Initializing AMReX (26.10-97-gf5d545d2f0b0)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.10-97-gf5d545d2f0b0) initialized
   MFIX git describe: 26.10-32-g94b2297c1981
AMReX-Hydro git hash: a153304acd787205b170b0f7fd8284627e076056
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.03957694848
MLMG: Iteration   2 Fine resid/bnorm = 0.0004626124973
MLMG: Iteration   3 Fine resid/bnorm = 8.237525509e-06
MLMG: Iteration   4 Fine resid/bnorm = 1.349267965e-07
MLMG: Iteration   5 Fine resid/bnorm = 9.501683126e-09
MLMG: Iteration   6 Fine resid/bnorm = 7.422875521e-10
MLMG: Iteration   7 Fine resid/bnorm = 6.336667547e-11
MLMG: Iteration   8 Fine resid/bnorm = 6.218014001e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.262786187e-09
MLMG: Iteration   9 Fine resid/bnorm = 6.8628563e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.781842765e-10
MLMG: Iteration  10 Fine resid/bnorm = 7.774359551e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.540370873e-11
MLMG: Iteration  11 Fine resid/bnorm = 1.57585263e-14
MLMG: Iteration  11 Crse resid/bnorm = 3.641314456e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 2.175447798e-10, 3.641314456e-12
MLMG: Timers: Solve = 0.057150369 Iter = 0.050110803 Bottom = 0.026652603
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  8.165646978e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  2.167516167e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08883993017
MLMG: Iteration   2 Fine resid/bnorm = 0.00370075107
MLMG: Iteration   3 Fine resid/bnorm = 0.0001762827116
MLMG: Iteration   4 Fine resid/bnorm = 9.105364091e-06
MLMG: Iteration   5 Fine resid/bnorm = 4.605502897e-07
MLMG: Iteration   6 Fine resid/bnorm = 2.305135751e-08
MLMG: Iteration   7 Fine resid/bnorm = 1.10181233e-09
MLMG: Iteration   8 Fine resid/bnorm = 5.042235534e-11
MLMG: Iteration   9 Fine resid/bnorm = 2.188424561e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.12223535e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 7.834166952e-12, 2.188424561e-12
MLMG: Timers: Solve = 0.063424898 Iter = 0.061478324 Bottom = 0.04569831
 >> After projection
  * On level 0 max(abs(diveu)) = 1.053815955e-10
  * On level 1 max(abs(diveu)) = 1.219225044e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  7.413744626e-13
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  1.721597188e-12
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.02641234492
MLMG: Iteration   2 Fine resid/bnorm = 0.0003428351543
MLMG: Iteration   3 Fine resid/bnorm = 6.113879952e-06
MLMG: Iteration   4 Fine resid/bnorm = 6.719653269e-08
MLMG: Iteration   5 Fine resid/bnorm = 3.706448358e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.98938545e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.873286646e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.879694254e-12
MLMG: Iteration   8 Crse resid/bnorm = 5.392324883e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.968141066e-13
MLMG: Iteration   9 Crse resid/bnorm = 7.473597546e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.41926159e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.049347872e-11
MLMG: Iteration  11 Fine resid/bnorm = 7.009392718e-15
MLMG: Iteration  11 Crse resid/bnorm = 1.488095945e-12
MLMG: Final Iter. 11 resid, resid/bnorm = 6.623188109e-12, 1.488095945e-12
MLMG: Timers: Solve = 0.051201276 Iter = 0.047452111 Bottom = 0.026336533
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  7.660972318e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  1.873958546e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.02349870414
MLMG: Iteration   2 Fine resid/bnorm = 0.001353880048
MLMG: Iteration   3 Fine resid/bnorm = 6.065083918e-05
MLMG: Iteration   4 Fine resid/bnorm = 3.006612082e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.530360961e-07
MLMG: Iteration   6 Fine resid/bnorm = 7.828745116e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.973911864e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.975494139e-11
MLMG: Iteration   9 Fine resid/bnorm = 9.543590486e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.023789094e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 2.58031015e-12, 9.543590486e-13
MLMG: Timers: Solve = 0.058039095 Iter = 0.057177312 Bottom = 0.043613385
 >> After projection
  * On level 0 max(abs(diveu)) = 3.049389933e-11
  * On level 1 max(abs(diveu)) = 3.324533854e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  7.711708232e-13
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  2.542699131e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  1.867275174e-12
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  5.960237278e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.005124006538
MLMG: Iteration   2 Fine resid/bnorm = 0.0001141614343
MLMG: Iteration   3 Fine resid/bnorm = 2.186948038e-06
MLMG: Iteration   4 Fine resid/bnorm = 3.741878587e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.671432077e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.406840127e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.17635193e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.012961928e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.03949845e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.070761333e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.358111977e-11
