Initializing AMReX (26.11-20-g24aedb0e61d7)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
Initializing CUDA...
CUDA initialized with 1 device.
AMReX (26.11-20-g24aedb0e61d7) initialized
   MFIX git describe: 26.11-21-ge4048e5d7789
AMReX-Hydro git hash: 154572aa6cf22c35a69729c74a0276909b96d5e3
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Particle-particle conduction is disabled.
Particle-fluid-particle conduction is disabled.

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building box geometry.
 
Now making the ebfactories ...
Done making the eb levels ...
 

On level 0 updated BC areas:
Reading particles from particle_input.dat ...
Time spent in initializing particles 0.003847072


****************************************
  Coverage report:  Grids        Cells
          regular:      0          896
          covered:      0            0
              cut:      1          104
****************************************

Bounding box for levelset imposed walls (EB box geometry):
   Lo: 1e-15  1e-15  1e-15
   Hi: 0.0015  0.0015  0.0015
Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  full-domain                      0                 0                 0
  sub-domain                       0                 0                 0
  ----------------  ----------------  ----------------  ----------------
  Total                            0                 0                 0
  ****************  ****************  ****************  ****************
Setting original sum_vol to 2.585743414e-09
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  0  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.6216615021 1
After  projection:
   max(abs(u/v/w))  = 0  0  0
Doing initial pressure iterations with dt = 2.2e-05

In initial_iterations: iter = 0
Before projection:
   max(abs(u/v/w))  = 0.2835576744  0.2996442204  0.3419781179
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.6216615021 1
After  projection:
   max(abs(u/v/w))  = 0.2346838864  0.2219878753  0.2241066622

In initial_iterations: iter = 1
Before projection:
   max(abs(u/v/w))  = 0.253256083  0.2620843159  0.2912133941
   max(abs(gpx/gpy/gpz))  = 6306.651837  5223.090996  5357.793444
Min and Max of epf 0.6216615021 1
After  projection:
   max(abs(u/v/w))  = 0.2304790508  0.218528439  0.2125554949

In initial_iterations: iter = 2
Before projection:
   max(abs(u/v/w))  = 0.2398741089  0.2411901866  0.2575777801
   max(abs(gpx/gpy/gpz))  = 10043.14909  8179.970717  8933.152499
Min and Max of epf 0.6216615021 1
After  projection:
   max(abs(u/v/w))  = 0.2275920475  0.2151407759  0.2027700346
Enclosed domain volume is   2.585743414e-09
Time spent in init      0.244666925

  Writing plotfile BENCH02-Size0001-walls-Godunov_plt00000 at time 0

 ============   NEW TIME STEP   ============ 

   Step 1: from old_time 0 to new time 2.2e-05 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4450536779  0.3760569623  0.4856250321
   max(abs(gpx/gpy/gpz))  = 12391.7649  10012.89277  11424.41366
Min and Max of epf 0.6216615021 1
After  projection:
   max(abs(u/v/w))  = 0.2473799457  0.2470492354  0.2874761296
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063887104
   Time per 40 particle steps 0.005872397
   Coupling time per step   0.003000093
   Time per step        0.073590559

 ============   NEW TIME STEP   ============ 

   Step 2: from old_time 2.2e-05 to new time 4.4e-05 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.557258889  0.4590107087  0.4114559698
   max(abs(gpx/gpy/gpz))  = 10425.07721  8433.952689  9006.768297
Min and Max of epf 0.6168240933 1
After  projection:
   max(abs(u/v/w))  = 0.3363898312  0.3265006685  0.3283729246
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.06229518
   Time per 40 particle steps 0.006201478
   Coupling time per step   0.001884262
   Time per step        0.071204976

