Initializing AMReX (26.09-175-gf2e8bf0a946a)...
MPI initialized with 1 MPI processes
MPI initialized with thread support level 0
OMP initialized with 1 OMP threads
AMReX (26.09-175-gf2e8bf0a946a) initialized
   MFIX git describe: 26.09-9-g69f87333fb2c
AMReX-Hydro git hash: e49df248aabd2cc11865eb5be734a2f5f2f65ee5
Number of levels: 2
RunType is Standard
Auto-generating level-set parameters:
  eb_refinement = 1
  levelset_pad  = 2
  eb_pad        = 2

================================================================================
Warning: Overwriting amr.check_file with value from mfix.check_file
================================================================================

Simulation is transient
Fluid constraint not specified. Setting default:
  mfix.constraint = IncompressibleFluid

--------------------------------------------------------------------------------
Info: Max effective viscosity factor not specified.
Using default 1e+06
--------------------------------------------------------------------------------


Load balance setup:
   Type:      SingleGrid
   Strategy:  KnapSack
   Weighting: CellCount


 Building cylinder geometry.
 
 Internal Flow: 0
 Radius:    0.2
 Height:    -1
 Direction: 2
 Rotation angle: 0
 Rotation axis: 0
 Center:    0.5, 0.5, 0.5
Done making the fluid eb levels ...
PostProcessBaseGrids
Making new level 0 from scratch

On level 0 updated BC areas:
ErrorErr on level 0
Making new level 1 from scratch

On level 1 updated BC areas:


****************************************
  Coverage report:  Grids        Cells
          regular:      0         6944
          covered:      0          832
              cut:      1          416
****************************************

On level 0 fillpatch epf
On level 0 fillpatch rho
On level 0 fillpatch vel
On level 1 fillpatch epf
On level 1 fillpatch rho
On level 1 fillpatch vel
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
Initial projection:
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 0.70710678  0.70710678  0
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 29.77431549
  * On lev 1 max(abs(rhs)) = 59.74347518

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 59.74347518
MLMG: Initial residual (resid0) = 59.74347518
MLMG: Iteration   1 Fine resid/bnorm = 0.01268663913
MLMG: Iteration   2 Fine resid/bnorm = 0.000155113762
MLMG: Iteration   3 Fine resid/bnorm = 2.368476581e-06
MLMG: Iteration   4 Fine resid/bnorm = 5.277097321e-08
MLMG: Iteration   5 Fine resid/bnorm = 2.732796509e-09
MLMG: Iteration   6 Fine resid/bnorm = 2.73056011e-10
MLMG: Iteration   7 Fine resid/bnorm = 2.754530717e-11
MLMG: Iteration   8 Fine resid/bnorm = 2.690126966e-12
MLMG: Iteration   8 Crse resid/bnorm = 1.430526884e-10
MLMG: Iteration   9 Fine resid/bnorm = 2.783036592e-13
MLMG: Iteration   9 Crse resid/bnorm = 1.680935027e-11
MLMG: Iteration  10 Fine resid/bnorm = 3.139598215e-14
MLMG: Iteration  10 Crse resid/bnorm = 2.047952153e-12
MLMG: Final Iter. 10 resid, resid/bnorm = 1.223517786e-10, 2.047952153e-12
MLMG: Timers: Solve = 0.145414848 Iter = 0.119981405 Bottom = 0.011988704
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.47855403  1.47855403  5.751510379e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.525952535  1.525952535  1.352695733e-12
Doing initial pressure iterations with dt = 0.004607777661
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho

