Initializing AMReX (26.07-34-g922e54823e49)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.07-34-g922e54823e49) initialized Successfully read inputs file ... ERF git hash: 7eadff1b-dirty AMReX git hash: 26.07-34-g922e54823e Problem name (from inputs file) is: "Scalar Advection/Diffusion" Level 0 is land Using constant dynamic diffusion coefficients momentum : 0 kg/(m-s) temperature : 0 kg/(m-s) scalar : 1 kg/(m-s) Thermal stratification based on gradient of potential temperature Null land surface model! SOLVER CHOICE: At level 0 : compressible with implicit substepping vert_implicit_fac at level 0 : 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 0 use_gravity : 0 Moisture Model: None Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: None Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd dryscal_vert_adv_type : Upwind_3rd moistscal_horiz_adv_type : WENO3 moistscal_vert_adv_type : WENO3 Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 1 dynamic_viscosity : 0 Using constant molecular diffusivity (relevant for DNS) Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using DNS model at level 0 Creating new distribution map on level: 0 BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(16) m_ref->m_hash_sig(0) ((0,0,0) (7,7,31) (0,0,0)) ((8,0,0) (15,7,31) (0,0,0)) ((16,0,0) (23,7,31) (0,0,0)) ((24,0,0) (31,7,31) (0,0,0)) ((0,8,0) (7,15,31) (0,0,0)) ((8,8,0) (15,15,31) (0,0,0)) ((16,8,0) (23,15,31) (0,0,0)) ((24,8,0) (31,15,31) (0,0,0)) ((0,16,0) (7,23,31) (0,0,0)) ((8,16,0) (15,23,31) (0,0,0)) ((16,16,0) (23,23,31) (0,0,0)) ((24,16,0) (31,23,31) (0,0,0)) ((0,24,0) (7,31,31) (0,0,0)) ((8,24,0) (15,31,31) (0,0,0)) ((16,24,0) (23,31,31) (0,0,0)) ((24,24,0) (31,31,31) (0,0,0)) ) max of zphys_nd 1 max of zlevels 1 Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 Note: Molecular diffusion specified but dynamic_viscosity has not been specified Max value of |p_hse - p_eos| is less than 1e-8 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Writing native checkpoint ScalarAdvecDiffUniformU_chk00000 Checkpoint write time = 0.031122018 seconds. Writing native 3D plotfile ScalarAdvecDiffUniformU_plt00000 3DPlotfile write time = 0.029535888 seconds. TIME= 0 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 1] ADVANCE from elapsed time = 0 to 5e-05 with dt = 5e-05 Making slow rhs at time 0 for fast variables advancing from 0 to 1.666666666667e-05 Fast time integration at level 0 from 0 to 1.666666666667e-05 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0 to 1.666666666667e-05 with dt = 1.666666666667e-05 using RHS created at 0 Making slow rhs at time 1.666666666667e-05 for fast variables advancing from 0 to 2.5e-05 Fast time integration at level 0 from 0 to 2.5e-05 with dt = 2.5e-05 Time integration of scalars at level 0 from 0 to 2.5e-05 with dt = 2.5e-05 using RHS created at 1.666666666667e-05 Making slow rhs at time 2.5e-05 for fast variables advancing from 0 to 5e-05 Fast time integration at level 0 from 0 to 2.5e-05 with dt = 2.5e-05 Fast time integration at level 0 from 2.5e-05 to 5e-05 with dt = 2.5e-05 Time integration of scalars at level 0 from 0 to 5e-05 with dt = 5e-05 using RHS created at 2.5e-05 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 32768 cells Coarse STEP 1 ends. TIME = 5e-05 DT = 5e-05 Timestep time = 0.038402611 seconds. TIME= 5e-05 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 2] ADVANCE from elapsed time = 5e-05 to 0.0001 with dt = 5e-05 Making slow rhs at time 5e-05 for fast variables advancing from 5e-05 to 6.666666666667e-05 Fast time integration at level 0 from 5e-05 to 6.666666666667e-05 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 5e-05 to 6.666666666667e-05 with dt = 1.666666666667e-05 using RHS created at 5e-05 Making slow rhs at time 6.666666666667e-05 for fast variables advancing from 5e-05 to 7.5e-05 Fast time integration at level 0 from 5e-05 to 7.5e-05 with dt = 2.5e-05 Time integration of scalars at level 0 from 5e-05 to 7.5e-05 with dt = 2.5e-05 using RHS created at 6.666666666667e-05 Making slow rhs at time 7.5e-05 for fast variables advancing from 5e-05 to 0.0001 Fast time integration at level 0 from 5e-05 to 7.5e-05 with dt = 2.5e-05 Fast time integration at level 0 from 7.5e-05 to 0.0001 with dt = 2.5e-05 Time integration of scalars at level 0 from 5e-05 to 0.0001 with dt = 5e-05 using RHS created at 7.5e-05 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 32768 cells Coarse STEP 2 ends. TIME = 0.0001 DT = 5e-05 Timestep time = 0.035019316 seconds. TIME= 0.0001 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 3] ADVANCE from elapsed time = 0.0001 to 0.00015 with dt = 5e-05 Making slow rhs at time 0.0001 for fast variables advancing from 0.0001 to 0.0001166666666667 Fast time integration at level 0 from 0.0001 to 0.0001166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0001 to 0.0001166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0001 Making slow rhs at time 0.0001166666666667 for fast variables advancing from 0.0001 to 0.000125 Fast time integration at level 0 from 0.0001 to 0.000125 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0001 to 0.000125 with dt = 2.5e-05 using RHS created at 0.0001166666666667 Making slow rhs at time 0.000125 for fast variables advancing from 0.0001 to 0.00015 Fast time integration at level 0 from 0.0001 to 0.000125 with dt = 2.5e-05 Fast time integration at level 0 from 0.000125 to 0.00015 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0001 to 0.00015 with dt = 5e-05 using RHS created at 0.000125 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 32768 cells Coarse STEP 3 ends. TIME = 0.00015 DT = 5e-05 Timestep time = 0.036645732 seconds. TIME= 0.00015 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 4] ADVANCE from elapsed time = 0.00015 to 0.0002 with dt = 5e-05 Making slow rhs at time 0.00015 for fast variables advancing from 0.00015 to 0.0001666666666667 Fast time integration at level 0 from 0.00015 to 0.0001666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00015 to 0.0001666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00015 Making slow rhs at time 0.0001666666666667 for fast variables advancing from 0.00015 to 0.000175 Fast time integration at level 0 from 0.00015 to 0.000175 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00015 to 0.000175 with dt = 2.5e-05 using RHS created at 0.0001666666666667 Making slow rhs at time 0.000175 for fast variables advancing from 0.00015 to 0.0002 Fast time integration at level 0 from 0.00015 to 0.000175 with dt = 2.5e-05 Fast time integration at level 0 from 0.000175 to 0.0002 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00015 to 0.0002 with dt = 5e-05 using RHS created at 0.000175 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 32768 cells Coarse STEP 4 ends. TIME = 0.0002 DT = 5e-05 Timestep time = 0.036293325 seconds. TIME= 0.0002 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 5] ADVANCE from elapsed time = 0.0002 to 0.00025 with dt = 5e-05 Making slow rhs at time 0.0002 for fast variables advancing from 0.0002 to 0.0002166666666667 Fast time integration at level 0 from 0.0002 to 0.0002166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0002 to 0.0002166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0002 Making slow rhs at time 0.0002166666666667 for fast variables advancing from 0.0002 to 0.000225 Fast time integration at level 0 from 0.0002 to 0.000225 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0002 to 0.000225 with dt = 2.5e-05 using RHS created at 0.0002166666666667 Making slow rhs at time 0.000225 for fast variables advancing from 0.0002 to 0.00025 Fast time integration at level 0 from 0.0002 to 0.000225 with dt = 2.5e-05 Fast time integration at level 0 from 0.000225 to 0.00025 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0002 to 0.00025 with dt = 5e-05 using RHS created at 0.000225 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 32768 cells Coarse STEP 5 ends. TIME = 0.00025 DT = 5e-05 Timestep time = 0.036125236 seconds. TIME= 0.00025 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 6] ADVANCE from elapsed time = 0.00025 to 0.0003 with dt = 5e-05 Making slow rhs at time 0.00025 for fast variables advancing from 0.00025 to 0.0002666666666667 Fast time integration at level 0 from 0.00025 to 0.0002666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00025 to 0.0002666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00025 Making slow rhs at time 0.0002666666666667 for fast variables advancing from 0.00025 to 0.000275 Fast time integration at level 0 from 0.00025 to 0.000275 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00025 to 0.000275 with dt = 2.5e-05 using RHS created at 0.0002666666666667 Making slow rhs at time 0.000275 for fast variables advancing from 0.00025 to 0.0003 Fast time integration at level 0 from 0.00025 to 0.000275 with dt = 2.5e-05 Fast time integration at level 0 from 0.000275 to 0.0003 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00025 to 0.0003 with dt = 5e-05 using RHS created at 0.000275 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 32768 cells Coarse STEP 6 ends. TIME = 0.0003 DT = 5e-05 Timestep time = 0.036740146 seconds. TIME= 0.0003 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 7] ADVANCE from elapsed time = 0.0003 to 0.00035 with dt = 5e-05 Making slow rhs at time 0.0003 for fast variables advancing from 0.0003 to 0.0003166666666667 Fast time integration at level 0 from 0.0003 to 0.0003166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0003 to 0.0003166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0003 Making slow rhs at time 0.0003166666666667 for fast variables advancing from 0.0003 to 0.000325 Fast time integration at level 0 from 0.0003 to 0.000325 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0003 to 0.000325 with dt = 2.5e-05 using RHS created at 0.0003166666666667 Making slow rhs at time 0.000325 for fast variables advancing from 0.0003 to 0.00035 Fast time integration at level 0 from 0.0003 to 0.000325 with dt = 2.5e-05 Fast time integration at level 0 from 0.000325 to 0.00035 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0003 to 0.00035 with dt = 5e-05 using RHS created at 0.000325 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 32768 cells Coarse STEP 7 ends. TIME = 0.00035 DT = 5e-05 Timestep time = 0.036112736 seconds. TIME= 0.00035 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 8] ADVANCE from elapsed time = 0.00035 to 0.0004 with dt = 5e-05 Making slow rhs at time 0.00035 for fast variables advancing from 0.00035 to 0.0003666666666667 Fast time integration at level 0 from 0.00035 to 0.0003666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00035 to 0.0003666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00035 Making slow rhs at time 0.0003666666666667 for fast variables advancing from 0.00035 to 0.000375 Fast time integration at level 0 from 0.00035 to 0.000375 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00035 to 0.000375 with dt = 2.5e-05 using RHS created at 0.0003666666666667 Making slow rhs at time 0.000375 for fast variables advancing from 0.00035 to 0.0004 Fast time integration at level 0 from 0.00035 to 0.000375 with dt = 2.5e-05 Fast time integration at level 0 from 0.000375 to 0.0004 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00035 to 0.0004 with dt = 5e-05 using RHS created at 0.000375 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 32768 cells Coarse STEP 8 ends. TIME = 0.0004 DT = 5e-05 Timestep time = 0.037065276 seconds. TIME= 0.0004 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 9] ADVANCE from elapsed time = 0.0004 to 0.00045 with dt = 5e-05 Making slow rhs at time 0.0004 for fast variables advancing from 0.0004 to 0.0004166666666667 Fast time integration at level 0 from 0.0004 to 0.0004166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0004 to 0.0004166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0004 Making slow rhs at time 0.0004166666666667 for fast variables advancing from 0.0004 to 0.000425 Fast time integration at level 0 from 0.0004 to 0.000425 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0004 to 0.000425 with dt = 2.5e-05 using RHS created at 0.0004166666666667 Making slow rhs at time 0.000425 for fast variables advancing from 0.0004 to 0.00045 Fast time integration at level 0 from 0.0004 to 0.000425 with dt = 2.5e-05 Fast time integration at level 0 from 0.000425 to 0.00045 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0004 to 0.00045 with dt = 5e-05 using RHS created at 0.000425 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 32768 cells Coarse STEP 9 ends. TIME = 0.00045 DT = 5e-05 Timestep time = 0.036549489 seconds. TIME= 0.00045 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 10] ADVANCE from elapsed time = 0.00045 to 0.0005 with dt = 5e-05 Making slow rhs at time 0.00045 for fast variables advancing from 0.00045 to 0.0004666666666667 Fast time integration at level 0 from 0.00045 to 0.0004666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00045 to 0.0004666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00045 Making slow rhs at time 0.0004666666666667 for fast variables advancing from 0.00045 to 0.000475 Fast time integration at level 0 from 0.00045 to 0.000475 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00045 to 0.000475 with dt = 2.5e-05 using RHS created at 0.0004666666666667 Making slow rhs at time 0.000475 for fast variables advancing from 0.00045 to 0.0005 Fast time integration at level 0 from 0.00045 to 0.000475 with dt = 2.5e-05 Fast time integration at level 0 from 0.000475 to 0.0005 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00045 to 0.0005 with dt = 5e-05 using RHS created at 0.000475 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 32768 cells Coarse STEP 10 ends. TIME = 0.0005 DT = 5e-05 Timestep time = 0.036540353 seconds. TIME= 0.0005 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 11] ADVANCE from elapsed time = 0.0005 to 0.00055 with dt = 5e-05 Making slow rhs at time 0.0005 for fast variables advancing from 0.0005 to 0.0005166666666667 Fast time integration at level 0 from 0.0005 to 0.0005166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0005 to 0.0005166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0005 Making slow rhs at time 0.0005166666666667 for fast variables advancing from 0.0005 to 0.000525 Fast time integration at level 0 from 0.0005 to 0.000525 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0005 to 0.000525 with dt = 2.5e-05 using RHS created at 0.0005166666666667 Making slow rhs at time 0.000525 for fast variables advancing from 0.0005 to 0.00055 Fast time integration at level 0 from 0.0005 to 0.000525 with dt = 2.5e-05 Fast time integration at level 0 from 0.000525 to 0.00055 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0005 to 0.00055 with dt = 5e-05 using RHS created at 0.000525 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 32768 cells Coarse STEP 11 ends. TIME = 0.00055 DT = 5e-05 Timestep time = 0.036333936 seconds. TIME= 0.00055 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 12] ADVANCE from elapsed time = 0.00055 to 0.0006 with dt = 5e-05 Making slow rhs at time 0.00055 for fast variables advancing from 0.00055 to 0.0005666666666667 Fast time integration at level 0 from 0.00055 to 0.0005666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00055 to 0.0005666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00055 Making slow rhs at time 0.0005666666666667 for fast variables advancing from 0.00055 to 0.000575 Fast time integration at level 0 from 0.00055 to 0.000575 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00055 to 0.000575 with dt = 2.5e-05 using RHS created at 0.0005666666666667 Making slow rhs at time 0.000575 for fast variables advancing from 0.00055 to 0.0006 Fast time integration at level 0 from 0.00055 to 0.000575 with dt = 2.5e-05 Fast time integration at level 0 from 