 ============   NEW TIME STEP   ============ 

   Step 3: from old_time 4.4e-05 to new time 6.6e-05 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.6197322732  0.4783148093  0.410696322
   max(abs(gpx/gpy/gpz))  = 11212.64047  7962.795817  8317.530015
Min and Max of epf 0.6090006295 1
After  projection:
   max(abs(u/v/w))  = 0.3593727923  0.3457190143  0.4258679811
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062171326
   Time per 40 particle steps 0.006367107
   Coupling time per step   0.001873386
   Time per step        0.071206097

 ============   NEW TIME STEP   ============ 

   Step 4: from old_time 6.6e-05 to new time 8.8e-05 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.5231115247  0.4047559616  0.4489910369
   max(abs(gpx/gpy/gpz))  = 11926.02347  7335.341415  7607.528089
Min and Max of epf 0.5921075627 1
After  projection:
   max(abs(u/v/w))  = 0.3760364011  0.3084542813  0.4553112735
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062636178
   Time per 40 particle steps 0.006370098
   Coupling time per step   0.001845954
   Time per step        0.071643483

 ============   NEW TIME STEP   ============ 

   Step 5: from old_time 8.8e-05 to new time 0.00011 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.39960065  0.3808614292  0.3884300955
   max(abs(gpx/gpy/gpz))  = 9928.107422  6890.789021  7932.222907
Min and Max of epf 0.5982597792 1
After  projection:
   max(abs(u/v/w))  = 0.359460657  0.3236480501  0.4068443716
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063256513
   Time per 40 particle steps 0.006570186
   Coupling time per step   0.00189208
   Time per step        0.072507722

 ============   NEW TIME STEP   ============ 

   Step 6: from old_time 0.00011 to new time 0.000132 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3982589688  0.4026893729  0.3797926439
   max(abs(gpx/gpy/gpz))  = 9923.196978  6800.706718  9124.492696
Min and Max of epf 0.6126533999 0.9992669853
After  projection:
   max(abs(u/v/w))  = 0.3459108076  0.3318115523  0.3297681252
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063229728
   Time per 40 particle steps 0.006619345
   Coupling time per step   0.001867687
   Time per step        0.072532528

 ============   NEW TIME STEP   ============ 

   Step 7: from old_time 0.000132 to new time 0.000154 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4602215179  0.3803167757  0.3824565435
   max(abs(gpx/gpy/gpz))  = 12233.39708  6990.313212  10549.24191
Min and Max of epf 0.6136335686 1
After  projection:
   max(abs(u/v/w))  = 0.4184211943  0.3293477165  0.3175689613
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063551003
   Time per 40 particle steps 0.006578004
   Coupling time per step   0.001865046
   Time per step        0.072797748

 ============   NEW TIME STEP   ============ 

   Step 8: from old_time 0.000154 to new time 0.000176 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.483551357  0.3969746676  0.4062537642
   max(abs(gpx/gpy/gpz))  = 13222.42589  8109.421512  11987.40941
Min and Max of epf 0.6159757944 1
After  projection:
   max(abs(u/v/w))  = 0.4365584387  0.3474622491  0.3139724113
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062933615
   Time per 40 particle steps 0.00634427
   Coupling time per step   0.001880461
   Time per step        0.071964893

 ============   NEW TIME STEP   ============ 

   Step 9: from old_time 0.000176 to new time 0.000198 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4650033017  0.4446752885  0.3976150642
   max(abs(gpx/gpy/gpz))  = 10242.13555  10355.59722  13448.51277
Min and Max of epf 0.6080594288 1
After  projection:
   max(abs(u/v/w))  = 0.4234558583  0.3717346952  0.3315452416
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062348271
   Time per 40 particle steps 0.006457092
   Coupling time per step   0.001898857
   Time per step        0.071474498

 ============   NEW TIME STEP   ============ 

   Step 10: from old_time 0.000198 to new time 0.00022 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4086051652  0.3776797296  0.3837687709
   max(abs(gpx/gpy/gpz))  = 7794.516679  11915.36569  13339.98183
Min and Max of epf 0.6124695398 1
After  projection:
   max(abs(u/v/w))  = 0.3597930449  0.3341037446  0.3363444846
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062409126
   Time per 40 particle steps 0.006465062
   Coupling time per step   0.001876144
   Time per step        0.071549461

