Initializing AMReX (26.04-116-g6f2c4aff90ae)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.04-116-g6f2c4aff90ae) initialized Successfully read inputs file ... ERF git hash: d04f314d AMReX git hash: 26.04-116-g6f2c4aff90 Problem name (from inputs file) is: "Ekman Spiral" Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (7,5,399) (0,0,0)) ((8,0,0) (11,5,399) (0,0,0)) ((0,6,0) (7,9,399) (0,0,0)) ((8,6,0) (11,9,399) (0,0,0)) ) max of zphys_nd 5000 max of zlevels 5000 Problem name "ekman spiral" is not known, no state perturbations added. Problem name "ekman spiral" is not known, no velocity perturbations added. Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937246 Fixed dt at level 0 is: 0.5 smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.008 Writing native checkpoint EkmanSpiral_restart_chk00000 Checkpoint write time = 0.025521637 seconds. Writing native 3D plotfile EkmanSpiral_restart_plt00000 3DPlotfile write time = 0.029797453 seconds. TIME= 0 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937246 Fixed dt at level 0 is: 0.5 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.5 with dt = 0.5 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1666666666667 No-substepping time integration at level 0 to 0.1666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0 to 0.1666666666667 with dt = 0.1666666666667 using RHS created at 0 Making slow rhs at time 0.1666666666667 for fast variables advancing from 0 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.25 Time integration of scalars at level 0 from 0 to 0.25 with dt = 0.25 using RHS created at 0.1666666666667 Making slow rhs at time 0.25 for fast variables advancing from 0 to 0.5 No-substepping time integration at level 0 to 0.5 with dt = 0.5 Time integration of scalars at level 0 from 0 to 0.5 with dt = 0.5 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 48000 cells Coarse STEP 1 ends. TIME = 0.5 DT = 0.5 Timestep time = 0.066657389 seconds. TIME= 0.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.780993726 Fixed dt at level 0 is: 0.5 [Level 0 step 2] ADVANCE from elapsed time = 0.5 to 1 with dt = 0.5 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.6666666666667 No-substepping time integration at level 0 to 0.6666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 0.5 to 0.6666666666667 with dt = 0.1666666666667 using RHS created at 0.5 Making slow rhs at time 0.6666666666667 for fast variables advancing from 0.5 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.25 Time integration of scalars at level 0 from 0.5 to 0.75 with dt = 0.25 using RHS created at 0.6666666666667 Making slow rhs at time 0.75 for fast variables advancing from 0.5 to 1 No-substepping time integration at level 0 to 1 with dt = 0.5 Time integration of scalars at level 0 from 0.5 to 1 with dt = 0.5 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 48000 cells Coarse STEP 2 ends. TIME = 1 DT = 0.5 Timestep time = 0.066967584 seconds. TIME= 1 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519505 Anelastic dt at level 0 would be: 0.7809937273 Fixed dt at level 0 is: 0.5 [Level 0 step 3] ADVANCE from elapsed time = 1 to 1.5 with dt = 0.5 Making slow rhs at time 1 for fast variables advancing from 1 to 1.166666666667 No-substepping time integration at level 0 to 1.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1 to 1.166666666667 with dt = 0.1666666666667 using RHS created at 1 Making slow rhs at time 1.166666666667 for fast variables advancing from 1 to 1.25 No-substepping time integration at level 0 to 1.25 with dt = 0.25 Time integration of scalars at level 0 from 1 to 1.25 with dt = 0.25 using RHS created at 1.166666666667 Making slow rhs at time 1.25 for fast variables advancing from 1 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.5 Time integration of scalars at level 0 from 1 to 1.5 with dt = 0.5 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 48000 cells Coarse STEP 3 ends. TIME = 1.5 DT = 0.5 Timestep time = 0.06828674 seconds. TIME= 1.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.7809937287 Fixed dt at level 0 is: 0.5 [Level 0 step 4] ADVANCE from elapsed time = 1.5 to 2 with dt = 0.5 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.666666666667 No-substepping time integration at level 0 to 1.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 1.5 to 1.666666666667 with dt = 0.1666666666667 using RHS created at 1.5 Making slow rhs at time 1.666666666667 for fast variables advancing from 1.5 to 1.75 No-substepping time integration at level 0 to 1.75 with dt = 0.25 Time integration of scalars at level 0 from 1.5 to 1.75 with dt = 0.25 using RHS created at 1.666666666667 Making slow rhs at time 1.75 for fast variables advancing from 1.5 to 2 No-substepping time integration at level 0 to 2 with dt = 0.5 Time integration of scalars at level 0 from 1.5 to 2 with dt = 0.5 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 48000 cells Coarse STEP 4 ends. TIME = 2 DT = 0.5 Timestep time = 0.069297707 seconds. TIME= 2 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.78099373 Fixed dt at level 0 is: 0.5 [Level 0 step 5] ADVANCE from elapsed time = 2 to 2.5 with dt = 0.5 Making slow rhs at time 2 for fast variables advancing from 2 to 2.166666666667 No-substepping time integration at level 0 to 2.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2 to 2.166666666667 with dt = 0.1666666666667 using RHS created at 2 Making slow rhs at time 2.166666666667 for fast variables advancing from 2 to 2.25 No-substepping time integration at level 0 to 2.25 with dt = 0.25 Time integration of scalars at level 0 from 2 to 2.25 with dt = 0.25 using RHS created at 2.166666666667 Making slow rhs at time 2.25 for fast variables advancing from 2 to 2.5 No-substepping time integration at level 0 to 2.5 with dt = 0.5 Time integration of scalars at level 0 from 2 to 2.5 with dt = 0.5 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 48000 cells Coarse STEP 5 ends. TIME = 2.5 DT = 0.5 Timestep time = 0.067964594 seconds. TIME= 2.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519506 Anelastic dt at level 0 would be: 0.7809937314 Fixed dt at level 0 is: 0.5 [Level 0 step 6] ADVANCE from elapsed time = 2.5 to 3 with dt = 0.5 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.666666666667 No-substepping time integration at level 0 to 2.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 2.5 to 2.666666666667 with dt = 0.1666666666667 using RHS created at 2.5 Making slow rhs at time 2.666666666667 for fast variables advancing from 2.5 to 2.75 No-substepping time integration at level 0 to 2.75 with dt = 0.25 Time integration of scalars at level 0 from 2.5 to 2.75 with dt = 0.25 using RHS created at 2.666666666667 Making slow rhs at time 2.75 for fast variables advancing from 2.5 to 3 No-substepping time integration at level 0 to 3 with dt = 0.5 Time integration of scalars at level 0 from 2.5 to 3 with dt = 0.5 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 48000 cells Coarse STEP 6 ends. TIME = 3 DT = 0.5 Timestep time = 0.067282642 seconds. TIME= 3 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937327 Fixed dt at level 0 is: 0.5 [Level 0 step 7] ADVANCE from elapsed time = 3 to 3.5 with dt = 0.5 Making slow rhs at time 3 for fast variables advancing from 3 to 3.166666666667 No-substepping time integration at level 0 to 3.