Initializing AMReX (26.05-41-gba3cb0c68650)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.05-41-gba3cb0c68650) initialized Successfully read inputs file ... ERF git hash: 9c8926bb-dirty AMReX git hash: 26.05-41-gba3cb0c686 Problem name (from inputs file) is: "Ekman Spiral" Coriolis frequency, f = 0.0001458423212 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.002187634818,9.562455688e-11) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (7,5,399) (0,0,0)) ((8,0,0) (11,5,399) (0,0,0)) ((0,6,0) (7,9,399) (0,0,0)) ((8,6,0) (11,9,399) (0,0,0)) ) max of zphys_nd 5000 max of zlevels 5000 Problem name "ekman spiral" is not known, no state perturbations added. Problem name "ekman spiral" is not known, no velocity perturbations added. Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.00800000038 Writing native checkpoint EkmanSpiral_restart_chk00000 Checkpoint write time = 0.030065236 seconds. Writing native 3D plotfile EkmanSpiral_restart_plt00000 3DPlotfile write time = 0.032764435 seconds. TIME= 0 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.5 with dt = 0.5 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1666666716337 No-substepping time integration at level 0 to 0.1666666716337 with dt = 0.1666666716337 Time integration of scalars at level 0 from 0 to 0.1666666716337 with dt = 0.1666666716337 using RHS created at 0 Making slow rhs at time 0.1666666716337 for fast variables advancing from 0 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.25 Time integration of scalars at level 0 from 0 to 0.25 with dt = 0.25 using RHS created at 0.1666666716337 Making slow rhs at time 0.25 for fast variables advancing from 0 to 0.5 No-substepping time integration at level 0 to 0.5 with dt = 0.5 Time integration of scalars at level 0 from 0 to 0.5 with dt = 0.5 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 48000 cells Coarse STEP 1 ends. TIME = 0.5 DT = 0.5 Timestep time = 0.050355426 seconds. TIME= 0.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 2] ADVANCE from elapsed time = 0.5 to 1 with dt = 0.5 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.6666666865349 No-substepping time integration at level 0 to 0.6666666865349 with dt = 0.1666666716337 Time integration of scalars at level 0 from 0.5 to 0.6666666865349 with dt = 0.1666666865349 using RHS created at 0.5 Making slow rhs at time 0.6666666865349 for fast variables advancing from 0.5 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.25 Time integration of scalars at level 0 from 0.5 to 0.75 with dt = 0.25 using RHS created at 0.6666666865349 Making slow rhs at time 0.75 for fast variables advancing from 0.5 to 1 No-substepping time integration at level 0 to 1 with dt = 0.5 Time integration of scalars at level 0 from 0.5 to 1 with dt = 0.5 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 48000 cells Coarse STEP 2 ends. TIME = 1 DT = 0.5 Timestep time = 0.034121117 seconds. TIME= 1 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 3] ADVANCE from elapsed time = 1 to 1.5 with dt = 0.5 Making slow rhs at time 1 for fast variables advancing from 1 to 1.16666662693 No-substepping time integration at level 0 to 1.16666662693 with dt = 0.1666666716337 Time integration of scalars at level 0 from 1 to 1.16666662693 with dt = 0.1666666269302 using RHS created at 1 Making slow rhs at time 1.16666662693 for fast variables advancing from 1 to 1.25 No-substepping time integration at level 0 to 1.25 with dt = 0.25 Time integration of scalars at level 0 from 1 to 1.25 with dt = 0.25 using RHS created at 1.16666662693 Making slow rhs at time 1.25 for fast variables advancing from 1 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.5 Time integration of scalars at level 0 from 1 to 1.5 with dt = 0.5 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 48000 cells Coarse STEP 3 ends. TIME = 1.5 DT = 0.5 Timestep time = 0.033998933 seconds. TIME= 1.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 4] ADVANCE from elapsed time = 1.5 to 2 with dt = 0.5 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.66666662693 No-substepping time integration at level 0 to 1.66666662693 with dt = 0.1666666716337 Time integration of scalars at level 0 from 1.5 to 1.66666662693 with dt = 0.1666666269302 using RHS created at 1.5 Making slow rhs at time 1.66666662693 for fast variables advancing from 1.5 to 1.75 No-substepping time integration at level 0 to 1.75 with dt = 0.25 Time integration of scalars at level 0 from 1.5 to 1.75 with dt = 0.25 using RHS created at 1.66666662693 Making slow rhs at time 1.75 for fast variables advancing from 1.5 to 2 No-substepping time integration at level 0 to 2 with dt = 0.5 Time integration of scalars at level 0 from 1.5 to 2 with dt = 0.5 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 48000 cells Coarse STEP 4 ends. TIME = 2 DT = 0.5 Timestep time = 0.034222605 seconds. TIME= 2 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 5] ADVANCE from elapsed time = 2 to 2.5 with dt = 0.5 Making slow rhs at time 2 for fast variables advancing from 2 to 2.16666674614 No-substepping time integration at level 0 to 2.16666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 2 to 2.16666674614 with dt = 0.1666667461395 using RHS created at 2 Making slow rhs at time 2.16666674614 for fast variables advancing from 2 to 2.25 No-substepping time integration at level 0 to 2.25 with dt = 0.25 Time integration of scalars at level 0 from 2 to 2.25 with dt = 0.25 using RHS created at 2.16666674614 Making slow rhs at time 2.25 for fast variables advancing from 2 to 2.5 No-substepping time integration at level 0 to 2.5 with dt = 0.5 Time integration of scalars at level 0 from 2 to 2.5 with dt = 0.5 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 48000 cells Coarse STEP 5 ends. TIME = 2.5 DT = 0.5 Timestep time = 0.035175456 seconds. TIME= 2.