 ============   NEW TIME STEP   ============ 

   Step 11: from old_time 0.00022 to new time 0.000242 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.428290053  0.3638443296  0.3959269337
   max(abs(gpx/gpy/gpz))  = 6214.017204  10322.33222  10589.22219
Min and Max of epf 0.616288255 1
After  projection:
   max(abs(u/v/w))  = 0.3587708911  0.336857823  0.3316664743
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062453121
   Time per 40 particle steps 0.006415556
   Coupling time per step   0.001865
   Time per step        0.071533001

 ============   NEW TIME STEP   ============ 

   Step 12: from old_time 0.000242 to new time 0.000264 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4334873967  0.3980760999  0.380044689
   max(abs(gpx/gpy/gpz))  = 7802.642157  9020.627037  9383.338197
Min and Max of epf 0.6214508189 1
After  projection:
   max(abs(u/v/w))  = 0.377326973  0.3550749361  0.3195661803
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062718029
   Time per 40 particle steps 0.006414183
   Coupling time per step   0.001849724
   Time per step        0.071765798

 ============   NEW TIME STEP   ============ 

   Step 13: from old_time 0.000264 to new time 0.000286 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.521457026  0.4185348536  0.4411882076
   max(abs(gpx/gpy/gpz))  = 9472.121758  7236.103964  10006.59445
Min and Max of epf 0.6285056118 1
After  projection:
   max(abs(u/v/w))  = 0.4614785287  0.3731071585  0.3288960896
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063667363
   Time per 40 particle steps 0.006709565
   Coupling time per step   0.001870916
   Time per step        0.073050145

 ============   NEW TIME STEP   ============ 

   Step 14: from old_time 0.000286 to new time 0.000308 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.5984845323  0.4397422844  0.4415044699
   max(abs(gpx/gpy/gpz))  = 9225.092548  7112.502657  11283.44942
Min and Max of epf 0.5490947495 1
After  projection:
   max(abs(u/v/w))  = 0.5303678446  0.3739431159  0.3388384119
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064081718
   Time per 40 particle steps 0.006501716
   Coupling time per step   0.001866614
   Time per step        0.073246097

 ============   NEW TIME STEP   ============ 

   Step 15: from old_time 0.000308 to new time 0.00033 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.5656389149  0.4965404155  0.5455395316
   max(abs(gpx/gpy/gpz))  = 10366.14294  8380.246334  8605.343514
Min and Max of epf 0.4504126535 1
After  projection:
   max(abs(u/v/w))  = 0.5011207936  0.3779547641  0.3066105178
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063786798
   Time per 40 particle steps 0.006323606
   Coupling time per step   0.001870859
   Time per step        0.072783819

 ============   NEW TIME STEP   ============ 

   Step 16: from old_time 0.00033 to new time 0.000352 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4998275446  0.4617035086  0.3377684163
   max(abs(gpx/gpy/gpz))  = 12705.52383  9298.05792  9814.034256
Min and Max of epf 0.4489958974 1
After  projection:
   max(abs(u/v/w))  = 0.4412427966  0.3374528058  0.2990080487
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063875504
   Time per 40 particle steps 0.006400352
   Coupling time per step   0.001869936
   Time per step        0.072937521

 ============   NEW TIME STEP   ============ 

   Step 17: from old_time 0.000352 to new time 0.000374 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4079701725  0.3891958706  0.3829498774
   max(abs(gpx/gpy/gpz))  = 7733.834487  9455.683101  8853.587123
Min and Max of epf 0.6080138292 1
After  projection:
   max(abs(u/v/w))  = 0.3811552252  0.2976809308  0.3012891267
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064371527
   Time per 40 particle steps 0.006274695
   Coupling time per step   0.001879559
   Time per step        0.073386529