In initial_iterations: iter = 0
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1704.412637
  * On level 1 max(abs(diveu)) = 1155.100083
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.57982043
MLMG: Initial residual (resid0) = 3.57982043
MLMG: Iteration   1 Fine resid/bnorm = 0.08880464396
MLMG: Iteration   2 Fine resid/bnorm = 0.003801801426
MLMG: Iteration   3 Fine resid/bnorm = 0.0001815046413
MLMG: Iteration   4 Fine resid/bnorm = 8.740867642e-06
MLMG: Iteration   5 Fine resid/bnorm = 4.055809418e-07
MLMG: Iteration   6 Fine resid/bnorm = 1.887626585e-08
MLMG: Iteration   7 Fine resid/bnorm = 8.440229028e-10
MLMG: Iteration   8 Fine resid/bnorm = 3.534156271e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.667837116e-12
MLMG: Iteration   9 Crse resid/bnorm = 2.767420095e-13
MLMG: Final Iter. 9 resid, resid/bnorm = 5.970557382e-12, 1.667837116e-12
MLMG: Timers: Solve = 0.055439184 Iter = 0.053258767 Bottom = 0.013938743
 >> After projection
  * On level 0 max(abs(diveu)) = 1.331178811e-10
  * On level 1 max(abs(diveu)) = 1.439894289e-10
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.421927837  1.421927837  5.381027705e-13
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.44932508  1.44932508  1.230644213e-12
   max(abs(gpx/gpy/gpz))  = 0  0  0
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.868349231
  * On lev 1 max(abs(rhs)) = 4.450780295

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.450780295
MLMG: Initial residual (resid0) = 4.450780295
MLMG: Iteration   1 Fine resid/bnorm = 0.008200357351
MLMG: Iteration   2 Fine resid/bnorm = 0.0001084397312
MLMG: Iteration   3 Fine resid/bnorm = 1.572860989e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.604422295e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.635058131e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.574883732e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.583341681e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.616572376e-12
MLMG: Iteration   8 Crse resid/bnorm = 8.452635409e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.67012501e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.081940434e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 4.042172153e-11, 9.081940434e-12
MLMG: Timers: Solve = 0.129995485 Iter = 0.108434177 Bottom = 0.012774052
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.412892591  1.412892591  5.552020852e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.444279231  1.444279231  1.191065148e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 1
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1268.631777
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 2.703710049
MLMG: Initial residual (resid0) = 2.703710049
MLMG: Iteration   1 Fine resid/bnorm = 0.0227540725
MLMG: Iteration   2 Fine resid/bnorm = 0.001312338683
MLMG: Iteration   3 Fine resid/bnorm = 5.738866024e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.763596934e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.351101437e-07
MLMG: Iteration   6 Fine resid/bnorm = 6.581439711e-09
MLMG: Iteration   7 Fine resid/bnorm = 3.146698125e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.456636177e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.480838791e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.553635261e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.752230897e-12, 6.480838791e-13
MLMG: Timers: Solve = 0.055286887 Iter = 0.053809255 Bottom = 0.014326044
 >> After projection
  * On level 0 max(abs(diveu)) = 2.496457417e-11
  * On level 1 max(abs(diveu)) = 3.327958933e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.413257555  1.413257555  5.560359829e-13
   max(abs(gpx/gpy/gpz))  = 14.29470424  14.29470424  4.554602982e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.446760784  1.446760784  1.184132787e-12
   max(abs(gpx/gpy/gpz))  = 22.99981057  22.99981057  9.093958636e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1506950811
  * On lev 1 max(abs(rhs)) = 0.6926960268

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.6926960268
MLMG: Initial residual (resid0) = 0.6926960268
MLMG: Iteration   1 Fine resid/bnorm = 0.001849722311
MLMG: Iteration   2 Fine resid/bnorm = 2.501641791e-05
MLMG: Iteration   3 Fine resid/bnorm = 4.744685426e-07
MLMG: Iteration   4 Fine resid/bnorm = 1.344941759e-08
MLMG: Iteration   5 Fine resid/bnorm = 6.47455686e-10
MLMG: Iteration   6 Fine resid/bnorm = 5.55115698e-11
MLMG: Iteration   7 Fine resid/bnorm = 5.568266406e-12
MLMG: Iteration   7 Crse resid/bnorm = 4.860975995e-10
MLMG: Iteration   8 Fine resid/bnorm = 5.537924223e-13
MLMG: Iteration   8 Crse resid/bnorm = 4.831351061e-11
MLMG: Iteration   9 Fine resid/bnorm = 5.502463236e-14
MLMG: Iteration   9 Crse resid/bnorm = 4.829498515e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.345374433e-12, 4.829498515e-12
MLMG: Timers: Solve = 0.12732027 Iter = 0.108960028 Bottom = 0.011894633
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.411472903  1.411472903  5.097734728e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443343816  1.443343816  1.145996672e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs