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 6] ADVANCE from elapsed time = 2.5 to 3 with dt = 0.5 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.66666674614 No-substepping time integration at level 0 to 2.66666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 2.5 to 2.66666674614 with dt = 0.1666667461395 using RHS created at 2.5 Making slow rhs at time 2.66666674614 for fast variables advancing from 2.5 to 2.75 No-substepping time integration at level 0 to 2.75 with dt = 0.25 Time integration of scalars at level 0 from 2.5 to 2.75 with dt = 0.25 using RHS created at 2.66666674614 Making slow rhs at time 2.75 for fast variables advancing from 2.5 to 3 No-substepping time integration at level 0 to 3 with dt = 0.5 Time integration of scalars at level 0 from 2.5 to 3 with dt = 0.5 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 48000 cells Coarse STEP 6 ends. TIME = 3 DT = 0.5 Timestep time = 0.034983365 seconds. TIME= 3 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 7] ADVANCE from elapsed time = 3 to 3.5 with dt = 0.5 Making slow rhs at time 3 for fast variables advancing from 3 to 3.16666674614 No-substepping time integration at level 0 to 3.16666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 3 to 3.16666674614 with dt = 0.1666667461395 using RHS created at 3 Making slow rhs at time 3.16666674614 for fast variables advancing from 3 to 3.25 No-substepping time integration at level 0 to 3.25 with dt = 0.25 Time integration of scalars at level 0 from 3 to 3.25 with dt = 0.25 using RHS created at 3.16666674614 Making slow rhs at time 3.25 for fast variables advancing from 3 to 3.5 No-substepping time integration at level 0 to 3.5 with dt = 0.5 Time integration of scalars at level 0 from 3 to 3.5 with dt = 0.5 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 48000 cells Coarse STEP 7 ends. TIME = 3.5 DT = 0.5 Timestep time = 0.035169952 seconds. TIME= 3.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 8] ADVANCE from elapsed time = 3.5 to 4 with dt = 0.5 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.66666674614 No-substepping time integration at level 0 to 3.66666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 3.5 to 3.66666674614 with dt = 0.1666667461395 using RHS created at 3.5 Making slow rhs at time 3.66666674614 for fast variables advancing from 3.5 to 3.75 No-substepping time integration at level 0 to 3.75 with dt = 0.25 Time integration of scalars at level 0 from 3.5 to 3.75 with dt = 0.25 using RHS created at 3.66666674614 Making slow rhs at time 3.75 for fast variables advancing from 3.5 to 4 No-substepping time integration at level 0 to 4 with dt = 0.5 Time integration of scalars at level 0 from 3.5 to 4 with dt = 0.5 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 48000 cells Coarse STEP 8 ends. TIME = 4 DT = 0.5 Timestep time = 0.035241772 seconds. TIME= 4 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 9] ADVANCE from elapsed time = 4 to 4.5 with dt = 0.5 Making slow rhs at time 4 for fast variables advancing from 4 to 4.166666507721 No-substepping time integration at level 0 to 4.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 4 to 4.166666507721 with dt = 0.1666665077209 using RHS created at 4 Making slow rhs at time 4.166666507721 for fast variables advancing from 4 to 4.25 No-substepping time integration at level 0 to 4.25 with dt = 0.25 Time integration of scalars at level 0 from 4 to 4.25 with dt = 0.25 using RHS created at 4.166666507721 Making slow rhs at time 4.25 for fast variables advancing from 4 to 4.5 No-substepping time integration at level 0 to 4.5 with dt = 0.5 Time integration of scalars at level 0 from 4 to 4.5 with dt = 0.5 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 48000 cells Coarse STEP 9 ends. TIME = 4.5 DT = 0.5 Timestep time = 0.035432522 seconds. TIME= 4.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 10] ADVANCE from elapsed time = 4.5 to 5 with dt = 0.5 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.666666507721 No-substepping time integration at level 0 to 4.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 4.5 to 4.666666507721 with dt = 0.1666665077209 using RHS created at 4.5 Making slow rhs at time 4.666666507721 for fast variables advancing from 4.5 to 4.75 No-substepping time integration at level 0 to 4.75 with dt = 0.25 Time integration of scalars at level 0 from 4.5 to 4.75 with dt = 0.25 using RHS created at 4.666666507721 Making slow rhs at time 4.75 for fast variables advancing from 4.5 to 5 No-substepping time integration at level 0 to 5 with dt = 0.5 Time integration of scalars at level 0 from 4.5 to 5 with dt = 0.5 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 48000 cells Coarse STEP 10 ends. TIME = 5 DT = 0.5 Timestep time = 0.035134282 seconds. TIME= 5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 11] ADVANCE from elapsed time = 5 to 5.5 with dt = 0.5 Making slow rhs at time 5 for fast variables advancing from 5 to 5.166666507721 No-substepping time integration at level 0 to 5.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 5 to 5.166666507721 with dt = 0.1666665077209 using RHS created at 5 Making slow rhs at time 5.166666507721 for fast variables advancing from 5 to 5.25 No-substepping time integration at level 0 to 5.25 with dt = 0.25 Time integration of scalars at level 0 from 5 to 5.25 with dt = 0.25 using RHS created at 5.166666507721 Making slow rhs at time 5.25 for fast variables advancing from 5 to 5.5 No-substepping time integration at level 0 to 5.5 with dt = 0.5 Time integration of scalars at level 0 from 5 to 5.5 with dt = 0.5 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 48000 cells Coarse STEP 11 ends. TIME = 5.5 DT = 0.5 Timestep time = 0.035611036 seconds. TIME= 5.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 12] ADVANCE from elapsed time = 5.5 to 6 with dt = 0.5 Making slow rhs at time 5.5 for fast variables advancing from 5.5 to 5.666666507721 No-substepping time integration at level 0 to 5.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 5.5 to 5.666666507721 with dt = 0.1666665077209 using RHS created at 5.5 Making slow rhs at time 5.666666507721 for fast variables advancing from 5.5 to 5.75 No-substepping time integration at level 0 to 5.75 with dt = 0.25 Time integration of scalars at level 0 from 5.5 to 5.75 with dt = 0.25 using RHS created at 5.666666507721 Making slow rhs at time 5.75 for fast variables advancing from 5.5 to 6 No-substepping time integration at level 0 to 6 with dt = 0.5 Time integration of scalars at level 0 from 5.5 to 6 with dt = 0.5 using RHS created at 5.75 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 48000 cells Coarse STEP 12 ends. TIME = 6 DT = 0.5 Timestep time = 0.035512411 seconds. TIME= 6 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 13] ADVANCE from elapsed time = 6 to 6.5 with dt = 0.5 Making slow rhs at time 6 for fast variables advancing from 6 to 6.166666507721 No-substepping time integration at level 0 to 6.