Initializing AMReX (26.08-36-gf2cbba4afc9e)... MPI initialized with 4 MPI processes MPI initialized with thread support level 0 AMReX (26.08-36-gf2cbba4afc9e) initialized Successfully read inputs file ... ERF git hash: 44360f701 AMReX git hash: 26.08-36-gf2cbba4afc Problem name (from inputs file) is: "BOMEX" Level 0 is land Coriolis frequency, f = 3.76e-05 1/s Thermal stratification based on gradient of potential temperature Maximum simulation length based on stop_time: 21600 s (elapsed) Adding stop time 21600 to start_time 0 Null land surface model! SOLVER CHOICE: At level 0 : compressible with implicit substepping vert_implicit_fac at level 0 : 1 1 0 (theta = 1, moisture = 1, tke = 1, momenta = 1) use_coriolis : 1 use_gravity : 1 Moisture Model: Kessler No Rain Terrain Type: None Buildings Type: None Mesh Type: ConstantDz ABL Driver Type: None Radiation Model: None Gradp_type : 0 Buoyancy_type at level 0 : 1 Advection Choices: dycore_horiz_adv_type : Upwind_3rd dycore_vert_adv_type : Upwind_3rd dryscal_horiz_adv_type : Upwind_3rd_SL dryscal_vert_adv_type : Upwind_3rd_SL moistscal_horiz_adv_type : Upwind_3rd_SL moistscal_vert_adv_type : Upwind_3rd_SL Diffusion choices: rho0_trans : 1 alpha_T : 0 alpha_C : 0 dynamic_viscosity : 0 Not using any molecular diffusivity, i.e. using the modeled turbulent diffusivity Sponge choices: Rayleigh damping : None w damping : 0 (coeff = -1 * dz/dt**2) Turbulence Settings at level 0 Using Smagorinsky LES model at level 0 Smagorinsky uses Richardson number correction with Ri_crit = 0.25 Cs : 0.17 isotropic mixing : 1 Pr_t : 0.3333333333 Sc_t : 0.3333333333 WRF lateral boundary density forcing: disabled WRF lateral boundary cloud-water/cloud-ice forcing: disabled Restart from native checkpoint chk00000_for_restart BA FROM SCRATCH AT LEVEL 0 (BoxArray maxbox(4) m_ref->m_hash_sig(0) ((0,0,0) (31,31,99) (0,0,0)) ((32,0,0) (63,31,99) (0,0,0)) ((0,32,0) (31,63,99) (0,0,0)) ((32,32,0) (63,63,99) (0,0,0)) ) Reading LMASK data Restart time = 0.758161027 seconds. Using specified ustar, tstar, qstar for MOST = 0.28 0.008 5.2e-05 If there is water, Charnock relation with C_a=0.0185 will be used Reading MOST variables Max value of |p_hse - p_eos| is 8.731149137e-11, less than the tolerance 1.012711967e-08 Min/max value of dp0/dx are zero Min/max value of dp0/dy are zero Min/max value of dp0/dz + rho0*|g| are less than 1e-08 Min/Max value of x-gradient of full (moist) pressure are -0.1089242758 0.1087052889 with min at face (12,13,0) with max at face (47,16,2) Min/Max value of y-gradient of full (moist) pressure are -0.1090231336 0.1097352894 with min at face (35,58,1) with max at face (38,63,2) Min/max value of moist dp/dz + rho_m*|g| are -0.2747946576 0.2712073632 with min at face (31,51,1) with max at face (28,27,6) Min/max value of -dp'/dz + buoyancy are -0.2712073632 0.2747946576 with min at face (28,27,6) with max at face (31,51,1) Writing native 3D plotfile Bomex_plt00000 3DPlotfile write time = 0.046680404 seconds. TIME= 0 MASS = 1.582864788e+11 RHO THETA = 4.842939613e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723012 Coarse STEP 1 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074677625 (terrain aware) 0.8074677625 (terrain unaware) Anelastic dt at level 0 would be: 11.4155825 (terrain aware) 11.4155825 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 1] ADVANCE from elapsed time = 0 to 0.3 with dt = 0.3 Making slow rhs at time 0 for fast variables advancing from 0 to 0.1 Fast time integration at level 0 from 0 to 0.1 with dt = 0.1 Time integration of scalars at level 0 from 0 to 0.1 with dt = 0.1 using RHS created at 0 Making slow rhs at time 0.1 for fast variables advancing from 0 to 0.15 Fast time integration at level 0 from 0 to 0.075 with dt = 0.075 Fast time integration at level 0 from 0.075 to 0.15 with dt = 0.075 Time integration of scalars at level 0 from 0 to 0.15 with dt = 0.15 using RHS created at 0.1 Making slow rhs at time 0.15 for fast variables advancing from 0 to 0.3 Fast time integration at level 0 from 0 to 0.075 with dt = 0.075 Fast time integration at level 0 from 0.075 to 0.15 with dt = 0.075 Fast time integration at level 0 from 0.15 to 0.225 with dt = 0.075 Fast time integration at level 0 from 0.225 to 0.3 with dt = 0.075 Time integration of scalars at level 0 from 0 to 0.3 with dt = 0.3 using RHS created at 0.15 Done with advance_dycore at level 