Initializing AMReX (26.10-74-g47ceffc47cea)... MPI initialized with 1 MPI processes MPI initialized with thread support level 0 OMP initialized with 1 OMP threads AMReX (26.10-74-g47ceffc47cea) initialized MFIX git describe: 26.10-21-gb00fa2e2f18e AMReX-Hydro git hash: a153304acd787205b170b0f7fd8284627e076056 Number of levels: 1 RunType is Standard Auto-generating level-set parameters: eb_refinement = 1 levelset_pad = 8 eb_pad = 8 ================================================================================ Warning: Overwriting amr.check_file with value from mfix.check_file ================================================================================ ================================================================================ Warning: Overwriting amr.plt_regtest with value from mfix.plt_regtest ================================================================================ ================================================================================ Warning: Overwriting amr.plot_int with value from output.plot.int ================================================================================ ================================================================================ Warning: Overwriting amr.plot_file with value from output.plot.file ================================================================================ Simulation is transient ================================================================================ Warning: mfix.stop_time and mfix.max_step are both defined. The simulation will end when either condition is met. ================================================================================ -------------------------------------------------------------------------------- Info: Max effective viscosity factor not specified. Using default 1e+06 -------------------------------------------------------------------------------- Scalar diffusion coefficients Tracer0: 0 Particle-particle conduction is disabled. Particle-fluid-particle conduction is disabled. Specified constant pressure drop: (1000,0,0) Load balance setup: Type: SingleGrid Strategy: KnapSack Weighting: ParticleRunTime ================================================================================ Warning: Regridding disabled for single level, single rank run. ================================================================================ Drag model: BVK2 Convection model not specified. Setting default: mfix.convection.model = RanzMarshall Building cylinder geometry. Internal Flow: 1 Radius: 0.49 Height: -1 Direction: 0 Rotation angle: 0 Rotation axis: 0 Center: 0.5, 1.5, 1.5 Done making the fluid eb levels ... PostProcessBaseGrids Making new level 0 from scratch On level 0 updated BC areas: Auto generating particles ... Total number of generated particles: 2,578 Time spent in initializing particles 0.016937044 **************************************** Coverage report: Grids Cells regular: 0 45 covered: 0 1000 cut: 1 80 **************************************** Clean up auto-generated particles. IC Region Generated Removed Remaining **************** **************** **************** **************** fluid-only 0 0 0 bed 2,578 2,409 169 ---------------- ---------------- ---------------- ---------------- Total 2,578 2,409 169 **************** **************** **************** **************** On level 0: set volume fraction bcs Setting original sum_vol to 0.644240679 On level 0 fillpatch epf On level 0 fillpatch rho On level 0 fillpatch vel On level 0 fillpatch tracer On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Initial projection: Before projection: max(abs(u/v/w)) = 0 1.301306859 1.301322376 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 0.4567430634 0.4800854565 0.4809140291 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Doing initial pressure iterations with dt = 0.006985626321 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs In initial_iterations: iter = 0 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.014922713 MLMG: Initial rhs = 2.939787525 MLMG: Initial residual (resid0) = 2.939787525 MLMG: Final Iter. 12 resid, resid/bnorm = 3.914646385e-13, 1.331608611e-13 MLMG: Timers: Solve = 0.003240298 Iter = 0.003159161 Bottom = 0.002807182 >> After projection * On level 0 max(abs(diveu)) = 