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 6 to 6.166666507721 with dt = 0.1666665077209 using RHS created at 6 Making slow rhs at time 6.166666507721 for fast variables advancing from 6 to 6.25 No-substepping time integration at level 0 to 6.25 with dt = 0.25 Time integration of scalars at level 0 from 6 to 6.25 with dt = 0.25 using RHS created at 6.166666507721 Making slow rhs at time 6.25 for fast variables advancing from 6 to 6.5 No-substepping time integration at level 0 to 6.5 with dt = 0.5 Time integration of scalars at level 0 from 6 to 6.5 with dt = 0.5 using RHS created at 6.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 48000 cells Coarse STEP 13 ends. TIME = 6.5 DT = 0.5 Timestep time = 0.035701034 seconds. TIME= 6.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 14] ADVANCE from elapsed time = 6.5 to 7 with dt = 0.5 Making slow rhs at time 6.5 for fast variables advancing from 6.5 to 6.666666507721 No-substepping time integration at level 0 to 6.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 6.5 to 6.666666507721 with dt = 0.1666665077209 using RHS created at 6.5 Making slow rhs at time 6.666666507721 for fast variables advancing from 6.5 to 6.75 No-substepping time integration at level 0 to 6.75 with dt = 0.25 Time integration of scalars at level 0 from 6.5 to 6.75 with dt = 0.25 using RHS created at 6.666666507721 Making slow rhs at time 6.75 for fast variables advancing from 6.5 to 7 No-substepping time integration at level 0 to 7 with dt = 0.5 Time integration of scalars at level 0 from 6.5 to 7 with dt = 0.5 using RHS created at 6.75 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 48000 cells Coarse STEP 14 ends. TIME = 7 DT = 0.5 Timestep time = 0.035662344 seconds. TIME= 7 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 15] ADVANCE from elapsed time = 7 to 7.5 with dt = 0.5 Making slow rhs at time 7 for fast variables advancing from 7 to 7.166666507721 No-substepping time integration at level 0 to 7.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 7 to 7.166666507721 with dt = 0.1666665077209 using RHS created at 7 Making slow rhs at time 7.166666507721 for fast variables advancing from 7 to 7.25 No-substepping time integration at level 0 to 7.25 with dt = 0.25 Time integration of scalars at level 0 from 7 to 7.25 with dt = 0.25 using RHS created at 7.166666507721 Making slow rhs at time 7.25 for fast variables advancing from 7 to 7.5 No-substepping time integration at level 0 to 7.5 with dt = 0.5 Time integration of scalars at level 0 from 7 to 7.5 with dt = 0.5 using RHS created at 7.25 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 48000 cells Coarse STEP 15 ends. TIME = 7.5 DT = 0.5 Timestep time = 0.034677436 seconds. TIME= 7.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 16] ADVANCE from elapsed time = 7.5 to 8 with dt = 0.5 Making slow rhs at time 7.5 for fast variables advancing from 7.5 to 7.666666507721 No-substepping time integration at level 0 to 7.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 7.5 to 7.666666507721 with dt = 0.1666665077209 using RHS created at 7.5 Making slow rhs at time 7.666666507721 for fast variables advancing from 7.5 to 7.75 No-substepping time integration at level 0 to 7.75 with dt = 0.25 Time integration of scalars at level 0 from 7.5 to 7.75 with dt = 0.25 using RHS created at 7.666666507721 Making slow rhs at time 7.75 for fast variables advancing from 7.5 to 8 No-substepping time integration at level 0 to 8 with dt = 0.5 Time integration of scalars at level 0 from 7.5 to 8 with dt = 0.5 using RHS created at 7.75 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 48000 cells Coarse STEP 16 ends. TIME = 8 DT = 0.5 Timestep time = 0.034603616 seconds. TIME= 8 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 17] ADVANCE from elapsed time = 8 to 8.5 with dt = 0.5 Making slow rhs at time 8 for fast variables advancing from 8 to 8.166666984558 No-substepping time integration at level 0 to 8.166666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 8 to 8.166666984558 with dt = 0.1666669845581 using RHS created at 8 Making slow rhs at time 8.166666984558 for fast variables advancing from 8 to 8.25 No-substepping time integration at level 0 to 8.25 with dt = 0.25 Time integration of scalars at level 0 from 8 to 8.25 with dt = 0.25 using RHS created at 8.166666984558 Making slow rhs at time 8.25 for fast variables advancing from 8 to 8.5 No-substepping time integration at level 0 to 8.5 with dt = 0.5 Time integration of scalars at level 0 from 8 to 8.5 with dt = 0.5 using RHS created at 8.25 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 48000 cells Coarse STEP 17 ends. TIME = 8.5 DT = 0.5 Timestep time = 0.034927428 seconds. TIME= 8.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 18] ADVANCE from elapsed time = 8.5 to 9 with dt = 0.5 Making slow rhs at time 8.5 for fast variables advancing from 8.5 to 8.666666984558 No-substepping time integration at level 0 to 8.666666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 8.5 to 8.666666984558 with dt = 0.1666669845581 using RHS created at 8.5 Making slow rhs at time 8.666666984558 for fast variables advancing from 8.5 to 8.75 No-substepping time integration at level 0 to 8.75 with dt = 0.25 Time integration of scalars at level 0 from 8.5 to 8.75 with dt = 0.25 using RHS created at 8.666666984558 Making slow rhs at time 8.75 for fast variables advancing from 8.5 to 9 No-substepping time integration at level 0 to 9 with dt = 0.5 Time integration of scalars at level 0 from 8.5 to 9 with dt = 0.5 using RHS created at 8.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 48000 cells Coarse STEP 18 ends. TIME = 9 DT = 0.5 Timestep time = 0.03494714 seconds. TIME= 9 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 19] ADVANCE from elapsed time = 9 to 9.5 with dt = 0.5 Making slow rhs at time 9 for fast variables advancing from 9 to 9.166666984558 No-substepping time integration at level 0 to 9.166666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 9 to 9.166666984558 with dt = 0.1666669845581 using RHS created at 9 Making slow rhs at time 9.166666984558 for fast variables advancing from 9 to 9.25 No-substepping time integration at level 0 to 9.25 with dt = 0.25 Time integration of scalars at level 0 from 9 to 9.25 with dt = 0.25 using RHS created at 9.166666984558 Making slow rhs at time 9.25 for fast variables advancing from 9 to 9.5 No-substepping time integration at level 0 to 9.5 with dt = 0.5 Time integration of scalars at level 0 from 9 to 9.5 with dt = 0.5 using RHS created at 9.25 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 48000 cells Coarse STEP 19 ends. TIME = 9.5 DT = 0.5 Timestep time = 0.034689749 seconds. TIME= 9.