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3 to 3.166666666667 with dt = 0.1666666666667 using RHS created at 3 Making slow rhs at time 3.166666666667 for fast variables advancing from 3 to 3.25 No-substepping time integration at level 0 to 3.25 with dt = 0.25 Time integration of scalars at level 0 from 3 to 3.25 with dt = 0.25 using RHS created at 3.166666666667 Making slow rhs at time 3.25 for fast variables advancing from 3 to 3.5 No-substepping time integration at level 0 to 3.5 with dt = 0.5 Time integration of scalars at level 0 from 3 to 3.5 with dt = 0.5 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 48000 cells Coarse STEP 7 ends. TIME = 3.5 DT = 0.5 Timestep time = 0.067652138 seconds. TIME= 3.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937341 Fixed dt at level 0 is: 0.5 [Level 0 step 8] ADVANCE from elapsed time = 3.5 to 4 with dt = 0.5 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.666666666667 No-substepping time integration at level 0 to 3.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 3.5 to 3.666666666667 with dt = 0.1666666666667 using RHS created at 3.5 Making slow rhs at time 3.666666666667 for fast variables advancing from 3.5 to 3.75 No-substepping time integration at level 0 to 3.75 with dt = 0.25 Time integration of scalars at level 0 from 3.5 to 3.75 with dt = 0.25 using RHS created at 3.666666666667 Making slow rhs at time 3.75 for fast variables advancing from 3.5 to 4 No-substepping time integration at level 0 to 4 with dt = 0.5 Time integration of scalars at level 0 from 3.5 to 4 with dt = 0.5 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 48000 cells Coarse STEP 8 ends. TIME = 4 DT = 0.5 Timestep time = 0.068110074 seconds. TIME= 4 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937355 Fixed dt at level 0 is: 0.5 [Level 0 step 9] ADVANCE from elapsed time = 4 to 4.5 with dt = 0.5 Making slow rhs at time 4 for fast variables advancing from 4 to 4.166666666667 No-substepping time integration at level 0 to 4.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4 to 4.166666666667 with dt = 0.1666666666667 using RHS created at 4 Making slow rhs at time 4.166666666667 for fast variables advancing from 4 to 4.25 No-substepping time integration at level 0 to 4.25 with dt = 0.25 Time integration of scalars at level 0 from 4 to 4.25 with dt = 0.25 using RHS created at 4.166666666667 Making slow rhs at time 4.25 for fast variables advancing from 4 to 4.5 No-substepping time integration at level 0 to 4.5 with dt = 0.5 Time integration of scalars at level 0 from 4 to 4.5 with dt = 0.5 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 48000 cells Coarse STEP 9 ends. TIME = 4.5 DT = 0.5 Timestep time = 0.06710782 seconds. TIME= 4.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519507 Anelastic dt at level 0 would be: 0.7809937368 Fixed dt at level 0 is: 0.5 [Level 0 step 10] ADVANCE from elapsed time = 4.5 to 5 with dt = 0.5 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.666666666667 No-substepping time integration at level 0 to 4.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 4.5 to 4.666666666667 with dt = 0.1666666666667 using RHS created at 4.5 Making slow rhs at time 4.666666666667 for fast variables advancing from 4.5 to 4.75 No-substepping time integration at level 0 to 4.75 with dt = 0.25 Time integration of scalars at level 0 from 4.5 to 4.75 with dt = 0.25 using RHS created at 4.666666666667 Making slow rhs at time 4.75 for fast variables advancing from 4.5 to 5 No-substepping time integration at level 0 to 5 with dt = 0.5 Time integration of scalars at level 0 from 4.5 to 5 with dt = 0.5 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 48000 cells Coarse STEP 10 ends. TIME = 5 DT = 0.5 Timestep time = 0.067494606 seconds. TIME= 5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937382 Fixed dt at level 0 is: 0.5 [Level 0 step 11] ADVANCE from elapsed time = 5 to 5.5 with dt = 0.5 Making slow rhs at time 5 for fast variables advancing from 5 to 5.166666666667 No-substepping time integration at level 0 to 5.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5 to 5.166666666667 with dt = 0.1666666666667 using RHS created at 5 Making slow rhs at time 5.166666666667 for fast variables advancing from 5 to 5.25 No-substepping time integration at level 0 to 5.25 with dt = 0.25 Time integration of scalars at level 0 from 5 to 5.25 with dt = 0.25 using RHS created at 5.166666666667 Making slow rhs at time 5.25 for fast variables advancing from 5 to 5.5 No-substepping time integration at level 0 to 5.5 with dt = 0.5 Time integration of scalars at level 0 from 5 to 5.5 with dt = 0.5 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 48000 cells Coarse STEP 11 ends. TIME = 5.5 DT = 0.5 Timestep time = 0.06757586 seconds. TIME= 5.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937395 Fixed dt at level 0 is: 0.5 [Level 0 step 12] ADVANCE from elapsed time = 5.5 to 6 with dt = 0.5 Making slow rhs at time 5.5 for fast variables advancing from 5.5 to 5.666666666667 No-substepping time integration at level 0 to 5.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 5.5 to 5.666666666667 with dt = 0.1666666666667 using RHS created at 5.5 Making slow rhs at time 5.666666666667 for fast variables advancing from 5.5 to 5.75 No-substepping time integration at level 0 to 5.75 with dt = 0.25 Time integration of scalars at level 0 from 5.5 to 5.75 with dt = 0.25 using RHS created at 5.666666666667 Making slow rhs at time 5.75 for fast variables advancing from 5.5 to 6 No-substepping time integration at level 0 to 6 with dt = 0.5 Time integration of scalars at level 0 from 5.5 to 6 with dt = 0.5 using RHS created at 5.75 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 48000 cells Coarse STEP 12 ends. TIME = 6 DT = 0.5 Timestep time = 0.067968249 seconds. TIME= 6 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519508 Anelastic dt at level 0 would be: 0.7809937409 Fixed dt at level 0 is: 0.5 [Level 0 step 13] ADVANCE from elapsed time = 6 to 6.5 with dt = 0.5 Making slow rhs at time 6 for fast variables advancing from 6 to 6.166666666667 No-substepping time integration at level 0 to 6.