0 [Level 0 step 1] Advanced 409600 cells Cloud fraction 0 0 Coarse STEP 1 ends. TIME = 0.3 DT = 0.3 Timestep time = 0.816800383 seconds. TIME= 0.3 MASS = 1.582864788e+11 RHO THETA = 4.842939606e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723045 Coarse STEP 2 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.807468182 (terrain aware) 0.807468182 (terrain unaware) Anelastic dt at level 0 would be: 11.40995801 (terrain aware) 11.40995801 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 2] ADVANCE from elapsed time = 0.3 to 0.6 with dt = 0.3 Making slow rhs at time 0.3 for fast variables advancing from 0.3 to 0.4 Fast time integration at level 0 from 0.3 to 0.4 with dt = 0.1 Time integration of scalars at level 0 from 0.3 to 0.4 with dt = 0.1 using RHS created at 0.3 Making slow rhs at time 0.4 for fast variables advancing from 0.3 to 0.45 Fast time integration at level 0 from 0.3 to 0.375 with dt = 0.075 Fast time integration at level 0 from 0.375 to 0.45 with dt = 0.075 Time integration of scalars at level 0 from 0.3 to 0.45 with dt = 0.15 using RHS created at 0.4 Making slow rhs at time 0.45 for fast variables advancing from 0.3 to 0.6 Fast time integration at level 0 from 0.3 to 0.375 with dt = 0.075 Fast time integration at level 0 from 0.375 to 0.45 with dt = 0.075 Fast time integration at level 0 from 0.45 to 0.525 with dt = 0.075 Fast time integration at level 0 from 0.525 to 0.6 with dt = 0.075 Time integration of scalars at level 0 from 0.3 to 0.6 with dt = 0.3 using RHS created at 0.45 Done with advance_dycore at level 0 [Level 0 step 2] Advanced 409600 cells Cloud fraction 0.3 0 Coarse STEP 2 ends. TIME = 0.6 DT = 0.3 Timestep time = 0.815893819 seconds. TIME= 0.6 MASS = 1.582864788e+11 RHO THETA = 4.842939599e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723078 Coarse STEP 3 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074701017 (terrain aware) 0.8074701017 (terrain unaware) Anelastic dt at level 0 would be: 11.41039039 (terrain aware) 11.41039039 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 3] ADVANCE from elapsed time = 0.6 to 0.9 with dt = 0.3 Making slow rhs at time 0.6 for fast variables advancing from 0.6 to 0.7 Fast time integration at level 0 from 0.6 to 0.7 with dt = 0.1 Time integration of scalars at level 0 from 0.6 to 0.7 with dt = 0.1 using RHS created at 0.6 Making slow rhs at time 0.7 for fast variables advancing from 0.6 to 0.75 Fast time integration at level 0 from 0.6 to 0.675 with dt = 0.075 Fast time integration at level 0 from 0.675 to 0.75 with dt = 0.075 Time integration of scalars at level 0 from 0.6 to 0.75 with dt = 0.15 using RHS created at 0.7 Making slow rhs at time 0.75 for fast variables advancing from 0.6 to 0.9 Fast time integration at level 0 from 0.6 to 0.675 with dt = 0.075 Fast time integration at level 0 from 0.675 to 0.75 with dt = 0.075 Fast time integration at level 0 from 0.75 to 0.825 with dt = 0.075 Fast time integration at level 0 from 0.825 to 0.9 with dt = 0.075 Time integration of scalars at level 0 from 0.6 to 0.9 with dt = 0.3 using RHS created at 0.75 Done with advance_dycore at level 0 [Level 0 step 3] Advanced 409600 cells Cloud fraction 0.6 0 Coarse STEP 3 ends. TIME = 0.9 DT = 0.3 Timestep time = 0.815244509 seconds. TIME= 0.9 MASS = 1.582864788e+11 RHO THETA = 4.842939592e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723111 Coarse STEP 4 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074840837 (terrain aware) 0.8074840837 (terrain unaware) Anelastic dt at level 0 would be: 11.41232152 (terrain aware) 11.41232152 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 4] ADVANCE from elapsed time = 0.9 to 1.2 with dt = 0.3 Making slow rhs at time 0.9 for fast variables advancing from 0.9 to 1 Fast time integration at level 0 from 0.9 to 1 with dt = 0.1 Time integration of scalars at level 0 from 0.9 to 1 with dt = 0.1 using RHS created at 0.9 Making slow rhs at time 1 for fast variables advancing from 0.9 to 1.05 Fast time integration at level 0 from 0.9 to 0.975 with dt = 0.075 Fast time integration at level 0 from 0.975 to 1.05 with dt = 0.075 Time integration of scalars at level 0 from 0.9 to 1.05 with dt = 0.15 using RHS created at 1 Making slow rhs at time 1.05 for fast variables advancing from 0.9 to 1.2 Fast time integration at level 0 from 0.9 to 0.975 with dt = 0.075 Fast time integration at level 