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 20] ADVANCE from elapsed time = 9.5 to 10 with dt = 0.5 Making slow rhs at time 9.5 for fast variables advancing from 9.5 to 9.666666984558 No-substepping time integration at level 0 to 9.666666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 9.5 to 9.666666984558 with dt = 0.1666669845581 using RHS created at 9.5 Making slow rhs at time 9.666666984558 for fast variables advancing from 9.5 to 9.75 No-substepping time integration at level 0 to 9.75 with dt = 0.25 Time integration of scalars at level 0 from 9.5 to 9.75 with dt = 0.25 using RHS created at 9.666666984558 Making slow rhs at time 9.75 for fast variables advancing from 9.5 to 10 No-substepping time integration at level 0 to 10 with dt = 0.5 Time integration of scalars at level 0 from 9.5 to 10 with dt = 0.5 using RHS created at 9.75 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 48000 cells Coarse STEP 20 ends. TIME = 10 DT = 0.5 Timestep time = 0.035203075 seconds. TIME= 10 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 21] ADVANCE from elapsed time = 10 to 10.5 with dt = 0.5 Making slow rhs at time 10 for fast variables advancing from 10 to 10.16666698456 No-substepping time integration at level 0 to 10.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 10 to 10.16666698456 with dt = 0.1666669845581 using RHS created at 10 Making slow rhs at time 10.16666698456 for fast variables advancing from 10 to 10.25 No-substepping time integration at level 0 to 10.25 with dt = 0.25 Time integration of scalars at level 0 from 10 to 10.25 with dt = 0.25 using RHS created at 10.16666698456 Making slow rhs at time 10.25 for fast variables advancing from 10 to 10.5 No-substepping time integration at level 0 to 10.5 with dt = 0.5 Time integration of scalars at level 0 from 10 to 10.5 with dt = 0.5 using RHS created at 10.25 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 48000 cells Coarse STEP 21 ends. TIME = 10.5 DT = 0.5 Timestep time = 0.034881572 seconds. TIME= 10.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 22] ADVANCE from elapsed time = 10.5 to 11 with dt = 0.5 Making slow rhs at time 10.5 for fast variables advancing from 10.5 to 10.66666698456 No-substepping time integration at level 0 to 10.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 10.5 to 10.66666698456 with dt = 0.1666669845581 using RHS created at 10.5 Making slow rhs at time 10.66666698456 for fast variables advancing from 10.5 to 10.75 No-substepping time integration at level 0 to 10.75 with dt = 0.25 Time integration of scalars at level 0 from 10.5 to 10.75 with dt = 0.25 using RHS created at 10.66666698456 Making slow rhs at time 10.75 for fast variables advancing from 10.5 to 11 No-substepping time integration at level 0 to 11 with dt = 0.5 Time integration of scalars at level 0 from 10.5 to 11 with dt = 0.5 using RHS created at 10.75 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 48000 cells Coarse STEP 22 ends. TIME = 11 DT = 0.5 Timestep time = 0.034861491 seconds. TIME= 11 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 23] ADVANCE from elapsed time = 11 to 11.5 with dt = 0.5 Making slow rhs at time 11 for fast variables advancing from 11 to 11.16666698456 No-substepping time integration at level 0 to 11.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 11 to 11.16666698456 with dt = 0.1666669845581 using RHS created at 11 Making slow rhs at time 11.16666698456 for fast variables advancing from 11 to 11.25 No-substepping time integration at level 0 to 11.25 with dt = 0.25 Time integration of scalars at level 0 from 11 to 11.25 with dt = 0.25 using RHS created at 11.16666698456 Making slow rhs at time 11.25 for fast variables advancing from 11 to 11.5 No-substepping time integration at level 0 to 11.5 with dt = 0.5 Time integration of scalars at level 0 from 11 to 11.5 with dt = 0.5 using RHS created at 11.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 48000 cells Coarse STEP 23 ends. TIME = 11.5 DT = 0.5 Timestep time = 0.034641698 seconds. TIME= 11.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 24] ADVANCE from elapsed time = 11.5 to 12 with dt = 0.5 Making slow rhs at time 11.5 for fast variables advancing from 11.5 to 11.66666698456 No-substepping time integration at level 0 to 11.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 11.5 to 11.66666698456 with dt = 0.1666669845581 using RHS created at 11.5 Making slow rhs at time 11.66666698456 for fast variables advancing from 11.5 to 11.75 No-substepping time integration at level 0 to 11.75 with dt = 0.25 Time integration of scalars at level 0 from 11.5 to 11.75 with dt = 0.25 using RHS created at 11.66666698456 Making slow rhs at time 11.75 for fast variables advancing from 11.5 to 12 No-substepping time integration at level 0 to 12 with dt = 0.5 Time integration of scalars at level 0 from 11.5 to 12 with dt = 0.5 using RHS created at 11.75 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 48000 cells Coarse STEP 24 ends. TIME = 12 DT = 0.5 Timestep time = 0.034805502 seconds. TIME= 12 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 25] ADVANCE from elapsed time = 12 to 12.5 with dt = 0.5 Making slow rhs at time 12 for fast variables advancing from 12 to 12.16666698456 No-substepping time integration at level 0 to 12.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 12 to 12.16666698456 with dt = 0.1666669845581 using RHS created at 12 Making slow rhs at time 12.16666698456 for fast variables advancing from 12 to 12.25 No-substepping time integration at level 0 to 12.25 with dt = 0.25 Time integration of scalars at level 0 from 12 to 12.25 with dt = 0.25 using RHS created at 12.16666698456 Making slow rhs at time 12.25 for fast variables advancing from 12 to 12.5 No-substepping time integration at level 0 to 12.5 with dt = 0.5 Time integration of scalars at level 0 from 12 to 12.5 with dt = 0.5 using RHS created at 12.25 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 48000 cells Coarse STEP 25 ends. TIME = 12.5 DT = 0.5 Timestep time = 0.034911915 seconds. TIME= 12.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Writing native checkpoint EkmanSpiral_restart_chk00025 Checkpoint write time = 0.023072811 seconds. Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666698456 No-substepping time integration at level 0 to 12.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 12.5 to 12.66666698456 with dt = 0.1666669845581 using RHS created at 12.5 Making slow rhs at time 12.66666698456 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666698456 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 48000 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.035467708 seconds. TIME= 13 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666698456 No-substepping time integration at level 0 to 13.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 13 to 13.16666698456 with dt = 0.1666669845581 using RHS created at 13 Making slow rhs at time 13.16666698456 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666698456 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 48000 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.034986866 seconds. TIME= 13.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666698456 No-substepping time integration at level 0 to 13.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 13.5 to 13.66666698456 with dt = 0.1666669845581 using RHS created at 13.5 Making slow rhs at time 13.66666698456 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666698456 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 48000 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.035165991 seconds. TIME= 14 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666698456 No-substepping time integration at level 0 to 14.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 14 to 14.16666698456 with dt = 0.1666669845581 using RHS created at 14 Making slow rhs at time 14.16666698456 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666698456 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 48000 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.035426853 seconds. TIME= 14.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666698456 No-substepping time integration at level 0 to 14.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 14.5 to 14.66666698456 with dt = 0.1666669845581 using RHS created at 14.5 Making slow rhs at time 14.66666698456 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666698456 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 48000 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.034854544 seconds. TIME= 15 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666698456 No-substepping time integration at level 0 to 15.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 15 to 15.16666698456 with dt = 0.1666669845581 using RHS created at 15 Making slow rhs at time 15.16666698456 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666698456 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 48000 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.034965859 seconds. TIME= 15.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666698456 No-substepping time integration at level 0 to 15.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 15.5 to 15.66666698456 with dt = 0.1666669845581 using RHS created at 15.5 Making slow rhs at time 15.66666698456 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666698456 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 48000 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.035331503 seconds. TIME= 16 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666603088 No-substepping time integration at level 0 to 16.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 16 to 16.16666603088 with dt = 0.1666660308838 using RHS created at 16 Making slow rhs at time 16.16666603088 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666603088 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 48000 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.035164509 seconds. TIME= 16.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666603088 No-substepping time integration at level 0 to 16.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 16.5 to 16.66666603088 with dt = 0.1666660308838 using RHS created at 16.5 Making slow rhs at time 16.66666603088 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666603088 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 48000 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.035197984 seconds. TIME= 17 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666603088 No-substepping time integration at level 0 to 17.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 17 to 17.16666603088 with dt = 0.1666660308838 using RHS created at 17 Making slow rhs at time 17.16666603088 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666603088 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 48000 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.034952521 seconds. TIME= 17.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666603088 No-substepping time integration at level 0 to 17.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 17.5 to 17.66666603088 with dt = 0.1666660308838 using RHS created at 17.5 Making slow rhs at time 17.66666603088 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666603088 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 48000 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.035144254 seconds. TIME= 18 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666603088 No-substepping time integration at level 0 to 18.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 18 to 18.16666603088 with dt = 0.1666660308838 using RHS created at 18 Making slow rhs at time 18.16666603088 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666603088 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 48000 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.035190778 seconds. TIME= 18.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666603088 No-substepping time integration at level 0 to 18.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 18.5 to 18.66666603088 with dt = 0.1666660308838 using RHS created at 18.5 Making slow rhs at time 18.66666603088 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666603088 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 48000 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.035037004 seconds. TIME= 19 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666603088 No-substepping time integration at level 0 to 19.