Initializing AMReX (26.06-11-g9ed35ab0e584)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
OMP initialized with 1 OMP threads
AMReX (26.06-11-g9ed35ab0e584) initialized
   MFIX git describe: 26.06-20-g272ef9961018
AMReX-Hydro git hash: 9446740c59feca3bf007a6e6d95a6080816c33ec
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.01268663913
MLMG: Iteration   2 Fine resid/bnorm = 0.000155113762
MLMG: Iteration   3 Fine resid/bnorm = 2.368476581e-06
MLMG: Iteration   4 Fine resid/bnorm = 5.277097321e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.732796509e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.73056011e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.754530717e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.690126966e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.430526884e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.783036592e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.680935027e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.139598215e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.047952153e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.223517786e-10, 2.047952153e-12
MLMG: Timers: Solve = 0.208011716 Iter = 0.163483135 Bottom = 0.017548131
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  5.751510379e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  1.352695733e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08880464396
MLMG: Iteration   2 Fine resid/bnorm = 0.003801801426
MLMG: Iteration   3 Fine resid/bnorm = 0.0001815046413
MLMG: Iteration   4 Fine resid/bnorm = 8.740867643e-06
MLMG: Iteration   5 Fine resid/bnorm = 4.055809418e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.8876266e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.44022858e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.534157766e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.66796117e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.767226261e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 5.971001471e-12, 1.66796117e-12
MLMG: Timers: Solve = 0.054298248 Iter = 0.052152179 Bottom = 0.013715944
 >> After projection
  * On level 0 max(abs(diveu)) = 1.331178811e-10
  * On level 1 max(abs(diveu)) = 1.439894289e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  5.381027705e-13
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  1.230644213e-12
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.008200357351
MLMG: Iteration   2 Fine resid/bnorm = 0.0001084397312
MLMG: Iteration   3 Fine resid/bnorm = 1.572860987e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.6044221e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.635058493e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.574893336e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.583300679e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.616461685e-12
MLMG: Iteration   8 Crse resid/bnorm = 8.452631512e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.668020321e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.082013708e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 4.042204765e-11, 9.082013708e-12
MLMG: Timers: Solve = 0.130611256 Iter = 0.109074318 Bottom = 0.012492545
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  5.55199492e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  1.191066867e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.0227540725
MLMG: Iteration   2 Fine resid/bnorm = 0.001312338683
MLMG: Iteration   3 Fine resid/bnorm = 5.738866024e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.763596935e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.351101437e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.581439646e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.146699214e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.456638156e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.481481977e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.553121974e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.752404795e-12, 6.481481977e-13
MLMG: Timers: Solve = 0.053943199 Iter = 0.052503916 Bottom = 0.013887545
 >> After projection
  * On level 0 max(abs(diveu)) = 2.496320477e-11
  * On level 1 max(abs(diveu)) = 3.312330534e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  5.560338351e-13
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  4.554546511e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  1.184134954e-12
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  9.094109227e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.001849722311
MLMG: Iteration   2 Fine resid/bnorm = 2.501641791e-05
MLMG: Iteration   3 Fine resid/bnorm = 4.744685423e-07
MLMG: Iteration   4 Fine resid/bnorm = 1.344941781e-08
MLMG: Iteration   5 Fine resid/bnorm = 6.474554857e-10
MLMG: Iteration   6 Fine resid/bnorm = 5.55112192e-11
MLMG: Iteration   7 Fine resid/bnorm = 5.568697146e-12
MLMG: Iteration   7 Crse resid/bnorm = 4.860975869e-10
MLMG: Iteration   8 Fine resid/bnorm = 5.538324912e-13
MLMG: Iteration   8 Crse resid/bnorm = 4.831350184e-11
MLMG: Iteration   9 Fine resid/bnorm = 5.515485632e-14
MLMG: Iteration   9 Crse resid/bnorm = 4.829496011e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.345372698e-12, 4.829496011e-12
MLMG: Timers: Solve = 0.126484141 Iter = 0.11001629 Bottom = 0.012091638
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  5.09778413e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  1.146012474e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02144402612
MLMG: Iteration   2 Fine resid/bnorm = 0.001136924491
MLMG: Iteration   3 Fine resid/bnorm = 4.908648375e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.380430986e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.182157886e-07
MLMG: Iteration   6 Fine resid/bnorm = 5.886826493e-09
MLMG: Iteration   7 Fine resid/bnorm = 2.889197885e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.380066969e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.352348682e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.913091564e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.934423314e-12, 6.352348682e-13
MLMG: Timers: Solve = 0.054418534 Iter = 0.052986413 Bottom = 0.014047355
 >> After projection
  * On level 0 max(abs(diveu)) = 2.773426727e-11
  * On level 1 max(abs(diveu)) = 3.104999397e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.047598906e-13
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  2.106510821e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  1.140082656e-12
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  6.202641569e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.0003000102902
MLMG: Iteration   2 Fine resid/bnorm = 2.70517134e-06
MLMG: Iteration   3 Fine resid/bnorm = 6.80597581e-08
MLMG: Iteration   4 Fine resid/bnorm = 4.434232778e-09
MLMG: Iteration   5 Fine resid/bnorm = 3.483457586e-10
MLMG: Iteration   6 Fine resid/bnorm = 2.851243646e-11
MLMG: Iteration   7 Fine resid/bnorm = 2.400235063e-12
MLMG: Iteration   7 Crse resid/bnorm = 2.42720778e-10
MLMG: Iteration   8 Fine resid/bnorm = 2.070099744e-13
MLMG: Iteration   8 Crse resid/bnorm = 2.382135726e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.825830225e-14
MLMG: Iteration   9 Crse resid/bnorm = 2.351342934e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 1.08707108e-12, 2.351342934e-12
MLMG: Timers: Solve = 0.126919493 Iter = 0.1104277 Bottom = 0.013166512
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.32975104e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  1.221228548e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      1.721036312

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649206
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.0211598841
MLMG: Iteration   2 Fine resid/bnorm = 0.001120907939
MLMG: Iteration   3 Fine resid/bnorm = 4.818032548e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.337859613e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.161924108e-07
MLMG: Iteration   6 Fine resid/bnorm = 5.78344807e-09
MLMG: Iteration   7 Fine resid/bnorm = 2.834754025e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.34858813e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.168742029e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.916712657e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.870000503e-12, 6.168742029e-13
MLMG: Timers: Solve = 0.054885445 Iter = 0.053192563 Bottom = 0.014770634
 >> After projection
  * On level 0 max(abs(diveu)) = 2.218472255e-11
  * On level 1 max(abs(diveu)) = 3.086401146e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  5.373666496e-13
   max(abs(gpx/gpy/gpz))  = 14.22686542  14.22686542  1.829895115e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.260835124e-12
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  6.080882208e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.007586520303
MLMG: Iteration   2 Fine resid/bnorm = 9.935873836e-05
MLMG: Iteration   3 Fine resid/bnorm = 1.439326371e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.423448521e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.460938504e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.468447987e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.489665326e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.521663315e-12
MLMG: Iteration   8 Crse resid/bnorm = 8.526641794e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.58133449e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.138203727e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.910132981e-11, 9.138203727e-12
MLMG: Timers: Solve = 0.125763693 Iter = 0.109354177 Bottom = 0.012806097
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  2.189097102e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  6.630064427e-13
   Time per fluid step      0.450559311
   Time per step        0.451825134
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.462056241
Time spent in main      2.183092553

AMReX (26.06-11-g9ed35ab0e584) finalized