0 from 0.975 to 1.05 with dt = 0.075 Fast time integration at level 0 from 1.05 to 1.125 with dt = 0.075 Fast time integration at level 0 from 1.125 to 1.2 with dt = 0.075 Time integration of scalars at level 0 from 0.9 to 1.2 with dt = 0.3 using RHS created at 1.05 Done with advance_dycore at level 0 [Level 0 step 4] Advanced 409600 cells Cloud fraction 0.9 0 Coarse STEP 4 ends. TIME = 1.2 DT = 0.3 Timestep time = 0.816175234 seconds. TIME= 1.2 MASS = 1.582864788e+11 RHO THETA = 4.842939585e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723144 Coarse STEP 5 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074821219 (terrain aware) 0.8074821219 (terrain unaware) Anelastic dt at level 0 would be: 11.41108132 (terrain aware) 11.41108132 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 5] ADVANCE from elapsed time = 1.2 to 1.5 with dt = 0.3 Making slow rhs at time 1.2 for fast variables advancing from 1.2 to 1.3 Fast time integration at level 0 from 1.2 to 1.3 with dt = 0.1 Time integration of scalars at level 0 from 1.2 to 1.3 with dt = 0.1 using RHS created at 1.2 Making slow rhs at time 1.3 for fast variables advancing from 1.2 to 1.35 Fast time integration at level 0 from 1.2 to 1.275 with dt = 0.075 Fast time integration at level 0 from 1.275 to 1.35 with dt = 0.075 Time integration of scalars at level 0 from 1.2 to 1.35 with dt = 0.15 using RHS created at 1.3 Making slow rhs at time 1.35 for fast variables advancing from 1.2 to 1.5 Fast time integration at level 0 from 1.2 to 1.275 with dt = 0.075 Fast time integration at level 0 from 1.275 to 1.35 with dt = 0.075 Fast time integration at level 0 from 1.35 to 1.425 with dt = 0.075 Fast time integration at level 0 from 1.425 to 1.5 with dt = 0.075 Time integration of scalars at level 0 from 1.2 to 1.5 with dt = 0.3 using RHS created at 1.35 Done with advance_dycore at level 0 [Level 0 step 5] Advanced 409600 cells Cloud fraction 1.2 0 Coarse STEP 5 ends. TIME = 1.5 DT = 0.3 Timestep time = 0.823214853 seconds. TIME= 1.5 MASS = 1.582864788e+11 RHO THETA = 4.842939578e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723177 Coarse STEP 6 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074935301 (terrain aware) 0.8074935301 (terrain unaware) Anelastic dt at level 0 would be: 11.41224335 (terrain aware) 11.41224335 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 6] ADVANCE from elapsed time = 1.5 to 1.8 with dt = 0.3 Making slow rhs at time 1.5 for fast variables advancing from 1.5 to 1.6 Fast time integration at level 0 from 1.5 to 1.6 with dt = 0.1 Time integration of scalars at level 0 from 1.5 to 1.6 with dt = 0.1 using RHS created at 1.5 Making slow rhs at time 1.6 for fast variables advancing from 1.5 to 1.65 Fast time integration at level 0 from 1.5 to 1.575 with dt = 0.075 Fast time integration at level 0 from 1.575 to 1.65 with dt = 0.075 Time integration of scalars at level 0 from 1.5 to 1.65 with dt = 0.15 using RHS created at 1.6 Making slow rhs at time 1.65 for fast variables advancing from 1.5 to 1.8 Fast time integration at level 0 from 1.5 to 1.575 with dt = 0.075 Fast time integration at level 0 from 1.575 to 1.65 with dt = 0.075 Fast time integration at level 0 from 1.65 to 1.725 with dt = 0.075 Fast time integration at level 0 from 1.725 to 1.8 with dt = 0.075 Time integration of scalars at level 0 from 1.5 to 1.8 with dt = 0.3 using RHS created at 1.65 Done with advance_dycore at level 0 [Level 0 step 6] Advanced 409600 cells Cloud fraction 1.5 0 Coarse STEP 6 ends. TIME = 1.8 DT = 0.3 Timestep time = 0.818060755 seconds. TIME= 1.8 MASS = 1.582864788e+11 RHO THETA = 4.842939571e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723210 Coarse STEP 7 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075034228 (terrain aware) 0.8075034228 (terrain unaware) Anelastic dt at level 0 would be: 11.41246269 (terrain aware) 11.41246269 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 7] ADVANCE from elapsed time = 1.8 to 2.1 with dt = 0.3 Making slow rhs at time 1.8 for fast variables advancing from 1.8 to 1.9 Fast time integration at level 0 from 1.8 to 1.9 with dt = 0.1 Time integration of scalars at level 0 from 1.8 to 1.9 with dt = 0.1 using RHS created at 1.8 Making slow rhs at time 1.9 for fast variables advancing from 1.8 to 1.95 Fast time integration at level 0 from 1.8 to 1.875 with dt = 0.075 Fast time integration