MLMG: Iteration  10 Fine resid/bnorm = 2.141683306e-14
MLMG: Iteration  10 Crse resid/bnorm = 1.835775481e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.271634382e-12, 1.835775481e-12
MLMG: Timers: Solve = 0.046952848 Iter = 0.043691504 Bottom = 0.026069312
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  7.920849148e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  2.009168154e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02220617583
MLMG: Iteration   2 Fine resid/bnorm = 0.001157741093
MLMG: Iteration   3 Fine resid/bnorm = 5.094845179e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.516346964e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.293113063e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.726580702e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.48637155e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.77320887e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.779516057e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.510358508e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.673546652e-12, 8.779516057e-13
MLMG: Timers: Solve = 0.059446274 Iter = 0.058584031 Bottom = 0.045056206
 >> After projection
  * On level 0 max(abs(diveu)) = 2.772857104e-11
  * On level 1 max(abs(diveu)) = 3.046131267e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  7.937784889e-13
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  3.617560365e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  2.001597034e-12
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  1.012731752e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.006947517479
MLMG: Iteration   2 Fine resid/bnorm = 0.0001291961343
MLMG: Iteration   3 Fine resid/bnorm = 2.31633972e-06
MLMG: Iteration   4 Fine resid/bnorm = 4.107342612e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.802890297e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.530576218e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.377127757e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.343985149e-12
MLMG: Iteration   8 Crse resid/bnorm = 3.823141991e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.304721919e-13
MLMG: Iteration   9 Crse resid/bnorm = 4.386322368e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 2.027881227e-12, 4.386322368e-12
MLMG: Timers: Solve = 0.041402608 Iter = 0.038127903 Bottom = 0.022523756
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  8.145956144e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  2.105241327e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      0.587373297

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649204
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.02196221238
MLMG: Iteration   2 Fine resid/bnorm = 0.001150278884
MLMG: Iteration   3 Fine resid/bnorm = 4.994673858e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.471429776e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.274041727e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.643698072e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.44667193e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.752058825e-11
MLMG: Iteration   9 Fine resid/bnorm = 8.64922994e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.621682425e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 2.621938843e-12, 8.64922994e-13
MLMG: Timers: Solve = 0.059779933 Iter = 0.058904171 Bottom = 0.045158131
 >> After projection
  * On level 0 max(abs(diveu)) = 2.773309018e-11
  * On level 1 max(abs(diveu)) = 3.046762263e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  1.033134884e-12
   max(abs(gpx/gpy/gpz))  = 14.22686543  14.22686544  4.352259106e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.794661119e-12
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  1.323561901e-10
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.02502113287
MLMG: Iteration   2 Fine resid/bnorm = 0.0003070793314
MLMG: Iteration   3 Fine resid/bnorm = 5.420621051e-06
MLMG: Iteration   4 Fine resid/bnorm = 7.622310918e-08
MLMG: Iteration   5 Fine resid/bnorm = 5.317553309e-09
MLMG: Iteration   6 Fine resid/bnorm = 4.377666583e-10
MLMG: Iteration   7 Fine resid/bnorm = 3.95395055e-11
MLMG: Iteration   8 Fine resid/bnorm = 3.881298278e-12
MLMG: Iteration   8 Crse resid/bnorm = 4.957239029e-10
MLMG: Iteration   9 Fine resid/bnorm = 3.907452395e-13
MLMG: Iteration   9 Crse resid/bnorm = 6.858565003e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.997065275e-14
MLMG: Iteration  10 Crse resid/bnorm = 9.622632211e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 4.117414396e-11, 9.622632211e-12
MLMG: Timers: Solve = 0.044700488 Iter = 0.041447649 Bottom = 0.02388053
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  1.028106389e-12
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  1.357503864e-12
   Time per fluid step      0.156823632
   Time per step        0.157699806
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.171859748
Time spent in main      0.759233045

Total GPU global memory (MB) spread across MPI: [7784 ... 7784]
Free  GPU global memory (MB) spread across MPI: [6380 ... 6380]
[The         Arena] max space (MB) allocated spread across MPI: [152 ... 152]
[The         Arena] max space (MB) used      spread across MPI: [126 ... 126]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [2 ... 2]
AMReX (26.10-97-gf5d545d2f0b0) finalized