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 19 to 19.16666603088 with dt = 0.1666660308838 using RHS created at 19 Making slow rhs at time 19.16666603088 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666603088 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 48000 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.034886719 seconds. TIME= 19.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666603088 No-substepping time integration at level 0 to 19.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 19.5 to 19.66666603088 with dt = 0.1666660308838 using RHS created at 19.5 Making slow rhs at time 19.66666603088 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666603088 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 48000 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.035303235 seconds. TIME= 20 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666603088 No-substepping time integration at level 0 to 20.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 20 to 20.16666603088 with dt = 0.1666660308838 using RHS created at 20 Making slow rhs at time 20.16666603088 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666603088 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 48000 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.035553895 seconds. TIME= 20.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666603088 No-substepping time integration at level 0 to 20.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 20.5 to 20.66666603088 with dt = 0.1666660308838 using RHS created at 20.5 Making slow rhs at time 20.66666603088 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666603088 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 48000 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.035492109 seconds. TIME= 21 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666603088 No-substepping time integration at level 0 to 21.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 21 to 21.16666603088 with dt = 0.1666660308838 using RHS created at 21 Making slow rhs at time 21.16666603088 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666603088 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 48000 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.035729064 seconds. TIME= 21.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666603088 No-substepping time integration at level 0 to 21.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 21.5 to 21.66666603088 with dt = 0.1666660308838 using RHS created at 21.5 Making slow rhs at time 21.66666603088 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666603088 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 48000 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.035021898 seconds. TIME= 22 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666603088 No-substepping time integration at level 0 to 22.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 22 to 22.16666603088 with dt = 0.1666660308838 using RHS created at 22 Making slow rhs at time 22.16666603088 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666603088 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 48000 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.035431892 seconds. TIME= 22.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666603088 No-substepping time integration at level 0 to 22.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 22.5 to 22.66666603088 with dt = 0.1666660308838 using RHS created at 22.5 Making slow rhs at time 22.66666603088 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666603088 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 48000 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.035227416 seconds. TIME= 23 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666603088 No-substepping time integration at level 0 to 23.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 23 to 23.16666603088 with dt = 0.1666660308838 using RHS created at 23 Making slow rhs at time 23.16666603088 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666603088 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 48000 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.035180539 seconds. TIME= 23.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666603088 No-substepping time integration at level 0 to 23.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 23.5 to 23.66666603088 with dt = 0.1666660308838 using RHS created at 23.5 Making slow rhs at time 23.66666603088 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666603088 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 48000 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.035245912 seconds. TIME= 24 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666603088 No-substepping time integration at level 0 to 24.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 24 to 24.16666603088 with dt = 0.1666660308838 using RHS created at 24 Making slow rhs at time 24.16666603088 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666603088 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 48000 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.035597476 seconds. TIME= 24.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666603088 No-substepping time integration at level 0 to 24.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 24.5 to 24.66666603088 with dt = 0.1666660308838 using RHS created at 24.5 Making slow rhs at time 24.66666603088 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666603088 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 48000 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.035403335 seconds. TIME= 25 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Writing native checkpoint EkmanSpiral_restart_chk00050 Checkpoint write time = 0.023626684 seconds. Writing native 3D plotfile EkmanSpiral_restart_plt00050 3DPlotfile write time = 0.02538392 seconds. Total Time: 1.944272161 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [1] AMReX (26.05-41-gba3cb0c68650) finalized Initializing AMReX (26.05-41-gba3cb0c68650)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.05-41-gba3cb0c68650) initialized Successfully read inputs file ... ERF git hash: 9c8926bb-dirty AMReX git hash: 26.05-41-gba3cb0c686 Problem name (from inputs file) is: "Ekman Spiral" Coriolis frequency, f = 0.0001458423212 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.002187634818,9.562455688e-11) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Restart from native checkpoint EkmanSpiral_restart_chk00025 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (7,5,399) (0,0,0)) ((8,0,0) (11,5,399) (0,0,0)) ((0,6,0) (7,9,399) (0,0,0)) ((8,6,0) (11,9,399) (0,0,0)) ) Reading LMASK data Restart time = 0.04191788 seconds. smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.00800000038 Writing native 3D plotfile EkmanSpiral_restart_plt00025 3DPlotfile write time = 0.019399967 seconds. TIME= 12.