6.439641517e-13 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 7.061234525 0.4178331991 0.4194110585 max(abs(gpx/gpy/gpz)) = 0 0 0 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 7.351316345 0.4999052539 0.4720026973 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 1 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.014922713 MLMG: Initial rhs = 4.235152816 MLMG: Initial residual (resid0) = 4.235152816 MLMG: Final Iter. 12 resid, resid/bnorm = 5.191402863e-13, 1.225788794e-13 MLMG: Timers: Solve = 0.003468673 Iter = 0.003393295 Bottom = 0.003033627 >> After projection * On level 0 max(abs(diveu)) = 8.527604679e-13 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 7.1759634 0.4503082794 0.4674320756 max(abs(gpx/gpy/gpz)) = 249.0930276 38.59268257 25.15683598 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 7.277419843 0.5341353654 0.4867119213 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs In initial_iterations: iter = 2 On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.014922713 MLMG: Initial rhs = 5.173387006 MLMG: Initial residual (resid0) = 5.173387006 MLMG: Final Iter. 11 resid, resid/bnorm = 4.530931186e-12, 8.758152406e-13 MLMG: Timers: Solve = 0.002972216 Iter = 0.002908094 Bottom = 0.00258581 >> After projection * On level 0 max(abs(diveu)) = 7.462925028e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 7.2778468 0.5072327003 0.48084908 max(abs(gpx/gpy/gpz)) = 308.8304319 57.74540961 36.92068883 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set velocity bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 7.266472363 0.5465821317 0.4884482975 On level 0: set velocity bcs On level 0: set density bcs On level 0: set tracer bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set species bcs Enclosed domain volume is 0.644240679 Time spent in init 0.247470036 Writing plotfile TracerAdv-Godunov_plt00000 at time 0 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 1: from old_time 0 to new time 0.006068397973 with dt = 0.006068397973 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 8.01455891 MLMG: Initial rhs = 4.538492123 MLMG: Initial residual (resid0) = 4.538492123 MLMG: Final Iter. 11 resid, resid/bnorm = 4.383993168e-12, 9.65958087e-13 MLMG: Timers: Solve = 0.00294087 Iter = 0.002872633 Bottom = 0.002546071 >> After projection * On level 0 max(abs(diveu)) = 7.220648677e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 6.215834383 0.4307556355 0.4253974752 max(abs(gpx/gpy/gpz)) = 329.2140632 65.89314165 41.92100673 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 6.518800914 0.4579492423 0.430670088 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.006068397973 done. Time per fluid step 0.020697385 Time per 1 particle steps 8.9938e-05 Coupling time per step 0.001946033 Sum tracer volume wgt = 157.3035547 141.6086716 Time per step 0.023376668 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 2: from old_time 0.006068397973 to new time 0.01157806183 with dt = 0.005509663855 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 7.360502699 MLMG: Initial rhs = 7.360502699 MLMG: Initial residual (resid0) = 7.360502699 MLMG: Final Iter. 11 resid, resid/bnorm = 1.651123682e-12, 2.243221353e-13 MLMG: Timers: Solve = 0.003084549 Iter = 0.00301817 Bottom = 0.002648895 >> After projection * On level 0 max(abs(diveu)) = 2.717910727e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 10.53479249 0.4213821986 0.3787316718 max(abs(gpx/gpy/gpz)) = 302.2296074 52.68727651 40.56956922 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 11.80137698 0.5846260974 0.5064974556 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.005509663855 done. Time per fluid step 0.021152415 Time per 1 particle steps 4.6302e-05 Coupling time per step 0.001937672 Sum tracer volume wgt = 157.6376738 141.599725 Time per step 0.02374685 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 3: from old_time 0.01157806183 to new time 0.01628927721 with dt = 0.004711215377 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 15.34930113 MLMG: Initial rhs = 15.34930113 MLMG: Initial residual (resid0) = 15.34930113 MLMG: Final Iter. 11 resid, resid/bnorm = 3.232969448e-12, 2.106264918e-13 MLMG: Timers: Solve = 0.002948012 Iter = 0.002879766 Bottom = 