Initializing AMReX (26.05-41-gba3cb0c68650)...
MPI initialized with 4 MPI processes
MPI initialized with thread support level 0
AMReX (26.05-41-gba3cb0c68650) initialized
Successfully read inputs file ... 

ERF git hash: 5f789d13
AMReX git hash: 26.05-41-gba3cb0c686

Problem name (from inputs file) is:  "Density Current" 
Using constant kinematic diffusion coefficients
  momentum : 75 m^2/s
  temperature : 75 m^2/s
  scalar : 0 m^2/s
Thermal stratification based on gradient of potential temperature
Thermal stratification based on gradient of potential temperature
Maximum simulation length based on stop_time: 900 s (elapsed) 
 Adding stop time 900 to start_time 0
Null land surface model!
SOLVER CHOICE: 
At level 0 : 
   compressible with implicit substepping
At level 1 : 
   anelastic with no substepping
   and fixed density
vert_implicit_fac           : 0 0 0
use_coriolis                : 0
use_gravity                 : 1
Moisture Model: None
Terrain Type: StaticFittedMesh
Buildings Type: None
   Mesh Type: StretchedDz
ABL Driver Type: 
    None
Coupling Type: 
    One-way
Radiation Model: None
Gradp_type                  : 0
Buoyancy_type at level 0 : 2
Buoyancy_type at level 1 : 3
Advection Choices: 
    dycore_horiz_adv_type   : Upwind_3rd
    dycore_vert_adv_type    : Upwind_3rd
   dryscal_horiz_adv_type   : Upwind_3rd
   dryscal_vert_adv_type    : Upwind_3rd
 moistscal_horiz_adv_type   : WENO3
 moistscal_vert_adv_type    : WENO3
Diffusion choices: 
    rho0_trans              : 1
    alpha_T                 : 75
    alpha_C                 : 0
    dynamic_viscosity       : 75
Sponge choices: 
Rayleigh damping            : None
w damping                   : 0 (coeff = -1 * dz/dt**2)
Turbulence Settings at level 0
    Using DNS model at level 0
Turbulence Settings at level 1
    Using DNS model at level 1
Refinement ratio at level 1 set to be 2 1 2
Creating new distribution map on level: 0
BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4)
       m_ref->m_hash_sig(0)
       ((0,0,0) (63,0,63) (0,0,0)) ((64,0,0) (127,0,63) (0,0,0)) ((128,0,0) (191,0,63) (0,0,0)) ((192,0,0) (255,0,63) (0,0,0)) )

max of zphys_nd 6400
max of zlevels  6400
Problem name "density current" does not add any velocity perturbations.