at level 0 from 1.875 to 1.95 with dt = 0.075 Time integration of scalars at level 0 from 1.8 to 1.95 with dt = 0.15 using RHS created at 1.9 Making slow rhs at time 1.95 for fast variables advancing from 1.8 to 2.1 Fast time integration at level 0 from 1.8 to 1.875 with dt = 0.075 Fast time integration at level 0 from 1.875 to 1.95 with dt = 0.075 Fast time integration at level 0 from 1.95 to 2.025 with dt = 0.075 Fast time integration at level 0 from 2.025 to 2.1 with dt = 0.075 Time integration of scalars at level 0 from 1.8 to 2.1 with dt = 0.3 using RHS created at 1.95 Done with advance_dycore at level 0 [Level 0 step 7] Advanced 409600 cells Cloud fraction 1.8 0 Coarse STEP 7 ends. TIME = 2.1 DT = 0.3 Timestep time = 0.816687687 seconds. TIME= 2.1 MASS = 1.582864788e+11 RHO THETA = 4.842939564e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723243 Coarse STEP 8 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074842646 (terrain aware) 0.8074842646 (terrain unaware) Anelastic dt at level 0 would be: 11.41274117 (terrain aware) 11.41274117 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 8] ADVANCE from elapsed time = 2.1 to 2.4 with dt = 0.3 Making slow rhs at time 2.1 for fast variables advancing from 2.1 to 2.2 Fast time integration at level 0 from 2.1 to 2.2 with dt = 0.1 Time integration of scalars at level 0 from 2.1 to 2.2 with dt = 0.1 using RHS created at 2.1 Making slow rhs at time 2.2 for fast variables advancing from 2.1 to 2.25 Fast time integration at level 0 from 2.1 to 2.175 with dt = 0.075 Fast time integration at level 0 from 2.175 to 2.25 with dt = 0.075 Time integration of scalars at level 0 from 2.1 to 2.25 with dt = 0.15 using RHS created at 2.2 Making slow rhs at time 2.25 for fast variables advancing from 2.1 to 2.4 Fast time integration at level 0 from 2.1 to 2.175 with dt = 0.075 Fast time integration at level 0 from 2.175 to 2.25 with dt = 0.075 Fast time integration at level 0 from 2.25 to 2.325 with dt = 0.075 Fast time integration at level 0 from 2.325 to 2.4 with dt = 0.075 Time integration of scalars at level 0 from 2.1 to 2.4 with dt = 0.3 using RHS created at 2.25 Done with advance_dycore at level 0 [Level 0 step 8] Advanced 409600 cells Cloud fraction 2.1 0 Coarse STEP 8 ends. TIME = 2.4 DT = 0.3 Timestep time = 0.817486155 seconds. TIME= 2.4 MASS = 1.582864788e+11 RHO THETA = 4.842939557e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723276 Coarse STEP 9 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075106641 (terrain aware) 0.8075106641 (terrain unaware) Anelastic dt at level 0 would be: 11.4120838 (terrain aware) 11.4120838 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 9] ADVANCE from elapsed time = 2.4 to 2.7 with dt = 0.3 Making slow rhs at time 2.4 for fast variables advancing from 2.4 to 2.5 Fast time integration at level 0 from 2.4 to 2.5 with dt = 0.1 Time integration of scalars at level 0 from 2.4 to 2.5 with dt = 0.1 using RHS created at 2.4 Making slow rhs at time 2.5 for fast variables advancing from 2.4 to 2.55 Fast time integration at level 0 from 2.4 to 2.475 with dt = 0.075 Fast time integration at level 0 from 2.475 to 2.55 with dt = 0.075 Time integration of scalars at level 0 from 2.4 to 2.55 with dt = 0.15 using RHS created at 2.5 Making slow rhs at time 2.55 for fast variables advancing from 2.4 to 2.7 Fast time integration at level 0 from 2.4 to 2.475 with dt = 0.075 Fast time integration at level 0 from 2.475 to 2.55 with dt = 0.075 Fast time integration at level 0 from 2.55 to 2.625 with dt = 0.075 Fast time integration at level 0 from 2.625 to 2.7 with dt = 0.075 Time integration of scalars at level 0 from 2.4 to 2.7 with dt = 0.3 using RHS created at 2.55 Done with advance_dycore at level 0 [Level 0 step 9] Advanced 409600 cells Cloud fraction 2.4 0 Coarse STEP 9 ends. TIME = 2.7 DT = 0.3 Timestep time = 0.820175959 seconds. TIME= 2.7 MASS = 1.582864788e+11 RHO THETA = 4.84293955e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723309 Coarse STEP 10 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8074979086 (terrain aware) 0.8074979086 (terrain unaware) Anelastic dt at level 0 would be: 11.41256321 (terrain aware) 11.41256321 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 10] ADVANCE from elapsed time = 2.7 to 3 with dt = 0.3 Making slow rhs at time 2.7 for fast variables advancing from 2.7 to 2.8 Fast