Initializing AMReX (26.05-41-gba3cb0c68650)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.05-41-gba3cb0c68650) initialized Successfully read inputs file ... ERF git hash: 5f789d13 AMReX git hash: 26.05-41-gba3cb0c686 Problem name (from inputs file) is: "Ekman Spiral" Coriolis frequency, f = 0.0001458423212 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac : 0 0 0 use_coriolis : 1 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: Geostrophic Wind (-0,0.002187634818,9.562455688e-11) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (1,1,399) (0,0,0)) ((2,0,0) (3,1,399) (0,0,0)) ((0,2,0) (1,3,399) (0,0,0)) ((2,2,0) (3,3,399) (0,0,0)) ) max of zphys_nd 5000 max of zlevels 5000 Problem name "ekman spiral" does not add any state perturbations. Problem name "ekman spiral" does not add any velocity perturbations. Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 smallest grid spacing at level 0 = 12.5 dt at level 0 = 0.5 Viscous CFL is 0.00800000038 Writing native checkpoint EkmanSpiral_custom_chk00000 Checkpoint write time = 0.023090745 seconds. Writing native 3D plotfile EkmanSpiral_custom_plt00000 3DPlotfile write time = 0.022857025 seconds. TIME= 0 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.5 with dt = 0.5 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1666666716337 No-substepping time integration at level 0 to 0.1666666716337 with dt = 0.1666666716337 Time integration of scalars at level 0 from 0 to 0.1666666716337 with dt = 0.1666666716337 using RHS created at 0 Making slow rhs at time 0.1666666716337 for fast variables advancing from 0 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.25 Time integration of scalars at level 0 from 0 to 0.25 with dt = 0.25 using RHS created at 0.1666666716337 Making slow rhs at time 0.25 for fast variables advancing from 0 to 0.5 No-substepping time integration at level 0 to 0.5 with dt = 0.5 Time integration of scalars at level 0 from 0 to 0.5 with dt = 0.5 using RHS created at 0.25 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 6400 cells Coarse STEP 1 ends. TIME = 0.5 DT = 0.5 Timestep time = 0.01402933 seconds. TIME= 0.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 2] ADVANCE from elapsed time = 0.5 to 1 with dt = 0.5 Making slow rhs at time 0.5 for fast variables advancing from 0.5 to 0.6666666865349 No-substepping time integration at level 0 to 0.6666666865349 with dt = 0.1666666716337 Time integration of scalars at level 0 from 0.5 to 0.6666666865349 with dt = 0.1666666865349 using RHS created at 0.5 Making slow rhs at time 0.6666666865349 for fast variables advancing from 0.5 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.25 Time integration of scalars at level 0 from 0.5 to 0.75 with dt = 0.25 using RHS created at 0.6666666865349 Making slow rhs at time 0.75 for fast variables advancing from 0.5 to 1 No-substepping time integration at level 0 to 1 with dt = 0.5 Time integration of scalars at level 0 from 0.5 to 1 with dt = 0.5 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 6400 cells Coarse STEP 2 ends. TIME = 1 DT = 0.5 Timestep time = 0.013276909 seconds. TIME= 1 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 3] ADVANCE from elapsed time = 1 to 1.5 with dt = 0.5 Making slow rhs at time 1 for fast variables advancing from 1 to 1.16666662693 No-substepping time integration at level 0 to 1.16666662693 with dt = 0.1666666716337 Time integration of scalars at level 0 from 1 to 1.16666662693 with dt = 0.1666666269302 using RHS created at 1 Making slow rhs at time 1.16666662693 for fast variables advancing from 1 to 1.25 No-substepping time integration at level 0 to 1.25 with dt = 0.25 Time integration of scalars at level 0 from 1 to 1.25 with dt = 0.25 using RHS created at 1.16666662693 Making slow rhs at time 1.25 for fast variables advancing from 1 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.5 Time integration of scalars at level 0 from 1 to 1.5 with dt = 0.5 using RHS created at 1.25 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 6400 cells Coarse STEP 3 ends. TIME = 1.5 DT = 0.5 Timestep time = 0.013460367 seconds. TIME= 1.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 4] ADVANCE from elapsed time = 1.5 to 2 with dt = 0.5 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.66666662693 No-substepping time integration at level 0 to 1.66666662693 with dt = 0.1666666716337 Time integration of scalars at level 0 from 1.5 to 1.66666662693 with dt = 0.1666666269302 using RHS created at 1.5 Making slow rhs at time 1.66666662693 for fast variables advancing from 1.5 to 1.75 No-substepping time integration at level 0 to 1.75 with dt = 0.25 Time integration of scalars at level 0 from 1.5 to 1.75 with dt = 0.25 using RHS created at 1.66666662693 Making slow rhs at time 1.75 for fast variables advancing from 1.5 to 2 No-substepping time integration at level 0 to 2 with dt = 0.5 Time integration of scalars at level 0 from 1.5 to 2 with dt = 0.5 using RHS created at 1.75 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 6400 cells Coarse STEP 4 ends. TIME = 2 DT = 0.5 Timestep time = 0.013729551 seconds. TIME= 2 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 5] ADVANCE from elapsed time = 2 to 2.5 with dt = 0.5 Making slow rhs at time 2 for fast variables advancing from 2 to 2.16666674614 No-substepping time integration at level 0 to 2.16666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 2 to 2.16666674614 with dt = 0.1666667461395 using RHS created at 2 Making slow rhs at time 2.16666674614 for fast variables advancing from 2 to 2.25 No-substepping time integration at level 0 to 2.25 with dt = 0.25 Time integration of scalars at level 0 from 2 to 2.25 with dt = 0.25 using RHS created at 2.16666674614 Making slow rhs at time 2.25 for fast variables advancing from 2 to 2.5 No-substepping time integration at level 0 to 2.5 with dt = 0.5 Time integration of scalars at level 0 from 2 to 2.5 with dt = 0.5 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 6400 cells Coarse STEP 5 ends. TIME = 2.5 DT = 0.5 Timestep time = 0.013676403 seconds. TIME= 2.