Initializing AMReX (26.07-16-g2d4861ab916b)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.07-16-g2d4861ab916b) initialized Successfully read inputs file ... ERF git hash: 3604eb07-dirty AMReX git hash: 26.07-16-g2d4861ab91 Problem name (from inputs file) is: "Ekman Spiral" Reading NC init file names at level 0 and index 0 : wrfinput_ekman_d01 Level 0 is land Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Reading Times wrfinput datetime 0 : 0001-01-01_00:00:00 -62135596800 Have read start_time string at level 0 is 0001-01-01_00:00:00 Have read start_time number at level 0 is -6.21355968e+10 Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time -6.21355968e+10 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac at level : 0 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 1 use_gravity : 1 Moisture Model: Saturation Adjustment Terrain Type: StaticFittedMesh Buildings Type: None Mesh Type: VariableDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (7,5,399) (0,0,0)) ((8,0,0) (11,5,399) (0,0,0)) ((0,6,0) (7,9,399) (0,0,0)) ((8,6,0) (11,9,399) (0,0,0)) ) Reading T00 from wrfinput Reading P00 from wrfinput Reading TLP from wrfinput Reading TISO from wrfinput Reading TLP_STRAT from wrfinput Reading P_STRAT from wrfinput WRF base state parameters (T00, P00, TLP, TISO, TLP_STRAT, P_STRAT) are: (0, 0, 0, 0, 0, 0) Loading initial data from NetCDF file at level 0 Reading from file wrfinput_ekman_d01 Will read density from ALB + AL variables Have read (nx,ny,nz) = 12 10 400 Have read (parent_ilo,parent_jlo) = 0 0 Have read refinement ratio = 1 Box in file ((0,0,0) (11,9,399) (0,0,0)) Box to fill ((0,0,0) (11,9,399) (0,0,0)) Checking for ALB ... Reading ALB Checking for AL ... Reading AL Checking for U ... Reading U Checking for V ... Reading V Checking for W ... Reading W Checking for THM ... Reading THM Checking for PH ... Reading PH Checking for PHB ... Reading PHB Checking for PB ... Reading PB Checking for P ... Reading P Checking for PSFC ... Reading PSFC PSFC read in had max of 0; replacing it by 1e5 everywhere Checking for MUB ... Reading MUB Checking for MAPFAC_U ... Reading MAPFAC_U MAPFAC_U cannot be 0, resetting to 1! MAPFAC_U resetting to 1 with lateral periodic BCs! Checking for MAPFAC_V ... Reading MAPFAC_V MAPFAC_V cannot be 0, resetting to 1! MAPFAC_V resetting to 1 with lateral periodic BCs! Checking for MAPFAC_M ... Reading MAPFAC_M MAPFAC_M cannot be 0, resetting to 1! MAPFAC_M resetting to 1 with lateral periodic BCs! Checking for SST ... Reading SST Checking for TSK ... Reading TSK Checking for LANDMASK ... Reading LANDMASK Checking for C1H ... Reading C1H Checking for C2H ... Reading C2H Checking for XLAT_V ... Reading XLAT_V Checking for XLONG_U ... Reading XLONG_U Checking for QVAPOR ... Reading QVAPOR Checking for QCLOUD ... Skipping QCLOUD Setting QCLOUD to 0 since we couldn't read it in ... DONE Checking for QRAIN ... Skipping QRAIN Ignoring QRAIN since we aren't using it ... DONE Checking for IVGTYP ... Reading IVGTYP Checking for ISLTYP ... Reading ISLTYP Terrain has min value = 0 and max value = 0 Top of mesh has min value = 4999.998805 and max value = 4999.998805 Warning: ProbHi(2) will be ignored; we are setting top of domain to 4999.998805 Verifying grid integrity The state read from WRF is being rebalanced! Problem name "ekman spiral" does not add any state perturbations. Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810227303 Fixed dt at level 0 is: 0.03 smallest grid spacing at level 0 = 11.61203491 dt at level 0 = 0.03 Viscous CFL is 0.0005562174344 Max value of |p_hse - p_eos| is less than 1e-8 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Min/max value of x-gradient of full (moist) pressure are zero Min/max value of y-gradient of full (moist) pressure are zero Min/max value of moist dp/dz + rho_m*|g| are -4.229505635e-12 4.225952921e-12 with min at face (7,5,217) with max at face (7,5,111) Writing native checkpoint EkmanSpiral_ideal_restart_chk00000 Writing Lat/Lon variables at level 0 Checkpoint write time = 0.013630592 seconds. Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00000 3DPlotfile write time = 0.022767445 seconds. TIME= 0 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 1-01-01 00:00:00.000000 (0 s elapsed) Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810227303 Fixed dt at level 0 is: 0.03 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.03 with dt = 0.03 Making slow rhs at time 0 for fast variables advancing from 0 to 0.01 No-substepping time integration at level 0 to 0.01 with dt = 0.01 Time integration of scalars at level 0 from 0 to 0.01 with dt = 0.01 using RHS created at 0 Making slow rhs at time 0.01 for fast variables advancing from 0 to 0.015 No-substepping time integration at level 0 to 0.015 with dt = 0.015 Time integration of scalars at level 0 from 0 to 0.015 with dt = 0.015 using RHS created at 0.01 Making slow rhs at time 0.015 for fast variables advancing from 0 to 0.03 No-substepping time integration at level 0 to 0.03 with dt = 0.03 Time integration of scalars at level 0 from 0 to 0.03 with dt = 0.03 using RHS created at 0.015 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 48000 cells Cloud fraction 0 0 Coarse STEP 1 ends. TIME = 0.03 DT = 0.03 Timestep time = 0.134193922 seconds. TIME= 0.03 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00001 3DPlotfile write time = 0.015749618 seconds. 1-01-01 00:00:01.970001 (0.03 s elapsed) Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810227116 Fixed dt at level 0 is: 0.03 [Level 0 step 2] ADVANCE from elapsed time = 0.03 to 0.06 with dt = 0.03 Making slow rhs at time 0.03 for fast variables advancing from 0.03 to 0.04 No-substepping time integration at level 0 to 0.04 with dt = 0.01 Time integration of scalars at level 0 from 0.03 to 0.04 with dt = 0.01 using RHS created at 0.03 Making slow rhs at time 0.04 for fast variables advancing from 0.03 to 0.045 No-substepping time integration at level 0 to 0.045 with dt = 0.015 Time integration of scalars at level 0 from 0.03 to 0.045 with dt = 0.015 using RHS created at 0.04 Making slow rhs at time 0.045 for fast variables advancing from 0.03 to 0.06 No-substepping time integration at level 0 to 0.06 with dt = 0.03 Time integration of scalars at level 0 from 0.03 to 0.06 with dt = 0.03 using RHS created at 0.045 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 48000 cells Cloud fraction 0.03 0 Coarse STEP 2 ends. TIME = 0.06 DT = 0.03 Timestep time = 0.13284715 seconds. TIME= 0.06 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00002 3DPlotfile write time = 0.016694575 seconds. 1-01-01 00:00:01.940002 (0.06 s elapsed) Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810226928 Fixed dt at level 0 is: 0.03 [Level 0 step 3] ADVANCE from elapsed time = 0.06 to 0.09 with dt = 0.03 Making slow rhs at time 0.06 for fast variables advancing from 0.06 to 0.07 No-substepping time integration at level 0 to 0.07 with dt = 0.01 Time integration of scalars at level 0 from 0.06 to 0.07 with dt = 0.01 using RHS created at 0.06 Making slow rhs at time 0.07 for fast variables advancing from 0.06 to 0.075 No-substepping time integration at level 0 to 0.075 with dt = 0.015 Time integration of scalars at level 0 from 0.06 to 0.075 with dt = 0.015 using RHS created at 0.07 Making slow rhs at time 0.075 for fast variables advancing from 0.06 to 0.09 No-substepping time integration at level 0 to 0.09 with dt = 0.03 Time integration of scalars at level 0 from 0.06 to 0.09 with dt = 0.03 using RHS created at 0.075 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 48000 cells Cloud fraction 0.06 0 Coarse STEP 3 ends. TIME = 0.09 DT = 0.03 Timestep time = 0.132829007 seconds. TIME= 0.09 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00003 3DPlotfile write time = 0.015968635 seconds. 1-01-01 00:00:01.910004 (0.09 s elapsed) Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810226741 Fixed dt at level 0 is: 0.03 [Level 0 step 4] ADVANCE from elapsed time = 0.09 to 0.12 with dt = 0.03 Making slow rhs at time 0.09 for fast variables advancing from 0.09 to 0.1 No-substepping time integration at level 0 to 0.1 with dt = 0.01 Time integration of scalars at level 0 from 0.09 to 0.1 with dt = 0.01 using RHS created at 0.09 Making slow rhs at time 0.1 for fast variables advancing from 0.09 to 0.105 No-substepping time integration at level 0 to 0.105 with dt = 0.015 Time integration of scalars at level 0 from 0.09 to 0.105 with dt = 0.015 using RHS created at 0.1 Making slow rhs at time 0.105 for fast variables advancing from 0.09 to 0.12 No-substepping time integration at level 0 to 0.12 with dt = 0.03 Time integration of scalars at level 0 from 0.09 to 0.12 with dt = 0.03 using RHS created at 0.105 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 48000 cells Cloud fraction 0.09 0 Coarse STEP 4 ends. TIME = 0.12 DT = 0.03 Timestep time = 0.132815032 seconds. TIME= 0.12 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00004 3DPlotfile write time = 0.016113959 seconds. 1-01-01 00:00:01.879997 (0.12 s elapsed) Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810226553 Fixed dt at level 0 is: 0.03 [Level 0 step 5] ADVANCE from elapsed time = 0.12 to 0.15 with dt = 0.03 Making slow rhs at time 0.12 for fast variables advancing from 0.12 to 0.13 No-substepping time integration at level 0 to 0.13 with dt = 0.01 Time integration of scalars at level 0 from 0.12 to 0.13 with dt = 0.01 using RHS created at 0.12 Making slow rhs at time 0.13 for fast variables advancing from 0.12 to 0.135 No-substepping time integration at level 0 to 0.135 with dt = 0.015 Time integration of scalars at level 0 from 0.12 to 0.135 with dt = 0.015 using RHS created at 0.13 Making slow rhs at time 0.135 for fast variables advancing from 0.12 to 0.15 No-substepping time integration at level 0 to 0.15 with dt = 0.03 Time integration of scalars at level 0 from 0.12 to 0.15 with dt = 0.03 using RHS created at 0.135 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 48000 cells Cloud fraction 0.12 0 Coarse STEP 5 ends. TIME = 0.15 DT = 0.03 Timestep time = 0.133510111 seconds. TIME= 0.15 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00005 3DPlotfile write time = 0.016067846 seconds. 1-01-01 00:00:01.849998 (0.15 s elapsed) Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810226366 Fixed dt at level 0 is: 0.03 [Level 0 step 6] ADVANCE from elapsed time = 0.15 to 0.18 with dt = 0.03 Making slow rhs at time 0.15 for fast variables advancing from 0.15 to 0.16 No-substepping time integration at level 0 to 0.16 with dt = 0.01 Time integration of scalars at level 0 from 0.15 to 0.16 with dt = 0.01 using RHS created at 0.15 Making slow rhs at time 0.16 for fast variables advancing from 0.15 to 0.165 No-substepping time integration at level 0 to 0.165 with dt = 0.015 Time integration of scalars at level 0 from 0.15 to 0.165 with dt = 0.015 using RHS created at 0.16 Making slow rhs at time 0.165 for fast variables advancing from 0.15 to 0.18 No-substepping time integration at level 0 to 0.18 with dt = 0.03 Time integration of scalars at level 0 from 0.15 to 0.18 with dt = 0.03 using RHS created at 0.165 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 48000 cells Cloud fraction 0.15 0 Coarse STEP 6 ends. TIME = 0.18 DT = 0.03 Timestep time = 0.133151855 seconds. TIME= 0.18 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00006 3DPlotfile write time = 0.016038179 seconds. 1-01-01 00:00:01.820000 (0.18 s elapsed) Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810226178 Fixed dt at level 0 is: 0.03 [Level 0 step 7] ADVANCE from elapsed time = 0.18 to 0.21 with dt = 0.03 Making slow rhs at time 0.18 for fast variables advancing from 0.18 to 0.19 No-substepping time integration at level 0 to 0.19 with dt = 0.01 Time integration of scalars at level 0 from 0.18 to 0.19 with dt = 0.01 using RHS created at 0.18 Making slow rhs at time 0.19 for fast variables advancing from 0.18 to 0.195 No-substepping time integration at level 0 to 0.195 with dt = 0.015 Time integration of scalars at level 0 from 0.18 to 0.195 with dt = 0.015 using RHS created at 0.19 Making slow rhs at time 0.195 for fast variables advancing from 0.18 to 0.21 No-substepping time integration at level 0 to 0.21 with dt = 0.03 Time integration of scalars at level 0 from 0.18 to 0.21 with dt = 0.03 using RHS created at 0.195 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 48000 cells Cloud fraction 0.18 0 Coarse STEP 7 ends. TIME = 0.21 DT = 0.03 Timestep time = 0.133091007 seconds. TIME= 0.21 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00007 3DPlotfile write time = 0.016057299 seconds. 