time integration at level 0 from 2.7 to 2.8 with dt = 0.1 Time integration of scalars at level 0 from 2.7 to 2.8 with dt = 0.1 using RHS created at 2.7 Making slow rhs at time 2.8 for fast variables advancing from 2.7 to 2.85 Fast time integration at level 0 from 2.7 to 2.775 with dt = 0.075 Fast time integration at level 0 from 2.775 to 2.85 with dt = 0.075 Time integration of scalars at level 0 from 2.7 to 2.85 with dt = 0.15 using RHS created at 2.8 Making slow rhs at time 2.85 for fast variables advancing from 2.7 to 3 Fast time integration at level 0 from 2.7 to 2.775 with dt = 0.075 Fast time integration at level 0 from 2.775 to 2.85 with dt = 0.075 Fast time integration at level 0 from 2.85 to 2.925 with dt = 0.075 Fast time integration at level 0 from 2.925 to 3 with dt = 0.075 Time integration of scalars at level 0 from 2.7 to 3 with dt = 0.3 using RHS created at 2.85 Done with advance_dycore at level 0 [Level 0 step 10] Advanced 409600 cells Cloud fraction 2.7 0 Coarse STEP 10 ends. TIME = 3 DT = 0.3 Timestep time = 0.819795423 seconds. TIME= 3 MASS = 1.582864788e+11 RHO THETA = 4.842939543e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723342 Coarse STEP 11 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075077004 (terrain aware) 0.8075077004 (terrain unaware) Anelastic dt at level 0 would be: 11.41128781 (terrain aware) 11.41128781 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 11] ADVANCE from elapsed time = 3 to 3.3 with dt = 0.3 Making slow rhs at time 3 for fast variables advancing from 3 to 3.1 Fast time integration at level 0 from 3 to 3.1 with dt = 0.1 Time integration of scalars at level 0 from 3 to 3.1 with dt = 0.1 using RHS created at 3 Making slow rhs at time 3.1 for fast variables advancing from 3 to 3.15 Fast time integration at level 0 from 3 to 3.075 with dt = 0.075 Fast time integration at level 0 from 3.075 to 3.15 with dt = 0.075 Time integration of scalars at level 0 from 3 to 3.15 with dt = 0.15 using RHS created at 3.1 Making slow rhs at time 3.15 for fast variables advancing from 3 to 3.3 Fast time integration at level 0 from 3 to 3.075 with dt = 0.075 Fast time integration at level 0 from 3.075 to 3.15 with dt = 0.075 Fast time integration at level 0 from 3.15 to 3.225 with dt = 0.075 Fast time integration at level 0 from 3.225 to 3.3 with dt = 0.075 Time integration of scalars at level 0 from 3 to 3.3 with dt = 0.3 using RHS created at 3.15 Done with advance_dycore at level 0 [Level 0 step 11] Advanced 409600 cells Cloud fraction 3 0 Coarse STEP 11 ends. TIME = 3.3 DT = 0.3 Timestep time = 0.818651207 seconds. TIME= 3.3 MASS = 1.582864788e+11 RHO THETA = 4.842939536e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723375 Coarse STEP 12 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075130141 (terrain aware) 0.8075130141 (terrain unaware) Anelastic dt at level 0 would be: 11.41078701 (terrain aware) 11.41078701 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 12] ADVANCE from elapsed time = 3.3 to 3.6 with dt = 0.3 Making slow rhs at time 3.3 for fast variables advancing from 3.3 to 3.4 Fast time integration at level 0 from 3.3 to 3.4 with dt = 0.1 Time integration of scalars at level 0 from 3.3 to 3.4 with dt = 0.1 using RHS created at 3.3 Making slow rhs at time 3.4 for fast variables advancing from 3.3 to 3.45 Fast time integration at level 0 from 3.3 to 3.375 with dt = 0.075 Fast time integration at level 0 from 3.375 to 3.45 with dt = 0.075 Time integration of scalars at level 0 from 3.3 to 3.45 with dt = 0.15 using RHS created at 3.4 Making slow rhs at time 3.45 for fast variables advancing from 3.3 to 3.6 Fast time integration at level 0 from 3.3 to 3.375 with dt = 0.075 Fast time integration at level 0 from 3.375 to 3.45 with dt = 0.075 Fast time integration at level 0 from 3.45 to 3.525 with dt = 0.075 Fast time integration at level 0 from 3.525 to 3.6 with dt = 0.075 Time integration of scalars at level 0 from 3.3 to 3.6 with dt = 0.3 using RHS created at 3.45 Done with advance_dycore at level 0 [Level 0 step 12] Advanced 409600 cells Cloud fraction 3.3 0 Coarse STEP 12 ends. TIME = 3.6 DT = 0.3 Timestep time = 0.819466383 seconds. TIME= 3.6 MASS = 1.582864788e+11 RHO THETA = 4.842939529e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723408 Coarse STEP 13 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075141566 (terrain aware) 