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 6] ADVANCE from elapsed time = 2.5 to 3 with dt = 0.5 Making slow rhs at time 2.5 for fast variables advancing from 2.5 to 2.66666674614 No-substepping time integration at level 0 to 2.66666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 2.5 to 2.66666674614 with dt = 0.1666667461395 using RHS created at 2.5 Making slow rhs at time 2.66666674614 for fast variables advancing from 2.5 to 2.75 No-substepping time integration at level 0 to 2.75 with dt = 0.25 Time integration of scalars at level 0 from 2.5 to 2.75 with dt = 0.25 using RHS created at 2.66666674614 Making slow rhs at time 2.75 for fast variables advancing from 2.5 to 3 No-substepping time integration at level 0 to 3 with dt = 0.5 Time integration of scalars at level 0 from 2.5 to 3 with dt = 0.5 using RHS created at 2.75 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 6400 cells Coarse STEP 6 ends. TIME = 3 DT = 0.5 Timestep time = 0.013723555 seconds. TIME= 3 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 7] ADVANCE from elapsed time = 3 to 3.5 with dt = 0.5 Making slow rhs at time 3 for fast variables advancing from 3 to 3.16666674614 No-substepping time integration at level 0 to 3.16666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 3 to 3.16666674614 with dt = 0.1666667461395 using RHS created at 3 Making slow rhs at time 3.16666674614 for fast variables advancing from 3 to 3.25 No-substepping time integration at level 0 to 3.25 with dt = 0.25 Time integration of scalars at level 0 from 3 to 3.25 with dt = 0.25 using RHS created at 3.16666674614 Making slow rhs at time 3.25 for fast variables advancing from 3 to 3.5 No-substepping time integration at level 0 to 3.5 with dt = 0.5 Time integration of scalars at level 0 from 3 to 3.5 with dt = 0.5 using RHS created at 3.25 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 6400 cells Coarse STEP 7 ends. TIME = 3.5 DT = 0.5 Timestep time = 0.013459151 seconds. TIME= 3.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 8] ADVANCE from elapsed time = 3.5 to 4 with dt = 0.5 Making slow rhs at time 3.5 for fast variables advancing from 3.5 to 3.66666674614 No-substepping time integration at level 0 to 3.66666674614 with dt = 0.1666666716337 Time integration of scalars at level 0 from 3.5 to 3.66666674614 with dt = 0.1666667461395 using RHS created at 3.5 Making slow rhs at time 3.66666674614 for fast variables advancing from 3.5 to 3.75 No-substepping time integration at level 0 to 3.75 with dt = 0.25 Time integration of scalars at level 0 from 3.5 to 3.75 with dt = 0.25 using RHS created at 3.66666674614 Making slow rhs at time 3.75 for fast variables advancing from 3.5 to 4 No-substepping time integration at level 0 to 4 with dt = 0.5 Time integration of scalars at level 0 from 3.5 to 4 with dt = 0.5 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 6400 cells Coarse STEP 8 ends. TIME = 4 DT = 0.5 Timestep time = 0.013578247 seconds. TIME= 4 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 9] ADVANCE from elapsed time = 4 to 4.5 with dt = 0.5 Making slow rhs at time 4 for fast variables advancing from 4 to 4.166666507721 No-substepping time integration at level 0 to 4.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 4 to 4.166666507721 with dt = 0.1666665077209 using RHS created at 4 Making slow rhs at time 4.166666507721 for fast variables advancing from 4 to 4.25 No-substepping time integration at level 0 to 4.25 with dt = 0.25 Time integration of scalars at level 0 from 4 to 4.25 with dt = 0.25 using RHS created at 4.166666507721 Making slow rhs at time 4.25 for fast variables advancing from 4 to 4.5 No-substepping time integration at level 0 to 4.5 with dt = 0.5 Time integration of scalars at level 0 from 4 to 4.5 with dt = 0.5 using RHS created at 4.25 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 6400 cells Coarse STEP 9 ends. TIME = 4.5 DT = 0.5 Timestep time = 0.013633062 seconds. TIME= 4.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 10] ADVANCE from elapsed time = 4.5 to 5 with dt = 0.5 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.666666507721 No-substepping time integration at level 0 to 4.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 4.5 to 4.666666507721 with dt = 0.1666665077209 using RHS created at 4.5 Making slow rhs at time 4.666666507721 for fast variables advancing from 4.5 to 4.75 No-substepping time integration at level 0 to 4.75 with dt = 0.25 Time integration of scalars at level 0 from 4.5 to 4.75 with dt = 0.25 using RHS created at 4.666666507721 Making slow rhs at time 4.75 for fast variables advancing from 4.5 to 5 No-substepping time integration at level 0 to 5 with dt = 0.5 Time integration of scalars at level 0 from 4.5 to 5 with dt = 0.5 using RHS created at 4.75 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 6400 cells Coarse STEP 10 ends. TIME = 5 DT = 0.5 Timestep time = 0.013912605 seconds. TIME= 5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 11] ADVANCE from elapsed time = 5 to 5.5 with dt = 0.5 Making slow rhs at time 5 for fast variables advancing from 5 to 5.166666507721 No-substepping time integration at level 0 to 5.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 5 to 5.166666507721 with dt = 0.1666665077209 using RHS created at 5 Making slow rhs at time 5.166666507721 for fast variables advancing from 5 to 5.25 No-substepping time integration at level 0 to 5.25 with dt = 0.25 Time integration of scalars at level 0 from 5 to 5.25 with dt = 0.25 using RHS created at 5.166666507721 Making slow rhs at time 5.25 for fast variables advancing from 5 to 5.5 No-substepping time integration at level 0 to 5.5 with dt = 0.5 Time integration of scalars at level 0 from 5 to 5.5 with dt = 0.5 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 6400 cells Coarse STEP 11 ends. TIME = 5.5 DT = 0.5 Timestep time = 0.01366598 seconds. TIME= 5.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 12] ADVANCE from elapsed time = 5.5 to 6 with dt = 0.5 Making slow rhs at time 5.5 for fast variables advancing from 5.5 to 5.666666507721 No-substepping time integration at level 0 to 5.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 5.5 to 5.666666507721 with dt = 0.1666665077209 using RHS created at 5.5 Making slow rhs at time 5.666666507721 for fast variables advancing from 5.5 to 5.75 No-substepping time integration at level 0 to 5.75 with dt = 0.25 Time integration of scalars at level 0 from 5.5 to 5.75 with dt = 0.25 using RHS created at 5.666666507721 Making slow rhs at time 5.75 for fast variables advancing from 5.5 to 6 No-substepping time integration at level 0 to 6 with dt = 0.5 Time integration of scalars at level 0 from 5.5 to 6 with dt = 0.5 using RHS created at 5.75 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 6400 cells Coarse STEP 12 ends. TIME = 6 DT = 0.5 Timestep time = 0.013658954 seconds. TIME= 6 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 13] ADVANCE from elapsed time = 6 to 6.5 with dt = 0.5 Making slow rhs at time 6 for fast variables advancing from 6 to 6.166666507721 No-substepping time integration at level 0 to 6.