Initializing AMReX (26.06-15-g07311ca5127b)...
MPI initialized with 4 MPI processes
MPI initialized with thread support level 0
AMReX (26.06-15-g07311ca5127b) initialized
Successfully read inputs file ... 

ERF git hash: 339cea60-dirty
AMReX git hash: 26.06-15-g07311ca512

Problem name (from inputs file) is:  "Density Current" 
Level 0 is land
Level 1 is land
Using constant kinematic diffusion coefficients
  momentum : 75 m^2/s
  temperature : 75 m^2/s
  scalar : 0 m^2/s
Thermal stratification based on gradient of potential temperature
Thermal stratification based on gradient of potential temperature
Turning off native vertical implicit solve from vert_implicit flag.
Maximum simulation length based on stop_time: 900 s (elapsed) 
 Adding stop time 900 to start_time 0
Null land surface model!
SOLVER CHOICE: 
At level 0 : 
   compressible with implicit substepping
At level 1 : 
   anelastic with no substepping
   and fixed density
vert_implicit_fac           : 0 0 0
use_coriolis                : 0
use_gravity                 : 1
Moisture Model: None
Terrain Type: StaticFittedMesh
Buildings Type: None
   Mesh Type: StretchedDz
ABL Driver Type: 
    None
Coupling Type: 
    One-way
Radiation Model: None
Gradp_type                  : 0
Buoyancy_type at level 0 : 2
Buoyancy_type at level 1 : 3
Advection Choices: 
    dycore_horiz_adv_type   : Upwind_3rd
    dycore_vert_adv_type    : Upwind_3rd
   dryscal_horiz_adv_type   : Upwind_3rd
   dryscal_vert_adv_type    : Upwind_3rd
 moistscal_horiz_adv_type   : WENO3
 moistscal_vert_adv_type    : WENO3
Diffusion choices: 
    rho0_trans              : 1
    alpha_T                 : 75
    alpha_C                 : 0
    dynamic_viscosity       : 75
Sponge choices: 
Rayleigh damping            : None
w damping                   : 0 (coeff = -1 * dz/dt**2)
Turbulence Settings at level 0
    Using DNS model at level 0
Turbulence Settings at level 1
    Using DNS model at level 1
Refinement ratio at level 1 set to be 2 1 2
Creating new distribution map on level: 0
BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4)
       m_ref->m_hash_sig(0)
       ((0,0,0) (63,0,63) (0,0,0)) ((64,0,0) (127,0,63) (0,0,0)) ((128,0,0) (191,0,63) (0,0,0)) ((192,0,0) (255,0,63) (0,0,0)) )

max of zphys_nd 6400
max of zlevels  6400
Problem name "density current" does not add any velocity perturbations. 
Creating new distribution map on level: 1
BA FROM SCRATCH AT LEVEL 1 (BoxArray maxbox(5)
       m_ref->m_hash_sig(0)
       ((0,0,0) (15,0,111) (0,0,0)) ((16,0,0) (31,0,111) (0,0,0)) ((32,0,0) (47,0,111) (0,0,0)) ((48,0,0) (63,0,111) (0,0,0)) ((64,0,0) (79,0,111) (0,0,0)) )

Building the hybrid FFT solver to be used on domain ((0,0,0) (79,0,111) (0,0,0))
Problem name "density current" does not add any velocity perturbations. 
Problem name "density current" does not add any velocity perturbations. 
Projecting initial velocity field at level 1
Max/L2 norm of divergence before solve in subdomain 0 at level 1 : 0 0 and volume-weighted sum 0
 Subtracting 0 from rhs in subdomain 0
Sum after subtraction 0 in subdomain 0
Based on cfl of one 
Compressible dt at level 0 would be:  0.2882620166
Anelastic dt at level 0 would be undefined 
Fixed dt at level 0       is:  1
Fixed fast dt at level 0       is:  0.25
smallest even ratio is: 4
Based on cfl of one 
Compressible dt at level 1 would be:  0.1440724779
Anelastic dt at level 1 would be undefined 
Fixed dt at level 1       is:  1
smallest grid spacing at level 1 = 50
dt at level 1 = 1
Viscous CFL is 0.015
 
Min/max value of dp0/dx            are zero 
Min/max value of dp0/dy            are zero 
Min/max value of dp0/dz + rho0*|g| are less than 1e-10
 
 
Min/max value of dp0/dx            are zero 
Min/max value of dp0/dy            are zero 
Min/max value of dp0/dz + rho0*|g| are -6.888949067 1.456612608e-13 with min at face (79,0,112) with max at face (79,0,59)