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6 to 6.166666666667 with dt = 0.1666666666667 using RHS created at 6 Making slow rhs at time 6.166666666667 for fast variables advancing from 6 to 6.25 No-substepping time integration at level 0 to 6.25 with dt = 0.25 Time integration of scalars at level 0 from 6 to 6.25 with dt = 0.25 using RHS created at 6.166666666667 Making slow rhs at time 6.25 for fast variables advancing from 6 to 6.5 No-substepping time integration at level 0 to 6.5 with dt = 0.5 Time integration of scalars at level 0 from 6 to 6.5 with dt = 0.5 using RHS created at 6.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 48000 cells Coarse STEP 13 ends. TIME = 6.5 DT = 0.5 Timestep time = 0.067603152 seconds. TIME= 6.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937423 Fixed dt at level 0 is: 0.5 [Level 0 step 14] ADVANCE from elapsed time = 6.5 to 7 with dt = 0.5 Making slow rhs at time 6.5 for fast variables advancing from 6.5 to 6.666666666667 No-substepping time integration at level 0 to 6.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 6.5 to 6.666666666667 with dt = 0.1666666666667 using RHS created at 6.5 Making slow rhs at time 6.666666666667 for fast variables advancing from 6.5 to 6.75 No-substepping time integration at level 0 to 6.75 with dt = 0.25 Time integration of scalars at level 0 from 6.5 to 6.75 with dt = 0.25 using RHS created at 6.666666666667 Making slow rhs at time 6.75 for fast variables advancing from 6.5 to 7 No-substepping time integration at level 0 to 7 with dt = 0.5 Time integration of scalars at level 0 from 6.5 to 7 with dt = 0.5 using RHS created at 6.75 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 48000 cells Coarse STEP 14 ends. TIME = 7 DT = 0.5 Timestep time = 0.067735784 seconds. TIME= 7 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937436 Fixed dt at level 0 is: 0.5 [Level 0 step 15] ADVANCE from elapsed time = 7 to 7.5 with dt = 0.5 Making slow rhs at time 7 for fast variables advancing from 7 to 7.166666666667 No-substepping time integration at level 0 to 7.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7 to 7.166666666667 with dt = 0.1666666666667 using RHS created at 7 Making slow rhs at time 7.166666666667 for fast variables advancing from 7 to 7.25 No-substepping time integration at level 0 to 7.25 with dt = 0.25 Time integration of scalars at level 0 from 7 to 7.25 with dt = 0.25 using RHS created at 7.166666666667 Making slow rhs at time 7.25 for fast variables advancing from 7 to 7.5 No-substepping time integration at level 0 to 7.5 with dt = 0.5 Time integration of scalars at level 0 from 7 to 7.5 with dt = 0.5 using RHS created at 7.25 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 48000 cells Coarse STEP 15 ends. TIME = 7.5 DT = 0.5 Timestep time = 0.067819187 seconds. TIME= 7.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.780993745 Fixed dt at level 0 is: 0.5 [Level 0 step 16] ADVANCE from elapsed time = 7.5 to 8 with dt = 0.5 Making slow rhs at time 7.5 for fast variables advancing from 7.5 to 7.666666666667 No-substepping time integration at level 0 to 7.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 7.5 to 7.666666666667 with dt = 0.1666666666667 using RHS created at 7.5 Making slow rhs at time 7.666666666667 for fast variables advancing from 7.5 to 7.75 No-substepping time integration at level 0 to 7.75 with dt = 0.25 Time integration of scalars at level 0 from 7.5 to 7.75 with dt = 0.25 using RHS created at 7.666666666667 Making slow rhs at time 7.75 for fast variables advancing from 7.5 to 8 No-substepping time integration at level 0 to 8 with dt = 0.5 Time integration of scalars at level 0 from 7.5 to 8 with dt = 0.5 using RHS created at 7.75 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 48000 cells Coarse STEP 16 ends. TIME = 8 DT = 0.5 Timestep time = 0.067027126 seconds. TIME= 8 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519509 Anelastic dt at level 0 would be: 0.7809937463 Fixed dt at level 0 is: 0.5 [Level 0 step 17] ADVANCE from elapsed time = 8 to 8.5 with dt = 0.5 Making slow rhs at time 8 for fast variables advancing from 8 to 8.166666666667 No-substepping time integration at level 0 to 8.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8 to 8.166666666667 with dt = 0.1666666666667 using RHS created at 8 Making slow rhs at time 8.166666666667 for fast variables advancing from 8 to 8.25 No-substepping time integration at level 0 to 8.25 with dt = 0.25 Time integration of scalars at level 0 from 8 to 8.25 with dt = 0.25 using RHS created at 8.166666666667 Making slow rhs at time 8.25 for fast variables advancing from 8 to 8.5 No-substepping time integration at level 0 to 8.5 with dt = 0.5 Time integration of scalars at level 0 from 8 to 8.5 with dt = 0.5 using RHS created at 8.25 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 48000 cells Coarse STEP 17 ends. TIME = 8.5 DT = 0.5 Timestep time = 0.067449442 seconds. TIME= 8.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937477 Fixed dt at level 0 is: 0.5 [Level 0 step 18] ADVANCE from elapsed time = 8.5 to 9 with dt = 0.5 Making slow rhs at time 8.5 for fast variables advancing from 8.5 to 8.666666666667 No-substepping time integration at level 0 to 8.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 8.5 to 8.666666666667 with dt = 0.1666666666667 using RHS created at 8.5 Making slow rhs at time 8.666666666667 for fast variables advancing from 8.5 to 8.75 No-substepping time integration at level 0 to 8.75 with dt = 0.25 Time integration of scalars at level 0 from 8.5 to 8.75 with dt = 0.25 using RHS created at 8.666666666667 Making slow rhs at time 8.75 for fast variables advancing from 8.5 to 9 No-substepping time integration at level 0 to 9 with dt = 0.5 Time integration of scalars at level 0 from 8.5 to 9 with dt = 0.5 using RHS created at 8.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 48000 cells Coarse STEP 18 ends. TIME = 9 DT = 0.5 Timestep time = 0.06767464 seconds. TIME= 9 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.780993749 Fixed dt at level 0 is: 0.5 [Level 0 step 19] ADVANCE from elapsed time = 9 to 9.5 with dt = 0.5 Making slow rhs at time 9 for fast variables advancing from 9 to 9.166666666667 No-substepping time integration at level 0 to 9.166666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9 to 9.166666666667 with dt = 0.1666666666667 using RHS created at 9 Making slow rhs at time 9.166666666667 for fast variables advancing from 9 to 9.25 No-substepping time integration at level 0 to 9.25 with dt = 0.25 Time integration of scalars at level 0 from 9 to 9.25 with dt = 0.25 using RHS created at 9.166666666667 Making slow rhs at time 9.25 for fast variables advancing from 9 to 9.5 No-substepping time integration at level 0 to 9.5 with dt = 0.5 Time integration of scalars at level 0 from 9 to 9.5 with dt = 0.5 using RHS created at 9.25 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 48000 cells Coarse STEP 19 ends. TIME = 9.5 DT = 0.5 Timestep time = 0.067476847 seconds. TIME= 9.