Initializing AMReX (26.05-3-g4ceb814db7d7)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
OMP initialized with 1 OMP threads
AMReX (26.05-3-g4ceb814db7d7) initialized
   MFIX git describe: 26.05
AMReX-Hydro git hash: 75da770ea36e4064b5947d7e56baa19f5bc92263
Number of levels: 1
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 8
  eb_pad        = 8

================================================================================
Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest
================================================================================


================================================================================
Warning: Overwriting amr.plot_int with value from mfix.plot_int
================================================================================


================================================================================
Warning: Overwriting amr.plot_file with value from mfix.plot_file
================================================================================


================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient

================================================================================
Warning: mfix.stop_time and mfix.max_step are both defined.
The simulation will end when either condition is met.
================================================================================


--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------

Scalar diffusion coefficients
Tracer0: 0
Specified constant pressure drop: (1000,0,0)

Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: ParticleRunTime


================================================================================
Warning: Regridding disabled for single level, single rank run.
================================================================================

Drag model: BVK2
Convection model not specified. Setting default:
  mfix.convection.model = RanzMarshall

 Building cylinder geometry.
 
 Internal Flow: 1
 Radius:    0.49
 Height:    -1
 Direction: 0
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 1.5, 1.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
Auto generating particles ...
Total number of generated particles: 2,578
Time spent in initializing particles 0.014725524


****************************************
  Coverage report:  Grids        Cells
          regular:      0           45
          covered:      0         1000
              cut:      1           80
****************************************

Clean up auto-generated particles.

  IC Region                Generated           Removed         Remaining
  ****************  ****************  ****************  ****************
  fluid-only                       0                 0                 0
  bed                          2,578             2,409               169
  ----------------  ----------------  ----------------  ----------------
  Total                        2,578             2,409               169
  ****************  ****************  ****************  ****************
On level 0: set volume fraction bcs
Setting original sum_vol to 0.644240679
On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 0 fillpatch tracer
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0  1.301306859  1.301322376
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 0.4563612149  0.6312469473  0.6273563008
Doing initial pressure iterations with dt = 0.006801943661
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

In initial_iterations: iter = 0
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 3.697042672e-13, 2.031770624e-13
MLMG: Timers: Solve = 0.003277355 Iter = 0.003168349 Bottom = 0.002810247
 >> After projection
  * On level 0 max(abs(diveu)) = 6.091405574e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.184663544  0.6154017352  0.6154968516
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.506464175  0.6802092129  0.7564588585
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 3.697042672e-13, 2.031770624e-13
MLMG: Timers: Solve = 0.003329827 Iter = 0.00325295 Bottom = 0.002887474
 >> After projection
  * On level 0 max(abs(diveu)) = 6.091405574e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.438456254  0.6796567896  0.7561562011
   max(abs(gpx/gpy/gpz))  = 248.6965763  36.40014479  24.54807166
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.364336878  0.6780461341  0.8153984234
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 3.697042672e-13, 2.031770624e-13
MLMG: Timers: Solve = 0.003518509 Iter = 0.003456037 Bottom = 0.003095046
 >> After projection
  * On level 0 max(abs(diveu)) = 6.091405574e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 7.369754936  0.6780598635  0.8152712253
   max(abs(gpx/gpy/gpz))  = 299.8915438  51.98863345  35.69580442
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 7.286687636  0.6737953888  0.8488246006
On level 0: set velocity bcs
On level 0: set density bcs
On level 0: set tracer bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set species bcs
Enclosed domain volume is   0.644240679
Time spent in init      0.221817106

  Writing plotfile TracerAdv_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 1: from old_time 0 to new time 0.005958528374 with dt = 0.005958528374