1-01-01 00:00:01.790001 (0.21 s elapsed) Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810225991 Fixed dt at level 0 is: 0.03 [Level 0 step 8] ADVANCE from elapsed time = 0.21 to 0.24 with dt = 0.03 Making slow rhs at time 0.21 for fast variables advancing from 0.21 to 0.22 No-substepping time integration at level 0 to 0.22 with dt = 0.01 Time integration of scalars at level 0 from 0.21 to 0.22 with dt = 0.01 using RHS created at 0.21 Making slow rhs at time 0.22 for fast variables advancing from 0.21 to 0.225 No-substepping time integration at level 0 to 0.225 with dt = 0.015 Time integration of scalars at level 0 from 0.21 to 0.225 with dt = 0.015 using RHS created at 0.22 Making slow rhs at time 0.225 for fast variables advancing from 0.21 to 0.24 No-substepping time integration at level 0 to 0.24 with dt = 0.03 Time integration of scalars at level 0 from 0.21 to 0.24 with dt = 0.03 using RHS created at 0.225 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 48000 cells Cloud fraction 0.21 0 Coarse STEP 8 ends. TIME = 0.24 DT = 0.03 Timestep time = 0.132654355 seconds. TIME= 0.24 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00008 3DPlotfile write time = 0.015737078 seconds. 1-01-01 00:00:01.760002 (0.24 s elapsed) Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810225803 Fixed dt at level 0 is: 0.03 [Level 0 step 9] ADVANCE from elapsed time = 0.24 to 0.27 with dt = 0.03 Making slow rhs at time 0.24 for fast variables advancing from 0.24 to 0.25 No-substepping time integration at level 0 to 0.25 with dt = 0.01 Time integration of scalars at level 0 from 0.24 to 0.25 with dt = 0.01 using RHS created at 0.24 Making slow rhs at time 0.25 for fast variables advancing from 0.24 to 0.255 No-substepping time integration at level 0 to 0.255 with dt = 0.015 Time integration of scalars at level 0 from 0.24 to 0.255 with dt = 0.015 using RHS created at 0.25 Making slow rhs at time 0.255 for fast variables advancing from 0.24 to 0.27 No-substepping time integration at level 0 to 0.27 with dt = 0.03 Time integration of scalars at level 0 from 0.24 to 0.27 with dt = 0.03 using RHS created at 0.255 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 48000 cells Cloud fraction 0.24 0 Coarse STEP 9 ends. TIME = 0.27 DT = 0.03 Timestep time = 0.132016004 seconds. TIME= 0.27 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00009 3DPlotfile write time = 0.015782537 seconds. 1-01-01 00:00:01.730003 (0.27 s elapsed) Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810225616 Fixed dt at level 0 is: 0.03 [Level 0 step 10] ADVANCE from elapsed time = 0.27 to 0.3 with dt = 0.03 Making slow rhs at time 0.27 for fast variables advancing from 0.27 to 0.28 No-substepping time integration at level 0 to 0.28 with dt = 0.01 Time integration of scalars at level 0 from 0.27 to 0.28 with dt = 0.01 using RHS created at 0.27 Making slow rhs at time 0.28 for fast variables advancing from 0.27 to 0.285 No-substepping time integration at level 0 to 0.285 with dt = 0.015 Time integration of scalars at level 0 from 0.27 to 0.285 with dt = 0.015 using RHS created at 0.28 Making slow rhs at time 0.285 for fast variables advancing from 0.27 to 0.3 No-substepping time integration at level 0 to 0.3 with dt = 0.03 Time integration of scalars at level 0 from 0.27 to 0.3 with dt = 0.03 using RHS created at 0.285 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 48000 cells Cloud fraction 0.27 0 Coarse STEP 10 ends. TIME = 0.3 DT = 0.03 Timestep time = 0.132000676 seconds. TIME= 0.3 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00010 3DPlotfile write time = 0.015878211 seconds. 1-01-01 00:00:01.699997 (0.3 s elapsed) Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810225428 Fixed dt at level 0 is: 0.03 [Level 0 step 11] ADVANCE from elapsed time = 0.3 to 0.33 with dt = 0.03 Making slow rhs at time 0.3 for fast variables advancing from 0.3 to 0.31 No-substepping time integration at level 0 to 0.31 with dt = 0.01 Time integration of scalars at level 0 from 0.3 to 0.31 with dt = 0.01 using RHS created at 0.3 Making slow rhs at time 0.31 for fast variables advancing from 0.3 to 0.315 No-substepping time integration at level 0 to 0.315 with dt = 0.015 Time integration of scalars at level 0 from 0.3 to 0.315 with dt = 0.015 using RHS created at 0.31 Making slow rhs at time 0.315 for fast variables advancing from 0.3 to 0.33 No-substepping time integration at level 0 to 0.33 with dt = 0.03 Time integration of scalars at level 0 from 0.3 to 0.33 with dt = 0.03 using RHS created at 0.315 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 48000 cells Cloud fraction 0.3 0 Coarse STEP 11 ends. TIME = 0.33 DT = 0.03 Timestep time = 0.13146199 seconds. TIME= 0.33 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00011 3DPlotfile write time = 0.015681405 seconds. 1-01-01 00:00:01.669998 (0.33 s elapsed) Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.781022524 Fixed dt at level 0 is: 0.03 [Level 0 step 12] ADVANCE from elapsed time = 0.33 to 0.36 with dt = 0.03 Making slow rhs at time 0.33 for fast variables advancing from 0.33 to 0.34 No-substepping time integration at level 0 to 0.34 with dt = 0.01 Time integration of scalars at level 0 from 0.33 to 0.34 with dt = 0.01 using RHS created at 0.33 Making slow rhs at time 0.34 for fast variables advancing from 0.33 to 0.345 No-substepping time integration at level 0 to 0.345 with dt = 0.015 Time integration of scalars at level 0 from 0.33 to 0.345 with dt = 0.015 using RHS created at 0.34 Making slow rhs at time 0.345 for fast variables advancing from 0.33 to 0.36 No-substepping time integration at level 0 to 0.36 with dt = 0.03 Time integration of scalars at level 0 from 0.33 to 0.36 with dt = 0.03 using RHS created at 0.345 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 48000 cells Cloud fraction 0.33 0 Coarse STEP 12 ends. TIME = 0.36 DT = 0.03 Timestep time = 0.133338541 seconds. TIME= 0.36 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00012 3DPlotfile write time = 0.015869747 seconds. 1-01-01 00:00:01.639999 (0.36 s elapsed) Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810225052 Fixed dt at level 0 is: 0.03 [Level 0 step 13] ADVANCE from elapsed time = 0.36 to 0.39 with dt = 0.03 Making slow rhs at time 0.36 for fast variables advancing from 0.36 to 0.37 No-substepping time integration at level 0 to 0.37 with dt = 0.01 Time integration of scalars at level 0 from 0.36 to 0.37 with dt = 0.01 using RHS created at 0.36 Making slow rhs at time 0.37 for fast variables advancing from 0.36 to 0.375 No-substepping time integration at level 0 to 0.375 with dt = 0.015 Time integration of scalars at level 0 from 0.36 to 0.375 with dt = 0.015 using RHS created at 0.37 Making slow rhs at time 0.375 for fast variables advancing from 0.36 to 0.39 No-substepping time integration at level 0 to 0.39 with dt = 0.03 Time integration of scalars at level 0 from 0.36 to 0.39 with dt = 0.03 using RHS created at 0.375 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 48000 cells Cloud fraction 0.36 0 Coarse STEP 13 ends. TIME = 0.39 DT = 0.03 Timestep time = 0.132076989 seconds. TIME= 0.39 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00013 3DPlotfile write time = 0.015833982 seconds. 1-01-01 00:00:01.610001 (0.39 s elapsed) Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810224865 Fixed dt at level 0 is: 0.03 [Level 0 step 14] ADVANCE from elapsed time = 0.39 to 0.42 with dt = 0.03 Making slow rhs at time 0.39 for fast variables advancing from 0.39 to 0.4 No-substepping time integration at level 0 to 0.4 with dt = 0.01 Time integration of scalars at level 0 from 0.39 to 0.4 with dt = 0.01 using RHS created at 0.39 Making slow rhs at time 0.4 for fast variables advancing from 0.39 to 0.405 No-substepping time integration at level 0 to 0.405 with dt = 0.015 Time integration of scalars at level 0 from 0.39 to 0.405 with dt = 0.015 using RHS created at 0.4 Making slow rhs at time 0.405 for fast variables advancing from 0.39 to 0.42 No-substepping time integration at level 0 to 0.42 with dt = 0.03 Time integration of scalars at level 0 from 0.39 to 0.42 with dt = 0.03 using RHS created at 0.405 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 48000 cells Cloud fraction 0.39 0 Coarse STEP 14 ends. TIME = 0.42 DT = 0.03 Timestep time = 0.132399548 seconds. TIME= 0.42 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00014 3DPlotfile write time = 0.015938255 seconds. 1-01-01 00:00:01.580002 (0.42 s elapsed) Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810224677 Fixed dt at level 0 is: 0.03 [Level 0 step 15] ADVANCE from elapsed time = 0.42 to 0.45 with dt = 0.03 Making slow rhs at time 0.42 for fast variables advancing from 0.42 to 0.43 No-substepping time integration at level 0 to 0.43 with dt = 0.01 Time integration of scalars at level 0 from 0.42 to 0.43 with dt = 0.01 using RHS created at 0.42 Making slow rhs at time 0.43 for fast variables advancing from 0.42 to 0.435 No-substepping time integration at level 0 to 0.435 with dt = 0.015 Time integration of scalars at level 0 from 0.42 to 0.435 with dt = 0.015 using RHS created at 0.43 Making slow rhs at time 0.435 for fast variables advancing from 0.42 to 0.45 No-substepping time integration at level 0 to 0.45 with dt = 0.03 Time integration of scalars at level 0 from 0.42 to 0.45 with dt = 0.03 using RHS created at 0.435 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 48000 cells Cloud fraction 0.42 0 Coarse STEP 15 ends. TIME = 0.45 DT = 0.03 Timestep time = 0.132228396 seconds. TIME= 0.45 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00015 3DPlotfile write time = 0.015819089 seconds. 1-01-01 00:00:01.550003 (0.45 s elapsed) Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810224489 Fixed dt at level 0 is: 0.03 [Level 0 step 16] ADVANCE from elapsed time = 0.45 to 0.48 with dt = 0.03 Making slow rhs at time 0.45 for fast variables advancing from 0.45 to 0.46 No-substepping time integration at level 0 to 0.46 with dt = 0.01 Time integration of scalars at level 0 from 0.45 to 0.46 with dt = 0.01 using RHS created at 0.45 Making slow rhs at time 0.46 for fast variables advancing from 0.45 to 0.465 No-substepping time integration at level 0 to 0.465 with dt = 0.015 Time integration of scalars at level 0 from 0.45 to 0.465 with dt = 0.015 using RHS created at 0.46 Making slow rhs at time 0.465 for fast variables advancing from 0.45 to 0.48 No-substepping time integration at level 0 to 0.48 with dt = 0.03 Time integration of scalars at level 0 from 0.45 to 0.48 with dt = 0.03 using RHS created at 0.465 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 48000 cells Cloud fraction 0.45 0 Coarse STEP 16 ends. TIME = 0.48 DT = 0.03 Timestep time = 0.132574625 seconds. TIME= 0.48 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00016 3DPlotfile write time = 0.015995182 seconds. 1-01-01 00:00:01.519997 (0.48 s elapsed) Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810224301 Fixed dt at level 0 is: 0.03 [Level 0 step 17] ADVANCE from elapsed time = 0.48 to 0.51 with dt = 0.03 Making slow rhs at time 0.48 for fast variables advancing from 0.48 to 0.49 No-substepping time integration at level 0 to 0.49 with dt = 0.01 Time integration of scalars at level 0 from 0.48 to 0.49 with dt = 0.01 using RHS created at 0.48 Making slow rhs at time 0.49 for fast variables advancing from 0.48 to 0.495 No-substepping time integration at level 0 to 0.495 with dt = 0.015 Time integration of scalars at level 0 from 0.48 to 0.495 with dt = 0.015 using RHS created at 0.49 Making slow rhs at time 0.495 for fast variables advancing from 0.48 to 0.51 No-substepping time integration at level 0 to 0.51 with dt = 0.03 Time integration of scalars at level 0 from 0.48 to 0.51 with dt = 0.03 using RHS created at 0.495 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 48000 cells Cloud fraction 0.48 0 Coarse STEP 17 ends. TIME = 0.51 DT = 0.03 Timestep time = 0.132130792 seconds. TIME= 0.51 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00017 3DPlotfile write time = 0.015924291 seconds. 