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 6 to 6.166666507721 with dt = 0.1666665077209 using RHS created at 6 Making slow rhs at time 6.166666507721 for fast variables advancing from 6 to 6.25 No-substepping time integration at level 0 to 6.25 with dt = 0.25 Time integration of scalars at level 0 from 6 to 6.25 with dt = 0.25 using RHS created at 6.166666507721 Making slow rhs at time 6.25 for fast variables advancing from 6 to 6.5 No-substepping time integration at level 0 to 6.5 with dt = 0.5 Time integration of scalars at level 0 from 6 to 6.5 with dt = 0.5 using RHS created at 6.25 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 6400 cells Coarse STEP 13 ends. TIME = 6.5 DT = 0.5 Timestep time = 0.013500466 seconds. TIME= 6.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 14] ADVANCE from elapsed time = 6.5 to 7 with dt = 0.5 Making slow rhs at time 6.5 for fast variables advancing from 6.5 to 6.666666507721 No-substepping time integration at level 0 to 6.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 6.5 to 6.666666507721 with dt = 0.1666665077209 using RHS created at 6.5 Making slow rhs at time 6.666666507721 for fast variables advancing from 6.5 to 6.75 No-substepping time integration at level 0 to 6.75 with dt = 0.25 Time integration of scalars at level 0 from 6.5 to 6.75 with dt = 0.25 using RHS created at 6.666666507721 Making slow rhs at time 6.75 for fast variables advancing from 6.5 to 7 No-substepping time integration at level 0 to 7 with dt = 0.5 Time integration of scalars at level 0 from 6.5 to 7 with dt = 0.5 using RHS created at 6.75 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 6400 cells Coarse STEP 14 ends. TIME = 7 DT = 0.5 Timestep time = 0.013613614 seconds. TIME= 7 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 15] ADVANCE from elapsed time = 7 to 7.5 with dt = 0.5 Making slow rhs at time 7 for fast variables advancing from 7 to 7.166666507721 No-substepping time integration at level 0 to 7.166666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 7 to 7.166666507721 with dt = 0.1666665077209 using RHS created at 7 Making slow rhs at time 7.166666507721 for fast variables advancing from 7 to 7.25 No-substepping time integration at level 0 to 7.25 with dt = 0.25 Time integration of scalars at level 0 from 7 to 7.25 with dt = 0.25 using RHS created at 7.166666507721 Making slow rhs at time 7.25 for fast variables advancing from 7 to 7.5 No-substepping time integration at level 0 to 7.5 with dt = 0.5 Time integration of scalars at level 0 from 7 to 7.5 with dt = 0.5 using RHS created at 7.25 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 6400 cells Coarse STEP 15 ends. TIME = 7.5 DT = 0.5 Timestep time = 0.013636974 seconds. TIME= 7.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 16] ADVANCE from elapsed time = 7.5 to 8 with dt = 0.5 Making slow rhs at time 7.5 for fast variables advancing from 7.5 to 7.666666507721 No-substepping time integration at level 0 to 7.666666507721 with dt = 0.1666666716337 Time integration of scalars at level 0 from 7.5 to 7.666666507721 with dt = 0.1666665077209 using RHS created at 7.5 Making slow rhs at time 7.666666507721 for fast variables advancing from 7.5 to 7.75 No-substepping time integration at level 0 to 7.75 with dt = 0.25 Time integration of scalars at level 0 from 7.5 to 7.75 with dt = 0.25 using RHS created at 7.666666507721 Making slow rhs at time 7.75 for fast variables advancing from 7.5 to 8 No-substepping time integration at level 0 to 8 with dt = 0.5 Time integration of scalars at level 0 from 7.5 to 8 with dt = 0.5 using RHS created at 7.75 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 6400 cells Coarse STEP 16 ends. TIME = 8 DT = 0.5 Timestep time = 0.013685722 seconds. TIME= 8 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 17] ADVANCE from elapsed time = 8 to 8.5 with dt = 0.5 Making slow rhs at time 8 for fast variables advancing from 8 to 8.166666984558 No-substepping time integration at level 0 to 8.166666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 8 to 8.166666984558 with dt = 0.1666669845581 using RHS created at 8 Making slow rhs at time 8.166666984558 for fast variables advancing from 8 to 8.25 No-substepping time integration at level 0 to 8.25 with dt = 0.25 Time integration of scalars at level 0 from 8 to 8.25 with dt = 0.25 using RHS created at 8.166666984558 Making slow rhs at time 8.25 for fast variables advancing from 8 to 8.5 No-substepping time integration at level 0 to 8.5 with dt = 0.5 Time integration of scalars at level 0 from 8 to 8.5 with dt = 0.5 using RHS created at 8.25 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 6400 cells Coarse STEP 17 ends. TIME = 8.5 DT = 0.5 Timestep time = 0.013759442 seconds. TIME= 8.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 18] ADVANCE from elapsed time = 8.5 to 9 with dt = 0.5 Making slow rhs at time 8.5 for fast variables advancing from 8.5 to 8.666666984558 No-substepping time integration at level 0 to 8.666666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 8.5 to 8.666666984558 with dt = 0.1666669845581 using RHS created at 8.5 Making slow rhs at time 8.666666984558 for fast variables advancing from 8.5 to 8.75 No-substepping time integration at level 0 to 8.75 with dt = 0.25 Time integration of scalars at level 0 from 8.5 to 8.75 with dt = 0.25 using RHS created at 8.666666984558 Making slow rhs at time 8.75 for fast variables advancing from 8.5 to 9 No-substepping time integration at level 0 to 9 with dt = 0.5 Time integration of scalars at level 0 from 8.5 to 9 with dt = 0.5 using RHS created at 8.75 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 6400 cells Coarse STEP 18 ends. TIME = 9 DT = 0.5 Timestep time = 0.013769817 seconds. TIME= 9 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 19] ADVANCE from elapsed time = 9 to 9.5 with dt = 0.5 Making slow rhs at time 9 for fast variables advancing from 9 to 9.166666984558 No-substepping time integration at level 0 to 9.166666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 9 to 9.166666984558 with dt = 0.1666669845581 using RHS created at 9 Making slow rhs at time 9.166666984558 for fast variables advancing from 9 to 9.25 No-substepping time integration at level 0 to 9.25 with dt = 0.25 Time integration of scalars at level 0 from 9 to 9.25 with dt = 0.25 using RHS created at 9.166666984558 Making slow rhs at time 9.25 for fast variables advancing from 9 to 9.5 No-substepping time integration at level 0 to 9.5 with dt = 0.5 Time integration of scalars at level 0 from 9 to 9.5 with dt = 0.5 using RHS created at 9.25 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 6400 cells Coarse STEP 19 ends. TIME = 9.5 DT = 0.5 Timestep time = 0.01355094 seconds. TIME= 9.