.033122622 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 8: from old_time 0.04852246445 to new time 0.05365081644 with dt = 0.00512835199 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 40.46612365 MLMG: Initial rhs = 40.46612365 MLMG: Initial residual (resid0) = 40.46612365 MLMG: Final Iter. 11 resid, resid/bnorm = 3.471897884e-11, 8.579763938e-13 MLMG: Timers: Solve = 0.00781744 Iter = 0.007579643 Bottom = 0.006489378 >> After projection * On level 0 max(abs(diveu)) = 4.932662275e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 30.91898666 1.48544798 0.9635600481 max(abs(gpx/gpy/gpz)) = 1459.375323 213.5142235 183.5016745 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.35330299 1.281839069 1.173111544 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.00512835199 done. Time per fluid step 0.028886723 Time per 1 particle steps 0.000196787 Coupling time per step 0.00213758 Sum tracer volume wgt = 161.5881218 141.636756 Time per step 0.032424107 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 9: from old_time 0.05365081644 to new time 0.05868741866 with dt = 0.005036602218 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 39.27364518 MLMG: Initial rhs = 39.27364518 MLMG: Initial residual (resid0) = 39.27364518 MLMG: Final Iter. 11 resid, resid/bnorm = 3.709693644e-11, 9.445758413e-13 MLMG: Timers: Solve = 0.007806992 Iter = 0.007570452 Bottom = 0.006505445 >> After projection * On level 0 max(abs(diveu)) = 4.94591267e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.35815867 1.406563792 0.9201209009 max(abs(gpx/gpy/gpz)) = 1465.706394 217.8933493 179.7221314 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 29.97124236 1.182819347 1.2028124 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005036602218 done. Time per fluid step 0.028755659 Time per 1 particle steps 0.000140872 Coupling time per step 0.002059482 Sum tracer volume wgt = 160.4725519 141.6260687 Time per step 0.032208849 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 10: from old_time 0.05868741866 to new time 0.063647095 with dt = 0.004959676334 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 38.42045019 MLMG: Initial rhs = 38.42045019 MLMG: Initial residual (resid0) = 38.42045019 MLMG: Final Iter. 11 resid, resid/bnorm = 3.630454989e-11, 9.449277589e-13 MLMG: Timers: Solve = 0.007732253 Iter = 0.007495601 Bottom = 0.006441377 >> After projection * On level 0 max(abs(diveu)) = 4.92860981e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 31.71000727 1.343760511 0.9051258287 max(abs(gpx/gpy/gpz)) = 1466.605723 218.5613903 180.0542151 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 30.46023494 1.135052905 1.231448948 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.004959676334 done. Time per fluid step 0.028926287 Time per 1 particle steps 0.00016699 Coupling time per step 0.002076571 Sum tracer volume wgt = 159.7562848 141.6192527 Time per step 0.032299566 Writing plotfile TracerAdv-Godunov_plt00010 at time 0.063647095 Time spent in main (after init) 0.340335277 Time spent in main 0.515977386 Total GPU global memory (MB) spread across MPI: [7965 ... 7965] Free GPU global memory (MB) spread across MPI: [6621 ... 6621] [The Arena] max space (MB) allocated spread across MPI: [97 ... 97] [The Arena] max space (MB) used spread across MPI: [83 ... 83] [The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Managed Arena] max space (MB) used spread across MPI: [0 ... 0] [The Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8] [The Pinned Arena] max space (MB) used spread across MPI: [0 ... 0] AMReX (26.09-173-ga0da80d18121) finalized