1-01-01 00:00:01.489998 (0.51 s elapsed) Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810224113 Fixed dt at level 0 is: 0.03 [Level 0 step 18] ADVANCE from elapsed time = 0.51 to 0.54 with dt = 0.03 Making slow rhs at time 0.51 for fast variables advancing from 0.51 to 0.52 No-substepping time integration at level 0 to 0.52 with dt = 0.01 Time integration of scalars at level 0 from 0.51 to 0.52 with dt = 0.01 using RHS created at 0.51 Making slow rhs at time 0.52 for fast variables advancing from 0.51 to 0.525 No-substepping time integration at level 0 to 0.525 with dt = 0.015 Time integration of scalars at level 0 from 0.51 to 0.525 with dt = 0.015 using RHS created at 0.52 Making slow rhs at time 0.525 for fast variables advancing from 0.51 to 0.54 No-substepping time integration at level 0 to 0.54 with dt = 0.03 Time integration of scalars at level 0 from 0.51 to 0.54 with dt = 0.03 using RHS created at 0.525 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 48000 cells Cloud fraction 0.51 0 Coarse STEP 18 ends. TIME = 0.54 DT = 0.03 Timestep time = 0.131881216 seconds. TIME= 0.54 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00018 3DPlotfile write time = 0.015996937 seconds. 1-01-01 00:00:01.459999 (0.54 s elapsed) Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810223925 Fixed dt at level 0 is: 0.03 [Level 0 step 19] ADVANCE from elapsed time = 0.54 to 0.57 with dt = 0.03 Making slow rhs at time 0.54 for fast variables advancing from 0.54 to 0.55 No-substepping time integration at level 0 to 0.55 with dt = 0.01 Time integration of scalars at level 0 from 0.54 to 0.55 with dt = 0.01 using RHS created at 0.54 Making slow rhs at time 0.55 for fast variables advancing from 0.54 to 0.555 No-substepping time integration at level 0 to 0.555 with dt = 0.015 Time integration of scalars at level 0 from 0.54 to 0.555 with dt = 0.015 using RHS created at 0.55 Making slow rhs at time 0.555 for fast variables advancing from 0.54 to 0.57 No-substepping time integration at level 0 to 0.57 with dt = 0.03 Time integration of scalars at level 0 from 0.54 to 0.57 with dt = 0.03 using RHS created at 0.555 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 48000 cells Cloud fraction 0.54 0 Coarse STEP 19 ends. TIME = 0.57 DT = 0.03 Timestep time = 0.131960984 seconds. TIME= 0.57 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00019 3DPlotfile write time = 0.016054737 seconds. 1-01-01 00:00:01.430000 (0.57 s elapsed) Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810223737 Fixed dt at level 0 is: 0.03 [Level 0 step 20] ADVANCE from elapsed time = 0.57 to 0.6 with dt = 0.03 Making slow rhs at time 0.57 for fast variables advancing from 0.57 to 0.58 No-substepping time integration at level 0 to 0.58 with dt = 0.01 Time integration of scalars at level 0 from 0.57 to 0.58 with dt = 0.01 using RHS created at 0.57 Making slow rhs at time 0.58 for fast variables advancing from 0.57 to 0.585 No-substepping time integration at level 0 to 0.585 with dt = 0.015 Time integration of scalars at level 0 from 0.57 to 0.585 with dt = 0.015 using RHS created at 0.58 Making slow rhs at time 0.585 for fast variables advancing from 0.57 to 0.6 No-substepping time integration at level 0 to 0.6 with dt = 0.03 Time integration of scalars at level 0 from 0.57 to 0.6 with dt = 0.03 using RHS created at 0.585 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 48000 cells Cloud fraction 0.57 0 Coarse STEP 20 ends. TIME = 0.6 DT = 0.03 Timestep time = 0.131627328 seconds. TIME= 0.6 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00020 3DPlotfile write time = 0.016717623 seconds. 1-01-01 00:00:01.400002 (0.6 s elapsed) Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810223549 Fixed dt at level 0 is: 0.03 [Level 0 step 21] ADVANCE from elapsed time = 0.6 to 0.63 with dt = 0.03 Making slow rhs at time 0.6 for fast variables advancing from 0.6 to 0.61 No-substepping time integration at level 0 to 0.61 with dt = 0.01 Time integration of scalars at level 0 from 0.6 to 0.61 with dt = 0.01 using RHS created at 0.6 Making slow rhs at time 0.61 for fast variables advancing from 0.6 to 0.615 No-substepping time integration at level 0 to 0.615 with dt = 0.015 Time integration of scalars at level 0 from 0.6 to 0.615 with dt = 0.015 using RHS created at 0.61 Making slow rhs at time 0.615 for fast variables advancing from 0.6 to 0.63 No-substepping time integration at level 0 to 0.63 with dt = 0.03 Time integration of scalars at level 0 from 0.6 to 0.63 with dt = 0.03 using RHS created at 0.615 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 48000 cells Cloud fraction 0.6 0 Coarse STEP 21 ends. TIME = 0.63 DT = 0.03 Timestep time = 0.131641637 seconds. TIME= 0.63 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00021 3DPlotfile write time = 0.015788436 seconds. 1-01-01 00:00:01.370003 (0.63 s elapsed) Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810223361 Fixed dt at level 0 is: 0.03 [Level 0 step 22] ADVANCE from elapsed time = 0.63 to 0.66 with dt = 0.03 Making slow rhs at time 0.63 for fast variables advancing from 0.63 to 0.64 No-substepping time integration at level 0 to 0.64 with dt = 0.01 Time integration of scalars at level 0 from 0.63 to 0.64 with dt = 0.01 using RHS created at 0.63 Making slow rhs at time 0.64 for fast variables advancing from 0.63 to 0.645 No-substepping time integration at level 0 to 0.645 with dt = 0.015 Time integration of scalars at level 0 from 0.63 to 0.645 with dt = 0.015 using RHS created at 0.64 Making slow rhs at time 0.645 for fast variables advancing from 0.63 to 0.66 No-substepping time integration at level 0 to 0.66 with dt = 0.03 Time integration of scalars at level 0 from 0.63 to 0.66 with dt = 0.03 using RHS created at 0.645 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 48000 cells Cloud fraction 0.63 0 Coarse STEP 22 ends. TIME = 0.66 DT = 0.03 Timestep time = 0.132154839 seconds. TIME= 0.66 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00022 3DPlotfile write time = 0.016046146 seconds. 1-01-01 00:00:01.339996 (0.66 s elapsed) Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810223173 Fixed dt at level 0 is: 0.03 [Level 0 step 23] ADVANCE from elapsed time = 0.66 to 0.69 with dt = 0.03 Making slow rhs at time 0.66 for fast variables advancing from 0.66 to 0.67 No-substepping time integration at level 0 to 0.67 with dt = 0.01 Time integration of scalars at level 0 from 0.66 to 0.67 with dt = 0.01 using RHS created at 0.66 Making slow rhs at time 0.67 for fast variables advancing from 0.66 to 0.675 No-substepping time integration at level 0 to 0.675 with dt = 0.015 Time integration of scalars at level 0 from 0.66 to 0.675 with dt = 0.015 using RHS created at 0.67 Making slow rhs at time 0.675 for fast variables advancing from 0.66 to 0.69 No-substepping time integration at level 0 to 0.69 with dt = 0.03 Time integration of scalars at level 0 from 0.66 to 0.69 with dt = 0.03 using RHS created at 0.675 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 48000 cells Cloud fraction 0.66 0 Coarse STEP 23 ends. TIME = 0.69 DT = 0.03 Timestep time = 0.131603832 seconds. TIME= 0.69 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00023 3DPlotfile write time = 0.015788522 seconds. 1-01-01 00:00:01.309998 (0.69 s elapsed) Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222985 Fixed dt at level 0 is: 0.03 [Level 0 step 24] ADVANCE from elapsed time = 0.69 to 0.72 with dt = 0.03 Making slow rhs at time 0.69 for fast variables advancing from 0.69 to 0.7 No-substepping time integration at level 0 to 0.7 with dt = 0.01 Time integration of scalars at level 0 from 0.69 to 0.7 with dt = 0.01 using RHS created at 0.69 Making slow rhs at time 0.7 for fast variables advancing from 0.69 to 0.705 No-substepping time integration at level 0 to 0.705 with dt = 0.015 Time integration of scalars at level 0 from 0.69 to 0.705 with dt = 0.015 using RHS created at 0.7 Making slow rhs at time 0.705 for fast variables advancing from 0.69 to 0.72 No-substepping time integration at level 0 to 0.72 with dt = 0.03 Time integration of scalars at level 0 from 0.69 to 0.72 with dt = 0.03 using RHS created at 0.705 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 48000 cells Cloud fraction 0.69 0 Coarse STEP 24 ends. TIME = 0.72 DT = 0.03 Timestep time = 0.131360941 seconds. TIME= 0.72 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00024 3DPlotfile write time = 0.016448965 seconds. 1-01-01 00:00:01.279999 (0.72 s elapsed) Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222797 Fixed dt at level 0 is: 0.03 [Level 0 step 25] ADVANCE from elapsed time = 0.72 to 0.75 with dt = 0.03 Making slow rhs at time 0.72 for fast variables advancing from 0.72 to 0.73 No-substepping time integration at level 0 to 0.73 with dt = 0.01 Time integration of scalars at level 0 from 0.72 to 0.73 with dt = 0.01 using RHS created at 0.72 Making slow rhs at time 0.73 for fast variables advancing from 0.72 to 0.735 No-substepping time integration at level 0 to 0.735 with dt = 0.015 Time integration of scalars at level 0 from 0.72 to 0.735 with dt = 0.015 using RHS created at 0.73 Making slow rhs at time 0.735 for fast variables advancing from 0.72 to 0.75 No-substepping time integration at level 0 to 0.75 with dt = 0.03 Time integration of scalars at level 0 from 0.72 to 0.75 with dt = 0.03 using RHS created at 0.735 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 48000 cells Cloud fraction 0.72 0 Coarse STEP 25 ends. TIME = 0.75 DT = 0.03 Timestep time = 0.131681611 seconds. TIME= 0.75 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00025 3DPlotfile write time = 0.015737365 seconds. Writing native checkpoint EkmanSpiral_ideal_restart_chk00025 Writing Lat/Lon variables at level 0 Checkpoint write time = 0.013349121 seconds. 1-01-01 00:00:01.250000 (0.75 s elapsed) Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222609 Fixed dt at level 0 is: 0.03 [Level 0 step 26] ADVANCE from elapsed time = 0.75 to 0.78 with dt = 0.03 Making slow rhs at time 0.75 for fast variables advancing from 0.75 to 0.76 No-substepping time integration at level 0 to 0.76 with dt = 0.01 Time integration of scalars at level 0 from 0.75 to 0.76 with dt = 0.01 using RHS created at 0.75 Making slow rhs at time 0.76 for fast variables advancing from 0.75 to 0.765 No-substepping time integration at level 0 to 0.765 with dt = 0.015 Time integration of scalars at level 0 from 0.75 to 0.765 with dt = 0.015 using RHS created at 0.76 Making slow rhs at time 0.765 for fast variables advancing from 0.75 to 0.78 No-substepping time integration at level 0 to 0.78 with dt = 0.03 Time integration of scalars at level 0 from 0.75 to 0.78 with dt = 0.03 using RHS created at 0.765 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 48000 cells Cloud fraction 0.75 0 Coarse STEP 26 ends. TIME = 0.78 DT = 0.03 Timestep time = 0.131470857 seconds. TIME= 0.78 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00026 3DPlotfile write time = 0.015898302 seconds. 1-01-01 00:00:01.220001 (0.78 s elapsed) Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222421 Fixed dt at level 0 is: 0.03 [Level 0 step 27] ADVANCE from elapsed time = 0.78 to 0.81 with dt = 0.03 Making slow rhs at time 0.78 for fast variables advancing from 0.78 to 0.79 No-substepping time integration at level 0 to 0.79 with dt = 0.01 Time integration of scalars at level 0 from 0.78 to 0.79 with dt = 0.01 using RHS created at 0.78 Making slow rhs at time 0.79 for fast variables advancing from 0.78 to 0.795 No-substepping time integration at level 0 to 0.795 with dt = 0.015 Time integration of scalars at level 0 from 0.78 to 0.795 with dt = 0.015 using RHS created at 0.79 Making slow rhs at time 0.795 for fast variables advancing from 0.78 to 0.81 No-substepping time integration at level 0 to 0.81 with dt = 0.03 Time integration of scalars at level 0 from 0.78 to 0.81 with dt = 0.03 using RHS created at 0.795 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 48000 cells Cloud fraction 0.78 0 Coarse STEP 27 ends. TIME = 0.81 DT = 0.03 Timestep time = 0.132076387 seconds. TIME= 0.81 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00027 3DPlotfile write time = 0.015809835 seconds. 