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 20] ADVANCE from elapsed time = 9.5 to 10 with dt = 0.5 Making slow rhs at time 9.5 for fast variables advancing from 9.5 to 9.666666984558 No-substepping time integration at level 0 to 9.666666984558 with dt = 0.1666666716337 Time integration of scalars at level 0 from 9.5 to 9.666666984558 with dt = 0.1666669845581 using RHS created at 9.5 Making slow rhs at time 9.666666984558 for fast variables advancing from 9.5 to 9.75 No-substepping time integration at level 0 to 9.75 with dt = 0.25 Time integration of scalars at level 0 from 9.5 to 9.75 with dt = 0.25 using RHS created at 9.666666984558 Making slow rhs at time 9.75 for fast variables advancing from 9.5 to 10 No-substepping time integration at level 0 to 10 with dt = 0.5 Time integration of scalars at level 0 from 9.5 to 10 with dt = 0.5 using RHS created at 9.75 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 6400 cells Coarse STEP 20 ends. TIME = 10 DT = 0.5 Timestep time = 0.013579316 seconds. TIME= 10 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 21] ADVANCE from elapsed time = 10 to 10.5 with dt = 0.5 Making slow rhs at time 10 for fast variables advancing from 10 to 10.16666698456 No-substepping time integration at level 0 to 10.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 10 to 10.16666698456 with dt = 0.1666669845581 using RHS created at 10 Making slow rhs at time 10.16666698456 for fast variables advancing from 10 to 10.25 No-substepping time integration at level 0 to 10.25 with dt = 0.25 Time integration of scalars at level 0 from 10 to 10.25 with dt = 0.25 using RHS created at 10.16666698456 Making slow rhs at time 10.25 for fast variables advancing from 10 to 10.5 No-substepping time integration at level 0 to 10.5 with dt = 0.5 Time integration of scalars at level 0 from 10 to 10.5 with dt = 0.5 using RHS created at 10.25 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 6400 cells Coarse STEP 21 ends. TIME = 10.5 DT = 0.5 Timestep time = 0.013708974 seconds. TIME= 10.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 22] ADVANCE from elapsed time = 10.5 to 11 with dt = 0.5 Making slow rhs at time 10.5 for fast variables advancing from 10.5 to 10.66666698456 No-substepping time integration at level 0 to 10.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 10.5 to 10.66666698456 with dt = 0.1666669845581 using RHS created at 10.5 Making slow rhs at time 10.66666698456 for fast variables advancing from 10.5 to 10.75 No-substepping time integration at level 0 to 10.75 with dt = 0.25 Time integration of scalars at level 0 from 10.5 to 10.75 with dt = 0.25 using RHS created at 10.66666698456 Making slow rhs at time 10.75 for fast variables advancing from 10.5 to 11 No-substepping time integration at level 0 to 11 with dt = 0.5 Time integration of scalars at level 0 from 10.5 to 11 with dt = 0.5 using RHS created at 10.75 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 6400 cells Coarse STEP 22 ends. TIME = 11 DT = 0.5 Timestep time = 0.0136747 seconds. TIME= 11 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 23] ADVANCE from elapsed time = 11 to 11.5 with dt = 0.5 Making slow rhs at time 11 for fast variables advancing from 11 to 11.16666698456 No-substepping time integration at level 0 to 11.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 11 to 11.16666698456 with dt = 0.1666669845581 using RHS created at 11 Making slow rhs at time 11.16666698456 for fast variables advancing from 11 to 11.25 No-substepping time integration at level 0 to 11.25 with dt = 0.25 Time integration of scalars at level 0 from 11 to 11.25 with dt = 0.25 using RHS created at 11.16666698456 Making slow rhs at time 11.25 for fast variables advancing from 11 to 11.5 No-substepping time integration at level 0 to 11.5 with dt = 0.5 Time integration of scalars at level 0 from 11 to 11.5 with dt = 0.5 using RHS created at 11.25 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 6400 cells Coarse STEP 23 ends. TIME = 11.5 DT = 0.5 Timestep time = 0.013695402 seconds. TIME= 11.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 24] ADVANCE from elapsed time = 11.5 to 12 with dt = 0.5 Making slow rhs at time 11.5 for fast variables advancing from 11.5 to 11.66666698456 No-substepping time integration at level 0 to 11.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 11.5 to 11.66666698456 with dt = 0.1666669845581 using RHS created at 11.5 Making slow rhs at time 11.66666698456 for fast variables advancing from 11.5 to 11.75 No-substepping time integration at level 0 to 11.75 with dt = 0.25 Time integration of scalars at level 0 from 11.5 to 11.75 with dt = 0.25 using RHS created at 11.66666698456 Making slow rhs at time 11.75 for fast variables advancing from 11.5 to 12 No-substepping time integration at level 0 to 12 with dt = 0.5 Time integration of scalars at level 0 from 11.5 to 12 with dt = 0.5 using RHS created at 11.75 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 6400 cells Coarse STEP 24 ends. TIME = 12 DT = 0.5 Timestep time = 0.013697349 seconds. TIME= 12 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 25] ADVANCE from elapsed time = 12 to 12.5 with dt = 0.5 Making slow rhs at time 12 for fast variables advancing from 12 to 12.16666698456 No-substepping time integration at level 0 to 12.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 12 to 12.16666698456 with dt = 0.1666669845581 using RHS created at 12 Making slow rhs at time 12.16666698456 for fast variables advancing from 12 to 12.25 No-substepping time integration at level 0 to 12.25 with dt = 0.25 Time integration of scalars at level 0 from 12 to 12.25 with dt = 0.25 using RHS created at 12.16666698456 Making slow rhs at time 12.25 for fast variables advancing from 12 to 12.5 No-substepping time integration at level 0 to 12.5 with dt = 0.5 Time integration of scalars at level 0 from 12 to 12.5 with dt = 0.5 using RHS created at 12.25 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 6400 cells Coarse STEP 25 ends. TIME = 12.5 DT = 0.5 Timestep time = 0.0133719 seconds. TIME= 12.