[main]
testTopDir     = /home/regtester/RegTesting/rt-incflo/
webTopDir      = /home/regtester/RegTesting/rt-incflo/web

useCmake = 0

sourceTree = C_Src

# suiteName is the name prepended to all output directories
suiteName = incflo-GPU

COMP = g++
FCOMP = gfortran
add_to_c_make_command = TEST=TRUE USE_ASSERTION=TRUE USE_CUDA=TRUE

purge_output = 1

MAKE = make
numMakeJobs = 8

# MPIcommand should use the placeholders:
#   @host@ to indicate where to put the hostname to run on
#   @nprocs@ to indicate where to put the number of processors
#   @command@ to indicate where to put the command to run
#
# only tests with useMPI = 1 will run in parallel
# nprocs is problem dependent and specified in the individual problem
# sections.

#MPIcommand = mpiexec -host @host@ -n @nprocs@ @command@
MPIcommand = mpiexec -n @nprocs@ @command@ amrex.the_arena_init_size=0
MPIhost = 

reportActiveTestsOnly = 1

# Add "GO UP" link at the top of the web page?
goUpLink = 1

# email
sendEmailWhenFail = 1
emailTo = asalmgren@lbl.gov cgilet@gmail.com
emailBody = Check https://ccse.lbl.gov/pub/GpuRegressionTesting/incflo/

[AMReX]
dir = /home/regtester/git/amrex
branch = development
#hash = cc850f3c226bf3601a5cdf64882ebcf9fc

[source]
dir = /home/regtester/git/incflo
branch = development
#branch = srd_for_diffusion
#hash = 574a41385cd9a98f85a76e082dbed879a759781

[extra-AMReX-Hydro]
dir = /home/regtester/git/AMReX-Hydro
branch = development
#branch = bc_fix2

# individual problems follow

[bouss_bubble_god]
buildDir = test_no_eb_3d
inputFile = benchmark.bouss_bubble_god
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =
tolerance= 1.e-10

[bouss_bubble_god_2d]
buildDir = test_no_eb_2d
inputFile = benchmark.bouss_bubble_god
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =
tolerance= 1.e-10

[bouss_bubble_plm]
buildDir = test_no_eb_3d
inputFile = benchmark.bouss_bubble_plm
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance= 1.e-10

[bouss_bubble_plm_2d]
buildDir = test_no_eb_2d
inputFile = benchmark.bouss_bubble_plm
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance= 1.e-10

[bouss_bubble_mol]
buildDir = test_no_eb_3d
inputFile = benchmark.bouss_bubble_mol
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =
tolerance= 1.e-10

[bouss_bubble_mol_2d]
buildDir = test_no_eb_2d
inputFile = benchmark.bouss_bubble_mol
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =
tolerance= 1.e-10

[double_shear_layer] 
buildDir = test_3d
inputFile = benchmark.double_shear_layer
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = stop_time=0.5 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 1.e-11

[double_shear_no_eb] 
buildDir = test_no_eb_3d
inputFile = benchmark.double_shear_layer_x
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = stop_time=0.5 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 2.e-11

[double_shear_no_eb_2d]
buildDir = test_no_eb_2d
inputFile = benchmark.double_shear_layer
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = stop_time=0.5 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 2.e-11

[double_shear_restart] 
buildDir = test_3d
inputFile = benchmark.double_shear_restart
target = incflo
dim = 3
restartTest = 1
restartFileNum = 10
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = 
tolerance = 1.e-12

[rt_no_eb]
buildDir = test_no_eb_3d
inputFile = benchmark.rayleigh_taylor
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =
tolerance= 1.e-10

[rt_no_eb_2d]
buildDir = test_no_eb_2d
inputFile = benchmark.rayleigh_taylor
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params =
tolerance= 1.e-10

[taylor_green_vortices] 
buildDir = test_3d
inputFile = benchmark.taylor_green_vortices
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0
tolerance = 5.e-12

[taylor_green_no_eb] 
buildDir = test_no_eb_3d
inputFile = benchmark.taylor_green_vortices
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0
tolerance = 5.e-12

[taylor_green_no_eb_2d] 
buildDir = test_no_eb_2d
inputFile = benchmark.taylor_green_vortices
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0
tolerance = 5.e-12

[couette] 
buildDir = test_3d
inputFile = benchmark.couette
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance = 1.e-12
abs_tolerance= 1.e-12

[couette_poiseuille] 
buildDir = test_3d
inputFile = benchmark.couette_poiseuille
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=1 amr.plt_tracer=1
tolerance = 1.e-12
abs_tolerance= 1.e-12

[lid_driven_cavity] 
buildDir = test_3d
inputFile = benchmark.lid_driven_cavity
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = max_step=30 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0 amr.plt_rho=1 amr.plt_tracer=1 amr.max_grid_size=32
tolerance = 1.e-10

[lid_driven_cavity_2d] 
buildDir = test_2d
inputFile = benchmark.lid_driven_cavity
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = max_step=30 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 1.e-10

[poiseuille_halfplane] 
buildDir = test_3d
inputFile = benchmark.poiseuille_halfplane_newtonian
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=0 amr.plt_gpz=0
tolerance = 1.e-12