1-01-01 00:00:01.190002 (0.81 s elapsed) Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222232 Fixed dt at level 0 is: 0.03 [Level 0 step 28] ADVANCE from elapsed time = 0.81 to 0.84 with dt = 0.03 Making slow rhs at time 0.81 for fast variables advancing from 0.81 to 0.82 No-substepping time integration at level 0 to 0.82 with dt = 0.01 Time integration of scalars at level 0 from 0.81 to 0.82 with dt = 0.01 using RHS created at 0.81 Making slow rhs at time 0.82 for fast variables advancing from 0.81 to 0.825 No-substepping time integration at level 0 to 0.825 with dt = 0.015 Time integration of scalars at level 0 from 0.81 to 0.825 with dt = 0.015 using RHS created at 0.82 Making slow rhs at time 0.825 for fast variables advancing from 0.81 to 0.84 No-substepping time integration at level 0 to 0.84 with dt = 0.03 Time integration of scalars at level 0 from 0.81 to 0.84 with dt = 0.03 using RHS created at 0.825 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 48000 cells Cloud fraction 0.81 0 Coarse STEP 28 ends. TIME = 0.84 DT = 0.03 Timestep time = 0.131988451 seconds. TIME= 0.84 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00028 3DPlotfile write time = 0.015883461 seconds. 1-01-01 00:00:01.160004 (0.84 s elapsed) Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222044 Fixed dt at level 0 is: 0.03 [Level 0 step 29] ADVANCE from elapsed time = 0.84 to 0.87 with dt = 0.03 Making slow rhs at time 0.84 for fast variables advancing from 0.84 to 0.85 No-substepping time integration at level 0 to 0.85 with dt = 0.01 Time integration of scalars at level 0 from 0.84 to 0.85 with dt = 0.01 using RHS created at 0.84 Making slow rhs at time 0.85 for fast variables advancing from 0.84 to 0.855 No-substepping time integration at level 0 to 0.855 with dt = 0.015 Time integration of scalars at level 0 from 0.84 to 0.855 with dt = 0.015 using RHS created at 0.85 Making slow rhs at time 0.855 for fast variables advancing from 0.84 to 0.87 No-substepping time integration at level 0 to 0.87 with dt = 0.03 Time integration of scalars at level 0 from 0.84 to 0.87 with dt = 0.03 using RHS created at 0.855 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 48000 cells Cloud fraction 0.84 0 Coarse STEP 29 ends. TIME = 0.87 DT = 0.03 Timestep time = 0.131973182 seconds. TIME= 0.87 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00029 3DPlotfile write time = 0.015927766 seconds. 1-01-01 00:00:01.129997 (0.87 s elapsed) Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221856 Fixed dt at level 0 is: 0.03 [Level 0 step 30] ADVANCE from elapsed time = 0.87 to 0.9 with dt = 0.03 Making slow rhs at time 0.87 for fast variables advancing from 0.87 to 0.88 No-substepping time integration at level 0 to 0.88 with dt = 0.01 Time integration of scalars at level 0 from 0.87 to 0.88 with dt = 0.01 using RHS created at 0.87 Making slow rhs at time 0.88 for fast variables advancing from 0.87 to 0.885 No-substepping time integration at level 0 to 0.885 with dt = 0.015 Time integration of scalars at level 0 from 0.87 to 0.885 with dt = 0.015 using RHS created at 0.88 Making slow rhs at time 0.885 for fast variables advancing from 0.87 to 0.9 No-substepping time integration at level 0 to 0.9 with dt = 0.03 Time integration of scalars at level 0 from 0.87 to 0.9 with dt = 0.03 using RHS created at 0.885 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 48000 cells Cloud fraction 0.87 0 Coarse STEP 30 ends. TIME = 0.9 DT = 0.03 Timestep time = 0.131779771 seconds. TIME= 0.9 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00030 3DPlotfile write time = 0.015862342 seconds. 1-01-01 00:00:01.099998 (0.9 s elapsed) Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221667 Fixed dt at level 0 is: 0.03 [Level 0 step 31] ADVANCE from elapsed time = 0.9 to 0.93 with dt = 0.03 Making slow rhs at time 0.9 for fast variables advancing from 0.9 to 0.91 No-substepping time integration at level 0 to 0.91 with dt = 0.01 Time integration of scalars at level 0 from 0.9 to 0.91 with dt = 0.01 using RHS created at 0.9 Making slow rhs at time 0.91 for fast variables advancing from 0.9 to 0.915 No-substepping time integration at level 0 to 0.915 with dt = 0.015 Time integration of scalars at level 0 from 0.9 to 0.915 with dt = 0.015 using RHS created at 0.91 Making slow rhs at time 0.915 for fast variables advancing from 0.9 to 0.93 No-substepping time integration at level 0 to 0.93 with dt = 0.03 Time integration of scalars at level 0 from 0.9 to 0.93 with dt = 0.03 using RHS created at 0.915 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 48000 cells Cloud fraction 0.9 0 Coarse STEP 31 ends. TIME = 0.93 DT = 0.03 Timestep time = 0.131888779 seconds. TIME= 0.93 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00031 3DPlotfile write time = 0.015982189 seconds. 1-01-01 00:00:01.070000 (0.93 s elapsed) Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221479 Fixed dt at level 0 is: 0.03 [Level 0 step 32] ADVANCE from elapsed time = 0.93 to 0.96 with dt = 0.03 Making slow rhs at time 0.93 for fast variables advancing from 0.93 to 0.94 No-substepping time integration at level 0 to 0.94 with dt = 0.01 Time integration of scalars at level 0 from 0.93 to 0.94 with dt = 0.01 using RHS created at 0.93 Making slow rhs at time 0.94 for fast variables advancing from 0.93 to 0.945 No-substepping time integration at level 0 to 0.945 with dt = 0.015 Time integration of scalars at level 0 from 0.93 to 0.945 with dt = 0.015 using RHS created at 0.94 Making slow rhs at time 0.945 for fast variables advancing from 0.93 to 0.96 No-substepping time integration at level 0 to 0.96 with dt = 0.03 Time integration of scalars at level 0 from 0.93 to 0.96 with dt = 0.03 using RHS created at 0.945 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 48000 cells Cloud fraction 0.93 0 Coarse STEP 32 ends. TIME = 0.96 DT = 0.03 Timestep time = 0.131902423 seconds. TIME= 0.96 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00032 3DPlotfile write time = 0.015948467 seconds. 1-01-01 00:00:01.040001 (0.96 s elapsed) Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221291 Fixed dt at level 0 is: 0.03 [Level 0 step 33] ADVANCE from elapsed time = 0.96 to 0.99 with dt = 0.03 Making slow rhs at time 0.96 for fast variables advancing from 0.96 to 0.97 No-substepping time integration at level 0 to 0.97 with dt = 0.01 Time integration of scalars at level 0 from 0.96 to 0.97 with dt = 0.01 using RHS created at 0.96 Making slow rhs at time 0.97 for fast variables advancing from 0.96 to 0.975 No-substepping time integration at level 0 to 0.975 with dt = 0.015 Time integration of scalars at level 0 from 0.96 to 0.975 with dt = 0.015 using RHS created at 0.97 Making slow rhs at time 0.975 for fast variables advancing from 0.96 to 0.99 No-substepping time integration at level 0 to 0.99 with dt = 0.03 Time integration of scalars at level 0 from 0.96 to 0.99 with dt = 0.03 using RHS created at 0.975 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 48000 cells Cloud fraction 0.96 0 Coarse STEP 33 ends. TIME = 0.99 DT = 0.03 Timestep time = 0.132782889 seconds. TIME= 0.99 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00033 3DPlotfile write time = 0.016021376 seconds. 1-01-01 00:00:01.010002 (0.99 s elapsed) Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221102 Fixed dt at level 0 is: 0.03 [Level 0 step 34] ADVANCE from elapsed time = 0.99 to 1.02 with dt = 0.03 Making slow rhs at time 0.99 for fast variables advancing from 0.99 to 1 No-substepping time integration at level 0 to 1 with dt = 0.01 Time integration of scalars at level 0 from 0.99 to 1 with dt = 0.01 using RHS created at 0.99 Making slow rhs at time 1 for fast variables advancing from 0.99 to 1.005 No-substepping time integration at level 0 to 1.005 with dt = 0.015 Time integration of scalars at level 0 from 0.99 to 1.005 with dt = 0.015 using RHS created at 1 Making slow rhs at time 1.005 for fast variables advancing from 0.99 to 1.02 No-substepping time integration at level 0 to 1.02 with dt = 0.03 Time integration of scalars at level 0 from 0.99 to 1.02 with dt = 0.03 using RHS created at 1.005 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 48000 cells Cloud fraction 0.99 0 Coarse STEP 34 ends. TIME = 1.02 DT = 0.03 Timestep time = 0.131865659 seconds. TIME= 1.02 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00034 3DPlotfile write time = 0.01594086 seconds. 1-01-01 00:00:02.980003 (1.02 s elapsed) Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220914 Fixed dt at level 0 is: 0.03 [Level 0 step 35] ADVANCE from elapsed time = 1.02 to 1.05 with dt = 0.03 Making slow rhs at time 1.02 for fast variables advancing from 1.02 to 1.03 No-substepping time integration at level 0 to 1.03 with dt = 0.01 Time integration of scalars at level 0 from 1.02 to 1.03 with dt = 0.01 using RHS created at 1.02 Making slow rhs at time 1.03 for fast variables advancing from 1.02 to 1.035 No-substepping time integration at level 0 to 1.035 with dt = 0.015 Time integration of scalars at level 0 from 1.02 to 1.035 with dt = 0.015 using RHS created at 1.03 Making slow rhs at time 1.035 for fast variables advancing from 1.02 to 1.05 No-substepping time integration at level 0 to 1.05 with dt = 0.03 Time integration of scalars at level 0 from 1.02 to 1.05 with dt = 0.03 using RHS created at 1.035 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 48000 cells Cloud fraction 1.02 0 Coarse STEP 35 ends. TIME = 1.05 DT = 0.03 Timestep time = 0.132445798 seconds. TIME= 1.05 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00035 3DPlotfile write time = 0.015870452 seconds. 1-01-01 00:00:02.949997 (1.05 s elapsed) Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220725 Fixed dt at level 0 is: 0.03 [Level 0 step 36] ADVANCE from elapsed time = 1.05 to 1.08 with dt = 0.03 Making slow rhs at time 1.05 for fast variables advancing from 1.05 to 1.06 No-substepping time integration at level 0 to 1.06 with dt = 0.01 Time integration of scalars at level 0 from 1.05 to 1.06 with dt = 0.01 using RHS created at 1.05 Making slow rhs at time 1.06 for fast variables advancing from 1.05 to 1.065 No-substepping time integration at level 0 to 1.065 with dt = 0.015 Time integration of scalars at level 0 from 1.05 to 1.065 with dt = 0.015 using RHS created at 1.06 Making slow rhs at time 1.065 for fast variables advancing from 1.05 to 1.08 No-substepping time integration at level 0 to 1.08 with dt = 0.03 Time integration of scalars at level 0 from 1.05 to 1.08 with dt = 0.03 using RHS created at 1.065 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 48000 cells Cloud fraction 1.05 0 Coarse STEP 36 ends. TIME = 1.08 DT = 0.03 Timestep time = 0.131614275 seconds. TIME= 1.08 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00036 3DPlotfile write time = 0.015840547 seconds. 1-01-01 00:00:02.919998 (1.08 s elapsed) Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220537 Fixed dt at level 0 is: 0.03 [Level 0 step 37] ADVANCE from elapsed time = 1.08 to 1.11 with dt = 0.03 Making slow rhs at time 1.08 for fast variables advancing from 1.08 to 1.09 No-substepping time integration at level 0 to 1.09 with dt = 0.01 Time integration of scalars at level 0 from 1.08 to 1.09 with dt = 0.01 using RHS created at 1.08 Making slow rhs at time 1.09 for fast variables advancing from 1.08 to 1.095 No-substepping time integration at level 0 to 1.095 with dt = 0.015 Time integration of scalars at level 0 from 1.08 to 1.095 with dt = 0.015 using RHS created at 1.09 Making slow rhs at time 1.095 for fast variables advancing from 1.08 to 1.11 No-substepping time integration at level 0 to 1.11 with dt = 0.03 Time integration of scalars at level 0 from 1.08 to 1.11 with dt = 0.03 using RHS created at 1.095 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 48000 cells Cloud fraction 1.08 0 Coarse STEP 37 ends. TIME = 1.11 DT = 0.03 Timestep time = 0.132251814 seconds. TIME= 1.11 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00037 3DPlotfile write time = 0.015881429 seconds. 