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666698456 No-substepping time integration at level 0 to 12.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 12.5 to 12.66666698456 with dt = 0.1666669845581 using RHS created at 12.5 Making slow rhs at time 12.66666698456 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666698456 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 48000 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.049399974 seconds. TIME= 13 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666698456 No-substepping time integration at level 0 to 13.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 13 to 13.16666698456 with dt = 0.1666669845581 using RHS created at 13 Making slow rhs at time 13.16666698456 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666698456 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 48000 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.036005728 seconds. TIME= 13.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666698456 No-substepping time integration at level 0 to 13.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 13.5 to 13.66666698456 with dt = 0.1666669845581 using RHS created at 13.5 Making slow rhs at time 13.66666698456 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666698456 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 48000 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.035887849 seconds. TIME= 14 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666698456 No-substepping time integration at level 0 to 14.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 14 to 14.16666698456 with dt = 0.1666669845581 using RHS created at 14 Making slow rhs at time 14.16666698456 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666698456 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 48000 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.035274135 seconds. TIME= 14.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666698456 No-substepping time integration at level 0 to 14.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 14.5 to 14.66666698456 with dt = 0.1666669845581 using RHS created at 14.5 Making slow rhs at time 14.66666698456 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666698456 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 48000 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.036476054 seconds. TIME= 15 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666698456 No-substepping time integration at level 0 to 15.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 15 to 15.16666698456 with dt = 0.1666669845581 using RHS created at 15 Making slow rhs at time 15.16666698456 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666698456 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 48000 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.036112684 seconds. TIME= 15.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666698456 No-substepping time integration at level 0 to 15.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 15.5 to 15.66666698456 with dt = 0.1666669845581 using RHS created at 15.5 Making slow rhs at time 15.66666698456 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666698456 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 48000 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.035678978 seconds. TIME= 16 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666603088 No-substepping time integration at level 0 to 16.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 16 to 16.16666603088 with dt = 0.1666660308838 using RHS created at 16 Making slow rhs at time 16.16666603088 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666603088 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 48000 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.036286726 seconds. TIME= 16.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666603088 No-substepping time integration at level 0 to 16.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 16.5 to 16.66666603088 with dt = 0.1666660308838 using RHS created at 16.5 Making slow rhs at time 16.66666603088 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666603088 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 48000 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.035653317 seconds. TIME= 17 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666603088 No-substepping time integration at level 0 to 17.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 17 to 17.16666603088 with dt = 0.1666660308838 using RHS created at 17 Making slow rhs at time 17.16666603088 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666603088 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 48000 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.035936888 seconds. TIME= 17.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666603088 No-substepping time integration at level 0 to 17.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 17.5 to 17.66666603088 with dt = 0.1666660308838 using RHS created at 17.5 Making slow rhs at time 17.66666603088 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666603088 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 48000 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.037035896 seconds. TIME= 18 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666603088 No-substepping time integration at level 0 to 18.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 18 to 18.16666603088 with dt = 0.1666660308838 using RHS created at 18 Making slow rhs at time 18.16666603088 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666603088 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 48000 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.036110671 seconds. TIME= 18.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666603088 No-substepping time integration at level 0 to 18.