0.002554086 >> After projection * On level 0 max(abs(diveu)) = 5.250482949e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 14.45275856 0.5457276322 0.4526241751 max(abs(gpx/gpy/gpz)) = 474.5219618 87.37388575 55.17581586 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 15.93937577 0.7915939699 0.6747518296 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.004711215377 done. Time per fluid step 0.019821954 Time per 1 particle steps 4.5379e-05 Coupling time per step 0.00185381 Sum tracer volume wgt = 158.1850389 141.5894432 Time per step 0.022223044 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 4: from old_time 0.01628927721 to new time 0.020439291 with dt = 0.004150013799 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 20.81031662 MLMG: Initial rhs = 20.81031662 MLMG: Initial residual (resid0) = 20.81031662 MLMG: Final Iter. 11 resid, resid/bnorm = 2.942535104e-12, 1.413979017e-13 MLMG: Timers: Solve = 0.003197433 Iter = 0.003129977 Bottom = 0.002795962 >> After projection * On level 0 max(abs(diveu)) = 4.466716046e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 17.59080923 0.7206832561 0.5483731794 max(abs(gpx/gpy/gpz)) = 668.6922842 125.4554954 79.81588793 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 18.98048893 1.003453466 0.7686163942 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.004150013799 done. Time per fluid step 0.020011737 Time per 1 particle steps 4.5417e-05 Coupling time per step 0.001889154 Sum tracer volume wgt = 158.9097383 141.5955104 Time per step 0.022445055 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 5: from old_time 0.020439291 to new time 0.02420525564 with dt = 0.003765964631 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 24.72567974 MLMG: Initial rhs = 24.72567974 MLMG: Initial residual (resid0) = 24.72567974 MLMG: Final Iter. 11 resid, resid/bnorm = 4.239627079e-12, 1.714665532e-13 MLMG: Timers: Solve = 0.002958288 Iter = 0.002891232 Bottom = 0.002563911 >> After projection * On level 0 max(abs(diveu)) = 6.438043771e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 20.07128065 0.9118520967 0.6397007301 max(abs(gpx/gpy/gpz)) = 845.0554477 154.1665177 101.8846597 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 21.20636845 1.207842605 0.8966733885 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.003765964631 done. Time per fluid step 0.019723794 Time per 1 particle steps 4.3944e-05 Coupling time per step 0.002069401 Sum tracer volume wgt = 159.7980423 141.5978094 Time per step 0.022330628 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 6: from old_time 0.02420525564 to new time 0.02772313799 with dt = 0.003517882355 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 27.77501344 MLMG: Initial rhs = 27.77501344 MLMG: Initial residual (resid0) = 27.77501344 MLMG: Final Iter. 11 resid, resid/bnorm = 5.37913159e-12, 1.936680103e-13 MLMG: Timers: Solve = 0.002953085 Iter = 0.002886204 Bottom = 0.002561568 >> After projection * On level 0 max(abs(diveu)) = 8.477929312e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 22.02385299 1.069621741 0.7874477673 max(abs(gpx/gpy/gpz)) = 974.461326 171.6281193 118.4991314 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 22.85887434 1.363177947 0.9899721722 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.003517882355 done. Time per fluid step 0.02006485 Time per 1 particle steps 4.5939e-05 Coupling time per step 0.001886314 Sum tracer volume wgt = 160.7130448 141.6030277 Time per step 0.022492792 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 7: from old_time 0.02772313799 to new time 0.0310739383 with dt = 0.003350800308 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 30.00783429 MLMG: Initial rhs = 29.84130381 MLMG: Initial residual (resid0) = 29.84130381 MLMG: Final Iter. 11 resid, resid/bnorm = 5.559996907e-12, 1.863188332e-13 MLMG: Timers: Solve = 0.003175732 Iter = 0.003108893 Bottom = 0.002780102 >> After projection * On level 0 max(abs(diveu)) = 9.140267539e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 23.55717699 1.214115399 0.9019173378 max(abs(gpx/gpy/gpz)) = 1068.685291 180.3533505 129.2181015 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 24.11104711 1.461736638 1.046157396 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.003350800308 