1-01-01 00:00:02.889999 (1.11 s elapsed) Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220348 Fixed dt at level 0 is: 0.03 [Level 0 step 38] ADVANCE from elapsed time = 1.11 to 1.14 with dt = 0.03 Making slow rhs at time 1.11 for fast variables advancing from 1.11 to 1.12 No-substepping time integration at level 0 to 1.12 with dt = 0.01 Time integration of scalars at level 0 from 1.11 to 1.12 with dt = 0.01 using RHS created at 1.11 Making slow rhs at time 1.12 for fast variables advancing from 1.11 to 1.125 No-substepping time integration at level 0 to 1.125 with dt = 0.015 Time integration of scalars at level 0 from 1.11 to 1.125 with dt = 0.015 using RHS created at 1.12 Making slow rhs at time 1.125 for fast variables advancing from 1.11 to 1.14 No-substepping time integration at level 0 to 1.14 with dt = 0.03 Time integration of scalars at level 0 from 1.11 to 1.14 with dt = 0.03 using RHS created at 1.125 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 48000 cells Cloud fraction 1.11 0 Coarse STEP 38 ends. TIME = 1.14 DT = 0.03 Timestep time = 0.131998337 seconds. TIME= 1.14 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00038 3DPlotfile write time = 0.016010202 seconds. 1-01-01 00:00:02.860001 (1.14 s elapsed) Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.781022016 Fixed dt at level 0 is: 0.03 [Level 0 step 39] ADVANCE from elapsed time = 1.14 to 1.17 with dt = 0.03 Making slow rhs at time 1.14 for fast variables advancing from 1.14 to 1.15 No-substepping time integration at level 0 to 1.15 with dt = 0.01 Time integration of scalars at level 0 from 1.14 to 1.15 with dt = 0.01 using RHS created at 1.14 Making slow rhs at time 1.15 for fast variables advancing from 1.14 to 1.155 No-substepping time integration at level 0 to 1.155 with dt = 0.015 Time integration of scalars at level 0 from 1.14 to 1.155 with dt = 0.015 using RHS created at 1.15 Making slow rhs at time 1.155 for fast variables advancing from 1.14 to 1.17 No-substepping time integration at level 0 to 1.17 with dt = 0.03 Time integration of scalars at level 0 from 1.14 to 1.17 with dt = 0.03 using RHS created at 1.155 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 48000 cells Cloud fraction 1.14 0 Coarse STEP 39 ends. TIME = 1.17 DT = 0.03 Timestep time = 0.131976818 seconds. TIME= 1.17 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00039 3DPlotfile write time = 0.015804125 seconds. 1-01-01 00:00:02.830002 (1.17 s elapsed) Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219971 Fixed dt at level 0 is: 0.03 [Level 0 step 40] ADVANCE from elapsed time = 1.17 to 1.2 with dt = 0.03 Making slow rhs at time 1.17 for fast variables advancing from 1.17 to 1.18 No-substepping time integration at level 0 to 1.18 with dt = 0.01 Time integration of scalars at level 0 from 1.17 to 1.18 with dt = 0.01 using RHS created at 1.17 Making slow rhs at time 1.18 for fast variables advancing from 1.17 to 1.185 No-substepping time integration at level 0 to 1.185 with dt = 0.015 Time integration of scalars at level 0 from 1.17 to 1.185 with dt = 0.015 using RHS created at 1.18 Making slow rhs at time 1.185 for fast variables advancing from 1.17 to 1.2 No-substepping time integration at level 0 to 1.2 with dt = 0.03 Time integration of scalars at level 0 from 1.17 to 1.2 with dt = 0.03 using RHS created at 1.185 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 48000 cells Cloud fraction 1.17 0 Coarse STEP 40 ends. TIME = 1.2 DT = 0.03 Timestep time = 0.131997768 seconds. TIME= 1.2 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00040 3DPlotfile write time = 0.016641545 seconds. 1-01-01 00:00:02.800003 (1.2 s elapsed) Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219782 Fixed dt at level 0 is: 0.03 [Level 0 step 41] ADVANCE from elapsed time = 1.2 to 1.23 with dt = 0.03 Making slow rhs at time 1.2 for fast variables advancing from 1.2 to 1.21 No-substepping time integration at level 0 to 1.21 with dt = 0.01 Time integration of scalars at level 0 from 1.2 to 1.21 with dt = 0.01 using RHS created at 1.2 Making slow rhs at time 1.21 for fast variables advancing from 1.2 to 1.215 No-substepping time integration at level 0 to 1.215 with dt = 0.015 Time integration of scalars at level 0 from 1.2 to 1.215 with dt = 0.015 using RHS created at 1.21 Making slow rhs at time 1.215 for fast variables advancing from 1.2 to 1.23 No-substepping time integration at level 0 to 1.23 with dt = 0.03 Time integration of scalars at level 0 from 1.2 to 1.23 with dt = 0.03 using RHS created at 1.215 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 48000 cells Cloud fraction 1.2 0 Coarse STEP 41 ends. TIME = 1.23 DT = 0.03 Timestep time = 0.13193305 seconds. TIME= 1.23 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00041 3DPlotfile write time = 0.015818224 seconds. 1-01-01 00:00:02.769997 (1.23 s elapsed) Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219594 Fixed dt at level 0 is: 0.03 [Level 0 step 42] ADVANCE from elapsed time = 1.23 to 1.26 with dt = 0.03 Making slow rhs at time 1.23 for fast variables advancing from 1.23 to 1.24 No-substepping time integration at level 0 to 1.24 with dt = 0.01 Time integration of scalars at level 0 from 1.23 to 1.24 with dt = 0.01 using RHS created at 1.23 Making slow rhs at time 1.24 for fast variables advancing from 1.23 to 1.245 No-substepping time integration at level 0 to 1.245 with dt = 0.015 Time integration of scalars at level 0 from 1.23 to 1.245 with dt = 0.015 using RHS created at 1.24 Making slow rhs at time 1.245 for fast variables advancing from 1.23 to 1.26 No-substepping time integration at level 0 to 1.26 with dt = 0.03 Time integration of scalars at level 0 from 1.23 to 1.26 with dt = 0.03 using RHS created at 1.245 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 48000 cells Cloud fraction 1.23 0 Coarse STEP 42 ends. TIME = 1.26 DT = 0.03 Timestep time = 0.132055623 seconds. TIME= 1.26 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00042 3DPlotfile write time = 0.015870431 seconds. 1-01-01 00:00:02.739998 (1.26 s elapsed) Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219405 Fixed dt at level 0 is: 0.03 [Level 0 step 43] ADVANCE from elapsed time = 1.26 to 1.29 with dt = 0.03 Making slow rhs at time 1.26 for fast variables advancing from 1.26 to 1.27 No-substepping time integration at level 0 to 1.27 with dt = 0.01 Time integration of scalars at level 0 from 1.26 to 1.27 with dt = 0.01 using RHS created at 1.26 Making slow rhs at time 1.27 for fast variables advancing from 1.26 to 1.275 No-substepping time integration at level 0 to 1.275 with dt = 0.015 Time integration of scalars at level 0 from 1.26 to 1.275 with dt = 0.015 using RHS created at 1.27 Making slow rhs at time 1.275 for fast variables advancing from 1.26 to 1.29 No-substepping time integration at level 0 to 1.29 with dt = 0.03 Time integration of scalars at level 0 from 1.26 to 1.29 with dt = 0.03 using RHS created at 1.275 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 48000 cells Cloud fraction 1.26 0 Coarse STEP 43 ends. TIME = 1.29 DT = 0.03 Timestep time = 0.131922772 seconds. TIME= 1.29 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00043 3DPlotfile write time = 0.015857235 seconds. 1-01-01 00:00:02.709999 (1.29 s elapsed) Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219216 Fixed dt at level 0 is: 0.03 [Level 0 step 44] ADVANCE from elapsed time = 1.29 to 1.32 with dt = 0.03 Making slow rhs at time 1.29 for fast variables advancing from 1.29 to 1.3 No-substepping time integration at level 0 to 1.3 with dt = 0.01 Time integration of scalars at level 0 from 1.29 to 1.3 with dt = 0.01 using RHS created at 1.29 Making slow rhs at time 1.3 for fast variables advancing from 1.29 to 1.305 No-substepping time integration at level 0 to 1.305 with dt = 0.015 Time integration of scalars at level 0 from 1.29 to 1.305 with dt = 0.015 using RHS created at 1.3 Making slow rhs at time 1.305 for fast variables advancing from 1.29 to 1.32 No-substepping time integration at level 0 to 1.32 with dt = 0.03 Time integration of scalars at level 0 from 1.29 to 1.32 with dt = 0.03 using RHS created at 1.305 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 48000 cells Cloud fraction 1.29 0 Coarse STEP 44 ends. TIME = 1.32 DT = 0.03 Timestep time = 0.1320447 seconds. TIME= 1.32 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00044 3DPlotfile write time = 0.015973141 seconds. 1-01-01 00:00:02.680000 (1.32 s elapsed) Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219027 Fixed dt at level 0 is: 0.03 [Level 0 step 45] ADVANCE from elapsed time = 1.32 to 1.35 with dt = 0.03 Making slow rhs at time 1.32 for fast variables advancing from 1.32 to 1.33 No-substepping time integration at level 0 to 1.33 with dt = 0.01 Time integration of scalars at level 0 from 1.32 to 1.33 with dt = 0.01 using RHS created at 1.32 Making slow rhs at time 1.33 for fast variables advancing from 1.32 to 1.335 No-substepping time integration at level 0 to 1.335 with dt = 0.015 Time integration of scalars at level 0 from 1.32 to 1.335 with dt = 0.015 using RHS created at 1.33 Making slow rhs at time 1.335 for fast variables advancing from 1.32 to 1.35 No-substepping time integration at level 0 to 1.35 with dt = 0.03 Time integration of scalars at level 0 from 1.32 to 1.35 with dt = 0.03 using RHS created at 1.335 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 48000 cells Cloud fraction 1.32 0 Coarse STEP 45 ends. TIME = 1.35 DT = 0.03 Timestep time = 0.132153316 seconds. TIME= 1.35 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00045 3DPlotfile write time = 0.015991543 seconds. 1-01-01 00:00:02.650002 (1.35 s elapsed) Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218838 Fixed dt at level 0 is: 0.03 [Level 0 step 46] ADVANCE from elapsed time = 1.35 to 1.38 with dt = 0.03 Making slow rhs at time 1.35 for fast variables advancing from 1.35 to 1.36 No-substepping time integration at level 0 to 1.36 with dt = 0.01 Time integration of scalars at level 0 from 1.35 to 1.36 with dt = 0.01 using RHS created at 1.35 Making slow rhs at time 1.36 for fast variables advancing from 1.35 to 1.365 No-substepping time integration at level 0 to 1.365 with dt = 0.015 Time integration of scalars at level 0 from 1.35 to 1.365 with dt = 0.015 using RHS created at 1.36 Making slow rhs at time 1.365 for fast variables advancing from 1.35 to 1.38 No-substepping time integration at level 0 to 1.38 with dt = 0.03 Time integration of scalars at level 0 from 1.35 to 1.38 with dt = 0.03 using RHS created at 1.365 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 48000 cells Cloud fraction 1.35 0 Coarse STEP 46 ends. TIME = 1.38 DT = 0.03 Timestep time = 0.132012214 seconds. TIME= 1.38 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00046 3DPlotfile write time = 0.015821205 seconds. 1-01-01 00:00:02.620003 (1.38 s elapsed) Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.781021865 Fixed dt at level 0 is: 0.03 [Level 0 step 47] ADVANCE from elapsed time = 1.38 to 1.41 with dt = 0.03 Making slow rhs at time 1.38 for fast variables advancing from 1.38 to 1.39 No-substepping time integration at level 0 to 1.39 with dt = 0.01 Time integration of scalars at level 0 from 1.38 to 1.39 with dt = 0.01 using RHS created at 1.38 Making slow rhs at time 1.39 for fast variables advancing from 1.38 to 1.395 No-substepping time integration at level 0 to 1.395 with dt = 0.015 Time integration of scalars at level 0 from 1.38 to 1.395 with dt = 0.015 using RHS created at 1.39 Making slow rhs at time 1.395 for fast variables advancing from 1.38 to 1.41 No-substepping time integration at level 0 to 1.41 with dt = 0.03 Time integration of scalars at level 0 from 1.38 to 1.41 with dt = 0.03 using RHS created at 1.395 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 48000 cells Cloud fraction 1.38 0 Coarse STEP 47 ends. TIME = 1.41 DT = 0.03 Timestep time = 0.132385264 seconds. TIME= 1.41 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00047 3DPlotfile write time = 0.016861652 seconds. 