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 26] ADVANCE from elapsed time = 12.5 to 13 with dt = 0.5 Making slow rhs at time 12.5 for fast variables advancing from 12.5 to 12.66666698456 No-substepping time integration at level 0 to 12.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 12.5 to 12.66666698456 with dt = 0.1666669845581 using RHS created at 12.5 Making slow rhs at time 12.66666698456 for fast variables advancing from 12.5 to 12.75 No-substepping time integration at level 0 to 12.75 with dt = 0.25 Time integration of scalars at level 0 from 12.5 to 12.75 with dt = 0.25 using RHS created at 12.66666698456 Making slow rhs at time 12.75 for fast variables advancing from 12.5 to 13 No-substepping time integration at level 0 to 13 with dt = 0.5 Time integration of scalars at level 0 from 12.5 to 13 with dt = 0.5 using RHS created at 12.75 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 6400 cells Coarse STEP 26 ends. TIME = 13 DT = 0.5 Timestep time = 0.013610324 seconds. TIME= 13 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 27] ADVANCE from elapsed time = 13 to 13.5 with dt = 0.5 Making slow rhs at time 13 for fast variables advancing from 13 to 13.16666698456 No-substepping time integration at level 0 to 13.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 13 to 13.16666698456 with dt = 0.1666669845581 using RHS created at 13 Making slow rhs at time 13.16666698456 for fast variables advancing from 13 to 13.25 No-substepping time integration at level 0 to 13.25 with dt = 0.25 Time integration of scalars at level 0 from 13 to 13.25 with dt = 0.25 using RHS created at 13.16666698456 Making slow rhs at time 13.25 for fast variables advancing from 13 to 13.5 No-substepping time integration at level 0 to 13.5 with dt = 0.5 Time integration of scalars at level 0 from 13 to 13.5 with dt = 0.5 using RHS created at 13.25 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 6400 cells Coarse STEP 27 ends. TIME = 13.5 DT = 0.5 Timestep time = 0.013740938 seconds. TIME= 13.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 28] ADVANCE from elapsed time = 13.5 to 14 with dt = 0.5 Making slow rhs at time 13.5 for fast variables advancing from 13.5 to 13.66666698456 No-substepping time integration at level 0 to 13.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 13.5 to 13.66666698456 with dt = 0.1666669845581 using RHS created at 13.5 Making slow rhs at time 13.66666698456 for fast variables advancing from 13.5 to 13.75 No-substepping time integration at level 0 to 13.75 with dt = 0.25 Time integration of scalars at level 0 from 13.5 to 13.75 with dt = 0.25 using RHS created at 13.66666698456 Making slow rhs at time 13.75 for fast variables advancing from 13.5 to 14 No-substepping time integration at level 0 to 14 with dt = 0.5 Time integration of scalars at level 0 from 13.5 to 14 with dt = 0.5 using RHS created at 13.75 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 6400 cells Coarse STEP 28 ends. TIME = 14 DT = 0.5 Timestep time = 0.013631181 seconds. TIME= 14 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 29] ADVANCE from elapsed time = 14 to 14.5 with dt = 0.5 Making slow rhs at time 14 for fast variables advancing from 14 to 14.16666698456 No-substepping time integration at level 0 to 14.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 14 to 14.16666698456 with dt = 0.1666669845581 using RHS created at 14 Making slow rhs at time 14.16666698456 for fast variables advancing from 14 to 14.25 No-substepping time integration at level 0 to 14.25 with dt = 0.25 Time integration of scalars at level 0 from 14 to 14.25 with dt = 0.25 using RHS created at 14.16666698456 Making slow rhs at time 14.25 for fast variables advancing from 14 to 14.5 No-substepping time integration at level 0 to 14.5 with dt = 0.5 Time integration of scalars at level 0 from 14 to 14.5 with dt = 0.5 using RHS created at 14.25 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 6400 cells Coarse STEP 29 ends. TIME = 14.5 DT = 0.5 Timestep time = 0.013603575 seconds. TIME= 14.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 30] ADVANCE from elapsed time = 14.5 to 15 with dt = 0.5 Making slow rhs at time 14.5 for fast variables advancing from 14.5 to 14.66666698456 No-substepping time integration at level 0 to 14.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 14.5 to 14.66666698456 with dt = 0.1666669845581 using RHS created at 14.5 Making slow rhs at time 14.66666698456 for fast variables advancing from 14.5 to 14.75 No-substepping time integration at level 0 to 14.75 with dt = 0.25 Time integration of scalars at level 0 from 14.5 to 14.75 with dt = 0.25 using RHS created at 14.66666698456 Making slow rhs at time 14.75 for fast variables advancing from 14.5 to 15 No-substepping time integration at level 0 to 15 with dt = 0.5 Time integration of scalars at level 0 from 14.5 to 15 with dt = 0.5 using RHS created at 14.75 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 6400 cells Coarse STEP 30 ends. TIME = 15 DT = 0.5 Timestep time = 0.013810226 seconds. TIME= 15 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 31] ADVANCE from elapsed time = 15 to 15.5 with dt = 0.5 Making slow rhs at time 15 for fast variables advancing from 15 to 15.16666698456 No-substepping time integration at level 0 to 15.16666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 15 to 15.16666698456 with dt = 0.1666669845581 using RHS created at 15 Making slow rhs at time 15.16666698456 for fast variables advancing from 15 to 15.25 No-substepping time integration at level 0 to 15.25 with dt = 0.25 Time integration of scalars at level 0 from 15 to 15.25 with dt = 0.25 using RHS created at 15.16666698456 Making slow rhs at time 15.25 for fast variables advancing from 15 to 15.5 No-substepping time integration at level 0 to 15.5 with dt = 0.5 Time integration of scalars at level 0 from 15 to 15.5 with dt = 0.5 using RHS created at 15.25 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 6400 cells Coarse STEP 31 ends. TIME = 15.5 DT = 0.5 Timestep time = 0.013494316 seconds. TIME= 15.