0.000575 to 0.0006 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00055 to 0.0006 with dt = 5e-05 using RHS created at 0.000575 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 32768 cells Coarse STEP 12 ends. TIME = 0.0006 DT = 5e-05 Timestep time = 0.036813629 seconds. TIME= 0.0006 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 13] ADVANCE from elapsed time = 0.0006 to 0.00065 with dt = 5e-05 Making slow rhs at time 0.0006 for fast variables advancing from 0.0006 to 0.0006166666666667 Fast time integration at level 0 from 0.0006 to 0.0006166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0006 to 0.0006166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0006 Making slow rhs at time 0.0006166666666667 for fast variables advancing from 0.0006 to 0.000625 Fast time integration at level 0 from 0.0006 to 0.000625 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0006 to 0.000625 with dt = 2.5e-05 using RHS created at 0.0006166666666667 Making slow rhs at time 0.000625 for fast variables advancing from 0.0006 to 0.00065 Fast time integration at level 0 from 0.0006 to 0.000625 with dt = 2.5e-05 Fast time integration at level 0 from 0.000625 to 0.00065 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0006 to 0.00065 with dt = 5e-05 using RHS created at 0.000625 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 32768 cells Coarse STEP 13 ends. TIME = 0.00065 DT = 5e-05 Timestep time = 0.036463905 seconds. TIME= 0.00065 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 14] ADVANCE from elapsed time = 0.00065 to 0.0007 with dt = 5e-05 Making slow rhs at time 0.00065 for fast variables advancing from 0.00065 to 0.0006666666666667 Fast time integration at level 0 from 0.00065 to 0.0006666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00065 to 0.0006666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00065 Making slow rhs at time 0.0006666666666667 for fast variables advancing from 0.00065 to 0.000675 Fast time integration at level 0 from 0.00065 to 0.000675 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00065 to 0.000675 with dt = 2.5e-05 using RHS created at 0.0006666666666667 Making slow rhs at time 0.000675 for fast variables advancing from 0.00065 to 0.0007 Fast time integration at level 0 from 0.00065 to 0.000675 with dt = 2.5e-05 Fast time integration at level 0 from 0.000675 to 0.0007 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00065 to 0.0007 with dt = 5e-05 using RHS created at 0.000675 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 32768 cells Coarse STEP 14 ends. TIME = 0.0007 DT = 5e-05 Timestep time = 0.036297841 seconds. TIME= 0.0007 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 15] ADVANCE from elapsed time = 0.0007 to 0.00075 with dt = 5e-05 Making slow rhs at time 0.0007 for fast variables advancing from 0.0007 to 0.0007166666666667 Fast time integration at level 0 from 0.0007 to 0.0007166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0007 to 0.0007166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0007 Making slow rhs at time 0.0007166666666667 for fast variables advancing from 0.0007 to 0.000725 Fast time integration at level 0 from 0.0007 to 0.000725 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0007 to 0.000725 with dt = 2.5e-05 using RHS created at 0.0007166666666667 Making slow rhs at time 0.000725 for fast variables advancing from 0.0007 to 0.00075 Fast time integration at level 0 from 0.0007 to 0.000725 with dt = 2.5e-05 Fast time integration at level 0 from 0.000725 to 0.00075 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0007 to 0.00075 with dt = 5e-05 using RHS created at 0.000725 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 32768 cells Coarse STEP 15 ends. TIME = 0.00075 DT = 5e-05 Timestep time = 0.036917365 seconds. TIME= 0.00075 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 16] ADVANCE from elapsed time = 0.00075 to 0.0008 with dt = 5e-05 Making slow rhs at time 0.00075 for fast variables advancing from 0.00075 to 0.0007666666666667 Fast time integration at level 0 from 0.00075 to 0.0007666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00075 to 0.0007666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00075 Making slow rhs at time 0.0007666666666667 for fast variables advancing from 0.00075 to 0.000775 Fast time integration at level 0 from 0.00075 to 0.000775 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00075 to 0.000775 with dt = 2.5e-05 using RHS created at 0.0007666666666667 Making slow rhs at time 0.000775 for fast variables advancing from 0.00075 to 0.0008 Fast time integration at level 0 from 0.00075 to 0.000775 with dt = 2.5e-05 Fast time integration at level 0 from 0.000775 to 0.0008 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00075 to 0.0008 with dt = 5e-05 using RHS created at 0.000775 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 32768 cells Coarse STEP 16 ends. TIME = 0.0008 DT = 5e-05 Timestep time = 0.036832714 seconds. TIME= 0.0008 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 17] ADVANCE from elapsed time = 0.0008 to 0.00085 with dt = 5e-05 Making slow rhs at time 0.0008 for fast variables advancing from 0.0008 to 0.0008166666666667 Fast time integration at level 0 from 0.0008 to 0.0008166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0008 to 0.0008166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0008 Making slow rhs at time 0.0008166666666667 for fast variables advancing from 0.0008 to 0.000825 Fast time integration at level 0 from 0.0008 to 0.000825 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0008 to 0.000825 with dt = 2.5e-05 using RHS created at 0.0008166666666667 Making slow rhs at time 0.000825 for fast variables advancing from 0.0008 to 0.00085 Fast time integration at level 0 from 0.0008 to 0.000825 with dt = 2.5e-05 Fast time integration at level 0 from 0.000825 to 0.00085 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0008 to 0.00085 with dt = 5e-05 using RHS created at 0.000825 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 32768 cells Coarse STEP 17 ends. TIME = 0.00085 DT = 5e-05 Timestep time = 0.03631696 seconds. TIME= 0.00085 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 18] ADVANCE from elapsed time = 0.00085 to 0.0009 with dt = 5e-05 Making slow rhs at time 0.00085 for fast variables advancing from 0.00085 to 0.0008666666666667 Fast time integration at level 0 from 0.00085 to 0.0008666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00085 to 0.0008666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00085 Making slow rhs at time 0.0008666666666667 for fast variables advancing from 0.00085 to 0.000875 Fast time integration at level 0 from 0.00085 to 0.000875 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00085 to 0.000875 with dt = 2.5e-05 using RHS created at 0.0008666666666667 Making slow rhs at time 0.000875 for fast variables advancing from 0.00085 to 0.0009 Fast time integration at level 0 from 0.00085 to 0.000875 with dt = 2.5e-05 Fast time integration at level 0 from 0.000875 to 0.0009 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00085 to 0.0009 with dt = 5e-05 using RHS created at 0.000875 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 32768 cells Coarse STEP 18 ends. TIME = 0.0009 DT = 5e-05 Timestep time = 0.036431207 seconds. TIME= 0.0009 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 19] ADVANCE from elapsed time = 0.0009 to 0.00095 with dt = 5e-05 Making slow rhs at time 0.0009 for fast variables advancing from 0.0009 to 0.0009166666666667 Fast time integration at level 0 from 0.0009 to 0.0009166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0009 to 0.0009166666666667 with dt = 1.666666666667e-05 using RHS created at 0.0009 Making slow rhs at time 0.0009166666666667 for fast variables advancing from 0.0009 to 0.000925 Fast time integration at level 0 from 0.0009 to 0.000925 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0009 to 0.000925 with dt = 2.5e-05 