done. Time per fluid step 0.020203666 Time per 1 particle steps 4.5972e-05 Coupling time per step 0.001892177 Sum tracer volume wgt = 161.5635416 141.5956539 Time per step 0.022691268 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 8: from old_time 0.0310739383 to new time 0.03430741904 with dt = 0.003233480739 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 32.77876823 MLMG: Initial rhs = 30.79375563 MLMG: Initial residual (resid0) = 30.79375563 MLMG: Final Iter. 11 resid, resid/bnorm = 4.038880341e-12, 1.311590697e-13 MLMG: Timers: Solve = 0.002954289 Iter = 0.002887981 Bottom = 0.002562236 >> After projection * On level 0 max(abs(diveu)) = 6.635002244e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 24.7556625 1.287534788 0.97831641 max(abs(gpx/gpy/gpz)) = 1136.190928 183.3300074 135.9144918 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 25.08250589 1.469522297 1.072862294 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.003233480739 done. Time per fluid step 0.020063357 Time per 1 particle steps 4.5255e-05 Coupling time per step 0.002122788 Sum tracer volume wgt = 162.2830748 141.6043557 Time per step 0.022818575 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 9: from old_time 0.03430741904 to new time 0.0374550062 with dt = 0.003147587166 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 34.43227344 MLMG: Initial rhs = 31.16671936 MLMG: Initial residual (resid0) = 31.16671936 MLMG: Final Iter. 11 resid, resid/bnorm = 4.91157115e-12, 1.575902517e-13 MLMG: Timers: Solve = 0.002975326 Iter = 0.002908136 Bottom = 0.002581419 >> After projection * On level 0 max(abs(diveu)) = 8.103766313e-12 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 25.68046672 1.298670425 1.006026968 max(abs(gpx/gpy/gpz)) = 1183.311174 181.7432301 150.2515545 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 25.86023797 1.424437719 1.079168904 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.003147587166 done. Time per fluid step 0.020244546 Time per 1 particle steps 4.6049e-05 Coupling time per step 0.00203231 Sum tracer volume wgt = 162.7998141 141.6113585 Time per step 0.022874137 ============ NEW TIME STEP ============ On level 0: set density bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs On level 0: set volume fraction bcs Step 10: from old_time 0.0374550062 to new time 0.0405315319 with dt = 0.003076525696 On level 0 fillpatch vel On level 0 fillpatch rho On level 0 fillpatch h On level 0 fillpatch T On level 0 fillpatch X On level 0 fillpatch tracer Finished fillpatch before predictor On level 0: set density bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set species bcs MAC Projection: On level 0 fillpatch none >> Before projection * On level 0 max(abs(diveu)) = 35.3671656 MLMG: Initial rhs = 31.22551699 MLMG: Initial residual (resid0) = 31.22551699 MLMG: Final Iter. 10 resid, resid/bnorm = 2.028799351e-11, 6.497248233e-13 MLMG: Timers: Solve = 0.002688613 Iter = 0.002620898 Bottom = 0.002318756 >> After projection * On level 0 max(abs(diveu)) = 3.322381509e-11 On level 0 fillpatch none On level 0 fillpatch rho On level 0: set species bcs On level 0: set species bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set temperature bcs On level 0: set enthalpy bcs On level 0: set tracer bcs On level 0: set tracer bcs On level 0: set velocity bcs On level 0: set velocity bcs Before projection: max(abs(u/v/w)) = 26.3729032 1.263628472 0.9953502275 max(abs(gpx/gpy/gpz)) = 1239.561288 177.6672985 159.8844213 Min and Max of epf 0.7033339221 0.9996153806 On level 0: set velocity bcs On level 0: set vec bcs On level 0 fillpatch vel On level 0: set velocity bcs After projection: max(abs(u/v/w)) = 26.49396734 1.405015157 1.049958663 On level 0: set velocity bcs On level 0: set temperature bcs On level 0: set velocity bcs Evolving particles on level: 0 ... with fluid dt 0.003076525696 done. Time per fluid step 0.020249781 Time per 1 particle steps 4.6429e-05 Coupling time per step 0.002010359 Sum tracer volume wgt = 163.0949237 141.6113866 Time per step 0.022894534 Writing plotfile TracerAdv-Godunov_plt00010 at time 0.0405315319 Time spent in main (after init) 0.231192323 Time spent in main 0.478662359 AMReX (26.10-74-g47ceffc47cea) finalized