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 18.5 to 18.66666603088 with dt = 0.1666660308838 using RHS created at 18.5 Making slow rhs at time 18.66666603088 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666603088 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 48000 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.035798009 seconds. TIME= 19 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666603088 No-substepping time integration at level 0 to 19.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 19 to 19.16666603088 with dt = 0.1666660308838 using RHS created at 19 Making slow rhs at time 19.16666603088 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666603088 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 48000 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.036092614 seconds. TIME= 19.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666603088 No-substepping time integration at level 0 to 19.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 19.5 to 19.66666603088 with dt = 0.1666660308838 using RHS created at 19.5 Making slow rhs at time 19.66666603088 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666603088 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 48000 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.035293208 seconds. TIME= 20 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666603088 No-substepping time integration at level 0 to 20.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 20 to 20.16666603088 with dt = 0.1666660308838 using RHS created at 20 Making slow rhs at time 20.16666603088 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666603088 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 48000 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.036114309 seconds. TIME= 20.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666603088 No-substepping time integration at level 0 to 20.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 20.5 to 20.66666603088 with dt = 0.1666660308838 using RHS created at 20.5 Making slow rhs at time 20.66666603088 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666603088 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 48000 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.035691344 seconds. TIME= 21 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666603088 No-substepping time integration at level 0 to 21.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 21 to 21.16666603088 with dt = 0.1666660308838 using RHS created at 21 Making slow rhs at time 21.16666603088 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666603088 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 48000 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.035709378 seconds. TIME= 21.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666603088 No-substepping time integration at level 0 to 21.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 21.5 to 21.66666603088 with dt = 0.1666660308838 using RHS created at 21.5 Making slow rhs at time 21.66666603088 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666603088 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 48000 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.036047925 seconds. TIME= 22 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666603088 No-substepping time integration at level 0 to 22.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 22 to 22.16666603088 with dt = 0.1666660308838 using RHS created at 22 Making slow rhs at time 22.16666603088 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666603088 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 48000 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.036184553 seconds. TIME= 22.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666603088 No-substepping time integration at level 0 to 22.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 22.5 to 22.66666603088 with dt = 0.1666660308838 using RHS created at 22.5 Making slow rhs at time 22.66666603088 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666603088 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 48000 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.036361328 seconds. TIME= 23 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666603088 No-substepping time integration at level 0 to 23.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 23 to 23.16666603088 with dt = 0.1666660308838 using RHS created at 23 Making slow rhs at time 23.16666603088 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666603088 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 48000 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.036386442 seconds. TIME= 23.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666603088 No-substepping time integration at level 0 to 23.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 23.5 to 23.66666603088 with dt = 0.1666660308838 using RHS created at 23.5 Making slow rhs at time 23.66666603088 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666603088 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 48000 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.035917357 seconds. TIME= 24 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666603088 No-substepping time integration at level 0 to 24.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 24 to 24.16666603088 with dt = 0.1666660308838 using RHS created at 24 Making slow rhs at time 24.16666603088 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666603088 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 48000 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.035880644 seconds. TIME= 24.5 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666603088 No-substepping time integration at level 0 to 24.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 24.5 to 24.66666603088 with dt = 0.1666660308838 using RHS created at 24.5 Making slow rhs at time 24.66666603088 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666603088 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 48000 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.036900372 seconds. TIME= 25 MASS = 93750000 RHO THETA = 2.812499968e+10 RHO SCALAR = 0 Writing native 3D plotfile EkmanSpiral_restart_plt00050 3DPlotfile write time = 0.108880857 seconds. Writing native checkpoint EkmanSpiral_restart_chk00050 Checkpoint write time = 0.106954087 seconds. Total Time: 1.143945098 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] AMReX (26.05-41-gba3cb0c68650) finalized