 ============   NEW TIME STEP   ============ 

   Step 18: from old_time 0.000374 to new time 0.0003948856052 with dt = 2.08856052e-05

Before projection:
   max(abs(u/v/w))  = 0.508558544  0.3146673664  0.3716959396
   max(abs(gpx/gpy/gpz))  = 7150.823529  6755.203697  7730.42494
Min and Max of epf 0.4193378184 1
After  projection:
   max(abs(u/v/w))  = 0.3528081123  0.2773577777  0.28739888
Evolving particles on level: 0 ... with fluid dt 2.08856052e-05
done. 
   Time per fluid step      0.064829274
   Time per 38 particle steps 0.006188474
   Coupling time per step   0.00185341
   Time per step        0.07367745

 ============   NEW TIME STEP   ============ 

   Step 19: from old_time 0.0003948856052 to new time 0.0004168856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.6597231228  0.3383505715  0.418175084
   max(abs(gpx/gpy/gpz))  = 13278.88361  6464.530504  7541.694846
Min and Max of epf 0.4711487641 1
After  projection:
   max(abs(u/v/w))  = 0.3311688502  0.2602709682  0.263459971
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064671701
   Time per 40 particle steps 0.006353954
   Coupling time per step   0.001848007
   Time per step        0.073654387

 ============   NEW TIME STEP   ============ 

   Step 20: from old_time 0.0004168856052 to new time 0.0004388856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.5577527788  0.3682329847  0.3809303629
   max(abs(gpx/gpy/gpz))  = 15583.67678  6495.984983  7579.753198
Min and Max of epf 0.5033315501 1
After  projection:
   max(abs(u/v/w))  = 0.3121793259  0.2735874772  0.2580536642
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064587796
   Time per 40 particle steps 0.006247238
   Coupling time per step   0.001883159
   Time per step        0.073512772

 ============   NEW TIME STEP   ============ 

   Step 21: from old_time 0.0004388856052 to new time 0.0004608856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3730957926  0.346087239  0.4420549801
   max(abs(gpx/gpy/gpz))  = 12661.45521  7999.58492  8614.303135
Min and Max of epf 0.5183311914 1
After  projection:
   max(abs(u/v/w))  = 0.3004328391  0.3160208732  0.2746074975
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064913224
   Time per 40 particle steps 0.006083213
   Coupling time per step   0.001947716
   Time per step        0.073707273

 ============   NEW TIME STEP   ============ 

   Step 22: from old_time 0.0004608856052 to new time 0.0004828856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3760012179  0.3766828602  0.5501493483
   max(abs(gpx/gpy/gpz))  = 6350.905546  7145.865405  9326.049231
Min and Max of epf 0.4587090572 1
After  projection:
   max(abs(u/v/w))  = 0.2846086657  0.3409056255  0.282021508
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064311536
   Time per 40 particle steps 0.006166228
   Coupling time per step   0.001850615
   Time per step        0.0731295

 ============   NEW TIME STEP   ============ 

   Step 23: from old_time 0.0004828856052 to new time 0.0005048856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4018099271  0.3273588175  0.5800129678
   max(abs(gpx/gpy/gpz))  = 6465.687194  5526.239593  14160.61958
Min and Max of epf 0.5238317975 1
After  projection:
   max(abs(u/v/w))  = 0.2756533259  0.2918884095  0.3298291774
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064441616
   Time per 40 particle steps 0.006777698
   Coupling time per step   0.001866183
   Time per step        0.073886478

 ============   NEW TIME STEP   ============ 

   Step 24: from old_time 0.0005048856052 to new time 0.0005268856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4178486824  0.3112066127  0.5830371155
   max(abs(gpx/gpy/gpz))  = 6821.174548  7074.922938  14711.81641
Min and Max of epf 0.5167880376 1
After  projection:
   max(abs(u/v/w))  = 0.2771458607  0.2648026794  0.40915305
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063638741
   Time per 40 particle steps 0.006574821
   Coupling time per step   0.001858808
   Time per step        0.072854382