In initial_iterations: iter = 2
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1241.71498
  * On level 1 max(abs(diveu)) = 804.1010569
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.045209593
MLMG: Initial residual (resid0) = 3.045209593
MLMG: Iteration   1 Fine resid/bnorm = 0.02144402612
MLMG: Iteration   2 Fine resid/bnorm = 0.001136924491
MLMG: Iteration   3 Fine resid/bnorm = 4.908648375e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.380430986e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.182157887e-07
MLMG: Iteration   6 Fine resid/bnorm = 5.886826686e-09
MLMG: Iteration   7 Fine resid/bnorm = 2.88919727e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.380072241e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.352260827e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.913205495e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.934396561e-12, 6.352260827e-13
MLMG: Timers: Solve = 0.055293111 Iter = 0.053824861 Bottom = 0.014620201
 >> After projection
  * On level 0 max(abs(diveu)) = 2.773506667e-11
  * On level 1 max(abs(diveu)) = 3.104981315e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.411134907  1.411134907  5.047548129e-13
   max(abs(gpx/gpy/gpz))  = 13.64729674  13.64729674  2.106572881e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.444574838  1.444574838  1.140069222e-12
   max(abs(gpx/gpy/gpz))  = 22.89907128  22.89907128  6.202314505e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 0.1175394335
  * On lev 1 max(abs(rhs)) = 0.4623192407

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 0.4623192407
MLMG: Initial residual (resid0) = 0.4623192407
MLMG: Iteration   1 Fine resid/bnorm = 0.0003000102902
MLMG: Iteration   2 Fine resid/bnorm = 2.70517134e-06
MLMG: Iteration   3 Fine resid/bnorm = 6.80597581e-08
MLMG: Iteration   4 Fine resid/bnorm = 4.434232778e-09
MLMG: Iteration   5 Fine resid/bnorm = 3.483457511e-10
MLMG: Iteration   6 Fine resid/bnorm = 2.851244396e-11
MLMG: Iteration   7 Fine resid/bnorm = 2.400235063e-12
MLMG: Iteration   7 Crse resid/bnorm = 2.427207642e-10
MLMG: Iteration   8 Fine resid/bnorm = 2.070625054e-13
MLMG: Iteration   8 Crse resid/bnorm = 2.382134929e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.825079781e-14
MLMG: Iteration   9 Crse resid/bnorm = 2.351341058e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 1.087070212e-12, 2.351341058e-12
MLMG: Timers: Solve = 0.126050568 Iter = 0.109807638 Bottom = 0.012586609
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.410660702  1.410660702  5.329728317e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.443314257  1.443314257  1.221223991e-12
On level 0: set velocity bcs
On level 0: set density bcs
On level 1: set velocity bcs
On level 1: set density bcs
Time spent in init      1.673821398

On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00000 at time 0

 ============   NEW TIME STEP   ============ 
On level 0: set density bcs
On level 1: set density bcs