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937504 Fixed dt at level 0 is: 0.5 [Level 0 step 20] ADVANCE from elapsed time = 9.5 to 10 with dt = 0.5 Making slow rhs at time 9.5 for fast variables advancing from 9.5 to 9.666666666667 No-substepping time integration at level 0 to 9.666666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 9.5 to 9.666666666667 with dt = 0.1666666666667 using RHS created at 9.5 Making slow rhs at time 9.666666666667 for fast variables advancing from 9.5 to 9.75 No-substepping time integration at level 0 to 9.75 with dt = 0.25 Time integration of scalars at level 0 from 9.5 to 9.75 with dt = 0.25 using RHS created at 9.666666666667 Making slow rhs at time 9.75 for fast variables advancing from 9.5 to 10 No-substepping time integration at level 0 to 10 with dt = 0.5 Time integration of scalars at level 0 from 9.5 to 10 with dt = 0.5 using RHS created at 9.75 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 48000 cells Coarse STEP 20 ends. TIME = 10 DT = 0.5 Timestep time = 0.067819099 seconds. TIME= 10 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0354151951 Anelastic dt at level 0 would be: 0.7809937518 Fixed dt at level 0 is: 0.5 [Level 0 step 21] ADVANCE from elapsed time = 10 to 10.5 with dt = 0.5 Making slow rhs at time 10 for fast variables advancing from 10 to 10.16666666667 No-substepping time integration at level 0 to 10.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10 to 10.16666666667 with dt = 0.1666666666667 using RHS created at 10 Making slow rhs at time 10.16666666667 for fast variables advancing from 10 to 10.25 No-substepping time integration at level 0 to 10.25 with dt = 0.25 Time integration of scalars at level 0 from 10 to 10.25 with dt = 0.25 using RHS created at 10.16666666667 Making slow rhs at time 10.25 for fast variables advancing from 10 to 10.5 No-substepping time integration at level 0 to 10.5 with dt = 0.5 Time integration of scalars at level 0 from 10 to 10.5 with dt = 0.5 using RHS created at 10.25 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 48000 cells Coarse STEP 21 ends. TIME = 10.5 DT = 0.5 Timestep time = 0.067622331 seconds. TIME= 10.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937531 Fixed dt at level 0 is: 0.5 [Level 0 step 22] ADVANCE from elapsed time = 10.5 to 11 with dt = 0.5 Making slow rhs at time 10.5 for fast variables advancing from 10.5 to 10.66666666667 No-substepping time integration at level 0 to 10.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 10.5 to 10.66666666667 with dt = 0.1666666666667 using RHS created at 10.5 Making slow rhs at time 10.66666666667 for fast variables advancing from 10.5 to 10.75 No-substepping time integration at level 0 to 10.75 with dt = 0.25 Time integration of scalars at level 0 from 10.5 to 10.75 with dt = 0.25 using RHS created at 10.66666666667 Making slow rhs at time 10.75 for fast variables advancing from 10.5 to 11 No-substepping time integration at level 0 to 11 with dt = 0.5 Time integration of scalars at level 0 from 10.5 to 11 with dt = 0.5 using RHS created at 10.75 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 48000 cells Coarse STEP 22 ends. TIME = 11 DT = 0.5 Timestep time = 0.067679087 seconds. TIME= 11 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937545 Fixed dt at level 0 is: 0.5 [Level 0 step 23] ADVANCE from elapsed time = 11 to 11.5 with dt = 0.5 Making slow rhs at time 11 for fast variables advancing from 11 to 11.16666666667 No-substepping time integration at level 0 to 11.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11 to 11.16666666667 with dt = 0.1666666666667 using RHS created at 11 Making slow rhs at time 11.16666666667 for fast variables advancing from 11 to 11.25 No-substepping time integration at level 0 to 11.25 with dt = 0.25 Time integration of scalars at level 0 from 11 to 11.25 with dt = 0.25 using RHS created at 11.16666666667 Making slow rhs at time 11.25 for fast variables advancing from 11 to 11.5 No-substepping time integration at level 0 to 11.5 with dt = 0.5 Time integration of scalars at level 0 from 11 to 11.5 with dt = 0.5 using RHS created at 11.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 48000 cells Coarse STEP 23 ends. TIME = 11.5 DT = 0.5 Timestep time = 0.067687401 seconds. TIME= 11.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519511 Anelastic dt at level 0 would be: 0.7809937558 Fixed dt at level 0 is: 0.5 [Level 0 step 24] ADVANCE from elapsed time = 11.5 to 12 with dt = 0.5 Making slow rhs at time 11.5 for fast variables advancing from 11.5 to 11.66666666667 No-substepping time integration at level 0 to 11.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 11.5 to 11.66666666667 with dt = 0.1666666666667 using RHS created at 11.5 Making slow rhs at time 11.66666666667 for fast variables advancing from 11.5 to 11.75 No-substepping time integration at level 0 to 11.75 with dt = 0.25 Time integration of scalars at level 0 from 11.5 to 11.75 with dt = 0.25 using RHS created at 11.66666666667 Making slow rhs at time 11.75 for fast variables advancing from 11.5 to 12 No-substepping time integration at level 0 to 12 with dt = 0.5 Time integration of scalars at level 0 from 11.5 to 12 with dt = 0.5 using RHS created at 11.75 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 48000 cells Coarse STEP 24 ends. TIME = 12 DT = 0.5 Timestep time = 0.067513696 seconds. TIME= 12 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937572 Fixed dt at level 0 is: 0.5 [Level 0 step 25] ADVANCE from elapsed time = 12 to 12.5 with dt = 0.5 Making slow rhs at time 12 for fast variables advancing from 12 to 12.16666666667 No-substepping time integration at level 0 to 12.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12 to 12.16666666667 with dt = 0.1666666666667 using RHS created at 12 Making slow rhs at time 12.16666666667 for fast variables advancing from 12 to 12.25 No-substepping time integration at level 0 to 12.25 with dt = 0.25 Time integration of scalars at level 0 from 12 to 12.25 with dt = 0.25 using RHS created at 12.16666666667 Making slow rhs at time 12.25 for fast variables advancing from 12 to 12.5 No-substepping time integration at level 0 to 12.5 with dt = 0.5 Time integration of scalars at level 0 from 12 to 12.5 with dt = 0.5 using RHS created at 12.25 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 48000 cells Coarse STEP 25 ends. TIME = 12.5 DT = 0.5 Timestep time = 0.068558666 seconds. TIME= 12.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Writing native checkpoint EkmanSpiral_restart_chk00025 Checkpoint write time = 0.010642542 seconds. Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937585 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666666667 No-substepping time integration at level 0 to 12.