0.8075141566 (terrain unaware) Anelastic dt at level 0 would be: 11.41196896 (terrain aware) 11.41196896 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 13] ADVANCE from elapsed time = 3.6 to 3.9 with dt = 0.3 Making slow rhs at time 3.6 for fast variables advancing from 3.6 to 3.7 Fast time integration at level 0 from 3.6 to 3.7 with dt = 0.1 Time integration of scalars at level 0 from 3.6 to 3.7 with dt = 0.1 using RHS created at 3.6 Making slow rhs at time 3.7 for fast variables advancing from 3.6 to 3.75 Fast time integration at level 0 from 3.6 to 3.675 with dt = 0.075 Fast time integration at level 0 from 3.675 to 3.75 with dt = 0.075 Time integration of scalars at level 0 from 3.6 to 3.75 with dt = 0.15 using RHS created at 3.7 Making slow rhs at time 3.75 for fast variables advancing from 3.6 to 3.9 Fast time integration at level 0 from 3.6 to 3.675 with dt = 0.075 Fast time integration at level 0 from 3.675 to 3.75 with dt = 0.075 Fast time integration at level 0 from 3.75 to 3.825 with dt = 0.075 Fast time integration at level 0 from 3.825 to 3.9 with dt = 0.075 Time integration of scalars at level 0 from 3.6 to 3.9 with dt = 0.3 using RHS created at 3.75 Done with advance_dycore at level 0 [Level 0 step 13] Advanced 409600 cells Cloud fraction 3.6 0 Coarse STEP 13 ends. TIME = 3.9 DT = 0.3 Timestep time = 0.81968474 seconds. TIME= 3.9 MASS = 1.582864788e+11 RHO THETA = 4.842939522e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723441 Coarse STEP 14 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075235873 (terrain aware) 0.8075235873 (terrain unaware) Anelastic dt at level 0 would be: 11.41198529 (terrain aware) 11.41198529 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 14] ADVANCE from elapsed time = 3.9 to 4.2 with dt = 0.3 Making slow rhs at time 3.9 for fast variables advancing from 3.9 to 4 Fast time integration at level 0 from 3.9 to 4 with dt = 0.1 Time integration of scalars at level 0 from 3.9 to 4 with dt = 0.1 using RHS created at 3.9 Making slow rhs at time 4 for fast variables advancing from 3.9 to 4.05 Fast time integration at level 0 from 3.9 to 3.975 with dt = 0.075 Fast time integration at level 0 from 3.975 to 4.05 with dt = 0.075 Time integration of scalars at level 0 from 3.9 to 4.05 with dt = 0.15 using RHS created at 4 Making slow rhs at time 4.05 for fast variables advancing from 3.9 to 4.2 Fast time integration at level 0 from 3.9 to 3.975 with dt = 0.075 Fast time integration at level 0 from 3.975 to 4.05 with dt = 0.075 Fast time integration at level 0 from 4.05 to 4.125 with dt = 0.075 Fast time integration at level 0 from 4.125 to 4.2 with dt = 0.075 Time integration of scalars at level 0 from 3.9 to 4.2 with dt = 0.3 using RHS created at 4.05 Done with advance_dycore at level 0 [Level 0 step 14] Advanced 409600 cells Cloud fraction 3.9 0 Coarse STEP 14 ends. TIME = 4.2 DT = 0.3 Timestep time = 0.821882859 seconds. TIME= 4.2 MASS = 1.582864788e+11 RHO THETA = 4.842939515e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723474 Coarse STEP 15 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075220008 (terrain aware) 0.8075220008 (terrain unaware) Anelastic dt at level 0 would be: 11.41230947 (terrain aware) 11.41230947 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 15] ADVANCE from elapsed time = 4.2 to 4.5 with dt = 0.3 Making slow rhs at time 4.2 for fast variables advancing from 4.2 to 4.3 Fast time integration at level 0 from 4.2 to 4.3 with dt = 0.1 Time integration of scalars at level 0 from 4.2 to 4.3 with dt = 0.1 using RHS created at 4.2 Making slow rhs at time 4.3 for fast variables advancing from 4.2 to 4.35 Fast time integration at level 0 from 4.2 to 4.275 with dt = 0.075 Fast time integration at level 0 from 4.275 to 4.35 with dt = 0.075 Time integration of scalars at level 0 from 4.2 to 4.35 with dt = 0.15 using RHS created at 4.3 Making slow rhs at time 4.35 for fast variables advancing from 4.2 to 4.5 Fast time integration at level 0 from 4.2 to 4.275 with dt = 0.075 Fast time integration at level 0 from 4.275 to 4.35 with dt = 0.075 Fast time integration at level 0 from 4.35 to 4.425 with dt = 0.075 Fast time integration at level 0 from 4.425 to 4.5 with dt = 0.075 Time integration of scalars at level 0 from 4.2 to 4.5 with dt = 0.3 using RHS created at 4.35 Done with advance_dycore at level 0 [Level 0 step 15] Advanced 409600 cells