1-01-01 00:00:02.589996 (1.41 s elapsed) Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218461 Fixed dt at level 0 is: 0.03 [Level 0 step 48] ADVANCE from elapsed time = 1.41 to 1.44 with dt = 0.03 Making slow rhs at time 1.41 for fast variables advancing from 1.41 to 1.42 No-substepping time integration at level 0 to 1.42 with dt = 0.01 Time integration of scalars at level 0 from 1.41 to 1.42 with dt = 0.01 using RHS created at 1.41 Making slow rhs at time 1.42 for fast variables advancing from 1.41 to 1.425 No-substepping time integration at level 0 to 1.425 with dt = 0.015 Time integration of scalars at level 0 from 1.41 to 1.425 with dt = 0.015 using RHS created at 1.42 Making slow rhs at time 1.425 for fast variables advancing from 1.41 to 1.44 No-substepping time integration at level 0 to 1.44 with dt = 0.03 Time integration of scalars at level 0 from 1.41 to 1.44 with dt = 0.03 using RHS created at 1.425 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 48000 cells Cloud fraction 1.41 0 Coarse STEP 48 ends. TIME = 1.44 DT = 0.03 Timestep time = 0.132245386 seconds. TIME= 1.44 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00048 3DPlotfile write time = 0.015895221 seconds. 1-01-01 00:00:02.559998 (1.44 s elapsed) Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218272 Fixed dt at level 0 is: 0.03 [Level 0 step 49] ADVANCE from elapsed time = 1.44 to 1.47 with dt = 0.03 Making slow rhs at time 1.44 for fast variables advancing from 1.44 to 1.45 No-substepping time integration at level 0 to 1.45 with dt = 0.01 Time integration of scalars at level 0 from 1.44 to 1.45 with dt = 0.01 using RHS created at 1.44 Making slow rhs at time 1.45 for fast variables advancing from 1.44 to 1.455 No-substepping time integration at level 0 to 1.455 with dt = 0.015 Time integration of scalars at level 0 from 1.44 to 1.455 with dt = 0.015 using RHS created at 1.45 Making slow rhs at time 1.455 for fast variables advancing from 1.44 to 1.47 No-substepping time integration at level 0 to 1.47 with dt = 0.03 Time integration of scalars at level 0 from 1.44 to 1.47 with dt = 0.03 using RHS created at 1.455 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 48000 cells Cloud fraction 1.44 0 Coarse STEP 49 ends. TIME = 1.47 DT = 0.03 Timestep time = 0.132991529 seconds. TIME= 1.47 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00049 3DPlotfile write time = 0.030677429 seconds. 1-01-01 00:00:02.529999 (1.47 s elapsed) Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218083 Fixed dt at level 0 is: 0.03 [Level 0 step 50] ADVANCE from elapsed time = 1.47 to 1.5 with dt = 0.03 Making slow rhs at time 1.47 for fast variables advancing from 1.47 to 1.48 No-substepping time integration at level 0 to 1.48 with dt = 0.01 Time integration of scalars at level 0 from 1.47 to 1.48 with dt = 0.01 using RHS created at 1.47 Making slow rhs at time 1.48 for fast variables advancing from 1.47 to 1.485 No-substepping time integration at level 0 to 1.485 with dt = 0.015 Time integration of scalars at level 0 from 1.47 to 1.485 with dt = 0.015 using RHS created at 1.48 Making slow rhs at time 1.485 for fast variables advancing from 1.47 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.03 Time integration of scalars at level 0 from 1.47 to 1.5 with dt = 0.03 using RHS created at 1.485 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 48000 cells Cloud fraction 1.47 0 Coarse STEP 50 ends. TIME = 1.5 DT = 0.03 Timestep time = 0.131017111 seconds. TIME= 1.5 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00050 3DPlotfile write time = 0.052993012 seconds. Writing native checkpoint EkmanSpiral_ideal_restart_chk00050 Writing Lat/Lon variables at level 0 Checkpoint write time = 0.043889523 seconds. Total Time: 8.765593011 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [1] AMReX (26.07-16-g2d4861ab916b) finalized Initializing AMReX (26.07-16-g2d4861ab916b)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.07-16-g2d4861ab916b) initialized Successfully read inputs file ... ERF git hash: 3604eb07-dirty AMReX git hash: 26.07-16-g2d4861ab91 Problem name (from inputs file) is: "Ekman Spiral" Reading NC init file names at level 0 and index 0 : wrfinput_ekman_d01 Level 0 is land Coriolis frequency, f = 0.000145842318 1/s Using constant dynamic diffusion coefficients momentum : 5 kg/(m-s) temperature : 0 kg/(m-s) scalar : 0 kg/(m-s) Thermal stratification based on gradient of potential temperature Reading Times wrfinput datetime 0 : 0001-01-01_00:00:00 -62135596800 Have read start_time string at level 0 is 0001-01-01_00:00:00 Have read start_time number at level 0 is -6.21355968e+10 Maximum simulation length based on stop_time: 1000 s (elapsed) Adding stop time 1000 to start_time -6.21355968e+10 Null land surface model! SOLVER CHOICE: At level 0 : compressible with no substepping vert_implicit_fac at level : 0 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 1 use_gravity : 1 Moisture Model: Saturation Adjustment Terrain Type: StaticFittedMesh Buildings Type: None Mesh Type: VariableDz ABL Driver Type: Geostrophic Wind (-0,0.00218763477,-1.339539959e-19) Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 5 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Restart from native checkpoint EkmanSpiral_ideal_restart_chk00025 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (7,5,399) (0,0,0)) ((8,0,0) (11,5,399) (0,0,0)) ((0,6,0) (7,9,399) (0,0,0)) ((8,6,0) (11,9,399) (0,0,0)) ) Reading SST data Reading TSK data Reading LMASK data Reading Lat/Lon variables Restart time = 0.043884453 seconds. smallest grid spacing at level 0 = 11.61203491 dt at level 0 = 0.03 Viscous CFL is 0.0005562174344 Max value of |p_hse - p_eos| is less than 1e-8 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Min/max value of x-gradient of full (moist) pressure are zero Min/max value of y-gradient of full (moist) pressure are zero Min/max value of moist dp/dz + rho_m*|g| are -2.895284013e-11 2.828848267e-11 with min at face (7,5,64) with max at face (7,5,101) Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00025 3DPlotfile write time = 0.262999011 seconds. TIME= 0.75 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 1-01-01 00:00:01.250000 (0.75 s elapsed) Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222609 Fixed dt at level 0 is: 0.03 [Level 0 step 26] ADVANCE from elapsed time = 0.75 to 0.78 with dt = 0.03 Making slow rhs at time 0.75 for fast variables advancing from 0.75 to 0.76 No-substepping time integration at level 0 to 0.76 with dt = 0.01 Time integration of scalars at level 0 from 0.75 to 0.76 with dt = 0.01 using RHS created at 0.75 Making slow rhs at time 0.76 for fast variables advancing from 0.75 to 0.765 No-substepping time integration at level 0 to 0.765 with dt = 0.015 Time integration of scalars at level 0 from 0.75 to 0.765 with dt = 0.015 using RHS created at 0.76 Making slow rhs at time 0.765 for fast variables advancing from 0.75 to 0.78 No-substepping time integration at level 0 to 0.78 with dt = 0.03 Time integration of scalars at level 0 from 0.75 to 0.78 with dt = 0.03 using RHS created at 0.765 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 48000 cells Cloud fraction 0.75 0 Coarse STEP 26 ends. TIME = 0.78 DT = 0.03 Timestep time = 0.131677908 seconds. TIME= 0.78 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00026 3DPlotfile write time = 0.013365042 seconds. 1-01-01 00:00:01.220001 (0.78 s elapsed) Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222421 Fixed dt at level 0 is: 0.03 [Level 0 step 27] ADVANCE from elapsed time = 0.78 to 0.81 with dt = 0.03 Making slow rhs at time 0.78 for fast variables advancing from 0.78 to 0.79 No-substepping time integration at level 0 to 0.79 with dt = 0.01 Time integration of scalars at level 0 from 0.78 to 0.79 with dt = 0.01 using RHS created at 0.78 Making slow rhs at time 0.79 for fast variables advancing from 0.78 to 0.795 No-substepping time integration at level 0 to 0.795 with dt = 0.015 Time integration of scalars at level 0 from 0.78 to 0.795 with dt = 0.015 using RHS created at 0.79 Making slow rhs at time 0.795 for fast variables advancing from 0.78 to 0.81 No-substepping time integration at level 0 to 0.81 with dt = 0.03 Time integration of scalars at level 0 from 0.78 to 0.81 with dt = 0.03 using RHS created at 0.795 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 48000 cells Cloud fraction 0.78 0 Coarse STEP 27 ends. TIME = 0.81 DT = 0.03 Timestep time = 0.132337962 seconds. TIME= 0.81 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00027 3DPlotfile write time = 0.015714984 seconds. 1-01-01 00:00:01.190002 (0.81 s elapsed) Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222232 Fixed dt at level 0 is: 0.03 [Level 0 step 28] ADVANCE from elapsed time = 0.81 to 0.84 with dt = 0.03 Making slow rhs at time 0.81 for fast variables advancing from 0.81 to 0.82 No-substepping time integration at level 0 to 0.82 with dt = 0.01 Time integration of scalars at level 0 from 0.81 to 0.82 with dt = 0.01 using RHS created at 0.81 Making slow rhs at time 0.82 for fast variables advancing from 0.81 to 0.825 No-substepping time integration at level 0 to 0.825 with dt = 0.015 Time integration of scalars at level 0 from 0.81 to 0.825 with dt = 0.015 using RHS created at 0.82 Making slow rhs at time 0.825 for fast variables advancing from 0.81 to 0.84 No-substepping time integration at level 0 to 0.84 with dt = 0.03 Time integration of scalars at level 0 from 0.81 to 0.84 with dt = 0.03 using RHS created at 0.825 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 48000 cells Cloud fraction 0.81 0 Coarse STEP 28 ends. TIME = 0.84 DT = 0.03 Timestep time = 0.137889234 seconds. TIME= 0.84 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00028 3DPlotfile write time = 0.013834659 seconds. 1-01-01 00:00:01.160004 (0.84 s elapsed) Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810222044 Fixed dt at level 0 is: 0.03 [Level 0 step 29] ADVANCE from elapsed time = 0.84 to 0.87 with dt = 0.03 Making slow rhs at time 0.84 for fast variables advancing from 0.84 to 0.85 No-substepping time integration at level 0 to 0.85 with dt = 0.01 Time integration of scalars at level 0 from 0.84 to 0.85 with dt = 0.01 using RHS created at 0.84 Making slow rhs at time 0.85 for fast variables advancing from 0.84 to 0.855 No-substepping time integration at level 0 to 0.855 with dt = 0.015 Time integration of scalars at level 0 from 0.84 to 0.855 with dt = 0.015 using RHS created at 0.85 Making slow rhs at time 0.855 for fast variables advancing from 0.84 to 0.87 No-substepping time integration at level 0 to 0.87 with dt = 0.03 Time integration of scalars at level 0 from 0.84 to 0.87 with dt = 0.03 using RHS created at 0.855 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 48000 cells Cloud fraction 0.84 0 Coarse STEP 29 ends. TIME = 0.87 DT = 0.03 Timestep time = 0.131817331 seconds. TIME= 0.87 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00029 3DPlotfile write time = 0.013155738 seconds. 1-01-01 00:00:01.129997 (0.87 s elapsed) Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221856 Fixed dt at level 0 is: 0.03 [Level 0 step 30] ADVANCE from elapsed time = 0.87 to 0.9 with dt = 0.03 Making slow rhs at time 0.87 for fast variables advancing from 0.87 to 0.88 No-substepping time integration at level 0 to 0.88 with dt = 0.01 Time integration of scalars at level 0 from 0.87 to 0.88 with dt = 0.01 using RHS created at 0.87 Making slow rhs at time 0.88 for fast variables advancing from 0.87 to 0.885 No-substepping time integration at level 0 to 0.885 with dt = 0.015 Time integration of scalars at level 0 from 0.87 to 0.885 with dt = 0.015 using RHS created at 0.88 Making slow rhs at time 0.885 for fast variables advancing from 0.87 to 0.9 No-substepping time integration at level 0 to 0.9 with dt = 0.03 Time integration of scalars at level 0 from 0.87 to 0.9 with dt = 0.03 using RHS created at 0.885 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 48000 cells Cloud fraction 0.87 0 Coarse STEP 30 ends. TIME = 0.9 DT = 0.03 Timestep time = 0.131945261 seconds. TIME= 0.9 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00030 3DPlotfile write time = 0.013525708 seconds. 