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 using RHS created at 12.5 Making slow rhs at time 12.66666666667 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666666667 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 48000 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.06779734 seconds. TIME= 13 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937599 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666666667 No-substepping time integration at level 0 to 13.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 using RHS created at 13 Making slow rhs at time 13.16666666667 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666666667 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 48000 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.067938835 seconds. TIME= 13.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937613 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666666667 No-substepping time integration at level 0 to 13.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 using RHS created at 13.5 Making slow rhs at time 13.66666666667 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666666667 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 48000 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.067901189 seconds. TIME= 14 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937626 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666666667 No-substepping time integration at level 0 to 14.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 using RHS created at 14 Making slow rhs at time 14.16666666667 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666666667 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 48000 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.067822334 seconds. TIME= 14.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.780993764 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666666667 No-substepping time integration at level 0 to 14.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 using RHS created at 14.5 Making slow rhs at time 14.66666666667 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666666667 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 48000 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.067481722 seconds. TIME= 15 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937653 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666666667 No-substepping time integration at level 0 to 15.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 using RHS created at 15 Making slow rhs at time 15.16666666667 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666666667 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 48000 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.067684998 seconds. TIME= 15.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937667 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666666667 No-substepping time integration at level 0 to 15.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 using RHS created at 15.5 Making slow rhs at time 15.66666666667 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666666667 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 48000 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.06774326 seconds. TIME= 16 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937681 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666666667 No-substepping time integration at level 0 to 16.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 using RHS created at 16 Making slow rhs at time 16.16666666667 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666666667 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 48000 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.068506566 seconds. TIME= 16.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937694 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666666667 No-substepping time integration at level 0 to 16.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 using RHS created at 16.5 Making slow rhs at time 16.66666666667 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666666667 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 48000 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.067785761 seconds. TIME= 17 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937708 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666666667 No-substepping time integration at level 0 to 17.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 using RHS created at 17 Making slow rhs at time 17.16666666667 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666666667 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 48000 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.067763383 seconds. TIME= 17.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937721 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666666667 No-substepping time integration at level 0 to 17.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 using RHS created at 17.5 Making slow rhs at time 17.66666666667 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666666667 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 48000 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.068129666 seconds. TIME= 18 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937735 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666666667 No-substepping time integration at level 0 to 18.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 using RHS created at 18 Making slow rhs at time 18.16666666667 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666666667 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 48000 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.067526049 seconds. TIME= 18.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937748 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666666667 No-substepping time integration at level 0 to 18.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 using RHS created at 18.5 Making slow rhs at time 18.66666666667 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666666667 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 48000 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.067393803 seconds. TIME= 19 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937762 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666666667 No-substepping time integration at level 0 to 19.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 using RHS created at 19 Making slow rhs at time 19.16666666667 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666666667 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 48000 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.067248372 seconds. TIME= 19.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937776 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666666667 No-substepping time integration at level 0 to 19.