using RHS created at 0.0009166666666667 Making slow rhs at time 0.000925 for fast variables advancing from 0.0009 to 0.00095 Fast time integration at level 0 from 0.0009 to 0.000925 with dt = 2.5e-05 Fast time integration at level 0 from 0.000925 to 0.00095 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0009 to 0.00095 with dt = 5e-05 using RHS created at 0.000925 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 32768 cells Coarse STEP 19 ends. TIME = 0.00095 DT = 5e-05 Timestep time = 0.036612778 seconds. TIME= 0.00095 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 20] ADVANCE from elapsed time = 0.00095 to 0.001 with dt = 5e-05 Making slow rhs at time 0.00095 for fast variables advancing from 0.00095 to 0.0009666666666667 Fast time integration at level 0 from 0.00095 to 0.0009666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00095 to 0.0009666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00095 Making slow rhs at time 0.0009666666666667 for fast variables advancing from 0.00095 to 0.000975 Fast time integration at level 0 from 0.00095 to 0.000975 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00095 to 0.000975 with dt = 2.5e-05 using RHS created at 0.0009666666666667 Making slow rhs at time 0.000975 for fast variables advancing from 0.00095 to 0.001 Fast time integration at level 0 from 0.00095 to 0.000975 with dt = 2.5e-05 Fast time integration at level 0 from 0.000975 to 0.001 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00095 to 0.001 with dt = 5e-05 using RHS created at 0.000975 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 32768 cells Coarse STEP 20 ends. TIME = 0.001 DT = 5e-05 Timestep time = 0.036069613 seconds. TIME= 0.001 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Writing native 3D plotfile ScalarAdvecDiffUniformU_plt00020 3DPlotfile write time = 0.00572354 seconds. Coarse STEP 21 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 21] ADVANCE from elapsed time = 0.001 to 0.00105 with dt = 5e-05 Making slow rhs at time 0.001 for fast variables advancing from 0.001 to 0.001016666666667 Fast time integration at level 0 from 0.001 to 0.001016666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.001 to 0.001016666666667 with dt = 1.666666666667e-05 using RHS created at 0.001 Making slow rhs at time 0.001016666666667 for fast variables advancing from 0.001 to 0.001025 Fast time integration at level 0 from 0.001 to 0.001025 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.001 to 0.001025 with dt = 2.5e-05 using RHS created at 0.001016666666667 Making slow rhs at time 0.001025 for fast variables advancing from 0.001 to 0.00105 Fast time integration at level 0 from 0.001 to 0.001025 with dt = 2.5e-05 Fast time integration at level 0 from 0.001025 to 0.00105 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.001 to 0.00105 with dt = 5e-05 using RHS created at 0.001025 Done with advance_dycore at level 0 [Level 0 step 21] Advanced 32768 cells Coarse STEP 21 ends. TIME = 0.00105 DT = 5e-05 Timestep time = 0.036236626 seconds. TIME= 0.00105 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 22 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 22] ADVANCE from elapsed time = 0.00105 to 0.0011 with dt = 5e-05 Making slow rhs at time 0.00105 for fast variables advancing from 0.00105 to 0.001066666666667 Fast time integration at level 0 from 0.00105 to 0.001066666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00105 to 0.001066666666667 with dt = 1.666666666667e-05 using RHS created at 0.00105 Making slow rhs at time 0.001066666666667 for fast variables advancing from 0.00105 to 0.001075 Fast time integration at level 0 from 0.00105 to 0.001075 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00105 to 0.001075 with dt = 2.5e-05 using RHS created at 0.001066666666667 Making slow rhs at time 0.001075 for fast variables advancing from 0.00105 to 0.0011 Fast time integration at level 0 from 0.00105 to 0.001075 with dt = 2.5e-05 Fast time integration at level 0 from 0.001075 to 0.0011 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00105 to 0.0011 with dt = 5e-05 using RHS created at 0.001075 Done with advance_dycore at level 0 [Level 0 step 22] Advanced 32768 cells Coarse STEP 22 ends. TIME = 0.0011 DT = 5e-05 Timestep time = 0.036338026 seconds. TIME= 0.0011 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 23 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 23] ADVANCE from elapsed time = 0.0011 to 0.00115 with dt = 5e-05 Making slow rhs at time 0.0011 for fast variables advancing from 0.0011 to 0.001116666666667 Fast time integration at level 0 from 0.0011 to 0.001116666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0011 to 0.001116666666667 with dt = 1.666666666667e-05 using RHS created at 0.0011 Making slow rhs at time 0.001116666666667 for fast variables advancing from 0.0011 to 0.001125 Fast time integration at level 0 from 0.0011 to 0.001125 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0011 to 0.001125 with dt = 2.5e-05 using RHS created at 0.001116666666667 Making slow rhs at time 0.001125 for fast variables advancing from 0.0011 to 0.00115 Fast time integration at level 0 from 0.0011 to 0.001125 with dt = 2.5e-05 Fast time integration at level 0 from 0.001125 to 0.00115 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0011 to 0.00115 with dt = 5e-05 using RHS created at 0.001125 Done with advance_dycore at level 0 [Level 0 step 23] Advanced 32768 cells Coarse STEP 23 ends. TIME = 0.00115 DT = 5e-05 Timestep time = 0.036118329 seconds. TIME= 0.00115 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 24 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 24] ADVANCE from elapsed time = 0.00115 to 0.0012 with dt = 5e-05 Making slow rhs at time 0.00115 for fast variables advancing from 0.00115 to 0.001166666666667 Fast time integration at level 0 from 0.00115 to 0.001166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00115 to 0.001166666666667 with dt = 1.666666666667e-05 using RHS created at 0.00115 Making slow rhs at time 0.001166666666667 for fast variables advancing from 0.00115 to 0.001175 Fast time integration at level 0 from 0.00115 to 0.001175 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00115 to 0.001175 with dt = 2.5e-05 using RHS created at 0.001166666666667 Making slow rhs at time 0.001175 for fast variables advancing from 0.00115 to 0.0012 Fast time integration at level 0 from 0.00115 to 0.001175 with dt = 2.5e-05 Fast time integration at level 0 from 0.001175 to 0.0012 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00115 to 0.0012 with dt = 5e-05 using RHS created at 0.001175 Done with advance_dycore at level 0 [Level 0 step 24] Advanced 32768 cells Coarse STEP 24 ends. TIME = 0.0012 DT = 5e-05 Timestep time = 0.036679407 seconds. TIME= 0.0012 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 25 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 25] ADVANCE from elapsed time = 0.0012 to 0.00125 with dt = 5e-05 Making slow rhs at time 0.0012 for fast variables advancing from 0.0012 to 0.001216666666667 Fast time integration at level 0 from 0.0012 to 0.001216666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0012 to 0.001216666666667 with dt = 1.666666666667e-05 using RHS created at 0.0012 Making slow rhs at time 0.001216666666667 for fast variables advancing from 0.0012 to 0.001225 Fast time integration at level 0 from 0.0012 to 0.001225 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0012 to 0.001225 with dt = 2.5e-05 using RHS created at 0.001216666666667 Making slow rhs at time 0.001225 for fast variables advancing from 0.0012 to 0.00125 Fast time integration at level 0 from 0.0012 to 0.001225 with dt = 2.5e-05 Fast time integration at level 0 from 0.001225 to 0.00125 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0012 to 0.00125 with dt = 5e-05 using RHS created at 0.001225 Done with advance_dycore at level 0 [Level 0 step 25] Advanced 32768 cells Coarse STEP 25 ends. TIME = 0.00125 