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 9.410694785
MLMG: Initial rhs               = 1.819616165
MLMG: Initial residual (resid0) = 1.819616165
MLMG: Final Iter. 12 resid, resid/bnorm = 3.697042672e-13, 2.031770624e-13
MLMG: Timers: Solve = 0.003268792 Iter = 0.003200111 Bottom = 0.002844309
 >> After projection
  * On level 0 max(abs(diveu)) = 6.091405574e-13
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.351057075  0.6169658977  0.616579362
   max(abs(gpx/gpy/gpz))  = 316.1050941  57.71903643  40.5839384
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.727736976  0.6351815862  0.7015683164
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.784097074
MLMG: Initial rhs               = 3.371387861
MLMG: Initial residual (resid0) = 3.371387861
MLMG: Final Iter. 11 resid, resid/bnorm = 2.745359495e-12, 8.143113782e-13
MLMG: Timers: Solve = 0.003310083 Iter = 0.003246227 Bottom = 0.002902874
 >> After projection
  * On level 0 max(abs(diveu)) = 4.514648418e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 6.263541401  0.6122980239  0.6082174076
   max(abs(gpx/gpy/gpz))  = 290.7369498  46.28606072  32.11252583
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 6.486677121  0.6324634483  0.7071064359
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005958528374
done. 
   Time per fluid step      0.029096224
   Time per 1 particle steps 8.3734e-05
   Coupling time per step   0.002757796
Sum tracer volume wgt = 157.3298941 141.6039915
   Time per step        0.032461813

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 2: from old_time 0.005958528374 to new time 0.01131216883 with dt = 0.005353640456

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 8.931049538
MLMG: Initial rhs               = 3.477330915
MLMG: Initial residual (resid0) = 3.477330915
MLMG: Final Iter. 11 resid, resid/bnorm = 2.209343819e-12, 6.35356218e-13
MLMG: Timers: Solve = 0.003277052 Iter = 0.003213807 Bottom = 0.002881244
 >> After projection
  * On level 0 max(abs(diveu)) = 3.63588827e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.77173115  0.622265202  0.6946324203
   max(abs(gpx/gpy/gpz))  = 323.904294  48.1931275  33.66498854
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.66553021  0.6557454813  0.881634967
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.24285133
MLMG: Initial rhs               = 6.304108899
MLMG: Initial residual (resid0) = 6.304108899
MLMG: Final Iter. 11 resid, resid/bnorm = 1.65778502e-12, 2.629689695e-13
MLMG: Timers: Solve = 0.003364334 Iter = 0.003300144 Bottom = 0.002936561
 >> After projection
  * On level 0 max(abs(diveu)) = 2.705709759e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 10.55464151  0.6204199791  0.6776638648
   max(abs(gpx/gpy/gpz))  = 451.9016124  74.83842783  51.68679569
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 11.45494682  0.6519897684  0.8743317992
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.005353640456
done. 
   Time per fluid step      0.029809263
   Time per 1 particle steps 4.3458e-05
   Coupling time per step   0.002734697
Sum tracer volume wgt = 157.6837259 141.6039915
   Time per step        0.033138534

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 3: from old_time 0.01131216883 to new time 0.01592458993 with dt = 0.004612421096

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 13.65418866
MLMG: Initial rhs               = 6.077636939
MLMG: Initial residual (resid0) = 6.077636939
MLMG: Final Iter. 11 resid, resid/bnorm = 1.838529329e-12, 3.025072651e-13
MLMG: Timers: Solve = 0.003231258 Iter = 0.003167716 Bottom = 0.00282378
 >> After projection
  * On level 0 max(abs(diveu)) = 2.997370979e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.88614333  0.6455286534  0.8480297851
   max(abs(gpx/gpy/gpz))  = 509.9185902  83.21679804  58.19597325
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.73934614  0.7893404504  1.091787554
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.25786394
MLMG: Initial rhs               = 11.19096957
MLMG: Initial residual (resid0) = 11.19096957
MLMG: Final Iter. 11 resid, resid/bnorm = 2.499778162e-12, 2.233745832e-13
MLMG: Timers: Solve = 0.002993026 Iter = 0.002929189 Bottom = 0.002603701
 >> After projection
  * On level 0 max(abs(diveu)) = 4.063503126e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 14.6667606  0.6455058367  0.8240571635
   max(abs(gpx/gpy/gpz))  = 617.6128372  104.4479134  74.90696666
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 15.5452717  0.7767543275  1.079063169
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004612421096
done. 
   Time per fluid step      0.028094229
   Time per 1 particle steps 4.3001e-05
   Coupling time per step   0.00267747
Sum tracer volume wgt = 158.2148613 141.6039915
   Time per step        0.031277825