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 using RHS created at 19.5 Making slow rhs at time 19.66666666667 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666666667 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 48000 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.067502543 seconds. TIME= 20 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937789 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666666667 No-substepping time integration at level 0 to 20.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 using RHS created at 20 Making slow rhs at time 20.16666666667 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666666667 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 48000 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.067899806 seconds. TIME= 20.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937803 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666666667 No-substepping time integration at level 0 to 20.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 using RHS created at 20.5 Making slow rhs at time 20.66666666667 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666666667 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 48000 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.067670866 seconds. TIME= 21 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937816 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666666667 No-substepping time integration at level 0 to 21.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 using RHS created at 21 Making slow rhs at time 21.16666666667 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666666667 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 48000 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.067487249 seconds. TIME= 21.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.780993783 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666666667 No-substepping time integration at level 0 to 21.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 using RHS created at 21.5 Making slow rhs at time 21.66666666667 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666666667 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 48000 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.067259001 seconds. TIME= 22 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937844 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666666667 No-substepping time integration at level 0 to 22.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 using RHS created at 22 Making slow rhs at time 22.16666666667 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666666667 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 48000 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.067579283 seconds. TIME= 22.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937857 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666666667 No-substepping time integration at level 0 to 22.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 using RHS created at 22.5 Making slow rhs at time 22.66666666667 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666666667 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 48000 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.067805705 seconds. TIME= 23 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937871 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666666667 No-substepping time integration at level 0 to 23.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 using RHS created at 23 Making slow rhs at time 23.16666666667 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666666667 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 48000 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.068102284 seconds. TIME= 23.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937884 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666666667 No-substepping time integration at level 0 to 23.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 using RHS created at 23.5 Making slow rhs at time 23.66666666667 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666666667 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 48000 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.071772226 seconds. TIME= 24 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937898 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666666667 No-substepping time integration at level 0 to 24.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 using RHS created at 24 Making slow rhs at time 24.16666666667 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666666667 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 48000 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.067405212 seconds. TIME= 24.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519519 Anelastic dt at level 0 would be: 0.7809937911 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666666667 No-substepping time integration at level 0 to 24.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 using RHS created at 24.5 Making slow rhs at time 24.66666666667 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666666667 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 48000 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.067786277 seconds. TIME= 25 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Writing native checkpoint EkmanSpiral_restart_chk00050 Checkpoint write time = 0.008902494 seconds. Writing native 3D plotfile EkmanSpiral_restart_plt00050 3DPlotfile write time = 0.012349516 seconds. Total Time: 3.574996262 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [1] AMReX (26.04-116-g6f2c4aff90ae) finalized Initializing AMReX (26.04-116-g6f2c4aff90ae)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.04-116-g6f2c4aff90ae) initialized Successfully read inputs file ... ERF git hash: d04f314d AMReX git hash: 26.04-116-g6f2c4aff90 Problem name (from inputs file) is: "Ekman Spiral" Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Restart from native checkpoint EkmanSpiral_restart_chk00025 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (7,5,399) (0,0,0)) ((8,0,0) (11,5,399) (0,0,0)) ((0,6,0) (7,9,399) (0,0,0)) ((8,6,0) (11,9,399) (0,0,0)) ) Reading LMASK data Restart time = 0.074506098 seconds. smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.008 Writing native 3D plotfile EkmanSpiral_restart_plt00025 3DPlotfile write time = 0.010630308 seconds. TIME= 12.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937585 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666666667 No-substepping time integration at level 0 to 12.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 12.5 to 12.66666666667 with dt = 0.1666666666667 using RHS created at 12.5 Making slow rhs at time 12.66666666667 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666666667 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 48000 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.069311179 seconds. TIME= 13 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937599 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666666667 No-substepping time integration at level 0 to 13.