DT = 5e-05 Timestep time = 0.036556595 seconds. TIME= 0.00125 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 26 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 26] ADVANCE from elapsed time = 0.00125 to 0.0013 with dt = 5e-05 Making slow rhs at time 0.00125 for fast variables advancing from 0.00125 to 0.001266666666667 Fast time integration at level 0 from 0.00125 to 0.001266666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00125 to 0.001266666666667 with dt = 1.666666666667e-05 using RHS created at 0.00125 Making slow rhs at time 0.001266666666667 for fast variables advancing from 0.00125 to 0.001275 Fast time integration at level 0 from 0.00125 to 0.001275 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00125 to 0.001275 with dt = 2.5e-05 using RHS created at 0.001266666666667 Making slow rhs at time 0.001275 for fast variables advancing from 0.00125 to 0.0013 Fast time integration at level 0 from 0.00125 to 0.001275 with dt = 2.5e-05 Fast time integration at level 0 from 0.001275 to 0.0013 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00125 to 0.0013 with dt = 5e-05 using RHS created at 0.001275 Done with advance_dycore at level 0 [Level 0 step 26] Advanced 32768 cells Coarse STEP 26 ends. TIME = 0.0013 DT = 5e-05 Timestep time = 0.036513093 seconds. TIME= 0.0013 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 27 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 27] ADVANCE from elapsed time = 0.0013 to 0.00135 with dt = 5e-05 Making slow rhs at time 0.0013 for fast variables advancing from 0.0013 to 0.001316666666667 Fast time integration at level 0 from 0.0013 to 0.001316666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0013 to 0.001316666666667 with dt = 1.666666666667e-05 using RHS created at 0.0013 Making slow rhs at time 0.001316666666667 for fast variables advancing from 0.0013 to 0.001325 Fast time integration at level 0 from 0.0013 to 0.001325 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0013 to 0.001325 with dt = 2.5e-05 using RHS created at 0.001316666666667 Making slow rhs at time 0.001325 for fast variables advancing from 0.0013 to 0.00135 Fast time integration at level 0 from 0.0013 to 0.001325 with dt = 2.5e-05 Fast time integration at level 0 from 0.001325 to 0.00135 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0013 to 0.00135 with dt = 5e-05 using RHS created at 0.001325 Done with advance_dycore at level 0 [Level 0 step 27] Advanced 32768 cells Coarse STEP 27 ends. TIME = 0.00135 DT = 5e-05 Timestep time = 0.036567754 seconds. TIME= 0.00135 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 28 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 28] ADVANCE from elapsed time = 0.00135 to 0.0014 with dt = 5e-05 Making slow rhs at time 0.00135 for fast variables advancing from 0.00135 to 0.001366666666667 Fast time integration at level 0 from 0.00135 to 0.001366666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00135 to 0.001366666666667 with dt = 1.666666666667e-05 using RHS created at 0.00135 Making slow rhs at time 0.001366666666667 for fast variables advancing from 0.00135 to 0.001375 Fast time integration at level 0 from 0.00135 to 0.001375 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00135 to 0.001375 with dt = 2.5e-05 using RHS created at 0.001366666666667 Making slow rhs at time 0.001375 for fast variables advancing from 0.00135 to 0.0014 Fast time integration at level 0 from 0.00135 to 0.001375 with dt = 2.5e-05 Fast time integration at level 0 from 0.001375 to 0.0014 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00135 to 0.0014 with dt = 5e-05 using RHS created at 0.001375 Done with advance_dycore at level 0 [Level 0 step 28] Advanced 32768 cells Coarse STEP 28 ends. TIME = 0.0014 DT = 5e-05 Timestep time = 0.036738812 seconds. TIME= 0.0014 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 29 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 29] ADVANCE from elapsed time = 0.0014 to 0.00145 with dt = 5e-05 Making slow rhs at time 0.0014 for fast variables advancing from 0.0014 to 0.001416666666667 Fast time integration at level 0 from 0.0014 to 0.001416666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0014 to 0.001416666666667 with dt = 1.666666666667e-05 using RHS created at 0.0014 Making slow rhs at time 0.001416666666667 for fast variables advancing from 0.0014 to 0.001425 Fast time integration at level 0 from 0.0014 to 0.001425 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0014 to 0.001425 with dt = 2.5e-05 using RHS created at 0.001416666666667 Making slow rhs at time 0.001425 for fast variables advancing from 0.0014 to 0.00145 Fast time integration at level 0 from 0.0014 to 0.001425 with dt = 2.5e-05 Fast time integration at level 0 from 0.001425 to 0.00145 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0014 to 0.00145 with dt = 5e-05 using RHS created at 0.001425 Done with advance_dycore at level 0 [Level 0 step 29] Advanced 32768 cells Coarse STEP 29 ends. TIME = 0.00145 DT = 5e-05 Timestep time = 0.036345359 seconds. TIME= 0.00145 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 30 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 30] ADVANCE from elapsed time = 0.00145 to 0.0015 with dt = 5e-05 Making slow rhs at time 0.00145 for fast variables advancing from 0.00145 to 0.001466666666667 Fast time integration at level 0 from 0.00145 to 0.001466666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00145 to 0.001466666666667 with dt = 1.666666666667e-05 using RHS created at 0.00145 Making slow rhs at time 0.001466666666667 for fast variables advancing from 0.00145 to 0.001475 Fast time integration at level 0 from 0.00145 to 0.001475 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00145 to 0.001475 with dt = 2.5e-05 using RHS created at 0.001466666666667 Making slow rhs at time 0.001475 for fast variables advancing from 0.00145 to 0.0015 Fast time integration at level 0 from 0.00145 to 0.001475 with dt = 2.5e-05 Fast time integration at level 0 from 0.001475 to 0.0015 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00145 to 0.0015 with dt = 5e-05 using RHS created at 0.001475 Done with advance_dycore at level 0 [Level 0 step 30] Advanced 32768 cells Coarse STEP 30 ends. TIME = 0.0015 DT = 5e-05 Timestep time = 0.036340213 seconds. TIME= 0.0015 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 31 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 31] ADVANCE from elapsed time = 0.0015 to 0.00155 with dt = 5e-05 Making slow rhs at time 0.0015 for fast variables advancing from 0.0015 to 0.001516666666667 Fast time integration at level 0 from 0.0015 to 0.001516666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0015 to 0.001516666666667 with dt = 1.666666666667e-05 using RHS created at 0.0015 Making slow rhs at time 0.001516666666667 for fast variables advancing from 0.0015 to 0.001525 Fast time integration at level 0 from 0.0015 to 0.001525 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0015 to 0.001525 with dt = 2.5e-05 using RHS created at 0.001516666666667 Making slow rhs at time 0.001525 for fast variables advancing from 0.0015 to 0.00155 Fast time integration at level 0 from 0.0015 to 0.001525 with dt = 2.5e-05 Fast time integration at level 0 from 0.001525 to 0.00155 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0015 to 0.00155 with dt = 5e-05 using RHS created at 0.001525 Done with advance_dycore at level 0 [Level 0 step 31] Advanced 32768 cells Coarse STEP 31 ends. TIME = 0.00155 DT = 5e-05 Timestep time = 0.036611338 seconds. TIME= 0.00155 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 32 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 32] ADVANCE from elapsed time = 0.00155 to 0.0016 with dt = 5e-05 Making slow rhs at time 0.00155 for fast variables advancing from 0.00155 to 0.001566666666667 Fast time integration at level 0 from 0.00155 to 0.001566666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00155 to 0.001566666666667 with dt = 1.666666666667e-05 