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 32] ADVANCE from elapsed time = 15.5 to 16 with dt = 0.5 Making slow rhs at time 15.5 for fast variables advancing from 15.5 to 15.66666698456 No-substepping time integration at level 0 to 15.66666698456 with dt = 0.1666666716337 Time integration of scalars at level 0 from 15.5 to 15.66666698456 with dt = 0.1666669845581 using RHS created at 15.5 Making slow rhs at time 15.66666698456 for fast variables advancing from 15.5 to 15.75 No-substepping time integration at level 0 to 15.75 with dt = 0.25 Time integration of scalars at level 0 from 15.5 to 15.75 with dt = 0.25 using RHS created at 15.66666698456 Making slow rhs at time 15.75 for fast variables advancing from 15.5 to 16 No-substepping time integration at level 0 to 16 with dt = 0.5 Time integration of scalars at level 0 from 15.5 to 16 with dt = 0.5 using RHS created at 15.75 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 6400 cells Coarse STEP 32 ends. TIME = 16 DT = 0.5 Timestep time = 0.013683225 seconds. TIME= 16 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 33] ADVANCE from elapsed time = 16 to 16.5 with dt = 0.5 Making slow rhs at time 16 for fast variables advancing from 16 to 16.16666603088 No-substepping time integration at level 0 to 16.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 16 to 16.16666603088 with dt = 0.1666660308838 using RHS created at 16 Making slow rhs at time 16.16666603088 for fast variables advancing from 16 to 16.25 No-substepping time integration at level 0 to 16.25 with dt = 0.25 Time integration of scalars at level 0 from 16 to 16.25 with dt = 0.25 using RHS created at 16.16666603088 Making slow rhs at time 16.25 for fast variables advancing from 16 to 16.5 No-substepping time integration at level 0 to 16.5 with dt = 0.5 Time integration of scalars at level 0 from 16 to 16.5 with dt = 0.5 using RHS created at 16.25 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 6400 cells Coarse STEP 33 ends. TIME = 16.5 DT = 0.5 Timestep time = 0.013857907 seconds. TIME= 16.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 34] ADVANCE from elapsed time = 16.5 to 17 with dt = 0.5 Making slow rhs at time 16.5 for fast variables advancing from 16.5 to 16.66666603088 No-substepping time integration at level 0 to 16.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 16.5 to 16.66666603088 with dt = 0.1666660308838 using RHS created at 16.5 Making slow rhs at time 16.66666603088 for fast variables advancing from 16.5 to 16.75 No-substepping time integration at level 0 to 16.75 with dt = 0.25 Time integration of scalars at level 0 from 16.5 to 16.75 with dt = 0.25 using RHS created at 16.66666603088 Making slow rhs at time 16.75 for fast variables advancing from 16.5 to 17 No-substepping time integration at level 0 to 17 with dt = 0.5 Time integration of scalars at level 0 from 16.5 to 17 with dt = 0.5 using RHS created at 16.75 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 6400 cells Coarse STEP 34 ends. TIME = 17 DT = 0.5 Timestep time = 0.013748525 seconds. TIME= 17 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 35] ADVANCE from elapsed time = 17 to 17.5 with dt = 0.5 Making slow rhs at time 17 for fast variables advancing from 17 to 17.16666603088 No-substepping time integration at level 0 to 17.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 17 to 17.16666603088 with dt = 0.1666660308838 using RHS created at 17 Making slow rhs at time 17.16666603088 for fast variables advancing from 17 to 17.25 No-substepping time integration at level 0 to 17.25 with dt = 0.25 Time integration of scalars at level 0 from 17 to 17.25 with dt = 0.25 using RHS created at 17.16666603088 Making slow rhs at time 17.25 for fast variables advancing from 17 to 17.5 No-substepping time integration at level 0 to 17.5 with dt = 0.5 Time integration of scalars at level 0 from 17 to 17.5 with dt = 0.5 using RHS created at 17.25 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 6400 cells Coarse STEP 35 ends. TIME = 17.5 DT = 0.5 Timestep time = 0.013638379 seconds. TIME= 17.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 36] ADVANCE from elapsed time = 17.5 to 18 with dt = 0.5 Making slow rhs at time 17.5 for fast variables advancing from 17.5 to 17.66666603088 No-substepping time integration at level 0 to 17.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 17.5 to 17.66666603088 with dt = 0.1666660308838 using RHS created at 17.5 Making slow rhs at time 17.66666603088 for fast variables advancing from 17.5 to 17.75 No-substepping time integration at level 0 to 17.75 with dt = 0.25 Time integration of scalars at level 0 from 17.5 to 17.75 with dt = 0.25 using RHS created at 17.66666603088 Making slow rhs at time 17.75 for fast variables advancing from 17.5 to 18 No-substepping time integration at level 0 to 18 with dt = 0.5 Time integration of scalars at level 0 from 17.5 to 18 with dt = 0.5 using RHS created at 17.75 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 6400 cells Coarse STEP 36 ends. TIME = 18 DT = 0.5 Timestep time = 0.013702489 seconds. TIME= 18 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 37] ADVANCE from elapsed time = 18 to 18.5 with dt = 0.5 Making slow rhs at time 18 for fast variables advancing from 18 to 18.16666603088 No-substepping time integration at level 0 to 18.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 18 to 18.16666603088 with dt = 0.1666660308838 using RHS created at 18 Making slow rhs at time 18.16666603088 for fast variables advancing from 18 to 18.25 No-substepping time integration at level 0 to 18.25 with dt = 0.25 Time integration of scalars at level 0 from 18 to 18.25 with dt = 0.25 using RHS created at 18.16666603088 Making slow rhs at time 18.25 for fast variables advancing from 18 to 18.5 No-substepping time integration at level 0 to 18.5 with dt = 0.5 Time integration of scalars at level 0 from 18 to 18.5 with dt = 0.5 using RHS created at 18.25 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 6400 cells Coarse STEP 37 ends. TIME = 18.5 DT = 0.5 Timestep time = 0.013520261 seconds. TIME= 18.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 38] ADVANCE from elapsed time = 18.5 to 19 with dt = 0.5 Making slow rhs at time 18.5 for fast variables advancing from 18.5 to 18.66666603088 No-substepping time integration at level 0 to 18.