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 4: from old_time 0.01592458993 to new time 0.02003269244 with dt = 0.004108102514

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 21.30774783
MLMG: Initial rhs               = 10.97744209
MLMG: Initial residual (resid0) = 10.97744209
MLMG: Final Iter. 11 resid, resid/bnorm = 2.838618229e-12, 2.585864909e-13
MLMG: Timers: Solve = 0.003254516 Iter = 0.00319029 Bottom = 0.002853102
 >> After projection
  * On level 0 max(abs(diveu)) = 4.657283537e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.26731519  0.6595228552  1.030158354
   max(abs(gpx/gpy/gpz))  = 666.9400626  110.3703325  80.49238072
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.89226003  0.9661537199  1.314430062
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 29.00988832
MLMG: Initial rhs               = 14.42861004
MLMG: Initial residual (resid0) = 14.42861004
MLMG: Final Iter. 11 resid, resid/bnorm = 2.075395411e-12, 1.43838901e-13
MLMG: Timers: Solve = 0.002994582 Iter = 0.002930891 Bottom = 0.002604665
 >> After projection
  * On level 0 max(abs(diveu)) = 3.420918845e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 18.04060922  0.6586642958  1.003166891
   max(abs(gpx/gpy/gpz))  = 749.7463096  123.6374059  93.8008454
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 18.70783691  0.9518888152  1.296940297
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.004108102514
done. 
   Time per fluid step      0.028213019
   Time per 1 particle steps 7.175e-05
   Coupling time per step   0.002682911
Sum tracer volume wgt = 158.8912987 141.6039915
   Time per step        0.031493777

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 5: from old_time 0.02003269244 to new time 0.02380401311 with dt = 0.003771320674

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 28.77922057
MLMG: Initial rhs               = 14.23850282
MLMG: Initial residual (resid0) = 14.23850282
MLMG: Final Iter. 11 resid, resid/bnorm = 2.199185278e-12, 1.544534075e-13
MLMG: Timers: Solve = 0.003085488 Iter = 0.003021596 Bottom = 0.002683406
 >> After projection
  * On level 0 max(abs(diveu)) = 3.616134323e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 21.10174176  0.8071147448  1.224321021
   max(abs(gpx/gpy/gpz))  = 789.5535991  127.1528493  97.67239052
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.35286951  1.171738235  1.536857314
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 36.30270227
MLMG: Initial rhs               = 16.52422288
MLMG: Initial residual (resid0) = 16.52422288
MLMG: Final Iter. 11 resid, resid/bnorm = 2.736810778e-12, 1.656241748e-13
MLMG: Timers: Solve = 0.003020473 Iter = 0.002952555 Bottom = 0.002625058
 >> After projection
  * On level 0 max(abs(diveu)) = 4.520167903e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 20.86599292  0.7802499295  1.196219755
   max(abs(gpx/gpy/gpz))  = 859.0063305  134.1755694  111.5197958
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 21.18752888  1.153777129  1.516515591
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003771320674
done. 
   Time per fluid step      0.028713414
   Time per 1 particle steps 4.3136e-05
   Coupling time per step   0.002750566
Sum tracer volume wgt = 159.6511637 141.6039915
   Time per step        0.032029468

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 6: from old_time 0.02380401311 to new time 0.02733835087 with dt = 0.003534337753