using RHS created at 0.00155 Making slow rhs at time 0.001566666666667 for fast variables advancing from 0.00155 to 0.001575 Fast time integration at level 0 from 0.00155 to 0.001575 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00155 to 0.001575 with dt = 2.5e-05 using RHS created at 0.001566666666667 Making slow rhs at time 0.001575 for fast variables advancing from 0.00155 to 0.0016 Fast time integration at level 0 from 0.00155 to 0.001575 with dt = 2.5e-05 Fast time integration at level 0 from 0.001575 to 0.0016 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00155 to 0.0016 with dt = 5e-05 using RHS created at 0.001575 Done with advance_dycore at level 0 [Level 0 step 32] Advanced 32768 cells Coarse STEP 32 ends. TIME = 0.0016 DT = 5e-05 Timestep time = 0.036207005 seconds. TIME= 0.0016 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 33 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 33] ADVANCE from elapsed time = 0.0016 to 0.00165 with dt = 5e-05 Making slow rhs at time 0.0016 for fast variables advancing from 0.0016 to 0.001616666666667 Fast time integration at level 0 from 0.0016 to 0.001616666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0016 to 0.001616666666667 with dt = 1.666666666667e-05 using RHS created at 0.0016 Making slow rhs at time 0.001616666666667 for fast variables advancing from 0.0016 to 0.001625 Fast time integration at level 0 from 0.0016 to 0.001625 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0016 to 0.001625 with dt = 2.5e-05 using RHS created at 0.001616666666667 Making slow rhs at time 0.001625 for fast variables advancing from 0.0016 to 0.00165 Fast time integration at level 0 from 0.0016 to 0.001625 with dt = 2.5e-05 Fast time integration at level 0 from 0.001625 to 0.00165 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0016 to 0.00165 with dt = 5e-05 using RHS created at 0.001625 Done with advance_dycore at level 0 [Level 0 step 33] Advanced 32768 cells Coarse STEP 33 ends. TIME = 0.00165 DT = 5e-05 Timestep time = 0.036867695 seconds. TIME= 0.00165 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 34 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 34] ADVANCE from elapsed time = 0.00165 to 0.0017 with dt = 5e-05 Making slow rhs at time 0.00165 for fast variables advancing from 0.00165 to 0.001666666666667 Fast time integration at level 0 from 0.00165 to 0.001666666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00165 to 0.001666666666667 with dt = 1.666666666667e-05 using RHS created at 0.00165 Making slow rhs at time 0.001666666666667 for fast variables advancing from 0.00165 to 0.001675 Fast time integration at level 0 from 0.00165 to 0.001675 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00165 to 0.001675 with dt = 2.5e-05 using RHS created at 0.001666666666667 Making slow rhs at time 0.001675 for fast variables advancing from 0.00165 to 0.0017 Fast time integration at level 0 from 0.00165 to 0.001675 with dt = 2.5e-05 Fast time integration at level 0 from 0.001675 to 0.0017 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00165 to 0.0017 with dt = 5e-05 using RHS created at 0.001675 Done with advance_dycore at level 0 [Level 0 step 34] Advanced 32768 cells Coarse STEP 34 ends. TIME = 0.0017 DT = 5e-05 Timestep time = 0.036279199 seconds. TIME= 0.0017 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 35 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 35] ADVANCE from elapsed time = 0.0017 to 0.00175 with dt = 5e-05 Making slow rhs at time 0.0017 for fast variables advancing from 0.0017 to 0.001716666666667 Fast time integration at level 0 from 0.0017 to 0.001716666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0017 to 0.001716666666667 with dt = 1.666666666667e-05 using RHS created at 0.0017 Making slow rhs at time 0.001716666666667 for fast variables advancing from 0.0017 to 0.001725 Fast time integration at level 0 from 0.0017 to 0.001725 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0017 to 0.001725 with dt = 2.5e-05 using RHS created at 0.001716666666667 Making slow rhs at time 0.001725 for fast variables advancing from 0.0017 to 0.00175 Fast time integration at level 0 from 0.0017 to 0.001725 with dt = 2.5e-05 Fast time integration at level 0 from 0.001725 to 0.00175 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0017 to 0.00175 with dt = 5e-05 using RHS created at 0.001725 Done with advance_dycore at level 0 [Level 0 step 35] Advanced 32768 cells Coarse STEP 35 ends. TIME = 0.00175 DT = 5e-05 Timestep time = 0.036316695 seconds. TIME= 0.00175 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 36 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 36] ADVANCE from elapsed time = 0.00175 to 0.0018 with dt = 5e-05 Making slow rhs at time 0.00175 for fast variables advancing from 0.00175 to 0.001766666666667 Fast time integration at level 0 from 0.00175 to 0.001766666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00175 to 0.001766666666667 with dt = 1.666666666667e-05 using RHS created at 0.00175 Making slow rhs at time 0.001766666666667 for fast variables advancing from 0.00175 to 0.001775 Fast time integration at level 0 from 0.00175 to 0.001775 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00175 to 0.001775 with dt = 2.5e-05 using RHS created at 0.001766666666667 Making slow rhs at time 0.001775 for fast variables advancing from 0.00175 to 0.0018 Fast time integration at level 0 from 0.00175 to 0.001775 with dt = 2.5e-05 Fast time integration at level 0 from 0.001775 to 0.0018 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00175 to 0.0018 with dt = 5e-05 using RHS created at 0.001775 Done with advance_dycore at level 0 [Level 0 step 36] Advanced 32768 cells Coarse STEP 36 ends. TIME = 0.0018 DT = 5e-05 Timestep time = 0.036222072 seconds. TIME= 0.0018 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 37 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 37] ADVANCE from elapsed time = 0.0018 to 0.00185 with dt = 5e-05 Making slow rhs at time 0.0018 for fast variables advancing from 0.0018 to 0.001816666666667 Fast time integration at level 0 from 0.0018 to 0.001816666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0018 to 0.001816666666667 with dt = 1.666666666667e-05 using RHS created at 0.0018 Making slow rhs at time 0.001816666666667 for fast variables advancing from 0.0018 to 0.001825 Fast time integration at level 0 from 0.0018 to 0.001825 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0018 to 0.001825 with dt = 2.5e-05 using RHS created at 0.001816666666667 Making slow rhs at time 0.001825 for fast variables advancing from 0.0018 to 0.00185 Fast time integration at level 0 from 0.0018 to 0.001825 with dt = 2.5e-05 Fast time integration at level 0 from 0.001825 to 0.00185 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0018 to 0.00185 with dt = 5e-05 using RHS created at 0.001825 Done with advance_dycore at level 0 [Level 0 step 37] Advanced 32768 cells Coarse STEP 37 ends. TIME = 0.00185 DT = 5e-05 Timestep time = 0.036521848 seconds. TIME= 0.00185 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 38 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 38] ADVANCE from elapsed time = 0.00185 to 0.0019 with dt = 5e-05 Making slow rhs at time 0.00185 for fast variables advancing from 0.00185 to 0.001866666666667 Fast time integration at level 0 from 0.00185 to 0.001866666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00185 to 0.001866666666667 with dt = 1.666666666667e-05 using RHS created at 0.00185 Making slow rhs at time 0.001866666666667 for fast variables advancing from 0.00185 to 0.001875 Fast time integration at level 0 from 0.00185 to 0.001875 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00185 to 0.001875 with dt = 2.5e-05 using RHS created at 0.001866666666667 Making slow rhs at time 0.001875 for fast variables advancing from 0.00185 to 0.0019 Fast time integration at level 0 from 0.00185 to 0.001875 with dt = 2.5e-05 Fast time integration at level 