 ============   NEW TIME STEP   ============ 

   Step 25: from old_time 0.0005268856052 to new time 0.0005488856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4444390157  0.3099982813  0.5903907326
   max(abs(gpx/gpy/gpz))  = 6924.355521  8498.879407  13145.30554
Min and Max of epf 0.517867882 1
After  projection:
   max(abs(u/v/w))  = 0.3081594413  0.2708154201  0.414219751
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.065763257
   Time per 40 particle steps 0.006054317
   Coupling time per step   0.001848855
   Time per step        0.074488456

 ============   NEW TIME STEP   ============ 

   Step 26: from old_time 0.0005488856052 to new time 0.0005708856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4439733703  0.3019264281  0.5572387327
   max(abs(gpx/gpy/gpz))  = 7061.341374  8319.911518  10022.10471
Min and Max of epf 0.5437581945 1
After  projection:
   max(abs(u/v/w))  = 0.3122358396  0.2774388516  0.3749739732
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.065596637
   Time per 40 particle steps 0.005987297
   Coupling time per step   0.0018389
   Time per step        0.074219917

 ============   NEW TIME STEP   ============ 

   Step 27: from old_time 0.0005708856052 to new time 0.0005928856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4705923315  0.3502936503  0.5182901661
   max(abs(gpx/gpy/gpz))  = 7380.217483  7897.911767  9461.097382
Min and Max of epf 0.5813660421 1
After  projection:
   max(abs(u/v/w))  = 0.3050712984  0.2762385639  0.337680077
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.065649163
   Time per 40 particle steps 0.006166694
   Coupling time per step   0.001864207
   Time per step        0.074475826

 ============   NEW TIME STEP   ============ 

   Step 28: from old_time 0.0005928856052 to new time 0.0006148856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.6128462494  0.405335617  0.4800066902
   max(abs(gpx/gpy/gpz))  = 10128.31856  8356.516579  9748.632416
Min and Max of epf 0.5931627128 1
After  projection:
   max(abs(u/v/w))  = 0.2956126129  0.2982285664  0.3081234104
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.065416802
   Time per 40 particle steps 0.006162285
   Coupling time per step   0.001905247
   Time per step        0.074318585

 ============   NEW TIME STEP   ============ 

   Step 29: from old_time 0.0006148856052 to new time 0.0006368856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.7727039079  0.4236870829  0.4257601904
   max(abs(gpx/gpy/gpz))  = 12826.25612  7522.178692  9590.469752
Min and Max of epf 0.540207861 1
After  projection:
   max(abs(u/v/w))  = 0.287220025  0.3121828363  0.3131959971
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.065273485
   Time per 40 particle steps 0.006100638
   Coupling time per step   0.001881478
   Time per step        0.074056802

 ============   NEW TIME STEP   ============ 

   Step 30: from old_time 0.0006368856052 to new time 0.0006588856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.8941322141  0.411873054  0.4165110474
   max(abs(gpx/gpy/gpz))  = 16019.01176  6488.039951  9609.977804
Min and Max of epf 0.4895316805 1
After  projection:
   max(abs(u/v/w))  = 0.2999538647  0.3090252236  0.3676952884
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063915119
   Time per 40 particle steps 0.006017241
   Coupling time per step   0.001869274
   Time per step        0.072597287

 ============   NEW TIME STEP   ============ 

   Step 31: from old_time 0.0006588856052 to new time 0.0006808856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3794612624  0.4033513895  0.4948292582
   max(abs(gpx/gpy/gpz))  = 16847.74744  6108.164699  11171.90788
Min and Max of epf 0.5136137169 1
After  projection:
   max(abs(u/v/w))  = 0.255295496  0.3041933173  0.4075716681
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063964405
   Time per 40 particle steps 0.006227518
   Coupling time per step   0.001897435
   Time per step        0.072853516