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13 to 13.16666666667 with dt = 0.1666666666667 using RHS created at 13 Making slow rhs at time 13.16666666667 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666666667 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 48000 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.068399419 seconds. TIME= 13.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519512 Anelastic dt at level 0 would be: 0.7809937613 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666666667 No-substepping time integration at level 0 to 13.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 13.5 to 13.66666666667 with dt = 0.1666666666667 using RHS created at 13.5 Making slow rhs at time 13.66666666667 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666666667 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 48000 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.067907872 seconds. TIME= 14 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937626 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666666667 No-substepping time integration at level 0 to 14.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14 to 14.16666666667 with dt = 0.1666666666667 using RHS created at 14 Making slow rhs at time 14.16666666667 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666666667 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 48000 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.06995628 seconds. TIME= 14.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.780993764 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666666667 No-substepping time integration at level 0 to 14.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 14.5 to 14.66666666667 with dt = 0.1666666666667 using RHS created at 14.5 Making slow rhs at time 14.66666666667 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666666667 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 48000 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.068908826 seconds. TIME= 15 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519513 Anelastic dt at level 0 would be: 0.7809937653 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666666667 No-substepping time integration at level 0 to 15.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15 to 15.16666666667 with dt = 0.1666666666667 using RHS created at 15 Making slow rhs at time 15.16666666667 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666666667 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 48000 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.069252395 seconds. TIME= 15.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937667 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666666667 No-substepping time integration at level 0 to 15.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 15.5 to 15.66666666667 with dt = 0.1666666666667 using RHS created at 15.5 Making slow rhs at time 15.66666666667 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666666667 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 48000 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.068059269 seconds. TIME= 16 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937681 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666666667 No-substepping time integration at level 0 to 16.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16 to 16.16666666667 with dt = 0.1666666666667 using RHS created at 16 Making slow rhs at time 16.16666666667 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666666667 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 48000 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.069296521 seconds. TIME= 16.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937694 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666666667 No-substepping time integration at level 0 to 16.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 16.5 to 16.66666666667 with dt = 0.1666666666667 using RHS created at 16.5 Making slow rhs at time 16.66666666667 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666666667 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 48000 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.069243099 seconds. TIME= 17 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519514 Anelastic dt at level 0 would be: 0.7809937708 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666666667 No-substepping time integration at level 0 to 17.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17 to 17.16666666667 with dt = 0.1666666666667 using RHS created at 17 Making slow rhs at time 17.16666666667 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666666667 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 48000 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.068040077 seconds. TIME= 17.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937721 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666666667 No-substepping time integration at level 0 to 17.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 17.5 to 17.66666666667 with dt = 0.1666666666667 using RHS created at 17.5 Making slow rhs at time 17.66666666667 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666666667 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 48000 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.070612324 seconds. TIME= 18 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937735 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666666667 No-substepping time integration at level 0 to 18.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18 to 18.16666666667 with dt = 0.1666666666667 using RHS created at 18 Making slow rhs at time 18.16666666667 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666666667 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 48000 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.068753956 seconds. TIME= 18.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519515 Anelastic dt at level 0 would be: 0.7809937748 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666666667 No-substepping time integration at level 0 to 18.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 18.5 to 18.66666666667 with dt = 0.1666666666667 using RHS created at 18.5 Making slow rhs at time 18.66666666667 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666666667 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 48000 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.068370899 seconds. TIME= 19 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937762 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666666667 No-substepping time integration at level 0 to 19.