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 35.94395149
MLMG: Initial rhs               = 16.34530605
MLMG: Initial residual (resid0) = 16.34530605
MLMG: Final Iter. 11 resid, resid/bnorm = 2.656430631e-12, 1.625194795e-13
MLMG: Timers: Solve = 0.003068115 Iter = 0.003002751 Bottom = 0.002675921
 >> After projection
  * On level 0 max(abs(diveu)) = 4.380728277e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.51172241  1.011430449  1.420185648
   max(abs(gpx/gpy/gpz))  = 894.1597918  136.1882227  116.117816
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.58947351  1.389895166  1.751064469
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 43.22249661
MLMG: Initial rhs               = 18.01676068
MLMG: Initial residual (resid0) = 18.01676068
MLMG: Final Iter. 11 resid, resid/bnorm = 3.299615654e-12, 1.831414489e-13
MLMG: Timers: Solve = 0.003086799 Iter = 0.003022553 Bottom = 0.002698658
 >> After projection
  * On level 0 max(abs(diveu)) = 5.156942199e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 23.26945072  0.9848188818  1.390402643
   max(abs(gpx/gpy/gpz))  = 954.3123276  143.8909476  128.9497827
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 23.33167601  1.372721194  1.726641392
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003534337753
done. 
   Time per fluid step      0.028410803
   Time per 1 particle steps 4.3392e-05
   Coupling time per step   0.002792115
Sum tracer volume wgt = 160.4243322 141.6039915
   Time per step        0.031792741

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 7: from old_time 0.02733835087 to new time 0.03068404225 with dt = 0.003345691379

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 42.76594918
MLMG: Initial rhs               = 17.99753798
MLMG: Initial residual (resid0) = 17.99753798
MLMG: Final Iter. 11 resid, resid/bnorm = 3.508285423e-12, 1.949314083e-13
MLMG: Timers: Solve = 0.003004112 Iter = 0.002939474 Bottom = 0.002605816
 >> After projection
  * On level 0 max(abs(diveu)) = 5.540401173e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.57603141  1.20056661  1.606238656
   max(abs(gpx/gpy/gpz))  = 983.4910099  146.035585  132.7171032
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.58806488  1.590482547  1.946517062
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.7100149
MLMG: Initial rhs               = 19.26347138
MLMG: Initial residual (resid0) = 19.26347138
MLMG: Final Iter. 11 resid, resid/bnorm = 3.949963117e-12, 2.050493931e-13
MLMG: Timers: Solve = 0.002998947 Iter = 0.002925893 Bottom = 0.00260014
 >> After projection
  * On level 0 max(abs(diveu)) = 6.034249852e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 25.33434841  1.174620785  1.576227416
   max(abs(gpx/gpy/gpz))  = 1032.683533  152.3080511  143.5327708
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 25.32983181  1.571968263  1.92118696
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003345691379
done. 
   Time per fluid step      0.027862693
   Time per 1 particle steps 4.3875e-05
   Coupling time per step   0.002682913
Sum tracer volume wgt = 161.1357314 141.6039915
   Time per step        0.031044295

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 8: from old_time 0.03068404225 to new time 0.03386635551 with dt = 0.003182313268

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 49.18267049
MLMG: Initial rhs               = 19.22734118
MLMG: Initial residual (resid0) = 19.22734118
MLMG: Final Iter. 11 resid, resid/bnorm = 3.859393256e-12, 2.007242302e-13
MLMG: Timers: Solve = 0.003138071 Iter = 0.003047355 Bottom = 0.002722354
 >> After projection
  * On level 0 max(abs(diveu)) = 5.844844358e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.34934678  1.375014542  1.779071039
   max(abs(gpx/gpy/gpz))  = 1057.112401  153.769335  146.5369264
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.29801352  1.771134866  2.124579973
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.72335046
MLMG: Initial rhs               = 19.7026339
MLMG: Initial residual (resid0) = 19.7026339
MLMG: Final Iter. 11 resid, resid/bnorm = 6.496691862e-12, 3.297372268e-13
MLMG: Timers: Solve = 0.003089264 Iter = 0.003011667 Bottom = 0.002687814
 >> After projection
  * On level 0 max(abs(diveu)) = 9.258791222e-12
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 27.10789348  1.351036828  1.749889636
   max(abs(gpx/gpy/gpz))  = 1097.899435  158.2997374  155.360904
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 27.04644907  1.75062212  2.099955003
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.003182313268
done. 
   Time per fluid step      0.028874384
   Time per 1 particle steps 7.2058e-05
   Coupling time per step   0.002713958
Sum tracer volume wgt = 161.7362659 141.6039915
   Time per step        0.032111958

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 9: from old_time 0.03386635551 to new time 0.036918205 with dt = 0.00305184949

