Initializing AMReX (26.10-97-gf5d545d2f0b0)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.10-97-gf5d545d2f0b0) initialized
   MFIX git describe: 26.10-32-g94b2297c1981
AMReX-Hydro git hash: a153304acd787205b170b0f7fd8284627e076056
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 8
  eb_pad        = 8

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================


================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================


================================================================================
Warning: Overwriting amr.plot_int with value from output.plot.int
================================================================================


================================================================================
Warning: Overwriting amr.plot_file with value from output.plot.file
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Scalar diffusion coefficients
Tracer0: 0
Particle-particle conduction is disabled.
Particle-fluid-particle conduction is disabled.
Specified constant pressure drop: (1000,0,0)

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime


================================================================================
Warning: Regridding disabled for single level, single rank run.
================================================================================

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building cylinder geometry.
 
 Internal Flow: 1
 Radius:    0.49
 Height:    -1
 Direction: 0
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 1.5, 1.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
Auto generating particles ...
Total number of generated particles: 2,578
Time spent in initializing particles 0.020695544


****************************************
  Coverage report:  Grids        Cells
          regular:      0           45
          covered:      0         1000
              cut:      1           80
****************************************

Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  fluid-only                       0                 0                 0
  bed                          2,578             2,409               169
  ----------------  ----------------  ----------------  ----------------
  Total                        2,578             2,409               169
  ****************  ****************  ****************  ****************
On level 0: set volume fraction bcs
Setting original sum_vol to 0.644240679
On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 0 fillpatch tracer
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  1.301306859  1.301322376
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 0.4567430634  0.4800854565  0.4809140291
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
Doing initial pressure iterations with dt = 0.01257412738
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 0
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.017139295
MLMG: Initial rhs               = 4.835568549
MLMG: Initial residual (resid0) = 4.835568549
MLMG: Final Iter. 12 resid, resid/bnorm = 1.849631559e-12, 3.825054986e-13
MLMG: Timers: Solve = 0.010768398 Iter = 0.010100026 Bottom = 0.008815261
 >> After projection
  * On level 0 max(abs(diveu)) = 3.005804534e-12
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 12.33756049  0.3780877691  0.3699385177
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 12.79760631  0.6100276728  0.5664874126
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 10.4853732
MLMG: Initial rhs               = 10.4853732
MLMG: Initial residual (resid0) = 10.4853732
MLMG: Final Iter. 12 resid, resid/bnorm = 2.286615342e-12, 2.180766768e-13
MLMG: Timers: Solve = 0.010196224 Iter = 0.009938118 Bottom = 0.008657441
 >> After projection
  * On level 0 max(abs(diveu)) = 3.715398815e-12
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 12.23995444  0.5199710549  0.5238801064
   max(abs(gpx/gpy/gpz))  = 295.8872456  45.1669838  28.26996318
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 12.81987612  0.6941997602  0.6359333758
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 14.37329812
MLMG: Initial rhs               = 14.37329812
MLMG: Initial residual (resid0) = 14.37329812
MLMG: Final Iter. 11 resid, resid/bnorm = 1.145439299e-11, 7.969216875e-13
MLMG: Timers: Solve = 0.009260588 Iter = 0.009035236 Bottom = 0.007881268
 >> After projection
  * On level 0 max(abs(diveu)) = 1.849999589e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 12.78293487  0.6266199411  0.6349165138
   max(abs(gpx/gpy/gpz))  = 390.9286134  77.9882253  50.14779836
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 12.79935856  0.7720344896  0.7080983927
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
Enclosed domain volume is   0.644240679
Time spent in init      0.18669189

  Writing plotfile TracerAdv-Godunov_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 1: from old_time 0 to new time 0.01051749057 with dt = 0.01051749057

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 12.369553
MLMG: Initial rhs               = 12.369553
MLMG: Initial residual (resid0) = 12.369553
MLMG: Final Iter. 11 resid, resid/bnorm = 9.955591906e-12, 8.048465377e-13
MLMG: Timers: Solve = 0.008276487 Iter = 0.008029654 Bottom = 0.00695584
 >> After projection
  * On level 0 max(abs(diveu)) = 1.618686973e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 11.12110156  0.5324896836  0.466679577
   max(abs(gpx/gpy/gpz))  = 434.4340015  97.02029322  64.79227887
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 10.86938803  0.5585745428  0.5329957274
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.01051749057
done. 
   Time per fluid step      0.030290917
   Time per 2 particle steps 0.000352929
   Coupling time per step   0.003654369
Sum tracer volume wgt = 157.4737083 141.6092391
   Time per step        0.03556734

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 2: from old_time 0.01051749057 to new time 0.01927686292 with dt = 0.008759372356