Cloud fraction 4.2 0 Coarse STEP 15 ends. TIME = 4.5 DT = 0.3 Timestep time = 0.819914381 seconds. TIME= 4.5 MASS = 1.582864788e+11 RHO THETA = 4.842939509e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723507 Coarse STEP 16 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.807529377 (terrain aware) 0.807529377 (terrain unaware) Anelastic dt at level 0 would be: 11.41141479 (terrain aware) 11.41141479 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 16] ADVANCE from elapsed time = 4.5 to 4.8 with dt = 0.3 Making slow rhs at time 4.5 for fast variables advancing from 4.5 to 4.6 Fast time integration at level 0 from 4.5 to 4.6 with dt = 0.1 Time integration of scalars at level 0 from 4.5 to 4.6 with dt = 0.1 using RHS created at 4.5 Making slow rhs at time 4.6 for fast variables advancing from 4.5 to 4.65 Fast time integration at level 0 from 4.5 to 4.575 with dt = 0.075 Fast time integration at level 0 from 4.575 to 4.65 with dt = 0.075 Time integration of scalars at level 0 from 4.5 to 4.65 with dt = 0.15 using RHS created at 4.6 Making slow rhs at time 4.65 for fast variables advancing from 4.5 to 4.8 Fast time integration at level 0 from 4.5 to 4.575 with dt = 0.075 Fast time integration at level 0 from 4.575 to 4.65 with dt = 0.075 Fast time integration at level 0 from 4.65 to 4.725 with dt = 0.075 Fast time integration at level 0 from 4.725 to 4.8 with dt = 0.075 Time integration of scalars at level 0 from 4.5 to 4.8 with dt = 0.3 using RHS created at 4.65 Done with advance_dycore at level 0 [Level 0 step 16] Advanced 409600 cells Cloud fraction 4.5 0 Coarse STEP 16 ends. TIME = 4.8 DT = 0.3 Timestep time = 0.821623514 seconds. TIME= 4.8 MASS = 1.582864788e+11 RHO THETA = 4.842939502e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723540 Coarse STEP 17 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075376396 (terrain aware) 0.8075376396 (terrain unaware) Anelastic dt at level 0 would be: 11.41211169 (terrain aware) 11.41211169 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 17] ADVANCE from elapsed time = 4.8 to 5.1 with dt = 0.3 Making slow rhs at time 4.8 for fast variables advancing from 4.8 to 4.9 Fast time integration at level 0 from 4.8 to 4.9 with dt = 0.1 Time integration of scalars at level 0 from 4.8 to 4.9 with dt = 0.1 using RHS created at 4.8 Making slow rhs at time 4.9 for fast variables advancing from 4.8 to 4.95 Fast time integration at level 0 from 4.8 to 4.875 with dt = 0.075 Fast time integration at level 0 from 4.875 to 4.95 with dt = 0.075 Time integration of scalars at level 0 from 4.8 to 4.95 with dt = 0.15 using RHS created at 4.9 Making slow rhs at time 4.95 for fast variables advancing from 4.8 to 5.1 Fast time integration at level 0 from 4.8 to 4.875 with dt = 0.075 Fast time integration at level 0 from 4.875 to 4.95 with dt = 0.075 Fast time integration at level 0 from 4.95 to 5.025 with dt = 0.075 Fast time integration at level 0 from 5.025 to 5.1 with dt = 0.075 Time integration of scalars at level 0 from 4.8 to 5.1 with dt = 0.3 using RHS created at 4.95 Done with advance_dycore at level 0 [Level 0 step 17] Advanced 409600 cells Cloud fraction 4.8 0 Coarse STEP 17 ends. TIME = 5.1 DT = 0.3 Timestep time = 0.820321023 seconds. TIME= 5.1 MASS = 1.582864788e+11 RHO THETA = 4.842939495e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723573 Coarse STEP 18 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075321708 (terrain aware) 0.8075321708 (terrain unaware) Anelastic dt at level 0 would be: 11.41199174 (terrain aware) 11.41199174 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 18] ADVANCE from elapsed time = 5.1 to 5.4 with dt = 0.3 Making slow rhs at time 5.1 for fast variables advancing from 5.1 to 5.2 Fast time integration at level 0 from 5.1 to 5.2 with dt = 0.1 Time integration of scalars at level 0 from 5.1 to 5.2 with dt = 0.1 using RHS created at 5.1 Making slow rhs at time 5.2 for fast variables advancing from 5.1 to 5.25 Fast time integration at level 0 from 5.1 to 5.175 with dt = 0.075 Fast time integration at level 0 from 5.175 to 5.25 with dt = 0.075 Time integration of scalars at level 0 from 5.1 to 5.25 with dt = 0.15 using RHS created at 5.2 Making slow rhs at time 5.25 for fast variables advancing from 5.1 to 5.4 Fast time integration at level 0 from 5.1 to 5.175 with dt = 0.075 Fast time integration at level 0 from 5.175 to 