 ============   NEW TIME STEP   ============ 

   Step 32: from old_time 0.0006808856052 to new time 0.0007028856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3352047359  0.4124625513  0.6820163847
   max(abs(gpx/gpy/gpz))  = 7058.343712  6494.146045  11054.25078
Min and Max of epf 0.5617332082 1
After  projection:
   max(abs(u/v/w))  = 0.2629101909  0.2937892078  0.2859118811
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063662576
   Time per 40 particle steps 0.006377868
   Coupling time per step   0.00188742
   Time per step        0.072732537

 ============   NEW TIME STEP   ============ 

   Step 33: from old_time 0.0007028856052 to new time 0.0007248856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3084237221  0.3009457751  0.6371196593
   max(abs(gpx/gpy/gpz))  = 9144.770972  6939.826182  11875.12642
Min and Max of epf 0.5544518303 1
After  projection:
   max(abs(u/v/w))  = 0.2461675511  0.2705733992  0.2783799914
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063387078
   Time per 40 particle steps 0.006295374
   Coupling time per step   0.001866609
   Time per step        0.072351615

 ============   NEW TIME STEP   ============ 

   Step 34: from old_time 0.0007248856052 to new time 0.0007468856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.2724469389  0.3050671942  0.4322189223
   max(abs(gpx/gpy/gpz))  = 9811.470826  6956.309064  11621.59131
Min and Max of epf 0.5583086025 1
After  projection:
   max(abs(u/v/w))  = 0.2420066318  0.2777395918  0.2965192025
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063572887
   Time per 40 particle steps 0.00596992
   Coupling time per step   0.00184121
   Time per step        0.072208237

 ============   NEW TIME STEP   ============ 

   Step 35: from old_time 0.0007468856052 to new time 0.0007688856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3040563013  0.3025429914  0.3432453396
   max(abs(gpx/gpy/gpz))  = 9009.314738  6298.676128  8425.105949
Min and Max of epf 0.5658797839 1
After  projection:
   max(abs(u/v/w))  = 0.244600136  0.2793103451  0.2978988468
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063487522
   Time per 40 particle steps 0.006182455
   Coupling time per step   0.001871457
   Time per step        0.072311108

 ============   NEW TIME STEP   ============ 

   Step 36: from old_time 0.0007688856052 to new time 0.0007908856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3445629448  0.3291117562  0.3280084363
   max(abs(gpx/gpy/gpz))  = 7482.934435  6343.783988  7156.194436
Min and Max of epf 0.5433294475 1
After  projection:
   max(abs(u/v/w))  = 0.2471812395  0.2762243344  0.2786107916
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064900906
   Time per 40 particle steps 0.006367222
   Coupling time per step   0.001837904
   Time per step        0.073936185

 ============   NEW TIME STEP   ============ 

   Step 37: from old_time 0.0007908856052 to new time 0.0008128856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3330575778  0.289015449  0.3538059258
   max(abs(gpx/gpy/gpz))  = 5474.192556  7917.664379  7830.560285
Min and Max of epf 0.4720235385 1
After  projection:
   max(abs(u/v/w))  = 0.2507140959  0.276960022  0.2976613738
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063131832
   Time per 40 particle steps 0.00637318
   Coupling time per step   0.001852236
   Time per step        0.072172265

 ============   NEW TIME STEP   ============ 

   Step 38: from old_time 0.0008128856052 to new time 0.0008348856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4247985366  0.2789117307  0.3459459979
   max(abs(gpx/gpy/gpz))  = 5835.520491  7121.430223  6927.387903
Min and Max of epf 0.4770177141 1
After  projection:
   max(abs(u/v/w))  = 0.2753432466  0.2812257476  0.3022569154
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063951225
   Time per 40 particle steps 0.006122121
   Coupling time per step   0.001837036
   Time per step        0.072689765