0 from 0.001875 to 0.0019 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00185 to 0.0019 with dt = 5e-05 using RHS created at 0.001875 Done with advance_dycore at level 0 [Level 0 step 38] Advanced 32768 cells Coarse STEP 38 ends. TIME = 0.0019 DT = 5e-05 Timestep time = 0.03631853 seconds. TIME= 0.0019 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 39 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 39] ADVANCE from elapsed time = 0.0019 to 0.00195 with dt = 5e-05 Making slow rhs at time 0.0019 for fast variables advancing from 0.0019 to 0.001916666666667 Fast time integration at level 0 from 0.0019 to 0.001916666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0019 to 0.001916666666667 with dt = 1.666666666667e-05 using RHS created at 0.0019 Making slow rhs at time 0.001916666666667 for fast variables advancing from 0.0019 to 0.001925 Fast time integration at level 0 from 0.0019 to 0.001925 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0019 to 0.001925 with dt = 2.5e-05 using RHS created at 0.001916666666667 Making slow rhs at time 0.001925 for fast variables advancing from 0.0019 to 0.00195 Fast time integration at level 0 from 0.0019 to 0.001925 with dt = 2.5e-05 Fast time integration at level 0 from 0.001925 to 0.00195 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0019 to 0.00195 with dt = 5e-05 using RHS created at 0.001925 Done with advance_dycore at level 0 [Level 0 step 39] Advanced 32768 cells Coarse STEP 39 ends. TIME = 0.00195 DT = 5e-05 Timestep time = 0.036869382 seconds. TIME= 0.00195 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 40 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 40] ADVANCE from elapsed time = 0.00195 to 0.002 with dt = 5e-05 Making slow rhs at time 0.00195 for fast variables advancing from 0.00195 to 0.001966666666667 Fast time integration at level 0 from 0.00195 to 0.001966666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00195 to 0.001966666666667 with dt = 1.666666666667e-05 using RHS created at 0.00195 Making slow rhs at time 0.001966666666667 for fast variables advancing from 0.00195 to 0.001975 Fast time integration at level 0 from 0.00195 to 0.001975 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00195 to 0.001975 with dt = 2.5e-05 using RHS created at 0.001966666666667 Making slow rhs at time 0.001975 for fast variables advancing from 0.00195 to 0.002 Fast time integration at level 0 from 0.00195 to 0.001975 with dt = 2.5e-05 Fast time integration at level 0 from 0.001975 to 0.002 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00195 to 0.002 with dt = 5e-05 using RHS created at 0.001975 Done with advance_dycore at level 0 [Level 0 step 40] Advanced 32768 cells Coarse STEP 40 ends. TIME = 0.002 DT = 5e-05 Timestep time = 0.03642448 seconds. TIME= 0.002 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Writing native 3D plotfile ScalarAdvecDiffUniformU_plt00040 3DPlotfile write time = 0.007014695 seconds. Coarse STEP 41 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 41] ADVANCE from elapsed time = 0.002 to 0.00205 with dt = 5e-05 Making slow rhs at time 0.002 for fast variables advancing from 0.002 to 0.002016666666667 Fast time integration at level 0 from 0.002 to 0.002016666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.002 to 0.002016666666667 with dt = 1.666666666667e-05 using RHS created at 0.002 Making slow rhs at time 0.002016666666667 for fast variables advancing from 0.002 to 0.002025 Fast time integration at level 0 from 0.002 to 0.002025 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.002 to 0.002025 with dt = 2.5e-05 using RHS created at 0.002016666666667 Making slow rhs at time 0.002025 for fast variables advancing from 0.002 to 0.00205 Fast time integration at level 0 from 0.002 to 0.002025 with dt = 2.5e-05 Fast time integration at level 0 from 0.002025 to 0.00205 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.002 to 0.00205 with dt = 5e-05 using RHS created at 0.002025 Done with advance_dycore at level 0 [Level 0 step 41] Advanced 32768 cells Coarse STEP 41 ends. TIME = 0.00205 DT = 5e-05 Timestep time = 0.040938111 seconds. TIME= 0.00205 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 42 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 42] ADVANCE from elapsed time = 0.00205 to 0.0021 with dt = 5e-05 Making slow rhs at time 0.00205 for fast variables advancing from 0.00205 to 0.002066666666667 Fast time integration at level 0 from 0.00205 to 0.002066666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00205 to 0.002066666666667 with dt = 1.666666666667e-05 using RHS created at 0.00205 Making slow rhs at time 0.002066666666667 for fast variables advancing from 0.00205 to 0.002075 Fast time integration at level 0 from 0.00205 to 0.002075 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00205 to 0.002075 with dt = 2.5e-05 using RHS created at 0.002066666666667 Making slow rhs at time 0.002075 for fast variables advancing from 0.00205 to 0.0021 Fast time integration at level 0 from 0.00205 to 0.002075 with dt = 2.5e-05 Fast time integration at level 0 from 0.002075 to 0.0021 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00205 to 0.0021 with dt = 5e-05 using RHS created at 0.002075 Done with advance_dycore at level 0 [Level 0 step 42] Advanced 32768 cells Coarse STEP 42 ends. TIME = 0.0021 DT = 5e-05 Timestep time = 0.035511608 seconds. TIME= 0.0021 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 43 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 43] ADVANCE from elapsed time = 0.0021 to 0.00215 with dt = 5e-05 Making slow rhs at time 0.0021 for fast variables advancing from 0.0021 to 0.002116666666667 Fast time integration at level 0 from 0.0021 to 0.002116666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0021 to 0.002116666666667 with dt = 1.666666666667e-05 using RHS created at 0.0021 Making slow rhs at time 0.002116666666667 for fast variables advancing from 0.0021 to 0.002125 Fast time integration at level 0 from 0.0021 to 0.002125 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0021 to 0.002125 with dt = 2.5e-05 using RHS created at 0.002116666666667 Making slow rhs at time 0.002125 for fast variables advancing from 0.0021 to 0.00215 Fast time integration at level 0 from 0.0021 to 0.002125 with dt = 2.5e-05 Fast time integration at level 0 from 0.002125 to 0.00215 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0021 to 0.00215 with dt = 5e-05 using RHS created at 0.002125 Done with advance_dycore at level 0 [Level 0 step 43] Advanced 32768 cells Coarse STEP 43 ends. TIME = 0.00215 DT = 5e-05 Timestep time = 0.036342629 seconds. TIME= 0.00215 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 44 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 44] ADVANCE from elapsed time = 0.00215 to 0.0022 with dt = 5e-05 Making slow rhs at time 0.00215 for fast variables advancing from 0.00215 to 0.002166666666667 Fast time integration at level 0 from 0.00215 to 0.002166666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00215 to 0.002166666666667 with dt = 1.666666666667e-05 using RHS created at 0.00215 Making slow rhs at time 0.002166666666667 for fast variables advancing from 0.00215 to 0.002175 Fast time integration at level 0 from 0.00215 to 0.002175 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00215 to 0.002175 with dt = 2.5e-05 using RHS created at 0.002166666666667 Making slow rhs at time 0.002175 for fast variables advancing from 0.00215 to 0.0022 Fast time integration at level 0 from 0.00215 to 0.002175 with dt = 2.5e-05 Fast time integration at level 0 from 0.002175 to 0.0022 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00215 to 0.0022 with dt = 5e-05 using RHS created at 0.002175 Done with advance_dycore at level 0 [Level 0 step 44] Advanced 32768 cells Coarse STEP 44 ends. TIME = 0.0022 DT = 5e-05 Timestep time = 0.036187586 seconds. TIME= 0.0022 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 45 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 