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 55.1743406
MLMG: Initial rhs               = 19.68228359
MLMG: Initial residual (resid0) = 19.68228359
MLMG: Final Iter. 11 resid, resid/bnorm = 6.405324029e-12, 3.254360196e-13
MLMG: Timers: Solve = 0.003102027 Iter = 0.003037333 Bottom = 0.002708095
 >> After projection
  * On level 0 max(abs(diveu)) = 9.133295558e-12
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.87965437  1.534626127  2.018637668
   max(abs(gpx/gpy/gpz))  = 1118.579586  159.1578464  157.8271282
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.78308648  1.9291183  2.334359403
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 61.31428452
MLMG: Initial rhs               = 19.79060403
MLMG: Initial residual (resid0) = 19.79060403
MLMG: Final Iter. 11 resid, resid/bnorm = 9.042072646e-12, 4.568871487e-13
MLMG: Timers: Solve = 0.003116318 Iter = 0.003028739 Bottom = 0.002702262
 >> After projection
  * On level 0 max(abs(diveu)) = 1.379522708e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 28.63814505  1.512164329  1.98793966
   max(abs(gpx/gpy/gpz))  = 1152.29707  163.0796425  164.7868047
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 28.53563688  1.907506104  2.308401603
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.00305184949
done. 
   Time per fluid step      0.028643192
   Time per 1 particle steps 4.2804e-05
   Coupling time per step   0.00301207
Sum tracer volume wgt = 162.1804193 141.6039915
   Time per step        0.032189139

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs

   Step 10: from old_time 0.036918205 to new time 0.03986431983 with dt = 0.002946114823

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 60.72695759
MLMG: Initial rhs               = 19.82071042
MLMG: Initial residual (resid0) = 19.82071042
MLMG: Final Iter. 11 resid, resid/bnorm = 8.825856712e-12, 4.452845799e-13
MLMG: Timers: Solve = 0.003075663 Iter = 0.00301123 Bottom = 0.002673963
 >> After projection
  * On level 0 max(abs(diveu)) = 1.346754396e-11
On level 0 fillpatch rho
On level 0: set tracer bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 30.21130943  1.676578058  2.251347171
   max(abs(gpx/gpy/gpz))  = 1169.853262  165.1235293  166.7941466
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 30.08186843  2.064296427  2.560169003
On level 0: set volume fraction bcs
On level 0: set volume fraction bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 0 fillpatch h
On level 0 fillpatch T
On level 0 fillpatch X
On level 0 fillpatch tracer
 Finished fillpatch before predictor
On level 0: set density bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set species bcs
MAC Projection:
 >> Before projection
  * On level 0 max(abs(diveu)) = 66.41490017
MLMG: Initial rhs               = 19.59618118
MLMG: Initial residual (resid0) = 19.59618118
MLMG: Final Iter. 11 resid, resid/bnorm = 9.588690952e-12, 4.89314263e-13
MLMG: Timers: Solve = 0.003089902 Iter = 0.003024681 Bottom = 0.002677819
 >> After projection
  * On level 0 max(abs(diveu)) = 1.468299271e-11
On level 0 fillpatch rho
On level 0: set species bcs
On level 0: set species bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set temperature bcs
On level 0: set enthalpy bcs
On level 0: set tracer bcs
On level 0: set tracer bcs
On level 0: set velocity bcs
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 29.97047858  1.655565553  2.218756677
   max(abs(gpx/gpy/gpz))  = 1198.137879  171.8421553  172.3355926
Min and Max of epf 0.7033339221 0.9996153806
On level 0: set velocity bcs
On level 0: set vec bcs
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 29.8363623  2.043197999  2.535049395
On level 0: set velocity bcs
On level 0: set temperature bcs
On level 0: set velocity bcs
Evolving particles on level: 0 ... with fluid dt 0.002946114823
done. 
   Time per fluid step      0.027907743
   Time per 1 particle steps 4.2934e-05
   Coupling time per step   0.002829624
Sum tracer volume wgt = 162.4514574 141.6039915
   Time per step        0.031475886
  Writing plotfile TracerAdv_plt00010 at time 0.03986431983
Time spent in main (after init) 0.322516554
Time spent in main      0.54433366

AMReX (26.05-3-g4ceb814db7d7) finalized