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 18.5 to 18.66666603088 with dt = 0.1666660308838 using RHS created at 18.5 Making slow rhs at time 18.66666603088 for fast variables advancing from 18.5 to 18.75 No-substepping time integration at level 0 to 18.75 with dt = 0.25 Time integration of scalars at level 0 from 18.5 to 18.75 with dt = 0.25 using RHS created at 18.66666603088 Making slow rhs at time 18.75 for fast variables advancing from 18.5 to 19 No-substepping time integration at level 0 to 19 with dt = 0.5 Time integration of scalars at level 0 from 18.5 to 19 with dt = 0.5 using RHS created at 18.75 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 6400 cells Coarse STEP 38 ends. TIME = 19 DT = 0.5 Timestep time = 0.013598769 seconds. TIME= 19 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 39] ADVANCE from elapsed time = 19 to 19.5 with dt = 0.5 Making slow rhs at time 19 for fast variables advancing from 19 to 19.16666603088 No-substepping time integration at level 0 to 19.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 19 to 19.16666603088 with dt = 0.1666660308838 using RHS created at 19 Making slow rhs at time 19.16666603088 for fast variables advancing from 19 to 19.25 No-substepping time integration at level 0 to 19.25 with dt = 0.25 Time integration of scalars at level 0 from 19 to 19.25 with dt = 0.25 using RHS created at 19.16666603088 Making slow rhs at time 19.25 for fast variables advancing from 19 to 19.5 No-substepping time integration at level 0 to 19.5 with dt = 0.5 Time integration of scalars at level 0 from 19 to 19.5 with dt = 0.5 using RHS created at 19.25 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 6400 cells Coarse STEP 39 ends. TIME = 19.5 DT = 0.5 Timestep time = 0.013871799 seconds. TIME= 19.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 40] ADVANCE from elapsed time = 19.5 to 20 with dt = 0.5 Making slow rhs at time 19.5 for fast variables advancing from 19.5 to 19.66666603088 No-substepping time integration at level 0 to 19.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 19.5 to 19.66666603088 with dt = 0.1666660308838 using RHS created at 19.5 Making slow rhs at time 19.66666603088 for fast variables advancing from 19.5 to 19.75 No-substepping time integration at level 0 to 19.75 with dt = 0.25 Time integration of scalars at level 0 from 19.5 to 19.75 with dt = 0.25 using RHS created at 19.66666603088 Making slow rhs at time 19.75 for fast variables advancing from 19.5 to 20 No-substepping time integration at level 0 to 20 with dt = 0.5 Time integration of scalars at level 0 from 19.5 to 20 with dt = 0.5 using RHS created at 19.75 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 6400 cells Coarse STEP 40 ends. TIME = 20 DT = 0.5 Timestep time = 0.013729466 seconds. TIME= 20 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 41] ADVANCE from elapsed time = 20 to 20.5 with dt = 0.5 Making slow rhs at time 20 for fast variables advancing from 20 to 20.16666603088 No-substepping time integration at level 0 to 20.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 20 to 20.16666603088 with dt = 0.1666660308838 using RHS created at 20 Making slow rhs at time 20.16666603088 for fast variables advancing from 20 to 20.25 No-substepping time integration at level 0 to 20.25 with dt = 0.25 Time integration of scalars at level 0 from 20 to 20.25 with dt = 0.25 using RHS created at 20.16666603088 Making slow rhs at time 20.25 for fast variables advancing from 20 to 20.5 No-substepping time integration at level 0 to 20.5 with dt = 0.5 Time integration of scalars at level 0 from 20 to 20.5 with dt = 0.5 using RHS created at 20.25 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 6400 cells Coarse STEP 41 ends. TIME = 20.5 DT = 0.5 Timestep time = 0.013662341 seconds. TIME= 20.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 42] ADVANCE from elapsed time = 20.5 to 21 with dt = 0.5 Making slow rhs at time 20.5 for fast variables advancing from 20.5 to 20.66666603088 No-substepping time integration at level 0 to 20.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 20.5 to 20.66666603088 with dt = 0.1666660308838 using RHS created at 20.5 Making slow rhs at time 20.66666603088 for fast variables advancing from 20.5 to 20.75 No-substepping time integration at level 0 to 20.75 with dt = 0.25 Time integration of scalars at level 0 from 20.5 to 20.75 with dt = 0.25 using RHS created at 20.66666603088 Making slow rhs at time 20.75 for fast variables advancing from 20.5 to 21 No-substepping time integration at level 0 to 21 with dt = 0.5 Time integration of scalars at level 0 from 20.5 to 21 with dt = 0.5 using RHS created at 20.75 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 6400 cells Coarse STEP 42 ends. TIME = 21 DT = 0.5 Timestep time = 0.01350147 seconds. TIME= 21 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 43] ADVANCE from elapsed time = 21 to 21.5 with dt = 0.5 Making slow rhs at time 21 for fast variables advancing from 21 to 21.16666603088 No-substepping time integration at level 0 to 21.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 21 to 21.16666603088 with dt = 0.1666660308838 using RHS created at 21 Making slow rhs at time 21.16666603088 for fast variables advancing from 21 to 21.25 No-substepping time integration at level 0 to 21.25 with dt = 0.25 Time integration of scalars at level 0 from 21 to 21.25 with dt = 0.25 using RHS created at 21.16666603088 Making slow rhs at time 21.25 for fast variables advancing from 21 to 21.5 No-substepping time integration at level 0 to 21.5 with dt = 0.5 Time integration of scalars at level 0 from 21 to 21.5 with dt = 0.5 using RHS created at 21.25 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 6400 cells Coarse STEP 43 ends. TIME = 21.5 DT = 0.5 Timestep time = 0.01374139 seconds. TIME= 21.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 44] ADVANCE from elapsed time = 21.5 to 22 with dt = 0.5 Making slow rhs at time 21.5 for fast variables advancing from 21.5 to 21.66666603088 No-substepping time integration at level 0 to 21.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 21.5 to 21.66666603088 with dt = 0.1666660308838 using RHS created at 21.5 Making slow rhs at time 21.66666603088 for fast variables advancing from 21.5 to 21.75 No-substepping time integration at level 0 to 21.75 with dt = 0.25 Time integration of scalars at level 0 from 21.5 to 21.75 with dt = 0.25 using RHS created at 21.66666603088 Making slow rhs at time 21.75 for fast variables advancing from 21.5 to 22 No-substepping time integration at level 0 to 22 with dt = 0.5 Time integration of scalars at level 0 from 21.5 to 22 with dt = 0.5 using RHS created at 21.75 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 6400 cells Coarse STEP 44 ends. TIME = 22 DT = 0.5 Timestep time = 0.013612565 seconds. TIME= 22 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 45] ADVANCE from elapsed time = 22 to 22.5 with dt = 0.5 Making slow rhs at time 22 for fast variables advancing from 22 to 22.16666603088 No-substepping time integration at level 0 to 22.