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 17.31000424
MLMG: Initial rhs               = 17.31000424
MLMG: Initial residual (resid0) = 17.31000424
MLMG: Final Iter. 11 resid, resid/bnorm = 1.293631868e-11, 7.473319186e-13
MLMG: Timers: Solve = 0.008307495 Iter = 0.008064887 Bottom = 0.006974651
 >> After projection
  * On level 0 max(abs(diveu)) = 2.10461603e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 17.55610581  0.6036004169  0.4300982664
   max(abs(gpx/gpy/gpz))  = 403.1132522  79.17461873  51.70278265
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.46969356  0.9182793008  0.8569238819
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.008759372356
done. 
   Time per fluid step      0.031177716
   Time per 1 particle steps 0.000179158
   Coupling time per step   0.002707624
Sum tracer volume wgt = 158.5308511 141.6125147
   Time per step        0.035154933

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 3: from old_time 0.01927686292 to new time 0.02621178134 with dt = 0.006934918414

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 28.80074793
MLMG: Initial rhs               = 28.80074793
MLMG: Initial residual (resid0) = 28.80074793
MLMG: Final Iter. 11 resid, resid/bnorm = 1.828714957e-11, 6.349539817e-13
MLMG: Timers: Solve = 0.008201334 Iter = 0.007991157 Bottom = 0.006908506
 >> After projection
  * On level 0 max(abs(diveu)) = 2.947957061e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 21.4394874  0.9687830635  0.6923853637
   max(abs(gpx/gpy/gpz))  = 699.8652942  125.1531953  84.90962724
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 22.79725955  1.312849642  1.021279975
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.006934918414
done. 
   Time per fluid step      0.03164966
   Time per 1 particle steps 0.000175658
   Coupling time per step   0.002893303
Sum tracer volume wgt = 160.291058 141.6164904
   Time per step        0.035980142

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 4: from old_time 0.02621178134 to new time 0.0322703227 with dt = 0.006058541366

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 37.016164
MLMG: Initial rhs               = 37.016164
MLMG: Initial residual (resid0) = 37.016164
MLMG: Final Iter. 11 resid, resid/bnorm = 2.995109407e-11, 8.091355461e-13
MLMG: Timers: Solve = 0.008263266 Iter = 0.008022465 Bottom = 0.006932372
 >> After projection
  * On level 0 max(abs(diveu)) = 4.220837504e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 24.81331906  1.349374868  0.954738929
   max(abs(gpx/gpy/gpz))  = 1040.775225  172.4393931  132.0926466
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.28356557  1.499080081  1.130285115
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.006058541366
done. 
   Time per fluid step      0.031019077
   Time per 1 particle steps 0.000175758
   Coupling time per step   0.002678071
Sum tracer volume wgt = 162.0708061 141.6337217
   Time per step        0.03506677

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 5: from old_time 0.0322703227 to new time 0.0378954351 with dt = 0.005625112391

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 41.39971891
MLMG: Initial rhs               = 41.39971891
MLMG: Initial residual (resid0) = 41.39971891
MLMG: Final Iter. 11 resid, resid/bnorm = 4.035984536e-11, 9.748821109e-13
MLMG: Timers: Solve = 0.00831795 Iter = 0.008077828 Bottom = 0.006980779
 >> After projection
  * On level 0 max(abs(diveu)) = 5.895173349e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.07193361  1.547710639  1.112015313
   max(abs(gpx/gpy/gpz))  = 1263.557775  200.8287885  167.6985518
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 26.79031623  1.501409355  1.168526792
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.005625112391
done. 
   Time per fluid step      0.031103325
   Time per 1 particle steps 0.000175317
   Coupling time per step   0.00258052
Sum tracer volume wgt = 163.2224811 141.6422066
   Time per step        0.0350323

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 6: from old_time 0.0378954351 to new time 0.04328357325 with dt = 0.005388138158

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 42.48507765
MLMG: Initial rhs               = 42.48507765
MLMG: Initial residual (resid0) = 42.48507765
MLMG: Final Iter. 11 resid, resid/bnorm = 3.766110288e-11, 8.86454844e-13
MLMG: Timers: Solve = 0.008206019 Iter = 0.007966469 Bottom = 0.006895826
 >> After projection
  * On level 0 max(abs(diveu)) = 5.75640187e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.00414539  1.599335442  1.123864593
   max(abs(gpx/gpy/gpz))  = 1384.562989  211.1793193  184.7751179
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.82008009  1.422266343  1.113647729
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.005388138158
done. 
   Time per fluid step      0.031146484
   Time per 1 particle steps 0.000147972
   Coupling time per step   0.002677353
Sum tracer volume wgt = 163.4581303 141.6543088
   Time per step        0.035187291