[poiseuille_plane_newtonian] 
buildDir = test_3d
inputFile = benchmark.poiseuille_plane_newtonian
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=0 amr.plt_gpz=0
tolerance = 1.e-12

[poiseuille_plane_bingham] 
buildDir = test_3d
inputFile = benchmark.poiseuille_plane_bingham
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.3 amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=0 amr.plt_gpz=0
tolerance = 1.e-12

[poiseuille_cylinder_newtonian] 
buildDir = test_3d
inputFile = benchmark.poiseuille_cylinder_newtonian
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=30 amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=0 amr.plt_gpz=0

tolerance = 1.e-10

[poiseuille_cylinder_bingham] 
buildDir = test_3d
inputFile = benchmark.poiseuille_cylinder_bingham
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=0 amr.plt_gpz=0 amr.plt_vort=0 amr.plt_vfrac=0
tolerance = 1.e-12

[uniform_velocity_sphere]
buildDir = test_3d
inputFile = benchmark.uniform_velocity_sphere
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0
tolerance = 6.e-9

[uniform_velocity_sphere_2d]
buildDir = test_2d
inputFile = benchmark.uniform_velocity_sphere
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0
tolerance = 1.e-9

[channel_cylinder-x]
buildDir = test_3d
inputFile = benchmark.channel_cylinder-x
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 1.e-10

[channel_cylinder-y]
buildDir = test_3d
inputFile = benchmark.channel_cylinder-y
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=1 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=1 amr.plt_gpz=1 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 1.e-10

[channel_cylinder-z]
buildDir = test_3d
inputFile = benchmark.channel_cylinder-z
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=1 amr.plt_gpy=0 amr.plt_gpz=1 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 1.e-10

[channel_cylinder_2d]
buildDir = test_2d
inputFile = benchmark.channel_cylinder
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_rho=1 amr.plt_tracer=1
tolerance = 6.e-10

[channel_cylinder-x-MOL]
buildDir = test_3d
inputFile = benchmark.channel_cylinder-x
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_velz=0 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_gpz=0 amr.plt_rho=1 amr.plt_tracer=1 incflo.advection_type="MOL"
tolerance = 1.e-10

[channel_cylinder-y-MOL]
buildDir = test_3d
inputFile = benchmark.channel_cylinder-y
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=0 amr.plt_vely=1 amr.plt_velz=1 amr.plt_gpx=0 amr.plt_gpy=1 amr.plt_gpz=1 amr.plt_rho=1 amr.plt_tracer=1 incflo.advection_type="MOL"
tolerance = 1.e-10

[channel_cylinder-z-MOL]
buildDir = test_3d
inputFile = benchmark.channel_cylinder-z
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=0 amr.plt_velz=1 amr.plt_gpx=1 amr.plt_gpy=0 amr.plt_gpz=1 amr.plt_rho=1 amr.plt_tracer=1 incflo.advection_type="MOL"
tolerance = 1.e-10

[channel_cylinder_2d-MOL]
buildDir = test_2d
inputFile = benchmark.channel_cylinder
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = stop_time=0.025 amr.plt_ccse_regtest=0 amr.plt_velx=1 amr.plt_vely=1 amr.plt_gpx=1 amr.plt_gpy=1 amr.plt_rho=1 amr.plt_tracer=1 incflo.advection_type="MOL" incflo.cfl = 0.3
tolerance = 5.e-10

[channel_spherecube]
#tolerance = 1.e-12
buildDir = test_3d
inputFile = benchmark.channel_spherecube
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = amr.max_grid_size=32
tolerance = 2.5e-7

[BDS_tracer_advection_2d]
buildDir = test_2d
inputFile = benchmark.bds_tracer_advection
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=1
tolerance= 1.e-12

[BDS_tracer_advection]
buildDir = test_3d
inputFile = benchmark.bds_tracer_advection
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=1
tolerance= 1.e-12

[tracer_advection]
buildDir = test_3d
inputFile = benchmark.tracer_advection
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=1
tolerance= 1.e-12

[tracer_adv_diff] 
buildDir = test_3d
inputFile = benchmark.tracer_adv_diff
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
runtime_params = amr.plt_ccse_regtest=1
tolerance= 1.e-12

[tracer_adv_diff_cn] 
buildDir = test_3d
inputFile = benchmark.tracer_adv_diff_cn
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 1
compileTest = 0
doVis = 0
tolerance= 2.e-12

[eb_flowx_2d]
buildDir = test_2d
inputFile = benchmark.eb_flow_const_velx
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10 amr.plt_vely = 0 amr.plt_vort = 0
tolerance= 1.e-12
abs_tolerance= 1.e-10

[eb_flowy_2d]
buildDir = test_2d
inputFile = benchmark.eb_flow_const_vely
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
runtime_params = max_step=10 amr.plt_velx = 0 amr.plt_vort = 0
tolerance= 1.e-12
abs_tolerance= 1.e-10

[eb_splitDomain_2d]
buildDir = test_2d
inputFile = benchmark.split
target = incflo
dim = 2
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance= 1.e-11
abs_tolerance= 1.e-11

[u-pipe_3d]
buildDir = test_3d
inputFile = benchmark.upipe
target = incflo
dim = 3
restartTest = 0
useMPI = 1
numprocs = 4
compileTest = 0
doVis = 0
tolerance= 1.e-10
abs_tolerance= 5.e-10