 ============   NEW TIME STEP   ============ 

   Step 39: from old_time 0.0008348856052 to new time 0.0008568856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4422468925  0.3244371672  0.342096319
   max(abs(gpx/gpy/gpz))  = 6793.422272  6612.829631  6735.208735
Min and Max of epf 0.5334208747 1
After  projection:
   max(abs(u/v/w))  = 0.2816114155  0.2994995761  0.2824468016
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.065540758
   Time per 40 particle steps 0.005975218
   Coupling time per step   0.001837325
   Time per step        0.074155352

 ============   NEW TIME STEP   ============ 

   Step 40: from old_time 0.0008568856052 to new time 0.0008788856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.4246385089  0.3654398829  0.3719122512
   max(abs(gpx/gpy/gpz))  = 7301.612594  6613.431877  7016.553364
Min and Max of epf 0.5676799891 1
After  projection:
   max(abs(u/v/w))  = 0.2709021272  0.319998958  0.2906133437
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.06543674
   Time per 40 particle steps 0.005909073
   Coupling time per step   0.001857478
   Time per step        0.073964777

 ============   NEW TIME STEP   ============ 

   Step 41: from old_time 0.0008788856052 to new time 0.0009008856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.390743365  0.3390019493  0.3772604757
   max(abs(gpx/gpy/gpz))  = 6988.017351  6521.357165  7043.326919
Min and Max of epf 0.5736854808 1
After  projection:
   max(abs(u/v/w))  = 0.2691200341  0.3403556138  0.2870210255
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062947702
   Time per 40 particle steps 0.006022428
   Coupling time per step   0.001861047
   Time per step        0.071628214

 ============   NEW TIME STEP   ============ 

   Step 42: from old_time 0.0009008856052 to new time 0.0009228856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3800825096  0.3457175827  0.3777227583
   max(abs(gpx/gpy/gpz))  = 7107.778091  6151.893058  7147.673752
Min and Max of epf 0.5798483398 1
After  projection:
   max(abs(u/v/w))  = 0.291873116  0.3641180227  0.2759447056
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063102295
   Time per 40 particle steps 0.006211878
   Coupling time per step   0.001864217
   Time per step        0.071971782

 ============   NEW TIME STEP   ============ 

   Step 43: from old_time 0.0009228856052 to new time 0.0009448856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.382531081  0.3745080385  0.3938630242
   max(abs(gpx/gpy/gpz))  = 6968.298459  6065.756762  6686.58069
Min and Max of epf 0.5855267974 1
After  projection:
   max(abs(u/v/w))  = 0.2957221519  0.3907855335  0.2751468756
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.062508739
   Time per 40 particle steps 0.006117853
   Coupling time per step   0.001897552
   Time per step        0.071344071

 ============   NEW TIME STEP   ============ 

   Step 44: from old_time 0.0009448856052 to new time 0.0009668856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3646398658  0.3969500411  0.3721437174
   max(abs(gpx/gpy/gpz))  = 7003.592497  4782.805204  5823.497497
Min and Max of epf 0.5753902207 1
After  projection:
   max(abs(u/v/w))  = 0.2927755275  0.4049429965  0.2543569357
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063318459
   Time per 40 particle steps 0.006184224
   Coupling time per step   0.001847418
   Time per step        0.072132322

 ============   NEW TIME STEP   ============ 

   Step 45: from old_time 0.0009668856052 to new time 0.0009888856052 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.33877127  0.4073580535  0.3286588767
   max(abs(gpx/gpy/gpz))  = 6057.096281  4506.556623  5885.095993
Min and Max of epf 0.5335468634 0.9991487188
After  projection:
   max(abs(u/v/w))  = 0.2795768634  0.4122843587  0.2393276787
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063877836
   Time per 40 particle steps 0.006041387
   Coupling time per step   0.001870479
   Time per step        0.072573174