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 7: from old_time 0.04328357325 to new time 0.04852246445 with dt = 0.0052388912

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 41.69317411
MLMG: Initial rhs               = 41.69317411
MLMG: Initial residual (resid0) = 41.69317411
MLMG: Final Iter. 11 resid, resid/bnorm = 3.939988463e-11, 9.449960447e-13
MLMG: Timers: Solve = 0.008029973 Iter = 0.007819733 Bottom = 0.006768378
 >> After projection
  * On level 0 max(abs(diveu)) = 5.708091849e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 30.22672303  1.562051955  1.047501782
   max(abs(gpx/gpy/gpz))  = 1439.457235  212.5317304  188.01703
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.63804191  1.371192472  1.14128268
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.0052388912
done. 
   Time per fluid step      0.031306425
   Time per 1 particle steps 0.000148506
   Coupling time per step   0.002975555
Sum tracer volume wgt = 162.7429911 141.6465736
   Time per step        0.035452707

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 8: from old_time 0.04852246445 to new time 0.05365081644 with dt = 0.00512835199

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 40.46612365
MLMG: Initial rhs               = 40.46612365
MLMG: Initial residual (resid0) = 40.46612365
MLMG: Final Iter. 11 resid, resid/bnorm = 3.38659464e-11, 8.368962319e-13
MLMG: Timers: Solve = 0.008035835 Iter = 0.007827646 Bottom = 0.006778568
 >> After projection
  * On level 0 max(abs(diveu)) = 4.601464111e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 30.91898666  1.48544798  0.9635600481
   max(abs(gpx/gpy/gpz))  = 1459.375323  213.5142235  183.5016745
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.35330299  1.281839069  1.173111544
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.00512835199
done. 
   Time per fluid step      0.030199319
   Time per 1 particle steps 0.000147781
   Coupling time per step   0.002822719
Sum tracer volume wgt = 161.5881218 141.636756
   Time per step        0.034410327

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 9: from old_time 0.05365081644 to new time 0.05868741866 with dt = 0.005036602218

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 39.27364518
MLMG: Initial rhs               = 39.27364518
MLMG: Initial residual (resid0) = 39.27364518
MLMG: Final Iter. 11 resid, resid/bnorm = 3.639152888e-11, 9.266144947e-13
MLMG: Timers: Solve = 0.008033847 Iter = 0.007820278 Bottom = 0.006774648
 >> After projection
  * On level 0 max(abs(diveu)) = 5.032452389e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 31.35815867  1.406563792  0.9201209009
   max(abs(gpx/gpy/gpz))  = 1465.706394  217.8933493  179.7221314
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.97124236  1.182819347  1.2028124
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.005036602218
done. 
   Time per fluid step      0.030799893
   Time per 1 particle steps 0.000238047
   Coupling time per step   0.003006039
Sum tracer volume wgt = 160.4725519 141.6260687
   Time per step        0.035205675

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

   Step 10: from old_time 0.05868741866 to new time 0.063647095 with dt = 0.004959676334

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
On level 0 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 38.42045019
MLMG: Initial rhs               = 38.42045019
MLMG: Initial residual (resid0) = 38.42045019
MLMG: Final Iter. 11 resid, resid/bnorm = 3.549779985e-11, 9.239298258e-13
MLMG: Timers: Solve = 0.008068523 Iter = 0.007829443 Bottom = 0.006770868
 >> After projection
  * On level 0 max(abs(diveu)) = 4.815456732e-11
On level 0 fillpatch none
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 31.71000727  1.343760511  0.9051258287
   max(abs(gpx/gpy/gpz))  = 1466.605723  218.5613903  180.0542151
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0 fillpatch vel
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 30.46023494  1.135052905  1.231448948
On level 0: set velocity bcs
On level 0: set temperature bcs
Evolving particles on level: 0 ... with fluid dt 0.004959676334
done. 
   Time per fluid step      0.030579212
   Time per 1 particle steps 0.000148301
   Coupling time per step   0.002738017
Sum tracer volume wgt = 159.7562848 141.6192527
   Time per step        0.034569118
  Writing plotfile TracerAdv-Godunov_plt00010 at time 0.063647095
Time spent in main (after init) 0.358371163
Time spent in main      0.545063053

Total GPU global memory (MB) spread across MPI: [7784 ... 7784]
Free  GPU global memory (MB) spread across MPI: [6436 ... 6436]
[The         Arena] max space (MB) allocated spread across MPI: [97 ... 97]
[The         Arena] max space (MB) used      spread across MPI: [82 ... 82]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [0 ... 0]
AMReX (26.10-97-gf5d545d2f0b0) finalized