1-01-01 00:00:01.099998 (0.9 s elapsed) Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221667 Fixed dt at level 0 is: 0.03 [Level 0 step 31] ADVANCE from elapsed time = 0.9 to 0.93 with dt = 0.03 Making slow rhs at time 0.9 for fast variables advancing from 0.9 to 0.91 No-substepping time integration at level 0 to 0.91 with dt = 0.01 Time integration of scalars at level 0 from 0.9 to 0.91 with dt = 0.01 using RHS created at 0.9 Making slow rhs at time 0.91 for fast variables advancing from 0.9 to 0.915 No-substepping time integration at level 0 to 0.915 with dt = 0.015 Time integration of scalars at level 0 from 0.9 to 0.915 with dt = 0.015 using RHS created at 0.91 Making slow rhs at time 0.915 for fast variables advancing from 0.9 to 0.93 No-substepping time integration at level 0 to 0.93 with dt = 0.03 Time integration of scalars at level 0 from 0.9 to 0.93 with dt = 0.03 using RHS created at 0.915 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 48000 cells Cloud fraction 0.9 0 Coarse STEP 31 ends. TIME = 0.93 DT = 0.03 Timestep time = 0.131169213 seconds. TIME= 0.93 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00031 3DPlotfile write time = 0.01446793 seconds. 1-01-01 00:00:01.070000 (0.93 s elapsed) Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221479 Fixed dt at level 0 is: 0.03 [Level 0 step 32] ADVANCE from elapsed time = 0.93 to 0.96 with dt = 0.03 Making slow rhs at time 0.93 for fast variables advancing from 0.93 to 0.94 No-substepping time integration at level 0 to 0.94 with dt = 0.01 Time integration of scalars at level 0 from 0.93 to 0.94 with dt = 0.01 using RHS created at 0.93 Making slow rhs at time 0.94 for fast variables advancing from 0.93 to 0.945 No-substepping time integration at level 0 to 0.945 with dt = 0.015 Time integration of scalars at level 0 from 0.93 to 0.945 with dt = 0.015 using RHS created at 0.94 Making slow rhs at time 0.945 for fast variables advancing from 0.93 to 0.96 No-substepping time integration at level 0 to 0.96 with dt = 0.03 Time integration of scalars at level 0 from 0.93 to 0.96 with dt = 0.03 using RHS created at 0.945 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 48000 cells Cloud fraction 0.93 0 Coarse STEP 32 ends. TIME = 0.96 DT = 0.03 Timestep time = 0.131397418 seconds. TIME= 0.96 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00032 3DPlotfile write time = 0.013567893 seconds. 1-01-01 00:00:01.040001 (0.96 s elapsed) Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221291 Fixed dt at level 0 is: 0.03 [Level 0 step 33] ADVANCE from elapsed time = 0.96 to 0.99 with dt = 0.03 Making slow rhs at time 0.96 for fast variables advancing from 0.96 to 0.97 No-substepping time integration at level 0 to 0.97 with dt = 0.01 Time integration of scalars at level 0 from 0.96 to 0.97 with dt = 0.01 using RHS created at 0.96 Making slow rhs at time 0.97 for fast variables advancing from 0.96 to 0.975 No-substepping time integration at level 0 to 0.975 with dt = 0.015 Time integration of scalars at level 0 from 0.96 to 0.975 with dt = 0.015 using RHS created at 0.97 Making slow rhs at time 0.975 for fast variables advancing from 0.96 to 0.99 No-substepping time integration at level 0 to 0.99 with dt = 0.03 Time integration of scalars at level 0 from 0.96 to 0.99 with dt = 0.03 using RHS created at 0.975 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 48000 cells Cloud fraction 0.96 0 Coarse STEP 33 ends. TIME = 0.99 DT = 0.03 Timestep time = 0.131618468 seconds. TIME= 0.99 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00033 3DPlotfile write time = 0.01432114 seconds. 1-01-01 00:00:01.010002 (0.99 s elapsed) Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810221102 Fixed dt at level 0 is: 0.03 [Level 0 step 34] ADVANCE from elapsed time = 0.99 to 1.02 with dt = 0.03 Making slow rhs at time 0.99 for fast variables advancing from 0.99 to 1 No-substepping time integration at level 0 to 1 with dt = 0.01 Time integration of scalars at level 0 from 0.99 to 1 with dt = 0.01 using RHS created at 0.99 Making slow rhs at time 1 for fast variables advancing from 0.99 to 1.005 No-substepping time integration at level 0 to 1.005 with dt = 0.015 Time integration of scalars at level 0 from 0.99 to 1.005 with dt = 0.015 using RHS created at 1 Making slow rhs at time 1.005 for fast variables advancing from 0.99 to 1.02 No-substepping time integration at level 0 to 1.02 with dt = 0.03 Time integration of scalars at level 0 from 0.99 to 1.02 with dt = 0.03 using RHS created at 1.005 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 48000 cells Cloud fraction 0.99 0 Coarse STEP 34 ends. TIME = 1.02 DT = 0.03 Timestep time = 0.131495372 seconds. TIME= 1.02 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00034 3DPlotfile write time = 0.014467072 seconds. 1-01-01 00:00:02.980003 (1.02 s elapsed) Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220914 Fixed dt at level 0 is: 0.03 [Level 0 step 35] ADVANCE from elapsed time = 1.02 to 1.05 with dt = 0.03 Making slow rhs at time 1.02 for fast variables advancing from 1.02 to 1.03 No-substepping time integration at level 0 to 1.03 with dt = 0.01 Time integration of scalars at level 0 from 1.02 to 1.03 with dt = 0.01 using RHS created at 1.02 Making slow rhs at time 1.03 for fast variables advancing from 1.02 to 1.035 No-substepping time integration at level 0 to 1.035 with dt = 0.015 Time integration of scalars at level 0 from 1.02 to 1.035 with dt = 0.015 using RHS created at 1.03 Making slow rhs at time 1.035 for fast variables advancing from 1.02 to 1.05 No-substepping time integration at level 0 to 1.05 with dt = 0.03 Time integration of scalars at level 0 from 1.02 to 1.05 with dt = 0.03 using RHS created at 1.035 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 48000 cells Cloud fraction 1.02 0 Coarse STEP 35 ends. TIME = 1.05 DT = 0.03 Timestep time = 0.132233674 seconds. TIME= 1.05 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00035 3DPlotfile write time = 0.014041876 seconds. 1-01-01 00:00:02.949997 (1.05 s elapsed) Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220725 Fixed dt at level 0 is: 0.03 [Level 0 step 36] ADVANCE from elapsed time = 1.05 to 1.08 with dt = 0.03 Making slow rhs at time 1.05 for fast variables advancing from 1.05 to 1.06 No-substepping time integration at level 0 to 1.06 with dt = 0.01 Time integration of scalars at level 0 from 1.05 to 1.06 with dt = 0.01 using RHS created at 1.05 Making slow rhs at time 1.06 for fast variables advancing from 1.05 to 1.065 No-substepping time integration at level 0 to 1.065 with dt = 0.015 Time integration of scalars at level 0 from 1.05 to 1.065 with dt = 0.015 using RHS created at 1.06 Making slow rhs at time 1.065 for fast variables advancing from 1.05 to 1.08 No-substepping time integration at level 0 to 1.08 with dt = 0.03 Time integration of scalars at level 0 from 1.05 to 1.08 with dt = 0.03 using RHS created at 1.065 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 48000 cells Cloud fraction 1.05 0 Coarse STEP 36 ends. TIME = 1.08 DT = 0.03 Timestep time = 0.132587145 seconds. TIME= 1.08 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00036 3DPlotfile write time = 0.013859695 seconds. 1-01-01 00:00:02.919998 (1.08 s elapsed) Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220537 Fixed dt at level 0 is: 0.03 [Level 0 step 37] ADVANCE from elapsed time = 1.08 to 1.11 with dt = 0.03 Making slow rhs at time 1.08 for fast variables advancing from 1.08 to 1.09 No-substepping time integration at level 0 to 1.09 with dt = 0.01 Time integration of scalars at level 0 from 1.08 to 1.09 with dt = 0.01 using RHS created at 1.08 Making slow rhs at time 1.09 for fast variables advancing from 1.08 to 1.095 No-substepping time integration at level 0 to 1.095 with dt = 0.015 Time integration of scalars at level 0 from 1.08 to 1.095 with dt = 0.015 using RHS created at 1.09 Making slow rhs at time 1.095 for fast variables advancing from 1.08 to 1.11 No-substepping time integration at level 0 to 1.11 with dt = 0.03 Time integration of scalars at level 0 from 1.08 to 1.11 with dt = 0.03 using RHS created at 1.095 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 48000 cells Cloud fraction 1.08 0 Coarse STEP 37 ends. TIME = 1.11 DT = 0.03 Timestep time = 0.131199903 seconds. TIME= 1.11 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00037 3DPlotfile write time = 0.014277756 seconds. 1-01-01 00:00:02.889999 (1.11 s elapsed) Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810220348 Fixed dt at level 0 is: 0.03 [Level 0 step 38] ADVANCE from elapsed time = 1.11 to 1.14 with dt = 0.03 Making slow rhs at time 1.11 for fast variables advancing from 1.11 to 1.12 No-substepping time integration at level 0 to 1.12 with dt = 0.01 Time integration of scalars at level 0 from 1.11 to 1.12 with dt = 0.01 using RHS created at 1.11 Making slow rhs at time 1.12 for fast variables advancing from 1.11 to 1.125 No-substepping time integration at level 0 to 1.125 with dt = 0.015 Time integration of scalars at level 0 from 1.11 to 1.125 with dt = 0.015 using RHS created at 1.12 Making slow rhs at time 1.125 for fast variables advancing from 1.11 to 1.14 No-substepping time integration at level 0 to 1.14 with dt = 0.03 Time integration of scalars at level 0 from 1.11 to 1.14 with dt = 0.03 using RHS created at 1.125 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 48000 cells Cloud fraction 1.11 0 Coarse STEP 38 ends. TIME = 1.14 DT = 0.03 Timestep time = 0.130834555 seconds. TIME= 1.14 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00038 3DPlotfile write time = 0.014065235 seconds. 1-01-01 00:00:02.860001 (1.14 s elapsed) Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.781022016 Fixed dt at level 0 is: 0.03 [Level 0 step 39] ADVANCE from elapsed time = 1.14 to 1.17 with dt = 0.03 Making slow rhs at time 1.14 for fast variables advancing from 1.14 to 1.15 No-substepping time integration at level 0 to 1.15 with dt = 0.01 Time integration of scalars at level 0 from 1.14 to 1.15 with dt = 0.01 using RHS created at 1.14 Making slow rhs at time 1.15 for fast variables advancing from 1.14 to 1.155 No-substepping time integration at level 0 to 1.155 with dt = 0.015 Time integration of scalars at level 0 from 1.14 to 1.155 with dt = 0.015 using RHS created at 1.15 Making slow rhs at time 1.155 for fast variables advancing from 1.14 to 1.17 No-substepping time integration at level 0 to 1.17 with dt = 0.03 Time integration of scalars at level 0 from 1.14 to 1.17 with dt = 0.03 using RHS created at 1.155 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 48000 cells Cloud fraction 1.14 0 Coarse STEP 39 ends. TIME = 1.17 DT = 0.03 Timestep time = 0.131588746 seconds. TIME= 1.17 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00039 3DPlotfile write time = 0.013500645 seconds. 1-01-01 00:00:02.830002 (1.17 s elapsed) Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219971 Fixed dt at level 0 is: 0.03 [Level 0 step 40] ADVANCE from elapsed time = 1.17 to 1.2 with dt = 0.03 Making slow rhs at time 1.17 for fast variables advancing from 1.17 to 1.18 No-substepping time integration at level 0 to 1.18 with dt = 0.01 Time integration of scalars at level 0 from 1.17 to 1.18 with dt = 0.01 using RHS created at 1.17 Making slow rhs at time 1.18 for fast variables advancing from 1.17 to 1.185 No-substepping time integration at level 0 to 1.185 with dt = 0.015 Time integration of scalars at level 0 from 1.17 to 1.185 with dt = 0.015 using RHS created at 1.18 Making slow rhs at time 1.185 for fast variables advancing from 1.17 to 1.2 No-substepping time integration at level 0 to 1.2 with dt = 0.03 Time integration of scalars at level 0 from 1.17 to 1.2 with dt = 0.03 using RHS created at 1.185 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 48000 cells Cloud fraction 1.17 0 Coarse STEP 40 ends. TIME = 1.2 DT = 0.03 Timestep time = 0.13090396 seconds. TIME= 1.2 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00040 3DPlotfile write time = 0.014343778 seconds. 