5.25 with dt = 0.075 Fast time integration at level 0 from 5.25 to 5.325 with dt = 0.075 Fast time integration at level 0 from 5.325 to 5.4 with dt = 0.075 Time integration of scalars at level 0 from 5.1 to 5.4 with dt = 0.3 using RHS created at 5.25 Done with advance_dycore at level 0 [Level 0 step 18] Advanced 409600 cells Cloud fraction 5.1 0 Coarse STEP 18 ends. TIME = 5.4 DT = 0.3 Timestep time = 0.820110177 seconds. TIME= 5.4 MASS = 1.582864788e+11 RHO THETA = 4.842939488e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723606 Coarse STEP 19 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075329893 (terrain aware) 0.8075329893 (terrain unaware) Anelastic dt at level 0 would be: 11.41223932 (terrain aware) 11.41223932 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 19] ADVANCE from elapsed time = 5.4 to 5.7 with dt = 0.3 Making slow rhs at time 5.4 for fast variables advancing from 5.4 to 5.5 Fast time integration at level 0 from 5.4 to 5.5 with dt = 0.1 Time integration of scalars at level 0 from 5.4 to 5.5 with dt = 0.1 using RHS created at 5.4 Making slow rhs at time 5.5 for fast variables advancing from 5.4 to 5.55 Fast time integration at level 0 from 5.4 to 5.475 with dt = 0.075 Fast time integration at level 0 from 5.475 to 5.55 with dt = 0.075 Time integration of scalars at level 0 from 5.4 to 5.55 with dt = 0.15 using RHS created at 5.5 Making slow rhs at time 5.55 for fast variables advancing from 5.4 to 5.7 Fast time integration at level 0 from 5.4 to 5.475 with dt = 0.075 Fast time integration at level 0 from 5.475 to 5.55 with dt = 0.075 Fast time integration at level 0 from 5.55 to 5.625 with dt = 0.075 Fast time integration at level 0 from 5.625 to 5.7 with dt = 0.075 Time integration of scalars at level 0 from 5.4 to 5.7 with dt = 0.3 using RHS created at 5.55 Done with advance_dycore at level 0 [Level 0 step 19] Advanced 409600 cells Cloud fraction 5.4 0 Coarse STEP 19 ends. TIME = 5.7 DT = 0.3 Timestep time = 0.825091395 seconds. TIME= 5.7 MASS = 1.582864788e+11 RHO THETA = 4.842939481e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723639 Coarse STEP 20 starts ... Based on cfl of one Compressible dt at level 0 would be: 0.8075370025 (terrain aware) 0.8075370025 (terrain unaware) Anelastic dt at level 0 would be: 11.41180484 (terrain aware) 11.41180484 (terrain unaware) Fixed dt at level 0 is: 0.3 smallest even ratio is: 4 [Level 0 step 20] ADVANCE from elapsed time = 5.7 to 6 with dt = 0.3 Making slow rhs at time 5.7 for fast variables advancing from 5.7 to 5.8 Fast time integration at level 0 from 5.7 to 5.8 with dt = 0.1 Time integration of scalars at level 0 from 5.7 to 5.8 with dt = 0.1 using RHS created at 5.7 Making slow rhs at time 5.8 for fast variables advancing from 5.7 to 5.85 Fast time integration at level 0 from 5.7 to 5.775 with dt = 0.075 Fast time integration at level 0 from 5.775 to 5.85 with dt = 0.075 Time integration of scalars at level 0 from 5.7 to 5.85 with dt = 0.15 using RHS created at 5.8 Making slow rhs at time 5.85 for fast variables advancing from 5.7 to 6 Fast time integration at level 0 from 5.7 to 5.775 with dt = 0.075 Fast time integration at level 0 from 5.775 to 5.85 with dt = 0.075 Fast time integration at level 0 from 5.85 to 5.925 with dt = 0.075 Fast time integration at level 0 from 5.925 to 6 with dt = 0.075 Time integration of scalars at level 0 from 5.7 to 6 with dt = 0.3 using RHS created at 5.85 Done with advance_dycore at level 0 [Level 0 step 20] Advanced 409600 cells Cloud fraction 5.7 0 Coarse STEP 20 ends. TIME = 6 DT = 0.3 Timestep time = 0.820848085 seconds. TIME= 6 MASS = 1.582864788e+11 RHO THETA = 4.842939474e+13 RHO SCALAR = 0 RHO QTOTAL = 1336723672 Writing native 3D plotfile Bomex_plt00020 3DPlotfile write time = 0.044062142 seconds. Writing native checkpoint Bomex_chk00020 Writing SurfaceLayer variables at level 0 Checkpoint write time = 0.030009494 seconds. Total Time: 17.7746624 Unused ParmParse Variables: [TOP]::amr.checkpoint_files_output(nvals = 1) :: [0] [TOP]::prob.T_0_Pert_Mag(nvals = 1) :: [0.1] [TOP]::prob.U_0_Pert_Mag(nvals = 1) :: [0.01] [TOP]::prob.V_0_Pert_Mag(nvals = 1) :: [0.01] [TOP]::prob.W_0_Pert_Mag(nvals = 1) :: [0.0] [TOP]::prob.custom_TKE(nvals = 1) :: [true] [TOP]::prob.pert_ref_height(nvals = 1) :: [1600.0] [TOP]::prob.qv_0_Pert_Mag(nvals = 1) :: [0.000025] AMReX (26.08-36-gf2cbba4afc9e) finalized