Initializing AMReX (26.06-29-g20ce506a17b0)...
MPI initialized with 4 MPI processes
MPI initialized with thread support level 0
AMReX (26.06-29-g20ce506a17b0) initialized
Successfully read inputs file ... 

ERF git hash: 11dea595-dirty
AMReX git hash: 26.06-29-g20ce506a17

Problem name (from inputs file) is:  "BOMEX" 
Level 0 is land
Coriolis frequency, f = 3.76e-05 1/s
Thermal stratification based on gradient of potential temperature
Maximum simulation length based on stop_time: 21600 s (elapsed) 
 Adding stop time 21600 to start_time 0
Null land surface model!
SOLVER CHOICE: 
At level 0 : 
   compressible with implicit substepping
vert_implicit_fac at level  : 0 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1)
use_coriolis                : 1
use_gravity                 : 1
Moisture Model: Kessler No Rain
Terrain Type: None
Buildings Type: None
   Mesh Type: ConstantDz
ABL Driver Type: 
    None
Radiation Model: None
Gradp_type                  : 0
Buoyancy_type at level 0 : 1
Advection Choices: 
    dycore_horiz_adv_type   : Upwind_3rd
    dycore_vert_adv_type    : Upwind_3rd
   dryscal_horiz_adv_type   : Upwind_3rd_SL
   dryscal_vert_adv_type    : Upwind_3rd_SL
 moistscal_horiz_adv_type   : Upwind_3rd_SL
 moistscal_vert_adv_type    : Upwind_3rd_SL
Diffusion choices: 
    rho0_trans              : 1
    alpha_T                 : 0
    alpha_C                 : 0
    dynamic_viscosity       : 0
Not using any molecular diffusivity, i.e. using the modeled turbulent diffusivity
Sponge choices: 
Rayleigh damping            : None
w damping                   : 0 (coeff = -1 * dz/dt**2)
Turbulence Settings at level 0
    Using Smagorinsky LES model at level 0
    Smagorinsky uses Richardson number correction with Ri_crit = 0.25
    Cs                      : 0.17
    isotropic mixing        : 1
    Pr_t                    : 0.3333333333
    Sc_t                    : 0.3333333333
Restart from native checkpoint chk00000_for_restart
BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4)
       m_ref->m_hash_sig(0)
       ((0,0,0) (31,31,99) (0,0,0)) ((32,0,0) (63,31,99) (0,0,0)) ((0,32,0) (31,63,99) (0,0,0)) ((32,32,0) (63,63,99) (0,0,0)) )

Reading LMASK data
Restart time = 0.152182428 seconds.
Using specified ustar, tstar, qstar for MOST = 0.28 0.008 5.2e-05
If there is water, Charnock relation with C_a=0.0185 will be used
Reading MOST variables
 
Max value of |p_hse - p_eos| is 2414.578723
 with max in cell (31,31,0)