1-01-01 00:00:02.800003 (1.2 s elapsed) Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219782 Fixed dt at level 0 is: 0.03 [Level 0 step 41] ADVANCE from elapsed time = 1.2 to 1.23 with dt = 0.03 Making slow rhs at time 1.2 for fast variables advancing from 1.2 to 1.21 No-substepping time integration at level 0 to 1.21 with dt = 0.01 Time integration of scalars at level 0 from 1.2 to 1.21 with dt = 0.01 using RHS created at 1.2 Making slow rhs at time 1.21 for fast variables advancing from 1.2 to 1.215 No-substepping time integration at level 0 to 1.215 with dt = 0.015 Time integration of scalars at level 0 from 1.2 to 1.215 with dt = 0.015 using RHS created at 1.21 Making slow rhs at time 1.215 for fast variables advancing from 1.2 to 1.23 No-substepping time integration at level 0 to 1.23 with dt = 0.03 Time integration of scalars at level 0 from 1.2 to 1.23 with dt = 0.03 using RHS created at 1.215 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 48000 cells Cloud fraction 1.2 0 Coarse STEP 41 ends. TIME = 1.23 DT = 0.03 Timestep time = 0.130630234 seconds. TIME= 1.23 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00041 3DPlotfile write time = 0.01354259 seconds. 1-01-01 00:00:02.769997 (1.23 s elapsed) Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219594 Fixed dt at level 0 is: 0.03 [Level 0 step 42] ADVANCE from elapsed time = 1.23 to 1.26 with dt = 0.03 Making slow rhs at time 1.23 for fast variables advancing from 1.23 to 1.24 No-substepping time integration at level 0 to 1.24 with dt = 0.01 Time integration of scalars at level 0 from 1.23 to 1.24 with dt = 0.01 using RHS created at 1.23 Making slow rhs at time 1.24 for fast variables advancing from 1.23 to 1.245 No-substepping time integration at level 0 to 1.245 with dt = 0.015 Time integration of scalars at level 0 from 1.23 to 1.245 with dt = 0.015 using RHS created at 1.24 Making slow rhs at time 1.245 for fast variables advancing from 1.23 to 1.26 No-substepping time integration at level 0 to 1.26 with dt = 0.03 Time integration of scalars at level 0 from 1.23 to 1.26 with dt = 0.03 using RHS created at 1.245 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 48000 cells Cloud fraction 1.23 0 Coarse STEP 42 ends. TIME = 1.26 DT = 0.03 Timestep time = 0.130841343 seconds. TIME= 1.26 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00042 3DPlotfile write time = 0.014047515 seconds. 1-01-01 00:00:02.739998 (1.26 s elapsed) Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219405 Fixed dt at level 0 is: 0.03 [Level 0 step 43] ADVANCE from elapsed time = 1.26 to 1.29 with dt = 0.03 Making slow rhs at time 1.26 for fast variables advancing from 1.26 to 1.27 No-substepping time integration at level 0 to 1.27 with dt = 0.01 Time integration of scalars at level 0 from 1.26 to 1.27 with dt = 0.01 using RHS created at 1.26 Making slow rhs at time 1.27 for fast variables advancing from 1.26 to 1.275 No-substepping time integration at level 0 to 1.275 with dt = 0.015 Time integration of scalars at level 0 from 1.26 to 1.275 with dt = 0.015 using RHS created at 1.27 Making slow rhs at time 1.275 for fast variables advancing from 1.26 to 1.29 No-substepping time integration at level 0 to 1.29 with dt = 0.03 Time integration of scalars at level 0 from 1.26 to 1.29 with dt = 0.03 using RHS created at 1.275 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 48000 cells Cloud fraction 1.26 0 Coarse STEP 43 ends. TIME = 1.29 DT = 0.03 Timestep time = 0.131048435 seconds. TIME= 1.29 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00043 3DPlotfile write time = 0.013432669 seconds. 1-01-01 00:00:02.709999 (1.29 s elapsed) Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219216 Fixed dt at level 0 is: 0.03 [Level 0 step 44] ADVANCE from elapsed time = 1.29 to 1.32 with dt = 0.03 Making slow rhs at time 1.29 for fast variables advancing from 1.29 to 1.3 No-substepping time integration at level 0 to 1.3 with dt = 0.01 Time integration of scalars at level 0 from 1.29 to 1.3 with dt = 0.01 using RHS created at 1.29 Making slow rhs at time 1.3 for fast variables advancing from 1.29 to 1.305 No-substepping time integration at level 0 to 1.305 with dt = 0.015 Time integration of scalars at level 0 from 1.29 to 1.305 with dt = 0.015 using RHS created at 1.3 Making slow rhs at time 1.305 for fast variables advancing from 1.29 to 1.32 No-substepping time integration at level 0 to 1.32 with dt = 0.03 Time integration of scalars at level 0 from 1.29 to 1.32 with dt = 0.03 using RHS created at 1.305 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 48000 cells Cloud fraction 1.29 0 Coarse STEP 44 ends. TIME = 1.32 DT = 0.03 Timestep time = 0.130665981 seconds. TIME= 1.32 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00044 3DPlotfile write time = 0.017702943 seconds. 1-01-01 00:00:02.680000 (1.32 s elapsed) Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810219027 Fixed dt at level 0 is: 0.03 [Level 0 step 45] ADVANCE from elapsed time = 1.32 to 1.35 with dt = 0.03 Making slow rhs at time 1.32 for fast variables advancing from 1.32 to 1.33 No-substepping time integration at level 0 to 1.33 with dt = 0.01 Time integration of scalars at level 0 from 1.32 to 1.33 with dt = 0.01 using RHS created at 1.32 Making slow rhs at time 1.33 for fast variables advancing from 1.32 to 1.335 No-substepping time integration at level 0 to 1.335 with dt = 0.015 Time integration of scalars at level 0 from 1.32 to 1.335 with dt = 0.015 using RHS created at 1.33 Making slow rhs at time 1.335 for fast variables advancing from 1.32 to 1.35 No-substepping time integration at level 0 to 1.35 with dt = 0.03 Time integration of scalars at level 0 from 1.32 to 1.35 with dt = 0.03 using RHS created at 1.335 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 48000 cells Cloud fraction 1.32 0 Coarse STEP 45 ends. TIME = 1.35 DT = 0.03 Timestep time = 0.130911358 seconds. TIME= 1.35 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00045 3DPlotfile write time = 0.014312674 seconds. 1-01-01 00:00:02.650002 (1.35 s elapsed) Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218838 Fixed dt at level 0 is: 0.03 [Level 0 step 46] ADVANCE from elapsed time = 1.35 to 1.38 with dt = 0.03 Making slow rhs at time 1.35 for fast variables advancing from 1.35 to 1.36 No-substepping time integration at level 0 to 1.36 with dt = 0.01 Time integration of scalars at level 0 from 1.35 to 1.36 with dt = 0.01 using RHS created at 1.35 Making slow rhs at time 1.36 for fast variables advancing from 1.35 to 1.365 No-substepping time integration at level 0 to 1.365 with dt = 0.015 Time integration of scalars at level 0 from 1.35 to 1.365 with dt = 0.015 using RHS created at 1.36 Making slow rhs at time 1.365 for fast variables advancing from 1.35 to 1.38 No-substepping time integration at level 0 to 1.38 with dt = 0.03 Time integration of scalars at level 0 from 1.35 to 1.38 with dt = 0.03 using RHS created at 1.365 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 48000 cells Cloud fraction 1.35 0 Coarse STEP 46 ends. TIME = 1.38 DT = 0.03 Timestep time = 0.131176933 seconds. TIME= 1.38 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00046 3DPlotfile write time = 0.013805113 seconds. 1-01-01 00:00:02.620003 (1.38 s elapsed) Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.781021865 Fixed dt at level 0 is: 0.03 [Level 0 step 47] ADVANCE from elapsed time = 1.38 to 1.41 with dt = 0.03 Making slow rhs at time 1.38 for fast variables advancing from 1.38 to 1.39 No-substepping time integration at level 0 to 1.39 with dt = 0.01 Time integration of scalars at level 0 from 1.38 to 1.39 with dt = 0.01 using RHS created at 1.38 Making slow rhs at time 1.39 for fast variables advancing from 1.38 to 1.395 No-substepping time integration at level 0 to 1.395 with dt = 0.015 Time integration of scalars at level 0 from 1.38 to 1.395 with dt = 0.015 using RHS created at 1.39 Making slow rhs at time 1.395 for fast variables advancing from 1.38 to 1.41 No-substepping time integration at level 0 to 1.41 with dt = 0.03 Time integration of scalars at level 0 from 1.38 to 1.41 with dt = 0.03 using RHS created at 1.395 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 48000 cells Cloud fraction 1.38 0 Coarse STEP 47 ends. TIME = 1.41 DT = 0.03 Timestep time = 0.130613986 seconds. TIME= 1.41 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00047 3DPlotfile write time = 0.014656732 seconds. 1-01-01 00:00:02.589996 (1.41 s elapsed) Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218461 Fixed dt at level 0 is: 0.03 [Level 0 step 48] ADVANCE from elapsed time = 1.41 to 1.44 with dt = 0.03 Making slow rhs at time 1.41 for fast variables advancing from 1.41 to 1.42 No-substepping time integration at level 0 to 1.42 with dt = 0.01 Time integration of scalars at level 0 from 1.41 to 1.42 with dt = 0.01 using RHS created at 1.41 Making slow rhs at time 1.42 for fast variables advancing from 1.41 to 1.425 No-substepping time integration at level 0 to 1.425 with dt = 0.015 Time integration of scalars at level 0 from 1.41 to 1.425 with dt = 0.015 using RHS created at 1.42 Making slow rhs at time 1.425 for fast variables advancing from 1.41 to 1.44 No-substepping time integration at level 0 to 1.44 with dt = 0.03 Time integration of scalars at level 0 from 1.41 to 1.44 with dt = 0.03 using RHS created at 1.425 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 48000 cells Cloud fraction 1.41 0 Coarse STEP 48 ends. TIME = 1.44 DT = 0.03 Timestep time = 0.131021247 seconds. TIME= 1.44 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00048 3DPlotfile write time = 0.014298956 seconds. 1-01-01 00:00:02.559998 (1.44 s elapsed) Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218272 Fixed dt at level 0 is: 0.03 [Level 0 step 49] ADVANCE from elapsed time = 1.44 to 1.47 with dt = 0.03 Making slow rhs at time 1.44 for fast variables advancing from 1.44 to 1.45 No-substepping time integration at level 0 to 1.45 with dt = 0.01 Time integration of scalars at level 0 from 1.44 to 1.45 with dt = 0.01 using RHS created at 1.44 Making slow rhs at time 1.45 for fast variables advancing from 1.44 to 1.455 No-substepping time integration at level 0 to 1.455 with dt = 0.015 Time integration of scalars at level 0 from 1.44 to 1.455 with dt = 0.015 using RHS created at 1.45 Making slow rhs at time 1.455 for fast variables advancing from 1.44 to 1.47 No-substepping time integration at level 0 to 1.47 with dt = 0.03 Time integration of scalars at level 0 from 1.44 to 1.47 with dt = 0.03 using RHS created at 1.455 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 48000 cells Cloud fraction 1.44 0 Coarse STEP 49 ends. TIME = 1.47 DT = 0.03 Timestep time = 0.131483821 seconds. TIME= 1.47 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00049 3DPlotfile write time = 0.013302245 seconds. 1-01-01 00:00:02.529999 (1.47 s elapsed) Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.0334495526 Anelastic dt at level 0 would be: 0.7810218083 Fixed dt at level 0 is: 0.03 [Level 0 step 50] ADVANCE from elapsed time = 1.47 to 1.5 with dt = 0.03 Making slow rhs at time 1.47 for fast variables advancing from 1.47 to 1.48 No-substepping time integration at level 0 to 1.48 with dt = 0.01 Time integration of scalars at level 0 from 1.47 to 1.48 with dt = 0.01 using RHS created at 1.47 Making slow rhs at time 1.48 for fast variables advancing from 1.47 to 1.485 No-substepping time integration at level 0 to 1.485 with dt = 0.015 Time integration of scalars at level 0 from 1.47 to 1.485 with dt = 0.015 using RHS created at 1.48 Making slow rhs at time 1.485 for fast variables advancing from 1.47 to 1.5 No-substepping time integration at level 0 to 1.5 with dt = 0.03 Time integration of scalars at level 0 from 1.47 to 1.5 with dt = 0.03 using RHS created at 1.485 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 48000 cells Cloud fraction 1.47 0 Coarse STEP 50 ends. TIME = 1.5 DT = 0.03 Timestep time = 0.131440642 seconds. TIME= 1.5 MASS = 88496957.78 RHO THETA = 2.654908733e+10 RHO SCALAR = 0 RHO QTOTAL = 0 Writing native 3D plotfile EkmanSpiral_ideal_restart_plt00050 3DPlotfile write time = 0.014047936 seconds. Total Time: 4.074020304 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] AMReX (26.07-16-g2d4861ab916b) finalized