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19 to 19.16666666667 with dt = 0.1666666666667 using RHS created at 19 Making slow rhs at time 19.16666666667 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666666667 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 48000 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.068770583 seconds. TIME= 19.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937776 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666666667 No-substepping time integration at level 0 to 19.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 19.5 to 19.66666666667 with dt = 0.1666666666667 using RHS created at 19.5 Making slow rhs at time 19.66666666667 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666666667 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 48000 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.067964021 seconds. TIME= 20 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937789 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666666667 No-substepping time integration at level 0 to 20.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20 to 20.16666666667 with dt = 0.1666666666667 using RHS created at 20 Making slow rhs at time 20.16666666667 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666666667 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 48000 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.068452459 seconds. TIME= 20.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519516 Anelastic dt at level 0 would be: 0.7809937803 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666666667 No-substepping time integration at level 0 to 20.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 20.5 to 20.66666666667 with dt = 0.1666666666667 using RHS created at 20.5 Making slow rhs at time 20.66666666667 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666666667 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 48000 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.069244333 seconds. TIME= 21 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937816 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666666667 No-substepping time integration at level 0 to 21.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21 to 21.16666666667 with dt = 0.1666666666667 using RHS created at 21 Making slow rhs at time 21.16666666667 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666666667 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 48000 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.068441142 seconds. TIME= 21.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.780993783 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666666667 No-substepping time integration at level 0 to 21.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 21.5 to 21.66666666667 with dt = 0.1666666666667 using RHS created at 21.5 Making slow rhs at time 21.66666666667 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666666667 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 48000 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.068360711 seconds. TIME= 22 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937844 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666666667 No-substepping time integration at level 0 to 22.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22 to 22.16666666667 with dt = 0.1666666666667 using RHS created at 22 Making slow rhs at time 22.16666666667 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666666667 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 48000 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.068762979 seconds. TIME= 22.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519517 Anelastic dt at level 0 would be: 0.7809937857 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666666667 No-substepping time integration at level 0 to 22.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 22.5 to 22.66666666667 with dt = 0.1666666666667 using RHS created at 22.5 Making slow rhs at time 22.66666666667 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666666667 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 48000 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.069761576 seconds. TIME= 23 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937871 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666666667 No-substepping time integration at level 0 to 23.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23 to 23.16666666667 with dt = 0.1666666666667 using RHS created at 23 Making slow rhs at time 23.16666666667 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666666667 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 48000 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.068895288 seconds. TIME= 23.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937884 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666666667 No-substepping time integration at level 0 to 23.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 23.5 to 23.66666666667 with dt = 0.1666666666667 using RHS created at 23.5 Making slow rhs at time 23.66666666667 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666666667 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 48000 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.069172004 seconds. TIME= 24 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519518 Anelastic dt at level 0 would be: 0.7809937898 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666666667 No-substepping time integration at level 0 to 24.16666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24 to 24.16666666667 with dt = 0.1666666666667 using RHS created at 24 Making slow rhs at time 24.16666666667 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666666667 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 48000 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.070039811 seconds. TIME= 24.5 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519519 Anelastic dt at level 0 would be: 0.7809937911 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666666667 No-substepping time integration at level 0 to 24.66666666667 with dt = 0.1666666666667 Time integration of scalars at level 0 from 24.5 to 24.66666666667 with dt = 0.1666666666667 using RHS created at 24.5 Making slow rhs at time 24.66666666667 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666666667 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 48000 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.06833178 seconds. TIME= 25 MASS = 93750000 RHO THETA = 2.8125e+10 RHO SCALAR = 0 Writing native 3D plotfile EkmanSpiral_restart_plt00050 3DPlotfile write time = 0.011759156 seconds. Writing native checkpoint EkmanSpiral_restart_chk00050 Checkpoint write time = 0.028289831 seconds. Total Time: 1.898780485 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] AMReX (26.04-116-g6f2c4aff90ae) finalized