45] ADVANCE from elapsed time = 0.0022 to 0.00225 with dt = 5e-05 Making slow rhs at time 0.0022 for fast variables advancing from 0.0022 to 0.002216666666667 Fast time integration at level 0 from 0.0022 to 0.002216666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0022 to 0.002216666666667 with dt = 1.666666666667e-05 using RHS created at 0.0022 Making slow rhs at time 0.002216666666667 for fast variables advancing from 0.0022 to 0.002225 Fast time integration at level 0 from 0.0022 to 0.002225 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0022 to 0.002225 with dt = 2.5e-05 using RHS created at 0.002216666666667 Making slow rhs at time 0.002225 for fast variables advancing from 0.0022 to 0.00225 Fast time integration at level 0 from 0.0022 to 0.002225 with dt = 2.5e-05 Fast time integration at level 0 from 0.002225 to 0.00225 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0022 to 0.00225 with dt = 5e-05 using RHS created at 0.002225 Done with advance_dycore at level 0 [Level 0 step 45] Advanced 32768 cells Coarse STEP 45 ends. TIME = 0.00225 DT = 5e-05 Timestep time = 0.036280961 seconds. TIME= 0.00225 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 46 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 46] ADVANCE from elapsed time = 0.00225 to 0.0023 with dt = 5e-05 Making slow rhs at time 0.00225 for fast variables advancing from 0.00225 to 0.002266666666667 Fast time integration at level 0 from 0.00225 to 0.002266666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00225 to 0.002266666666667 with dt = 1.666666666667e-05 using RHS created at 0.00225 Making slow rhs at time 0.002266666666667 for fast variables advancing from 0.00225 to 0.002275 Fast time integration at level 0 from 0.00225 to 0.002275 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00225 to 0.002275 with dt = 2.5e-05 using RHS created at 0.002266666666667 Making slow rhs at time 0.002275 for fast variables advancing from 0.00225 to 0.0023 Fast time integration at level 0 from 0.00225 to 0.002275 with dt = 2.5e-05 Fast time integration at level 0 from 0.002275 to 0.0023 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00225 to 0.0023 with dt = 5e-05 using RHS created at 0.002275 Done with advance_dycore at level 0 [Level 0 step 46] Advanced 32768 cells Coarse STEP 46 ends. TIME = 0.0023 DT = 5e-05 Timestep time = 0.036716665 seconds. TIME= 0.0023 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 47 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 47] ADVANCE from elapsed time = 0.0023 to 0.00235 with dt = 5e-05 Making slow rhs at time 0.0023 for fast variables advancing from 0.0023 to 0.002316666666667 Fast time integration at level 0 from 0.0023 to 0.002316666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0023 to 0.002316666666667 with dt = 1.666666666667e-05 using RHS created at 0.0023 Making slow rhs at time 0.002316666666667 for fast variables advancing from 0.0023 to 0.002325 Fast time integration at level 0 from 0.0023 to 0.002325 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0023 to 0.002325 with dt = 2.5e-05 using RHS created at 0.002316666666667 Making slow rhs at time 0.002325 for fast variables advancing from 0.0023 to 0.00235 Fast time integration at level 0 from 0.0023 to 0.002325 with dt = 2.5e-05 Fast time integration at level 0 from 0.002325 to 0.00235 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0023 to 0.00235 with dt = 5e-05 using RHS created at 0.002325 Done with advance_dycore at level 0 [Level 0 step 47] Advanced 32768 cells Coarse STEP 47 ends. TIME = 0.00235 DT = 5e-05 Timestep time = 0.036227873 seconds. TIME= 0.00235 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 48 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 48] ADVANCE from elapsed time = 0.00235 to 0.0024 with dt = 5e-05 Making slow rhs at time 0.00235 for fast variables advancing from 0.00235 to 0.002366666666667 Fast time integration at level 0 from 0.00235 to 0.002366666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00235 to 0.002366666666667 with dt = 1.666666666667e-05 using RHS created at 0.00235 Making slow rhs at time 0.002366666666667 for fast variables advancing from 0.00235 to 0.002375 Fast time integration at level 0 from 0.00235 to 0.002375 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00235 to 0.002375 with dt = 2.5e-05 using RHS created at 0.002366666666667 Making slow rhs at time 0.002375 for fast variables advancing from 0.00235 to 0.0024 Fast time integration at level 0 from 0.00235 to 0.002375 with dt = 2.5e-05 Fast time integration at level 0 from 0.002375 to 0.0024 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00235 to 0.0024 with dt = 5e-05 using RHS created at 0.002375 Done with advance_dycore at level 0 [Level 0 step 48] Advanced 32768 cells Coarse STEP 48 ends. TIME = 0.0024 DT = 5e-05 Timestep time = 0.036793518 seconds. TIME= 0.0024 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 49 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 49] ADVANCE from elapsed time = 0.0024 to 0.00245 with dt = 5e-05 Making slow rhs at time 0.0024 for fast variables advancing from 0.0024 to 0.002416666666667 Fast time integration at level 0 from 0.0024 to 0.002416666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.0024 to 0.002416666666667 with dt = 1.666666666667e-05 using RHS created at 0.0024 Making slow rhs at time 0.002416666666667 for fast variables advancing from 0.0024 to 0.002425 Fast time integration at level 0 from 0.0024 to 0.002425 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0024 to 0.002425 with dt = 2.5e-05 using RHS created at 0.002416666666667 Making slow rhs at time 0.002425 for fast variables advancing from 0.0024 to 0.00245 Fast time integration at level 0 from 0.0024 to 0.002425 with dt = 2.5e-05 Fast time integration at level 0 from 0.002425 to 0.00245 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.0024 to 0.00245 with dt = 5e-05 using RHS created at 0.002425 Done with advance_dycore at level 0 [Level 0 step 49] Advanced 32768 cells Coarse STEP 49 ends. TIME = 0.00245 DT = 5e-05 Timestep time = 0.03647358 seconds. TIME= 0.00245 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Coarse STEP 50 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.000294209006 Anelastic dt at level 0 would be: 0.0003125 Fixed dt at level 0 is: 5e-05 Fixed fast dt at level 0 is: 2.5e-05 smallest even ratio is: 2 [Level 0 step 50] ADVANCE from elapsed time = 0.00245 to 0.0025 with dt = 5e-05 Making slow rhs at time 0.00245 for fast variables advancing from 0.00245 to 0.002466666666667 Fast time integration at level 0 from 0.00245 to 0.002466666666667 with dt = 1.666666666667e-05 Time integration of scalars at level 0 from 0.00245 to 0.002466666666667 with dt = 1.666666666667e-05 using RHS created at 0.00245 Making slow rhs at time 0.002466666666667 for fast variables advancing from 0.00245 to 0.002475 Fast time integration at level 0 from 0.00245 to 0.002475 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00245 to 0.002475 with dt = 2.5e-05 using RHS created at 0.002466666666667 Making slow rhs at time 0.002475 for fast variables advancing from 0.00245 to 0.0025 Fast time integration at level 0 from 0.00245 to 0.002475 with dt = 2.5e-05 Fast time integration at level 0 from 0.002475 to 0.0025 with dt = 2.5e-05 Time integration of scalars at level 0 from 0.00245 to 0.0025 with dt = 5e-05 using RHS created at 0.002475 Done with advance_dycore at level 0 [Level 0 step 50] Advanced 32768 cells Coarse STEP 50 ends. TIME = 0.0025 DT = 5e-05 Timestep time = 0.036219204 seconds. TIME= 0.0025 MASS = 1 RHO THETA = 1 RHO SCALAR = 0.1630923462 Writing native 3D plotfile ScalarAdvecDiffUniformU_plt00050 3DPlotfile write time = 0.005289112 seconds. Writing native checkpoint ScalarAdvecDiffUniformU_chk00050 Checkpoint write time = 0.026308681 seconds. Total Time: 1.965464003 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] AMReX (26.07-34-g922e54823e49) finalized