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 22 to 22.16666603088 with dt = 0.1666660308838 using RHS created at 22 Making slow rhs at time 22.16666603088 for fast variables advancing from 22 to 22.25 No-substepping time integration at level 0 to 22.25 with dt = 0.25 Time integration of scalars at level 0 from 22 to 22.25 with dt = 0.25 using RHS created at 22.16666603088 Making slow rhs at time 22.25 for fast variables advancing from 22 to 22.5 No-substepping time integration at level 0 to 22.5 with dt = 0.5 Time integration of scalars at level 0 from 22 to 22.5 with dt = 0.5 using RHS created at 22.25 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 6400 cells Coarse STEP 45 ends. TIME = 22.5 DT = 0.5 Timestep time = 0.013649905 seconds. TIME= 22.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 46] ADVANCE from elapsed time = 22.5 to 23 with dt = 0.5 Making slow rhs at time 22.5 for fast variables advancing from 22.5 to 22.66666603088 No-substepping time integration at level 0 to 22.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 22.5 to 22.66666603088 with dt = 0.1666660308838 using RHS created at 22.5 Making slow rhs at time 22.66666603088 for fast variables advancing from 22.5 to 22.75 No-substepping time integration at level 0 to 22.75 with dt = 0.25 Time integration of scalars at level 0 from 22.5 to 22.75 with dt = 0.25 using RHS created at 22.66666603088 Making slow rhs at time 22.75 for fast variables advancing from 22.5 to 23 No-substepping time integration at level 0 to 23 with dt = 0.5 Time integration of scalars at level 0 from 22.5 to 23 with dt = 0.5 using RHS created at 22.75 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 6400 cells Coarse STEP 46 ends. TIME = 23 DT = 0.5 Timestep time = 0.013833612 seconds. TIME= 23 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 47] ADVANCE from elapsed time = 23 to 23.5 with dt = 0.5 Making slow rhs at time 23 for fast variables advancing from 23 to 23.16666603088 No-substepping time integration at level 0 to 23.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 23 to 23.16666603088 with dt = 0.1666660308838 using RHS created at 23 Making slow rhs at time 23.16666603088 for fast variables advancing from 23 to 23.25 No-substepping time integration at level 0 to 23.25 with dt = 0.25 Time integration of scalars at level 0 from 23 to 23.25 with dt = 0.25 using RHS created at 23.16666603088 Making slow rhs at time 23.25 for fast variables advancing from 23 to 23.5 No-substepping time integration at level 0 to 23.5 with dt = 0.5 Time integration of scalars at level 0 from 23 to 23.5 with dt = 0.5 using RHS created at 23.25 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 6400 cells Coarse STEP 47 ends. TIME = 23.5 DT = 0.5 Timestep time = 0.013754824 seconds. TIME= 23.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 48] ADVANCE from elapsed time = 23.5 to 24 with dt = 0.5 Making slow rhs at time 23.5 for fast variables advancing from 23.5 to 23.66666603088 No-substepping time integration at level 0 to 23.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 23.5 to 23.66666603088 with dt = 0.1666660308838 using RHS created at 23.5 Making slow rhs at time 23.66666603088 for fast variables advancing from 23.5 to 23.75 No-substepping time integration at level 0 to 23.75 with dt = 0.25 Time integration of scalars at level 0 from 23.5 to 23.75 with dt = 0.25 using RHS created at 23.66666603088 Making slow rhs at time 23.75 for fast variables advancing from 23.5 to 24 No-substepping time integration at level 0 to 24 with dt = 0.5 Time integration of scalars at level 0 from 23.5 to 24 with dt = 0.5 using RHS created at 23.75 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 6400 cells Coarse STEP 48 ends. TIME = 24 DT = 0.5 Timestep time = 0.013541153 seconds. TIME= 24 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 49] ADVANCE from elapsed time = 24 to 24.5 with dt = 0.5 Making slow rhs at time 24 for fast variables advancing from 24 to 24.16666603088 No-substepping time integration at level 0 to 24.16666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 24 to 24.16666603088 with dt = 0.1666660308838 using RHS created at 24 Making slow rhs at time 24.16666603088 for fast variables advancing from 24 to 24.25 No-substepping time integration at level 0 to 24.25 with dt = 0.25 Time integration of scalars at level 0 from 24 to 24.25 with dt = 0.25 using RHS created at 24.16666603088 Making slow rhs at time 24.25 for fast variables advancing from 24 to 24.5 No-substepping time integration at level 0 to 24.5 with dt = 0.5 Time integration of scalars at level 0 from 24 to 24.5 with dt = 0.5 using RHS created at 24.25 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 6400 cells Coarse STEP 49 ends. TIME = 24.5 DT = 0.5 Timestep time = 0.013574243 seconds. TIME= 24.5 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.03541519493 Anelastic dt at level 0 would be: 0.7809937 Fixed dt at level 0 is: 0.5 [Level 0 step 50] ADVANCE from elapsed time = 24.5 to 25 with dt = 0.5 Making slow rhs at time 24.5 for fast variables advancing from 24.5 to 24.66666603088 No-substepping time integration at level 0 to 24.66666603088 with dt = 0.1666666716337 Time integration of scalars at level 0 from 24.5 to 24.66666603088 with dt = 0.1666660308838 using RHS created at 24.5 Making slow rhs at time 24.66666603088 for fast variables advancing from 24.5 to 24.75 No-substepping time integration at level 0 to 24.75 with dt = 0.25 Time integration of scalars at level 0 from 24.5 to 24.75 with dt = 0.25 using RHS created at 24.66666603088 Making slow rhs at time 24.75 for fast variables advancing from 24.5 to 25 No-substepping time integration at level 0 to 25 with dt = 0.5 Time integration of scalars at level 0 from 24.5 to 25 with dt = 0.5 using RHS created at 24.75 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 6400 cells Coarse STEP 50 ends. TIME = 25 DT = 0.5 Timestep time = 0.013628362 seconds. TIME= 25 MASS = 12500000 RHO THETA = 3750000128 RHO SCALAR = 0 Writing native 3D plotfile EkmanSpiral_custom_plt00050 3DPlotfile write time = 0.004514586 seconds. Writing native checkpoint EkmanSpiral_custom_chk00050 Checkpoint write time = 0.023685106 seconds. Total Time: 0.7686179876 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] AMReX (26.05-41-gba3cb0c68650) finalized