   Step 1: from old_time 0 to new time 0.004063884623 with dt = 0.004063884623

On level 0 fillpatch vel
On level 0 fillpatch rho
On level 1 fillpatch vel
On level 1 fillpatch rho
 Finished fillpatch before predictor
On level 0: set density bcs
On level 1: set density bcs
MAC Projection:
On level 0 fillpatch none
On level 1 fillpatch none
 >> Before projection
  * On level 0 max(abs(diveu)) = 1213.047639
  * On level 1 max(abs(diveu)) = 794.6649206
MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 3.031413041
MLMG: Initial residual (resid0) = 3.031413041
MLMG: Iteration   1 Fine resid/bnorm = 0.0211598841
MLMG: Iteration   2 Fine resid/bnorm = 0.001120907939
MLMG: Iteration   3 Fine resid/bnorm = 4.818032549e-05
MLMG: Iteration   4 Fine resid/bnorm = 2.337859613e-06
MLMG: Iteration   5 Fine resid/bnorm = 1.161924107e-07
MLMG: Iteration   6 Fine resid/bnorm = 5.783448123e-09
MLMG: Iteration   7 Fine resid/bnorm = 2.834753584e-10
MLMG: Iteration   8 Fine resid/bnorm = 1.348583717e-11
MLMG: Iteration   9 Fine resid/bnorm = 6.168742029e-13
MLMG: Iteration   9 Crse resid/bnorm = 5.916197632e-14
MLMG: Final Iter. 9 resid, resid/bnorm = 1.870000503e-12, 6.168742029e-13
MLMG: Timers: Solve = 0.055554001 Iter = 0.0540898 Bottom = 0.014954097
 >> After projection
  * On level 0 max(abs(diveu)) = 2.219242002e-11
  * On level 1 max(abs(diveu)) = 3.086473995e-11
On level 0 fillpatch none
On level 1 fillpatch none
On level 0: set velocity bcs
On level 1: set velocity bcs
On level 0: set velocity bcs
On level 1: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.428493091  1.428493091  5.373663638e-13
   max(abs(gpx/gpy/gpz))  = 14.22686542  14.22686542  1.829862761e-11
Min and Max of epf 1 1
On level 0: set velocity bcs
Before projection:
   max(abs(u/v/w))  = 1.45389342  1.45389342  1.260838292e-12
   max(abs(gpx/gpy/gpz))  = 22.61435987  22.61435987  6.080868237e-11
Min and Max of epf 1 1
On level 1: set velocity bcs
On level 0: set vec bcs
On level 1: set vec bcs
Nodal Projection:
 >> Before projection:
  * On lev 0 max(abs(rhs)) = 1.736147373
  * On lev 1 max(abs(rhs)) = 4.278885761

MLMG: # of AMR levels: 2
      # of MG levels on the coarsest AMR level: 2
MLMG: Initial rhs               = 4.278885761
MLMG: Initial residual (resid0) = 4.278885761
MLMG: Iteration   1 Fine resid/bnorm = 0.007586520303
MLMG: Iteration   2 Fine resid/bnorm = 9.935873836e-05
MLMG: Iteration   3 Fine resid/bnorm = 1.43932637e-06
MLMG: Iteration   4 Fine resid/bnorm = 2.423448441e-08
MLMG: Iteration   5 Fine resid/bnorm = 1.460939561e-09
MLMG: Iteration   6 Fine resid/bnorm = 1.468454881e-10
MLMG: Iteration   7 Fine resid/bnorm = 1.489653832e-11
MLMG: Iteration   8 Fine resid/bnorm = 1.522028391e-12
MLMG: Iteration   8 Crse resid/bnorm = 8.526644348e-11
MLMG: Iteration   9 Fine resid/bnorm = 1.572660641e-13
MLMG: Iteration   9 Crse resid/bnorm = 9.138268188e-12
MLMG: Final Iter. 9 resid, resid/bnorm = 3.910160563e-11, 9.138268188e-12
MLMG: Timers: Solve = 0.124961694 Iter = 0.108609332 Bottom = 0.012617903
On level 0: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.424434101  1.424434101  2.189122382e-13
On level 1: set velocity bcs
After  projection:
   max(abs(u/v/w))  = 1.449976148  1.449976148  6.62986488e-13
   Time per fluid step      0.458722731
   Time per step        0.460091882
On level 0 fillpatch vel
On level 1 fillpatch vel
  Writing plotfile BENCH09-refinement_plt00001 at time 0.004063884623
On level 0 fillpatch vel
On level 1 fillpatch vel
Time spent in main (after init) 0.470476084
Time spent in main      2.144297482

AMReX (26.09-175-gf2e8bf0a946a) finalized