 ============   NEW TIME STEP   ============ 

   Step 46: from old_time 0.0009888856052 to new time 0.001010885605 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.3521781136  0.3998957766  0.3091025293
   max(abs(gpx/gpy/gpz))  = 4954.22543  4831.339528  5371.825093
Min and Max of epf 0.4933739607 0.9982678597
After  projection:
   max(abs(u/v/w))  = 0.2553459687  0.4059448461  0.2212214454
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063676972
   Time per 40 particle steps 0.00611491
   Coupling time per step   0.001883709
   Time per step        0.072491419

 ============   NEW TIME STEP   ============ 

   Step 47: from old_time 0.001010885605 to new time 0.001032885605 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.2982925986  0.3860297698  0.3137271831
   max(abs(gpx/gpy/gpz))  = 4668.589668  5689.970962  5684.933948
Min and Max of epf 0.45685612 0.9972288374
After  projection:
   max(abs(u/v/w))  = 0.2275678942  0.3971367449  0.2337059491
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064406464
   Time per 40 particle steps 0.006361632
   Coupling time per step   0.001884744
   Time per step        0.07347441

 ============   NEW TIME STEP   ============ 

   Step 48: from old_time 0.001032885605 to new time 0.001054885605 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.2725544393  0.3677070025  0.3016800107
   max(abs(gpx/gpy/gpz))  = 4650.553946  5338.722778  6473.968043
Min and Max of epf 0.4527568053 0.9985255308
After  projection:
   max(abs(u/v/w))  = 0.2145760744  0.3795764573  0.2321369526
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064115522
   Time per 40 particle steps 0.006266838
   Coupling time per step   0.001885993
   Time per step        0.073059424

 ============   NEW TIME STEP   ============ 

   Step 49: from old_time 0.001054885605 to new time 0.001076885605 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.2229242138  0.344757686  0.2764655317
   max(abs(gpx/gpy/gpz))  = 4617.001092  4298.644875  6693.404929
Min and Max of epf 0.4718961415 0.9997751431
After  projection:
   max(abs(u/v/w))  = 0.2040152826  0.3414989231  0.2267750733
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.064126959
   Time per 40 particle steps 0.005901439
   Coupling time per step   0.001909064
   Time per step        0.072732671

 ============   NEW TIME STEP   ============ 

   Step 50: from old_time 0.001076885605 to new time 0.001098885605 with dt = 2.2e-05

Before projection:
   max(abs(u/v/w))  = 0.2488729388  0.3191186677  0.2604440054
   max(abs(gpx/gpy/gpz))  = 4684.761941  4025.291397  5286.786919
Min and Max of epf 0.4911995385 1
After  projection:
   max(abs(u/v/w))  = 0.2002034391  0.306542077  0.2347863089
Evolving particles on level: 0 ... with fluid dt 2.2e-05
done. 
   Time per fluid step      0.063621749
   Time per 40 particle steps 0.005836894
   Coupling time per step   0.001870436
   Time per step        0.072106733
  Writing plotfile BENCH02-Size0001-walls-Godunov_plt00050 at time 0.001098885605
Time spent in main (after init) 3.651727687
Time spent in main      3.896394612

Total GPU global memory (MB) spread across MPI: [7784 ... 7784]
Free  GPU global memory (MB) spread across MPI: [6498 ... 6498]
[The         Arena] max space (MB) allocated spread across MPI: [33 ... 33]
[The         Arena] max space (MB) used      spread across MPI: [29 ... 29]
[The Managed Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The Managed Arena] max space (MB) used      spread across MPI: [0 ... 0]
[The  Pinned Arena] max space (MB) allocated spread across MPI: [8 ... 8]
[The  Pinned Arena] max space (MB) used      spread across MPI: [0 ... 0]
AMReX (26.11-20-g24aedb0e61d7) finalized
